Skip to contentSkip to conversation

package/rtl8723ds-bt: new package

PATCH Superseded Angelo Compagnucci 2 participants 6 messages Dec 14, 2022 – Dec 15, 2022

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Angelo Compagnucci

author
#0 lore raw

PATCH v5 1/3 package/rtl8723ds-bt: new package

This package install the required firmware for enabling the Bluetooth device embedded in the RTL8723DS chip. The driver is included in Linux main tree and can be enabled with the BT_HCIUART_RTL symbol.

Signed-off-by Angelo Compagnucci <[email protected]>

---
v3:
* Simplified package (Thomas, Yann)
* Package now only installs firmware (Thomas, Yann)

 package/Config.in                      |  1 +
 package/rtl8723ds-bt/Config.in         |  6 ++++++
 package/rtl8723ds-bt/rtl8723ds-bt.hash |  2 ++
 package/rtl8723ds-bt/rtl8723ds-bt.mk   | 17 +++++++++++++++++
 4 files changed, 26 insertions(+)
 create mode 100644 package/rtl8723ds-bt/Config.in
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk
package/Config.in +1 -0
index 914c3584e9..999feae08a 100644
@@ -585,6 +585,7 @@ endmenu
 	source "package/rtl8192eu/Config.in"
 	source "package/rtl8723bu/Config.in"
 	source "package/rtl8723ds/Config.in"
+	source "package/rtl8723ds-bt/Config.in"
 	source "package/rtl8812au-aircrack-ng/Config.in"
 	source "package/rtl8821au/Config.in"
 	source "package/sane-backends/Config.in"
package/rtl8723ds-bt/Config.in new file +6 -0
new file mode 100644
index 0000000000..0a604310c0
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_RTL8723DS_BT
+	bool "rtl8723ds-bt"
+	help
+	  rtl8723ds UART attached Bluetooth module firmware.
+
+	  https://github.com/wsyco/RTL8723DS_BT_Linux
package/rtl8723ds-bt/rtl8723ds-bt.hash new file +2 -0
new file mode 100644
index 0000000000..1ec4e350f9
@@ -0,0 +1,2 @@
+# Locally computed
+sha256  9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4  rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz
package/rtl8723ds-bt/rtl8723ds-bt.mk new file +17 -0
new file mode 100644
index 0000000000..efd0a5bae9
@@ -0,0 +1,17 @@
+################################################################################
+#
+# rtl8723ds-bt
+#
+################################################################################
+
+RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08
+RTL8723DS_BT_SITE = $(call github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION))
+RTL8723DS_BT_LICENSE = PROPRIETARY
+
+define RTL8723DS_BT_INSTALL_TARGET_CMDS
+	mkdir -p $(TARGET_DIR)/lib/firmware/rtl_bt/
+	cp $(@D)/8723D/rtl8723d_fw $(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin
+	cp $(@D)/8723D/rtl8723d_config $(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin
+endef
+
+$(eval $(generic-package))
Signature · 6 lines
2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#1 lore raw

PATCH v5 2/3 configs/lichee_rv: new defconfig

Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
Board support is based on the nezha defconfig already available in buildroot.

https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html
https://linux-sunxi.org/Sipeed_Lichee_RV

Signed-off-by Angelo Compagnucci <[email protected]>

---
v5:
* Fixing typos in readme (Indrek Kruusa)
v4:
* bump to latest kernel/uboot/opensbi as for the nezha defconfig

 board/sipeed/lichee_rv/genimage.cfg           | 19 +++++++++++
 .../overlay/boot/extlinux/extlinux.conf       |  4 +++
 board/sipeed/lichee_rv/readme.txt             | 26 +++++++++++++++
 configs/sipeed_lichee_rv_defconfig            | 33 +++++++++++++++++++
 4 files changed, 82 insertions(+)
 create mode 100644 board/sipeed/lichee_rv/genimage.cfg
 create mode 100644 board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf
 create mode 100644 board/sipeed/lichee_rv/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_defconfig
board/sipeed/lichee_rv/genimage.cfg new file +19 -0
new file mode 100644
index 0000000000..d5df41203d
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		bootable = "true"
+		offset = 1M
+	}
+}
board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..91b2298628
@@ -0,0 +1,4 @@
+label linux
+  kernel /boot/Image
+  # use devicetree from u-boot
+  append console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait
board/sipeed/lichee_rv/readme.txt new file +26 -0
new file mode 100644
index 0000000000..24e8141851
@@ -0,0 +1,26 @@
+Lichee RV
+===============
+
+Lichee RV - Nezha CM is a compute module with modular design, equipped
+with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
+It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin
+connectors to route all IO, making it convient for wide use and easy to replace.
+
+How to build
+============
+
+$ make sipeed_lichee_rv_defconfig
+$ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.
configs/sipeed_lichee_rv_defconfig new file +33 -0
new file mode 100644
index 0000000000..f9782f870b
@@ -0,0 +1,33 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 6 lines
2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Reviewed-by Tested-by on v5 2/3
#2 lore raw

Re: [Buildroot] [PATCH v5 2/3] configs/lichee_rv: new defconfig

Kontakt Angelo Compagnucci (<[email protected]>) kirjutas kuupäeval N, 15. detsember 2022 kell 00:15:

Quoted 11 lines

Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
Board support is based on the nezha defconfig already available in buildroot.

https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html
https://linux-sunxi.org/Sipeed_Lichee_RV

Signed-off-by Angelo Compagnucci <[email protected]>
Reviewed-by Indrek Kruusa <[email protected]>

I also did a clean build for 'sipeed_lichee_rv_defconfig' and booted the image on the Lichee RV dock without issues. Therefore:

Tested-by Indrek Kruusa <[email protected]>
Quoted 133 lines

---
v5:
* Fixing typos in readme (Indrek Kruusa)
v4:
* bump to latest kernel/uboot/opensbi as for the nezha defconfig

 board/sipeed/lichee_rv/genimage.cfg           | 19 +++++++++++
 .../overlay/boot/extlinux/extlinux.conf       |  4 +++
 board/sipeed/lichee_rv/readme.txt             | 26 +++++++++++++++
 configs/sipeed_lichee_rv_defconfig            | 33 +++++++++++++++++++
 4 files changed, 82 insertions(+)
 create mode 100644 board/sipeed/lichee_rv/genimage.cfg
 create mode 100644
board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf
 create mode 100644 board/sipeed/lichee_rv/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_defconfig
board/sipeed/lichee_rv/genimage.cfg new file +19 -0
new file mode 100644
index 0000000000..d5df41203d
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV
+
+image sdcard.img {
+       hdimage {
+       }
+
+       partition u-boot {
+               in-partition-table = false
+               image = "u-boot-sunxi-with-spl.bin"
+               offset = 8K
+       }
+
+       partition rootfs {
+               partition-type = 0x83
+               image = "rootfs.ext4"
+               bootable = "true"
+               offset = 1M
+       }
+}
board/sipeed/lichee_rv/overlay/boot/extlinux/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..91b2298628
@@ -0,0 +1,4 @@
+label linux
+  kernel /boot/Image
+  # use devicetree from u-boot
+  append console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait
board/sipeed/lichee_rv/readme.txt new file +5 -0
new file mode 100644
index 0000000000..24e8141851
@@ -0,0 +1,26 @@
+Lichee RV
+===============
+
+Lichee RV - Nezha CM is a compute module with modular design, equipped
+with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3

RAM.

board/sipeed/lichee_rv/readme.txt new file +2 -0
+It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin
+connectors to route all IO, making it convient for wide use and easy to

replace.

board/sipeed/lichee_rv/readme.txt new file +11 -0
+
+How to build
+============
+
+$ make sipeed_lichee_rv_defconfig
+$ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called

"sdcard.img"

board/sipeed/lichee_rv/readme.txt new file +8 -0
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.
configs/sipeed_lichee_rv_defconfig new file +8 -0
new file mode 100644
index 0000000000..f9782f870b
@@ -0,0 +1,33 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"

configs/sipeed_lichee_rv_defconfig new file +16 -0
+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"

configs/sipeed_lichee_rv_defconfig new file +9 -1
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
--
Quoted 3 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

author
#3 lore raw

PATCH v5 3/3 configs/lichee_rv_dock: new defconfig

In reply to Angelo Compagnucci

Lichee RV Dock is a RISC-V Linux development kits with high integration, small size and affordable price designed for opensource developer.

https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html

Signed-off-by Angelo Compagnucci <[email protected]>

---
v5:
* Fixing typos in readme (Indrek Kruusa)
v4:
* Bump to the latest kernel/uboot/opensbi as per nezha defconfig v3:
* Use kernel config fragment to enable RTL8723DS-BT driver
* Use mdev to let the system load device drivers modules at boot (rtl8723ds wifi and bluetooth)

 board/sipeed/lichee_rv_dock/genimage.cfg      | 19 ++++++++
 board/sipeed/lichee_rv_dock/linux.fragment    |  7 +++
 .../overlay/etc/network/interfaces            |  6 +++
 .../overlay/etc/wpa_supplicant.conf           |  8 ++++
 board/sipeed/lichee_rv_dock/readme.txt        | 45 +++++++++++++++++++
 configs/sipeed_lichee_rv_dock_defconfig       | 41 +++++++++++++++++
 6 files changed, 126 insertions(+)
 create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg
 create mode 100644 board/sipeed/lichee_rv_dock/linux.fragment
 create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces
 create mode 100644 board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf
 create mode 100644 board/sipeed/lichee_rv_dock/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_dock_defconfig
board/sipeed/lichee_rv_dock/genimage.cfg new file +19 -0
new file mode 100644
index 0000000000..38078f0ae3
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV dock
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		bootable = "true"
+		offset = 1M
+	}
+}
board/sipeed/lichee_rv_dock/linux.fragment new file +7 -0
new file mode 100644
index 0000000000..10016889ab
@@ -0,0 +1,7 @@
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces new file +6 -0
new file mode 100644
index 0000000000..89e7d74aff
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf
board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf new file +8 -0
new file mode 100644
index 0000000000..b43292b0a7
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+        ssid="YOURSSID"
+        scan_ssid=1
+        key_mgmt=WPA-PSK
+        psk="YOURPASSWD"
+}
board/sipeed/lichee_rv_dock/readme.txt new file +45 -0

45 lines not on this page · raw message

configs/sipeed_lichee_rv_dock_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 6 lines
2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Tested-by on v5 3/3
#4 lore raw

Re: [Buildroot] [PATCH v5 3/3] configs/lichee_rv_dock: new defconfig

Kontakt Angelo Compagnucci (<[email protected]>) kirjutas kuupäeval N, 15. detsember 2022 kell 00:15:

Quoted 121 lines

Lichee RV Dock is a RISC-V Linux development kits with high integration, small size and affordable price designed for opensource developer.

https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html

Signed-off-by Angelo Compagnucci <[email protected]>

---
v5:
* Fixing typos in readme (Indrek Kruusa)
v4:
* Bump to the latest kernel/uboot/opensbi as per nezha defconfig v3:
* Use kernel config fragment to enable RTL8723DS-BT driver
* Use mdev to let the system load device drivers modules at boot (rtl8723ds wifi and bluetooth)

 board/sipeed/lichee_rv_dock/genimage.cfg      | 19 ++++++++
 board/sipeed/lichee_rv_dock/linux.fragment    |  7 +++
 .../overlay/etc/network/interfaces            |  6 +++
 .../overlay/etc/wpa_supplicant.conf           |  8 ++++
 board/sipeed/lichee_rv_dock/readme.txt        | 45 +++++++++++++++++++
 configs/sipeed_lichee_rv_dock_defconfig       | 41 +++++++++++++++++
 6 files changed, 126 insertions(+)
 create mode 100644 board/sipeed/lichee_rv_dock/genimage.cfg
 create mode 100644 board/sipeed/lichee_rv_dock/linux.fragment
 create mode 100644
board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces
 create mode 100644
board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf
 create mode 100644 board/sipeed/lichee_rv_dock/readme.txt
 create mode 100644 configs/sipeed_lichee_rv_dock_defconfig
board/sipeed/lichee_rv_dock/genimage.cfg new file +19 -0
new file mode 100644
index 0000000000..38078f0ae3
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV dock
+
+image sdcard.img {
+       hdimage {
+       }
+
+       partition u-boot {
+               in-partition-table = false
+               image = "u-boot-sunxi-with-spl.bin"
+               offset = 8K
+       }
+
+       partition rootfs {
+               partition-type = 0x83
+               image = "rootfs.ext4"
+               bootable = "true"
+               offset = 1M
+       }
+}
board/sipeed/lichee_rv_dock/linux.fragment new file +7 -0
new file mode 100644
index 0000000000..10016889ab
@@ -0,0 +1,7 @@
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
board/sipeed/lichee_rv_dock/overlay/etc/network/interfaces new file +6 -0
new file mode 100644
index 0000000000..89e7d74aff
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf
board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf new file +8 -0
new file mode 100644
index 0000000000..b43292b0a7
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+        ssid="YOURSSID"
+        scan_ssid=1
+        key_mgmt=WPA-PSK
+        psk="YOURPASSWD"
+}
board/sipeed/lichee_rv_dock/readme.txt new file +4 -0
new file mode 100644
index 0000000000..05e1e8d43b
@@ -0,0 +1,45 @@
+Lichee RV dock
+===============
+
+Lichee RV Dock is a RISC-V Linux development kits with high integration,

small
+size and affordable price designed for opensource developer. It's equipped with
+HDMI interface and it supports many screen by its screen convert board. It's
+also equipped with many peripherals, including a UAB-A port, 2.4G Wifi-BT module,

board/sipeed/lichee_rv_dock/readme.txt new file +2 -0
+an analog microphone and a speaker jack interface.
+

board/sipeed/lichee_rv_dock/readme.txt line 19

Quoted 10 lines
board/sipeed/lichee_rv_dock/readme.txt new file +10 -0
+How to build
+============
+
+$ make sipeed_lichee_rv_dock_defconfig
+$ make
+
+Wifi
+==========
+
+Edit board/sipeed/lichee_rv/overlay_dock/etc/wpa_supplicant.conf or

No, this mistake in the path is not fixed.

But I did a clean build for 'sipeed_lichee_rv_dock_defconfig' and booted it on the Lichee RV dock without issues. So you can add:

Tested-by Indrek Kruusa <[email protected]>
Quoted 80 lines
board/sipeed/lichee_rv_dock/readme.txt new file +18 -0
+/etc/wpa_supplicant.conf once connected to the board:
+
+* Replace YOURSSID with your AP ssid
+* Replace YOURPASSWD with your AP password
+
+Bluetooth
+==========
+
+To make the device discoverable and pairable, once connected to the board:
+
+* bluetoothctl power on
+* bluetoothctl discoverable yes
+* bluetoothctl pairable yes
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called

"sdcard.img"

board/sipeed/lichee_rv_dock/readme.txt new file +8 -0
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.
configs/sipeed_lichee_rv_dock_defconfig new file +4 -0
new file mode 100644
index 0000000000..7c8c6788fa
@@ -0,0 +1,41 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay

board/sipeed/lichee_rv_dock/overlay"

configs/sipeed_lichee_rv_dock_defconfig new file +5 -0
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv_dock/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"

configs/sipeed_lichee_rv_dock_defconfig new file +23 -0
+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv-dock"
 
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sipeed/lichee_rv_dock/linux.fragment"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_PACKAGE_RTL8723DS=y
+BR2_PACKAGE_RTL8723DS_BT=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call

github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"

configs/sipeed_lichee_rv_dock_defconfig new file +9 -1
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
--
Quoted 3 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Tested-by on v5 1/3
#5 lore raw
In reply to Angelo Compagnucci

Kontakt Angelo Compagnucci (<[email protected]>) kirjutas kuupäeval N, 15. detsember 2022 kell 00:15:

Quoted 7 lines

This package install the required firmware for enabling the Bluetooth device embedded in the RTL8723DS chip. The driver is included in Linux main tree and can be enabled with the BT_HCIUART_RTL symbol.

Signed-off-by Angelo Compagnucci <[email protected]>

I did the clean build + boot testing with Lichee RV dock (sipeed_lichee_rv_dock_defconfig) which is using this package. From the log:

Starting mdev... OK

[    7.044734] Bluetooth: HCI UART driver ver 2.3
[    7.050998] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    7.805105] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d
lmp_ver=08 lmp_subver=8723
[    7.817938] Bluetooth: hci0: RTL: rom_version status=0 version=2
[    7.824105] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723ds_fw.bin
[    8.073287] 8723ds: loading out-of-tree module taints kernel.
[    8.085577] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723ds_config.bin
[    8.117338] Bluetooth: hci0: RTL: cfg_sz 47, total sz 30775
[    8.637554] Bluetooth: hci0: RTL: fw version 0xaa6c133b

Initializing random number generator: OK
Saving random seed: OK
Starting system message bus: done

If that counts as a test from patch perspective then:

Tested-by Indrek Kruusa <[email protected]>
Quoted 79 lines

---
v3:
* Simplified package (Thomas, Yann)
* Package now only installs firmware (Thomas, Yann)

 package/Config.in                      |  1 +
 package/rtl8723ds-bt/Config.in         |  6 ++++++
 package/rtl8723ds-bt/rtl8723ds-bt.hash |  2 ++
 package/rtl8723ds-bt/rtl8723ds-bt.mk   | 17 +++++++++++++++++
 4 files changed, 26 insertions(+)
 create mode 100644 package/rtl8723ds-bt/Config.in
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.hash
 create mode 100644 package/rtl8723ds-bt/rtl8723ds-bt.mk
package/Config.in +1 -0
index 914c3584e9..999feae08a 100644
@@ -585,6 +585,7 @@ endmenu
        source "package/rtl8192eu/Config.in"
        source "package/rtl8723bu/Config.in"
        source "package/rtl8723ds/Config.in"
+       source "package/rtl8723ds-bt/Config.in"
        source "package/rtl8812au-aircrack-ng/Config.in"
        source "package/rtl8821au/Config.in"
        source "package/sane-backends/Config.in"
package/rtl8723ds-bt/Config.in new file +6 -0
new file mode 100644
index 0000000000..0a604310c0
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_RTL8723DS_BT
+       bool "rtl8723ds-bt"
+       help
+         rtl8723ds UART attached Bluetooth module firmware.
+
+         https://github.com/wsyco/RTL8723DS_BT_Linux
package/rtl8723ds-bt/rtl8723ds-bt.hash new file +2 -0
new file mode 100644
index 0000000000..1ec4e350f9
@@ -0,0 +1,2 @@
+# Locally computed
+sha256  9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4

rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz

package/rtl8723ds-bt/ renamed from package/rtl8723ds-bt/rtl8723ds-bt.mk +0 -0

rtl8723ds-bt.mk
new file mode 100644
index 0000000000..efd0a5bae9

package/rtl8723ds-bt/rtl8723ds-bt.mk new file +8 -0
@@ -0,0 +1,17 @@
 
+################################################################################
+#
+# rtl8723ds-bt
+#
 
+################################################################################
+
+RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08
+RTL8723DS_BT_SITE = $(call

github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION))

package/rtl8723ds-bt/rtl8723ds-bt.mk new file +5 -0
+RTL8723DS_BT_LICENSE = PROPRIETARY
+
+define RTL8723DS_BT_INSTALL_TARGET_CMDS
+       mkdir -p $(TARGET_DIR)/lib/firmware/rtl_bt/
+       cp $(@D)/8723D/rtl8723d_fw

$(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin
+ cp $(@D)/8723D/rtl8723d_config
$(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin

package/rtl8723ds-bt/rtl8723ds-bt.mk new file +3 -1
+endef
+
+$(eval $(generic-package))
--
Quoted 3 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot