Populate entries for 4.17
v4 cover Populate entries for 4.17
Hello,
The following changes are preparation work for the 4.17 release. Also collecting the changelog changes happened during the 4.17 dev phase. This is my first pass at the log for the release, it's likely missing more entries.
Thanks,
Henry
v3 -> v4:
- Use the corrected sentence for VIRT_SSBD and MSR_SPEC_CTRL
- Clarify that the virtio-mmio toolstack for ARM is only creating the device-tree binding.
- Remove the "initial" in i.MX entry.
- Add my own sign-off in patch #2 because I changed the original wording. v2 -> v3:
- Move the uncertain release date to patch #3.
- Remove the "on x86" for __ro_after_init, as Arm also supports the __ro_after_init.
- Take the opportunity in patch #3 to also adjust the 4.17 entry since this patch will be applied only after branching.
v1 -> v2:
- Pick other changelog patches happened during the 4.17 dev phase.
- Correct wording for two x86 entries (clock frequency calibration and SPR & ADL support) following Jan's suggestion.
- Add missing Arm entries from Oleksandr.
- Add missing i.MX entry following Stefano's suggestion.
Andrew Cooper (1):
Changelog: Add __ro_after_init and CET
Henry Wang (2):
CHANGELOG: Add missing entries for work during the 4.17 release
CHANGELOG: Start new "unstable" section
CHANGELOG.md | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1
PATCH v4 1/3 CHANGELOG: Add missing entries for work during the 4.17 release
---
v3 -> v4:
- Use the corrected sentence for VIRT_SSBD and MSR_SPEC_CTRL
- Clarify that the virtio-mmio toolstack for ARM is only creating the device-tree binding.
- Remove the "initial" in i.MX entry.
v2 -> v3:
- Move the uncertain release date to patch #3.
v1 -> v2:
- Correct wording for two x86 entries (clock frequency calibration and SPR & ADL support) following Jan's suggestion.
- Add missing Arm entries from Oleksandr.
- Add missing i.MX entry following Stefano's suggestion.
--- CHANGELOG.md | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)
CHANGELOG.md +29 -2
@@ -4,16 +4,43 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) -## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD +## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) ### Changed - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that this requires use of "multiboot2" (and "module2") as the GrUB commands loading Xen. + - The "gnttab" option now has a new command line sub-option for disabling the + GNTTABOP_transfer functionality. + - The x86 MCE command line option info is now updated. ### Added / support upgraded + - Out-of-tree builds for the hypervisor now supported. + - The project has officially adopted 4 directives and 24 rules of MISRA-C, + added MISRA-C checker build integration, and defined how to document + deviations. - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVH ones when they don't share page tables with the CPU (HAP / EPT / NPT). - - Support VIRT_SSBD feature for HVM guests on AMD. + - Support for VIRT_SSBD and MSR_SPEC_CTRL for HVM guests on AMD. + - Improved TSC, CPU, and APIC clock frequency calibration on x86. + - Add mwait-idle support for SPR and ADL on x86. + - Extend security support for hosts to 12 TiB of memory on x86. + - Add command line option to set cpuid parameters for dom0 at boot time on x86. + - Improved static configuration options on Arm. + - cpupools can be specified at boot using device tree on Arm. + - It is possible to use PV drivers with dom0less guests, allowing statically + booted dom0less guests with PV devices. + - On Arm, p2m structures are now allocated out of a pool of memory set aside at + domain creation. + - Improved mitigations against Spectre-BHB on Arm. + - Support VirtIO-MMIO devices device-tree binding creation in toolstack on Arm. + - Allow setting the number of CPUs to activate at runtime from command line + option on Arm. + - Grant-table support on Arm was improved and hardened by implementing + "simplified M2P-like approach for the xenheap pages" + - Add Renesas R-Car Gen4 IPMMU-VMSA support on Arm. + - Add i.MX lpuart and i.MX8QM support on Arm. + - Improved toolstack build system. + - Add Xue - console over USB 3 Debug Capability. ### Removed / support downgraded - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options
Signature · 1 line
2.25.1
Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Henry,
Quoted 1 line · Henry Wang
Signed-off-by Henry Wang <[email protected]>
Cheers,
Signature · 1 line
Julien Grall
Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
In reply to Henry WangHi Henry,
Quoted 57 lines · Henry Wang
Signed-off-by Henry Wang <[email protected]>---
v3 -> v4:
- Use the corrected sentence forVIRT_SSBDandMSR_SPEC_CTRL
- Clarify that the virtio-mmio toolstack for ARM is only creating the device-tree binding.
- Remove the "initial" in i.MX entry.
v2 -> v3:
- Move the uncertain release date to patch #3.
v1 -> v2:
- Correct wording for two x86 entries (clock frequency calibration and SPR & ADL support) following Jan's suggestion.
- Add missing Arm entries from Oleksandr.
- Add missing i.MX entry following Stefano's suggestion.--- CHANGELOG.md | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)CHANGELOG.md +19
-2@@ -4,16 +4,43 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) -## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD +## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) ### Changed - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that this requires use of "multiboot2" (and "module2") as the GrUB commands loading Xen. + - The "gnttab" option now has a new command line sub-option for disabling the + GNTTABOP_transfer functionality. + - The x86 MCE command line option info is now updated. ### Added / support upgraded + - Out-of-tree builds for the hypervisor now supported. + - The project has officially adopted 4 directives and 24 rules of MISRA-C, + added MISRA-C checker build integration, and defined how to document + deviations. - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVH ones when they don't share page tables with the CPU (HAP / EPT / NPT). - - Support VIRT_SSBD feature for HVM guests on AMD. + - Support for VIRT_SSBD and MSR_SPEC_CTRL for HVM guests on AMD. + - Improved TSC, CPU, and APIC clock frequency calibration on x86. + - Add mwait-idle support for SPR and ADL on x86. + - Extend security support for hosts to 12 TiB of memory on x86. + - Add command line option to set cpuid parameters for dom0 at boot time on x86. + - Improved static configuration options on Arm. + - cpupools can be specified at boot using device tree on Arm. + - It is possible to use PV drivers with dom0less guests, allowing statically + booted dom0less guests with PV devices. + - On Arm, p2m structures are now allocated out of a pool of memory set aside at + domain creation.
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 43
Quoted 10 lines
CHANGELOG.md +10
-0+ - Improved mitigations against Spectre-BHB on Arm. + - Support VirtIO-MMIO devices device-tree binding creation in toolstack on Arm. + - Allow setting the number of CPUs to activate at runtime from command line + option on Arm. + - Grant-table support on Arm was improved and hardened by implementing + "simplified M2P-like approach for the xenheap pages" + - Add Renesas R-Car Gen4 IPMMU-VMSA support on Arm. + - Add i.MX lpuart and i.MX8QM support on Arm. + - Improved toolstack build system. + - Add Xue - console over USB 3 Debug Capability.
Looking at the "Added" section for the previous releases, we seem to mention the changes to CI (automation/) as well. Because there were quite a few changes done in this release, adding at least the following, can be beneficial (something to consider):
- gitlab-ci automation: Fixes and improvements together with new tests
Quoted 7 lines
CHANGELOG.md +0
-1### Removed / support downgraded - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options --2.25.1
~Michal
RE: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Michal,
Quoted 9 lines
-----Original Message-----
Subject: Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Henry,
Looking at the "Added" section for the previous releases, we seem to mention the changes to CI (automation/) as well.
Because there were quite a few changes done in this release, adding at least the following, can be beneficial (something to consider):
- gitlab-ci automation: Fixes and improvements together with new tests
I only saw CI entries in 4.15 release, but if you want to add this I am ok with that. So I will wait for a day to see if people oppose this, if not I will add your suggested sentence in v5.
Kind regards,
Henry
Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Henry,
Quoted 14 lines · Henry Wang
Hi Michal,
Quoted 9 lines
-----Original Message-----
Subject: Re: [PATCH v4 1/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Henry,
Looking at the "Added" section for the previous releases, we seem to mention the changes to CI (automation/) as well.
Because there were quite a few changes done in this release, adding at least the following, can be beneficial (something to consider):
- gitlab-ci automation: Fixes and improvements together with new tests
Quoted 1 line
I only saw CI entries in 4.15 release, but if you want to add this I am ok with that.
The CI entries are present in both 4.15 and 4.16:
4.15:
- CI loop: Add Alpine Linux, Ubuntu Focal targets; drop CentOS 6
- CI loop: Add qemu-based dom0 / domU test for ARM
- CI loop: Add dom0less aarch64 smoke test
4.16:
- 32bit Arm builds to the gitlab-ci automated tests.
- x86 full system tests to the gitlab-ci automated tests.
Quoted 5 lines
So I will wait for a day to see if people oppose this, if not I will add your suggested sentence in v5.
Kind regards,
Henry
~Michal
PATCH v4 2/3 Changelog: Add __ro_after_init and CET
In reply to Henry WangFrom: Andrew Cooper <[email protected]>
---
v3 -> v4:
- Add my own sign-off because I changed the original wording. v2 -> v3:
- Remove the "on x86" for __ro_after_init, as Arm also supports the __ro_after_init.
v1 -> v2:
- Include this patch in the series
--- CHANGELOG.md | 4 ++++ 1 file changed, 4 insertions(+)
CHANGELOG.md +4 -0
@@ -15,6 +15,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) ### Added / support upgraded - Out-of-tree builds for the hypervisor now supported. + - __ro_after_init support, for marking data as immutable after boot. - The project has officially adopted 4 directives and 24 rules of MISRA-C, added MISRA-C checker build integration, and defined how to document deviations.
@@ -22,6 +23,9 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) when they don't share page tables with the CPU (HAP / EPT / NPT). - Support for VIRT_SSBD and MSR_SPEC_CTRL for HVM guests on AMD. - Improved TSC, CPU, and APIC clock frequency calibration on x86. + - Support for Xen using x86 Control Flow Enforcement technology for its own + protection. Both Shadow Stacks (ROP protection) and Indirect Branch + Tracking (COP/JOP protection). - Add mwait-idle support for SPR and ADL on x86. - Extend security support for hosts to 12 TiB of memory on x86. - Add command line option to set cpuid parameters for dom0 at boot time on x86.
Signature · 1 line
2.25.1
Re: [PATCH v4 2/3] Changelog: Add __ro_after_init and CET
Quoted 5 lines · Henry Wang
From: Andrew Cooper <[email protected]>
Signed-off-by Andrew Cooper <[email protected]>Signed-off-by Henry Wang <[email protected]>Reviewed-by Roger Pau Monné <[email protected]>
Cheers,
Signature · 1 line
Julien Grall
PATCH v4 3/3 CHANGELOG: Start new "unstable" section
In reply to Henry Wang---
v3 -> v4:
- No change.
v2 -> v3:
- Take the opportunity to also adjust the 4.17 entry since this patch will be applied only after branching.
- Add 4.17 release date.
- Drop Julien's acked-by because of the content change. v1 -> v2:
- Add Julien's Acked-by.
--- CHANGELOG.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
CHANGELOG.md +3 -1
@@ -4,7 +4,9 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) -## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) +## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD + +## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=RELEASE-4.17.0) - 2022-12-?? ### Changed - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that
Signature · 1 line
2.25.1
Re: [PATCH v4 3/3] CHANGELOG: Start new "unstable" section
Hi Henry,
Quoted 1 line · Henry Wang
Signed-off-by Henry Wang <[email protected]>
Cheers,
Signature · 1 line
Julien Grall