package/rtl8723ds-bt: new package

PATCH Superseded Angelo Compagnucci 2 participants 5 messages Dec 13, 2022 – Dec 14, 2022

Share & tools

Angelo Compagnucci

author

2022-12-13 23:22 UTC #0 lore raw

PATCH v4 1/3 package/rtl8723ds-bt: new package

This package install the required firmware for enabling the Bluetooth device embedded in the RTL8723DS chip. The driver is included in Linux main tree and can be enabled with the BT_HCIUART_RTL symbol.

Signed-off-by Angelo Compagnucci <[email protected]>

---
v3:
* Simplified package (Thomas, Yann)
* Package now only installs firmware (Thomas, Yann)

 package/Config.in                      |  1 +
 package/rtl8723ds-bt/Config.in         |  6 ++++++
 package/rtl8723ds-bt/rtl8723ds-bt.hash |  2 ++
 package/rtl8723ds-bt/rtl8723ds-bt.mk   | 17 +++++++++++++++++
 4 files changed, 26 insertions(+)
 create mode 100644 package/rtl8723ds-bt/Config.in
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk

package/Config.in +1 -0

index 914c3584e9..999feae08a 100644
@@ -585,6 +585,7 @@ endmenu
 	source "package/rtl8192eu/Config.in"
 	source "package/rtl8723bu/Config.in"
 	source "package/rtl8723ds/Config.in"
+	source "package/rtl8723ds-bt/Config.in"
 	source "package/rtl8812au-aircrack-ng/Config.in"
 	source "package/rtl8821au/Config.in"
 	source "package/sane-backends/Config.in"

package/rtl8723ds-bt/Config.in new file +6 -0

new file mode 100644
index 0000000000..0a604310c0
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_RTL8723DS_BT
+	bool "rtl8723ds-bt"
+	help
+	  rtl8723ds UART attached Bluetooth module firmware.
+
+	  https://github.com/wsyco/RTL8723DS_BT_Linux

package/rtl8723ds-bt/rtl8723ds-bt.hash new file +2 -0

new file mode 100644
index 0000000000..1ec4e350f9
@@ -0,0 +1,2 @@
+# Locally computed
+sha256  9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4  rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz

package/rtl8723ds-bt/rtl8723ds-bt.mk new file +17 -0

new file mode 100644
index 0000000000..efd0a5bae9
@@ -0,0 +1,17 @@
+################################################################################
+#
+# rtl8723ds-bt
+#
+################################################################################
+
+RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08
+RTL8723DS_BT_SITE = $(call github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION))
+RTL8723DS_BT_LICENSE = PROPRIETARY
+
+define RTL8723DS_BT_INSTALL_TARGET_CMDS
+	mkdir -p $(TARGET_DIR)/lib/firmware/rtl_bt/
+	cp $(@D)/8723D/rtl8723d_fw $(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin
+	cp $(@D)/8723D/rtl8723d_config $(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin
+endef
+
+$(eval $(generic-package))

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Angelo Compagnucci

author

2022-12-13 23:22 UTC #1 lore raw

PATCH v4 2/3 configs/lichee_rv: new defconfig

Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
Board support is based on the nezha defconfig already available in buildroot.

https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html
https://linux-sunxi.org/Sipeed_Lichee_RV

Signed-off-by Angelo Compagnucci <[email protected]>

---
v4:
* bump to latest kernel/uboot/opensbi as for the nezha defconfig

 board/sipeed/lichee_rv/genimage.cfg           | 19 +++++++++++
 .../overlay/boot/extlinux/extlinux.conf       |  4 +++
 board/sipeed/lichee_rv/readme.txt             | 26 +++++++++++++++
 configs/sipeed_lichee_rv_defconfig            | 33 +++++++++++++++++++
 4 files changed, 82 insertions(+)
 create mode 100644 board/sipeed/lichee_rv/genimage.cfg
 create mode 100644 board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf
 create mode 100644 board/sipeed/lichee_rv/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_defconfig

board/sipeed/lichee_rv/genimage.cfg new file +19 -0

new file mode 100644
index 0000000000..d5df41203d
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		bootable = "true"
+		offset = 1M
+	}
+}

board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf new file +4 -0

new file mode 100644
index 0000000000..91b2298628
@@ -0,0 +1,4 @@
+label linux
+  kernel /boot/Image
+  # use devicetree from u-boot
+  append console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait

board/sipeed/lichee_rv/readme.txt new file +26 -0

new file mode 100644
index 0000000000..008be3a3bc
@@ -0,0 +1,26 @@
+Lichee RV
+===============
+
+Lichee RV - Nezha CM is a compute module with modular design, equipped
+with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
+It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin
+connectors to route all IO, making it convient for wide use and easy to replace.
+
+How to build
+============
+
+$ make lichee_rv_defconfig
+$ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.

configs/sipeed_lichee_rv_defconfig new file +33 -0

new file mode 100644
index 0000000000..f9782f870b
@@ -0,0 +1,33 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Indrek Kruusa

2022-12-14 20:14 UTC #2 lore raw

Re: [Buildroot] [PATCH v4 2/3] configs/lichee_rv: new defconfig

Kontakt Angelo Compagnucci (<[email protected]>) kirjutas kuupäeval K, 14. detsember 2022 kell 01:22:

Quoted 79 lines

https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html
https://linux-sunxi.org/Sipeed_Lichee_RV

Signed-off-by Angelo Compagnucci <[email protected]>

---
v4:
* bump to latest kernel/uboot/opensbi as for the nezha defconfig

 board/sipeed/lichee_rv/genimage.cfg           | 19 +++++++++++
 .../overlay/boot/extlinux/extlinux.conf       |  4 +++
 board/sipeed/lichee_rv/readme.txt             | 26 +++++++++++++++
 configs/sipeed_lichee_rv_defconfig            | 33 +++++++++++++++++++
 4 files changed, 82 insertions(+)
 create mode 100644 board/sipeed/lichee_rv/genimage.cfg
 create mode 100644
board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf
 create mode 100644 board/sipeed/lichee_rv/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_defconfig

board/sipeed/lichee_rv/genimage.cfg new file +19 -0

new file mode 100644
index 0000000000..d5df41203d
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV
+
+image sdcard.img {
+       hdimage {
+       }
+
+       partition u-boot {
+               in-partition-table = false
+               image = "u-boot-sunxi-with-spl.bin"
+               offset = 8K
+       }
+
+       partition rootfs {
+               partition-type = 0x83
+               image = "rootfs.ext4"
+               bootable = "true"
+               offset = 1M
+       }
+}

board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf new file +4 -0

new file mode 100644
index 0000000000..91b2298628
@@ -0,0 +1,4 @@
+label linux
+  kernel /boot/Image
+  # use devicetree from u-boot
+  append console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait

board/sipeed/lichee_rv/readme.txt new file +5 -0

new file mode 100644
index 0000000000..008be3a3bc
@@ -0,0 +1,26 @@
+Lichee RV
+===============
+
+Lichee RV - Nezha CM is a compute module with modular design, equipped
+with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3

RAM.

board/sipeed/lichee_rv/readme.txt new file +2 -0

+It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin
+connectors to route all IO, making it convient for wide use and easy to

replace.

board/sipeed/lichee_rv/readme.txt line 12

Quoted 5 lines

board/sipeed/lichee_rv/readme.txt new file +5 -0
+
+How to build
+============
+
+$ make lichee_rv_defconfig

This should be 'make sipeed_lichee_rv_defconfig'

Quoted 47 lines

+$ make

board/sipeed/lichee_rv/readme.txt new file +5 -0

+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called

"sdcard.img"

board/sipeed/lichee_rv/readme.txt new file +8 -0

+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.

configs/sipeed_lichee_rv_defconfig new file +8 -0

new file mode 100644
index 0000000000..f9782f870b
@@ -0,0 +1,33 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"

configs/sipeed_lichee_rv_defconfig new file +16 -0

+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call

Quoted 3 lines

github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"

In the future - when proper defconfig (supposedly 'lichee_rv') will be added to u-boot this should be changed accordingly. Currently the device tree is dock specific.

Quoted 9 lines

configs/sipeed_lichee_rv_defconfig new file +8 -1

+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
--

Quoted 3 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Angelo Compagnucci

author

2022-12-13 23:22 UTC #3 lore raw

PATCH v4 3/3 configs/lichee_rv_dock: new defconfig

In reply to Angelo Compagnucci

Lichee RV Dock is a RISC-V Linux development kits with high integration, small size and affordable price designed for opensource developer.

https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html

Signed-off-by Angelo Compagnucci <[email protected]>

---
v4:
* Bump to the latest kernel/uboot/opensbi as per nezha defconfig v3:
* Use kernel config fragment to enable RTL8723DS-BT driver
* Use mdev to let the system load device drivers modules at boot (rtl8723ds wifi and bluetooth)

 board/sipeed/lichee_rv_dock/genimage.cfg      | 19 ++++++++
 board/sipeed/lichee_rv_dock/linux.fragment    |  7 +++
 .../overlay/etc/network/interfaces            |  6 +++
 .../overlay/etc/wpa_supplicant.conf           |  8 ++++
 board/sipeed/lichee_rv_dock/readme.txt        | 45 +++++++++++++++++++
 configs/sipeed_lichee_rv_dock_defconfig       | 41 +++++++++++++++++
 6 files changed, 126 insertions(+)
 create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg
 create mode 100644 board/sipeed/lichee_rv_dock/linux.fragment
 create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces
 create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf
 create mode 100644 board/sipeed/lichee_rv_dock/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_dock_defconfig

board/sipeed/lichee_rv_dock/genimage.cfg new file +19 -0

new file mode 100644
index 0000000000..38078f0ae3
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV dock
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		bootable = "true"
+		offset = 1M
+	}
+}

board/sipeed/lichee_rv_dock/linux.fragment new file +7 -0

new file mode 100644
index 0000000000..10016889ab
@@ -0,0 +1,7 @@
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y

board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces new file +6 -0

new file mode 100644
index 0000000000..89e7d74aff
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf

board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf new file +8 -0

new file mode 100644
index 0000000000..b43292b0a7
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+        ssid="YOURSSID"
+        scan_ssid=1
+        key_mgmt=WPA-PSK
+        psk="YOURPASSWD"
+}

board/sipeed/lichee_rv_dock/readme.txt new file +45 -0

45 lines not on this page · raw message

configs/sipeed_lichee_rv_dock_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Indrek Kruusa

2022-12-14 20:19 UTC #4 lore raw

Re: [Buildroot] [PATCH v4 3/3] configs/lichee_rv_dock: new defconfig

Kontakt Angelo Compagnucci (<[email protected]>) kirjutas kuupäeval K, 14. detsember 2022 kell 01:22:

Quoted 117 lines

Lichee RV Dock is a RISC-V Linux development kits with high integration, small size and affordable price designed for opensource developer.
https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html
Signed-off-by Angelo Compagnucci <[email protected]>
---
v4:
* Bump to the latest kernel/uboot/opensbi as per nezha defconfig v3:
* Use kernel config fragment to enable RTL8723DS-BT driver
* Use mdev to let the system load device drivers modules at boot (rtl8723ds wifi and bluetooth)
 board/sipeed/lichee_rv_dock/genimage.cfg      | 19 ++++++++
 board/sipeed/lichee_rv_dock/linux.fragment    |  7 +++
 .../overlay/etc/network/interfaces            |  6 +++
 .../overlay/etc/wpa_supplicant.conf           |  8 ++++
 board/sipeed/lichee_rv_dock/readme.txt        | 45 +++++++++++++++++++
 configs/sipeed_lichee_rv_dock_defconfig       | 41 +++++++++++++++++
 6 files changed, 126 insertions(+)
 create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg
 create mode 100644 board/sipeed/lichee_rv_dock/linux.fragment
 create mode 100644
board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces
 create mode 100644
board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf
 create mode 100644 board/sipeed/lichee_rv_dock/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_dock_defconfig
board/sipeed/lichee_rv_dock/genimage.cfg new file +19 -0
new file mode 100644
index 0000000000..38078f0ae3
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV dock
+
+image sdcard.img {
+       hdimage {
+       }
+
+       partition u-boot {
+               in-partition-table = false
+               image = "u-boot-sunxi-with-spl.bin"
+               offset = 8K
+       }
+
+       partition rootfs {
+               partition-type = 0x83
+               image = "rootfs.ext4"
+               bootable = "true"
+               offset = 1M
+       }
+}
board/sipeed/lichee_rv_dock/linux.fragment new file +7 -0
new file mode 100644
index 0000000000..10016889ab
@@ -0,0 +1,7 @@
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces new file +6 -0
new file mode 100644
index 0000000000..89e7d74aff
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf
board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf new file +8 -0
new file mode 100644
index 0000000000..b43292b0a7
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+        ssid="YOURSSID"
+        scan_ssid=1
+        key_mgmt=WPA-PSK
+        psk="YOURPASSWD"
+}
board/sipeed/lichee_rv_dock/readme.txt new file +4 -0
new file mode 100644
index 0000000000..34478cafcc
@@ -0,0 +1,45 @@
+Lichee RV dock
+===============
+
+Lichee RV Dock is a RISC-V Linux development kits with high integration,
small
+size and affordable price designed for opensource developer. It's equipped with
+HDMI interface and it supports many screen by its screen convert board. It's
+also equipped with many peripherals, including a UAB-A port, 2.4G Wifi-BT module,

board/sipeed/lichee_rv_dock/readme.txt line 13

Quoted 6 lines

board/sipeed/lichee_rv_dock/readme.txt new file +6 -0

+an analog microphone and a speaker jack interface.
+
+How to build
+============
+
+$ make lichee_rv_dock_defconfig

-> make sipeed_lichee_rv_dock_defconfig

board/sipeed/lichee_rv_dock/readme.txt line 19

Quoted 7 lines

+$ make
board/sipeed/lichee_rv_dock/readme.txt new file +5 -0
+
+Wifi
+==========
+
+Edit board/lichee_rv/overlay_dock/etc/wpa_supplicant.conf or

Path is incorrect

Quoted 80 lines

board/sipeed/lichee_rv_dock/readme.txt new file +18 -0

+/etc/wpa_supplicant.conf once connected to the board:
+
+* Replace YOURSSID with your AP ssid
+* Replace YOURPASSWD with your AP password
+
+Bluetooth
+==========
+
+To make the device discoverable and pairable, once connected to the board:
+
+* bluetoothctl power on
+* bluetoothctl discoverable yes
+* bluetoothctl pairable yes
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called

"sdcard.img"

board/sipeed/lichee_rv_dock/readme.txt new file +8 -0

+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.

configs/sipeed_lichee_rv_dock_defconfig new file +4 -0

new file mode 100644
index 0000000000..7c8c6788fa
@@ -0,0 +1,41 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay

board/sipeed/lichee_rv_dock/overlay"

configs/sipeed_lichee_rv_dock_defconfig new file +5 -0

+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv_dock/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"

configs/sipeed_lichee_rv_dock_defconfig new file +23 -0

+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv-dock"
 
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sipeed/lichee_rv_dock/linux.fragment"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_PACKAGE_RTL8723DS=y
+BR2_PACKAGE_RTL8723DS_BT=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"

configs/sipeed_lichee_rv_dock_defconfig new file +9 -1

+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
--

Quoted 3 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot