Skip to contentSkip to conversation

kbuild: add read-file macro

PATCH New Masahiro Yamada 1 participant 2 messages Dec 11, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 kbuild: add read-file macro

Since GNU Make 4.2, $(file ...) supports the read operater '<', which is useful to read a file without forking a new process. No warning is shown even if the input file is missing.

For older Make versions, it falls back to the cat command.

---

Changes in v3:
- Check the MAKE_VERSION in an ad-hoc way

 Makefile                  |  2 +-
 scripts/Kbuild.include    | 14 ++++++++++++++
 scripts/Makefile.modfinal |  2 +-
 scripts/Makefile.modinst  |  2 +-
 4 files changed, 17 insertions(+), 3 deletions(-)
Makefile +1 -1
index 8801cac4d3d5..2dda1e9a717a 100644
@@ -376,7 +376,7 @@ else # !mixed-build
 include $(srctree)/scripts/Kbuild.include
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELRELEASE = $(call read-file, include/config/kernel.release)
 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
scripts/Kbuild.include +14 -0
index 5019bc1e38e4..abdc269a51da 100644
@@ -10,6 +10,10 @@ empty   :=
 space   := $(empty) $(empty)
 space_escape := _-_SPACE_-_
 pound := \#
+define newline
+
+
+endef
 
 ###
 # Comparison macros.
@@ -61,6 +65,16 @@ stringify = $(squote)$(quote)$1$(quote)$(squote)
 kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile)
 
+###
+# Read a file, replacing newlines with spaces
+#
+# Make 4.2 or later can read a file by using its builtin function.
+ifneq ($(filter-out 3.% 4.0 4.1, $(MAKE_VERSION)),)
+read-file = $(subst $(newline),$(space),$(file < $1))
+else
+read-file = $(shell cat $1 2>/dev/null)
+endif
+
 ###
 # Easy method for doing a status message
        kecho := :
scripts/Makefile.modfinal +1 -1
index 25bedd83644b..7252f6cf7837 100644
@@ -13,7 +13,7 @@ include $(srctree)/scripts/Kbuild.include
 include $(srctree)/scripts/Makefile.lib
 
 # find all modules listed in modules.order
-modules := $(sort $(shell cat $(MODORDER)))
+modules := $(sort $(call read-file, $(MODORDER)))
 
 __modfinal: $(modules)
 	@:
scripts/Makefile.modinst +1 -1
index a4c987c23750..509d424dbbd2 100644
@@ -9,7 +9,7 @@ __modinst:
 include include/config/auto.conf
 include $(srctree)/scripts/Kbuild.include
 
-modules := $(sort $(shell cat $(MODORDER)))
+modules := $(sort $(call read-file, $(MODORDER)))
 
 ifeq ($(KBUILD_EXTMOD),)
 dst := $(MODLIB)/kernel
Signature · 1 line
2.34.1
#1 lore raw

PATCH v3 2/2 kconfig: refactor Makefile to reduce process forks

Refactor Makefile and use read-file macro. For Make >= 4.2, it can read out a file by using the built-in function.

---

Changes in v3:
- Clean up *conf-cflags *conf-libs *conf-bin by "make mrproper"

 scripts/kconfig/.gitignore   |  4 +++-
 scripts/kconfig/Makefile     | 45 +++++++++++++++++++-----------------
 scripts/kconfig/gconf-cfg.sh |  7 ++++--
 scripts/kconfig/mconf-cfg.sh | 25 +++++++++++---------
 scripts/kconfig/nconf-cfg.sh | 23 ++++++++++--------
 scripts/kconfig/qconf-cfg.sh | 10 +++++---
 scripts/remove-stale-files   |  2 ++
 7 files changed, 68 insertions(+), 48 deletions(-)
scripts/kconfig/.gitignore +3 -1
index 500e7424b3ef..c8a3f9cd52f0 100644
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 /conf
 /[gmnq]conf
-/[gmnq]conf-cfg
+/[gmnq]conf-cflags
+/[gmnq]conf-libs
+/qconf-bin
 /qconf-moc.cc
scripts/kconfig/Makefile +24 -21

77 lines not on this page · raw message

scripts/kconfig/gconf-cfg.sh +5 -2
index cbd90c28c05f..040d8f338820 100755
@@ -1,6 +1,9 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
@@ -26,5 +29,5 @@ if ! ${HOSTPKG_CONFIG} --atleast-version=2.0.0 gtk+-2.0; then
 	exit 1
 fi
 
-echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
scripts/kconfig/mconf-cfg.sh +14 -11
index 025b565e0b7c..1e61f50a5905 100755
@@ -1,19 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="ncursesw"
 PKG2="ncurses"
 
 if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	if ${HOSTPKG_CONFIG} --exists $PKG; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
 		exit 0
 	fi
 
-	if ${HOSTPKG_CONFIG} --exists $PKG2; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
+	if ${HOSTPKG_CONFIG} --exists ${PKG2}; then
+		${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs}
 		exit 0
 	fi
 fi
@@ -22,22 +25,22 @@ fi
 # (Even if it is installed, some distributions such as openSUSE cannot
 # find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
-	echo libs=\"-lncursesw\"
+	echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags}
+	echo -lncursesw > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
-	echo libs=\"-lncurses\"
+	echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags}
+	echo -lncurses > ${libs}
 	exit 0
 fi
 
 # As a final fallback before giving up, check if $HOSTCC knows of a default
 # ncurses installation (e.g. from a vendor-specific sysroot).
 if echo '#include <ncurses.h>' | ${HOSTCC} -E - >/dev/null 2>&1; then
-	echo cflags=\"-D_GNU_SOURCE\"
-	echo libs=\"-lncurses\"
+	echo -D_GNU_SOURCE > ${cflags}
+	echo -lncurses > ${libs}
 	exit 0
 fi
 
scripts/kconfig/nconf-cfg.sh +13 -10
index 3a10bac2adb3..f871a2160e36 100755
@@ -1,19 +1,22 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+
 PKG="ncursesw menuw panelw"
 PKG2="ncurses menu panel"
 
 if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	if ${HOSTPKG_CONFIG} --exists $PKG; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
 		exit 0
 	fi
 
 	if ${HOSTPKG_CONFIG} --exists $PKG2; then
-		echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
-		echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
+		${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags}
+		${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs}
 		exit 0
 	fi
 fi
@@ -22,20 +25,20 @@ fi
 # (Even if it is installed, some distributions such as openSUSE cannot
 # find ncurses by pkg-config.)
 if [ -f /usr/include/ncursesw/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\"
-	echo libs=\"-lncursesw -lmenuw -lpanelw\"
+	echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags}
+	echo -lncursesw -lmenuw -lpanelw > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\"
-	echo libs=\"-lncurses -lmenu -lpanel\"
+	echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags}
+	echo -lncurses -lmenu -lpanel > ${libs}
 	exit 0
 fi
 
 if [ -f /usr/include/ncurses.h ]; then
-	echo cflags=\"-D_GNU_SOURCE\"
-	echo libs=\"-lncurses -lmenu -lpanel\"
+	echo -D_GNU_SOURCE > ${cflags}
+	echo -lncurses -lmenu -lpanel > ${libs}
 	exit 0
 fi
 
scripts/kconfig/qconf-cfg.sh +7 -3
index ad652cb53947..117f36e568fc 100755
@@ -1,6 +1,10 @@
 #!/bin/sh
 # SPDX-License-Identifier: GPL-2.0
 
+cflags=$1
+libs=$2
+bin=$3
+
 PKG="Qt5Core Qt5Gui Qt5Widgets"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
@@ -11,9 +15,9 @@ if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
 fi
 
 if ${HOSTPKG_CONFIG} --exists $PKG; then
-	echo cflags=\"-std=c++11 -fPIC $(${HOSTPKG_CONFIG} --cflags $PKG)\"
-	echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
-	echo moc=\"$(${HOSTPKG_CONFIG} --variable=host_bins Qt5Core)/moc\"
+	${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
+	${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
+	${HOSTPKG_CONFIG} --variable=host_bins Qt5Core > ${bin}
 	exit 0
 fi
 
scripts/remove-stale-files +2 -0
index ccadfa3afb2b..64b14aa5aebf 100755
@@ -47,3 +47,5 @@ rm -f arch/riscv/purgatory/kexec-purgatory.c
 rm -f scripts/extract-cert
 
 rm -f arch/x86/purgatory/kexec-purgatory.c
+
+rm -f scripts/kconfig/[gmnq]conf-cfg
Signature · 1 line
2.34.1