Skip to contentSkip to conversation

Populate entries for 4.17

PATCH Superseded Henry Wang 3 participants 10 messages Nov 23, 2022

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Henry Wang

author
#0 lore raw

v4 cover Populate entries for 4.17

Hello,

The following changes are preparation work for the 4.17 release. Also collecting the changelog changes happened during the 4.17 dev phase. This is my first pass at the log for the release, it's likely missing more entries.

Thanks,
Henry

v3 -> v4:
- Use the corrected sentence for VIRT_SSBD and MSR_SPEC_CTRL
- Clarify that the virtio-mmio toolstack for ARM is only creating the device-tree binding.
- Remove the "initial" in i.MX entry.
- Add my own sign-off in patch #2 because I changed the original wording. v2 -> v3:
- Move the uncertain release date to patch #3.
- Remove the "on x86" for __ro_after_init, as Arm also supports the __ro_after_init.
- Take the opportunity in patch #3 to also adjust the 4.17 entry since this patch will be applied only after branching.
v1 -> v2:
- Pick other changelog patches happened during the 4.17 dev phase.
- Correct wording for two x86 entries (clock frequency calibration and SPR & ADL support) following Jan's suggestion.
- Add missing Arm entries from Oleksandr.
- Add missing i.MX entry following Stefano's suggestion.

Andrew Cooper (1):
Changelog: Add __ro_after_init and CET

Henry Wang (2):
CHANGELOG: Add missing entries for work during the 4.17 release
CHANGELOG: Start new "unstable" section

 CHANGELOG.md | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v4 1/3 CHANGELOG: Add missing entries for work during the 4.17 release

---
v3 -> v4:
- Use the corrected sentence for VIRT_SSBD and MSR_SPEC_CTRL
- Clarify that the virtio-mmio toolstack for ARM is only creating the device-tree binding.
- Remove the "initial" in i.MX entry.
v2 -> v3:
- Move the uncertain release date to patch #3.
v1 -> v2:
- Correct wording for two x86 entries (clock frequency calibration and SPR & ADL support) following Jan's suggestion.
- Add missing Arm entries from Oleksandr.
- Add missing i.MX entry following Stefano's suggestion.

---
 CHANGELOG.md | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
CHANGELOG.md +29 -2
index adbbb216fa..8fa8b198b3 100644
@@ -4,16 +4,43 @@ Notable changes to Xen will be documented in this file.
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/)
 
-## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD
+## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging)
 
 ### Changed
  - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that
    this requires use of "multiboot2" (and "module2") as the GrUB commands loading Xen.
+ - The "gnttab" option now has a new command line sub-option for disabling the
+   GNTTABOP_transfer functionality.
+ - The x86 MCE command line option info is now updated.
 
 ### Added / support upgraded
+ - Out-of-tree builds for the hypervisor now supported.
+ - The project has officially adopted 4 directives and 24 rules of MISRA-C,
+   added MISRA-C checker build integration, and defined how to document
+   deviations.
  - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVH ones
    when they don't share page tables with the CPU (HAP / EPT / NPT).
- - Support VIRT_SSBD feature for HVM guests on AMD.
+ - Support for VIRT_SSBD and MSR_SPEC_CTRL for HVM guests on AMD.
+ - Improved TSC, CPU, and APIC clock frequency calibration on x86.
+ - Add mwait-idle support for SPR and ADL on x86.
+ - Extend security support for hosts to 12 TiB of memory on x86.
+ - Add command line option to set cpuid parameters for dom0 at boot time on x86.
+ - Improved static configuration options on Arm.
+ - cpupools can be specified at boot using device tree on Arm.
+ - It is possible to use PV drivers with dom0less guests, allowing statically
+   booted dom0less guests with PV devices.
+ - On Arm, p2m structures are now allocated out of a pool of memory set aside at
+   domain creation.
+ - Improved mitigations against Spectre-BHB on Arm.
+ - Support VirtIO-MMIO devices device-tree binding creation in toolstack on Arm.
+ - Allow setting the number of CPUs to activate at runtime from command line
+   option on Arm.
+ - Grant-table support on Arm was improved and hardened by implementing
+   "simplified M2P-like approach for the xenheap pages"
+ - Add Renesas R-Car Gen4 IPMMU-VMSA support on Arm.
+ - Add i.MX lpuart and i.MX8QM support on Arm.
+ - Improved toolstack build system.
+ - Add Xue - console over USB 3 Debug Capability.
 
 ### Removed / support downgraded
  - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options
Signature · 1 line
2.25.1
#3 lore raw

Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release

In reply to Henry Wang

Hi Henry,

Quoted 57 lines · Henry Wang

---
v3 -> v4:
- Use the corrected sentence for VIRT_SSBD and MSR_SPEC_CTRL
- Clarify that the virtio-mmio toolstack for ARM is only creating the device-tree binding.
- Remove the "initial" in i.MX entry.
v2 -> v3:
- Move the uncertain release date to patch #3.
v1 -> v2:
- Correct wording for two x86 entries (clock frequency calibration and SPR & ADL support) following Jan's suggestion.
- Add missing Arm entries from Oleksandr.
- Add missing i.MX entry following Stefano's suggestion.

---
 CHANGELOG.md | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
CHANGELOG.md +19 -2
index adbbb216fa..8fa8b198b3 100644
@@ -4,16 +4,43 @@ Notable changes to Xen will be documented in this file.
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/)
 
-## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD
+## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging)
 
 ### Changed
  - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that
    this requires use of "multiboot2" (and "module2") as the GrUB commands loading Xen.
+ - The "gnttab" option now has a new command line sub-option for disabling the
+   GNTTABOP_transfer functionality.
+ - The x86 MCE command line option info is now updated.
 
 ### Added / support upgraded
+ - Out-of-tree builds for the hypervisor now supported.
+ - The project has officially adopted 4 directives and 24 rules of MISRA-C,
+   added MISRA-C checker build integration, and defined how to document
+   deviations.
  - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVH ones
    when they don't share page tables with the CPU (HAP / EPT / NPT).
- - Support VIRT_SSBD feature for HVM guests on AMD.
+ - Support for VIRT_SSBD and MSR_SPEC_CTRL for HVM guests on AMD.
+ - Improved TSC, CPU, and APIC clock frequency calibration on x86.
+ - Add mwait-idle support for SPR and ADL on x86.
+ - Extend security support for hosts to 12 TiB of memory on x86.
+ - Add command line option to set cpuid parameters for dom0 at boot time on x86.
+ - Improved static configuration options on Arm.
+ - cpupools can be specified at boot using device tree on Arm.
+ - It is possible to use PV drivers with dom0less guests, allowing statically
+   booted dom0less guests with PV devices.
+ - On Arm, p2m structures are now allocated out of a pool of memory set aside at
+   domain creation.

CHANGELOG.md Notable changes to Xen will be documented in this file. · line 43

Quoted 10 lines
CHANGELOG.md +10 -0
+ - Improved mitigations against Spectre-BHB on Arm.
+ - Support VirtIO-MMIO devices device-tree binding creation in toolstack on Arm.
+ - Allow setting the number of CPUs to activate at runtime from command line
+   option on Arm.
+ - Grant-table support on Arm was improved and hardened by implementing
+   "simplified M2P-like approach for the xenheap pages"
+ - Add Renesas R-Car Gen4 IPMMU-VMSA support on Arm.
+ - Add i.MX lpuart and i.MX8QM support on Arm.
+ - Improved toolstack build system.
+ - Add Xue - console over USB 3 Debug Capability.

Looking at the "Added" section for the previous releases, we seem to mention the changes to CI (automation/) as well. Because there were quite a few changes done in this release, adding at least the following, can be beneficial (something to consider):
- gitlab-ci automation: Fixes and improvements together with new tests

Quoted 7 lines
CHANGELOG.md +0 -1
 ### Removed / support downgraded
  - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options
--

2.25.1

~Michal

author
#4 lore raw

RE: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release

Hi Michal,

Quoted 9 lines

-----Original Message-----
Subject: Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Henry,
Looking at the "Added" section for the previous releases, we seem to mention the changes to CI (automation/) as well.
Because there were quite a few changes done in this release, adding at least the following, can be beneficial (something to consider):
- gitlab-ci automation: Fixes and improvements together with new tests

I only saw CI entries in 4.15 release, but if you want to add this I am ok with that. So I will wait for a day to see if people oppose this, if not I will add your suggested sentence in v5.

Kind regards,
Henry

#5 lore raw

Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release

Hi Henry,

Quoted 14 lines · Henry Wang

Hi Michal,

Quoted 9 lines

-----Original Message-----
Subject: Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Henry,
Looking at the "Added" section for the previous releases, we seem to mention the changes to CI (automation/) as well.
Because there were quite a few changes done in this release, adding at least the following, can be beneficial (something to consider):
- gitlab-ci automation: Fixes and improvements together with new tests

Quoted 1 line

I only saw CI entries in 4.15 release, but if you want to add this I am ok with that.

The CI entries are present in both 4.15 and 4.16:
4.15:
- CI loop: Add Alpine Linux, Ubuntu Focal targets; drop CentOS 6
- CI loop: Add qemu-based dom0 / domU test for ARM
- CI loop: Add dom0less aarch64 smoke test
4.16:
- 32bit Arm builds to the gitlab-ci automated tests.
- x86 full system tests to the gitlab-ci automated tests.

Quoted 5 lines

So I will wait for a day to see if people oppose this, if not I will add your suggested sentence in v5.

Kind regards,
Henry

~Michal

author
#6 lore raw

PATCH v4 2/3 Changelog: Add __ro_after_init and CET

In reply to Henry Wang

From: Andrew Cooper <[email protected]>

---
v3 -> v4:
- Add my own sign-off because I changed the original wording. v2 -> v3:
- Remove the "on x86" for __ro_after_init, as Arm also supports the __ro_after_init.
v1 -> v2:
- Include this patch in the series

---
 CHANGELOG.md | 4 ++++
 1 file changed, 4 insertions(+)
CHANGELOG.md +4 -0
index 8fa8b198b3..b315d59259 100644
@@ -15,6 +15,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/)
 
 ### Added / support upgraded
  - Out-of-tree builds for the hypervisor now supported.
+ - __ro_after_init support, for marking data as immutable after boot.
  - The project has officially adopted 4 directives and 24 rules of MISRA-C,
    added MISRA-C checker build integration, and defined how to document
    deviations.
@@ -22,6 +23,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/)
    when they don't share page tables with the CPU (HAP / EPT / NPT).
  - Support for VIRT_SSBD and MSR_SPEC_CTRL for HVM guests on AMD.
  - Improved TSC, CPU, and APIC clock frequency calibration on x86.
+ - Support for Xen using x86 Control Flow Enforcement technology for its own
+   protection. Both Shadow Stacks (ROP protection) and Indirect Branch
+   Tracking (COP/JOP protection).
  - Add mwait-idle support for SPR and ADL on x86.
  - Extend security support for hosts to 12 TiB of memory on x86.
  - Add command line option to set cpuid parameters for dom0 at boot time on x86.
Signature · 1 line
2.25.1
author
#8 lore raw

PATCH v4 3/3 CHANGELOG: Start new "unstable" section

In reply to Henry Wang

---
v3 -> v4:
- No change.
v2 -> v3:
- Take the opportunity to also adjust the 4.17 entry since this patch will be applied only after branching.
- Add 4.17 release date.
- Drop Julien's acked-by because of the content change. v1 -> v2:
- Add Julien's Acked-by.

---
 CHANGELOG.md | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
CHANGELOG.md +3 -1
index b315d59259..956b758e6b 100644
@@ -4,7 +4,9 @@ Notable changes to Xen will be documented in this file.
 
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/)
 
-## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging)
+## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD
+
+## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=RELEASE-4.17.0) - 2022-12-??
 
 ### Changed
  - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that
Signature · 1 line
2.25.1