configs/imxrt1050-evk: New defconfig
PATCH v5 1/1 configs/imxrt1050-evk: New defconfig
Add defconfig for imxrt1050-evk is a development board from NXP.
Giulio and I worked on Linux and U-boot for this board. And now I'm adding support for the new board in Buildroot.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have buildroot ported to them it seems reasonable to add support for them.
--- DEVELOPERS | 6 ++++ board/freescale/imxrt1050evk/genimage.cfg | 40 +++++++++++++++++++++ board/freescale/imxrt1050evk/readme.txt | 30 ++++++++++++++++ board/freescale/imxrt1050evk/uboot.fragment | 2 ++ configs/imxrt1050-evk_defconfig | 40 +++++++++++++++++++++ 5 files changed, 118 insertions(+) create mode 100644 board/freescale/imxrt1050evk/genimage.cfg create mode 100644 board/freescale/imxrt1050evk/readme.txt create mode 100644 board/freescale/imxrt1050evk/uboot.fragment create mode 100644 configs/imxrt1050-evk_defconfig
DEVELOPERS +6 -0
@@ -1132,9 +1132,11 @@ F: package/webp/ F: package/xapian/ N: Giulio Benetti <[email protected]> +F: board/freescale/imxrt1050evk/* F: board/olimex/a* F: configs/amarula_vyasa_rk3288_defconfig F: configs/asus_tinker_rk3288_defconfig +F: configs/imxrt1050-evk_defconfig F: configs/olimex_a* F: package/at/ F: package/binutils/
@@ -1477,6 +1479,10 @@ F: package/wmctrl/ F: package/x11r7/xdriver_xf86-video-imx/ F: package/x11r7/xdriver_xf86-video-imx-viv/ +N: Jesse Taube <[email protected]> +F: board/freescale/imxrt1050evk/* +F: configs/imxrt1050-evk_defconfig + N: Jesse Van Gavere <[email protected]> F: package/qt6/qt6serialport/
board/freescale/imxrt1050evk/genimage.cfg new file +40 -0
@@ -0,0 +1,40 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imxrt1050-evk.dtb", + } + } + + size = 8M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1K + size = 127K + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.img" + offset = 128K + size = 512K + } + + partition boot { + partition-type = 0xc + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/freescale/imxrt1050evk/readme.txt new file +30 -0
@@ -0,0 +1,30 @@ +NXP i.MXRT1050 EVK board +------------------------ + +i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high +level of integration of an applications processors with the ease-of-use and +real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm +Cortex-M7 core at 600 MHz. +https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK + +To build a minimal support for this board: + +$ make imxrt1050-evk_defconfig +$ make + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be flashed into the SD card: + +$ dd if=output/images/sdcard.img of=/dev/sdX +Where 'sdX' is the device node of the uSD. + +Jumper settings: + + SW7: 1 0 1 0 + +Where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +Connect the USB cable between the EVK and the PC for the console. + +Insert the micro SD card in the board, power it up and U-Boot messages should come up.
board/freescale/imxrt1050evk/uboot.fragment new file +2 -0
@@ -0,0 +1,2 @@ +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000"
configs/imxrt1050-evk_defconfig new file +40 -0
@@ -0,0 +1,40 @@ +# Architecture +BR2_arm=y +BR2_cortex_m7=y + +# Image +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imxrt1050evk/genimage.cfg" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1" +BR2_LINUX_KERNEL_DEFCONFIG="imxrt" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imxrt1050-evk" + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="16M" + +# NOMMU Busybox +BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imxrt1050-evk" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imxrt1050evk/uboot.fragment" +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="SPL" +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y + +# Required tools to create the SD card image +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MKPASSWD=y
Signature · 6 lines
2.39.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Jesse,
Quoted 14 lines · Jesse Taube
Add defconfig for imxrt1050-evk is a development board from NXP.
Giulio and I worked on Linux and U-boot for this board. And now I'm adding support for the new board in Buildroot.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have buildroot ported to them it seems reasonable to add support for them.
Quoted 4 lines
Signed-off-by Jesse Taube <[email protected]>Cc Giulio Benetti <[email protected]>
Here you've missed the changelog.
Also please set the V4 patch as superseded in Patchwork.
Quoted 135 lines
--- DEVELOPERS | 6 ++++ board/freescale/imxrt1050evk/genimage.cfg | 40 +++++++++++++++++++++ board/freescale/imxrt1050evk/readme.txt | 30 ++++++++++++++++ board/freescale/imxrt1050evk/uboot.fragment | 2 ++ configs/imxrt1050-evk_defconfig | 40 +++++++++++++++++++++ 5 files changed, 118 insertions(+)create mode 100644 board/freescale/imxrt1050evk/genimage.cfg create mode 100644
board/freescale/imxrt1050evk/readme.txtcreate mode 100644 board/freescale/imxrt1050evk/uboot.fragment create mode 100644 configs/imxrt1050-evk_defconfigDEVELOPERS +6
-0@@ -1132,9 +1132,11 @@ F: package/webp/ F: package/xapian/ N: Giulio Benetti <[email protected]> +F: board/freescale/imxrt1050evk/* F: board/olimex/a* F: configs/amarula_vyasa_rk3288_defconfig F: configs/asus_tinker_rk3288_defconfig +F: configs/imxrt1050-evk_defconfig F: configs/olimex_a* F: package/at/ F: package/binutils/@@ -1477,6 +1479,10 @@ F: package/wmctrl/ F: package/x11r7/xdriver_xf86-video-imx/ F: package/x11r7/xdriver_xf86-video-imx-viv/ +N: Jesse Taube <[email protected]> +F: board/freescale/imxrt1050evk/* +F: configs/imxrt1050-evk_defconfig + N: Jesse Van Gavere <[email protected]> F: package/qt6/qt6serialport/board/freescale/imxrt1050evk/genimage.cfg new file +40
-0@@ -0,0 +1,40 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imxrt1050-evk.dtb", + } + } + + size = 8M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1K + size = 127K + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.img" + offset = 128K + size = 512K + } + + partition boot { + partition-type = 0xc + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}board/freescale/imxrt1050evk/readme.txt new file +30
-0@@ -0,0 +1,30 @@ +NXP i.MXRT1050 EVK board +------------------------ + +i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high +level of integration of an applications processors with the ease-of-use and +real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm +Cortex-M7 core at 600 MHz. +https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK + +To build a minimal support for this board: + +$ make imxrt1050-evk_defconfig +$ make + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be flashed into the SD card: + +$ dd if=output/images/sdcard.img of=/dev/sdX +Where 'sdX' is the device node of the uSD. + +Jumper settings: + + SW7: 1 0 1 0 + +Where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +Connect the USB cable between the EVK and the PC for the console. + +Insert the micro SD card in the board, power it up and U-Boot messages should come up.board/freescale/imxrt1050evk/uboot.fragment new file +2
-0@@ -0,0 +1,2 @@ +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000"configs/imxrt1050-evk_defconfig new file +0
-0
configs/imxrt1050-evk_defconfig line 3
Quoted 3 lines
configs/imxrt1050-evk_defconfig new file +3
-0@@ -0,0 +1,40 @@ +# Architecture +BR2_arm=y +BR2_cortex_m7=y
Here you must specify:
# Toolchain
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
otherwise the latest Linux Headers will be picked, and once version 6.2 will come out the headers will be unaligned with the Linux version.
Quoted 27 lines
configs/imxrt1050-evk_defconfig new file +27
-0+ +# Image +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imxrt1050evk/genimage.cfg" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1" +BR2_LINUX_KERNEL_DEFCONFIG="imxrt" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imxrt1050-evk" + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="16M" + +# NOMMU Busybox +BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10"
configs/imxrt1050-evk_defconfig line 40
Quoted 10 lines
configs/imxrt1050-evk_defconfig new file +10
-0+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imxrt1050-evk" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imxrt1050evk/uboot.fragment" +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="SPL" +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y + +# Required tools to create the SD card image +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MKPASSWD=y
Have you tried to build the imxrt1050-evk_defconfig using buildroot/utils/docker-run ?
Using that I've found you also need to add:
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_MTOOLS=y
I've retested on the board and it works good except the points above. So with those 3 options enabled you can add:
I wait for V6.
Remember to set as superseded this V5 patch too once you've sent the V6.
Thank you!
Kind regards
Signature · 6 lines
Giulio Benetti CEO/CTO@Benetti Engineering sas _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot