Skip to contentSkip to conversation

cmd: mmc: Expand bkops handling

PATCH In review Marek Vasut 3 participants 3 messages Jan 5, 2023 – Jan 31, 2023 MMC, SD and SDIO

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 cmd: mmc: Expand bkops handling

Add more capable "bkops" command which allows enabling and disabling both manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is poorly named to cover all the possibilities, hence the new-ish subcommand. Note that both commands are wrappers around the same common code.

---
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
---
V2: - Add kerneldoc comment to mmc_set_bkops_enable
- Drop ifdef around mmc_set_bkops_enable in mmc.h

---
 cmd/mmc.c         | 49 +++++++++++++++++++++++++++++++++++++++--------
 drivers/mmc/mmc.c | 14 +++++++++-----
 include/mmc.h     | 14 +++++++++++---
 3 files changed, 61 insertions(+), 16 deletions(-)
cmd/mmc.c +41 -8
index c79d9407986..94deb9a1686 100644
@@ -1020,16 +1020,12 @@ static int do_mmc_setdsr(struct cmd_tbl *cmdtp, int flag,
 }
 
 #ifdef CONFIG_CMD_BKOPS_ENABLE
-static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
-			       int argc, char *const argv[])
+static int mmc_bkops_common(char *device, bool autobkops, bool enable)
 {
-	int dev;
 	struct mmc *mmc;
+	int dev;
 
-	if (argc != 2)
-		return CMD_RET_USAGE;
-
-	dev = dectoul(argv[1], NULL);
+	dev = dectoul(device, NULL);
 
 	mmc = init_mmc_device(dev, false);
 	if (!mmc)
@@ -1040,7 +1036,41 @@ static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
 		return CMD_RET_FAILURE;
 	}
 
-	return mmc_set_bkops_enable(mmc);
+	return mmc_set_bkops_enable(mmc, autobkops, enable);
+}
+
+static int do_mmc_bkops(struct cmd_tbl *cmdtp, int flag,
+			int argc, char * const argv[])
+{
+	bool autobkops, enable;
+
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	if (!strcmp(argv[2], "manual"))
+		autobkops = false;
+	else if (!strcmp(argv[2], "auto"))
+		autobkops = true;
+	else
+		return CMD_RET_FAILURE;
+
+	if (!strcmp(argv[3], "disable"))
+		enable = false;
+	else if (!strcmp(argv[3], "enable"))
+		enable = true;
+	else
+		return CMD_RET_FAILURE;
+
+	return mmc_bkops_common(argv[1], autobkops, enable);
+}
+
+static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
+			       int argc, char * const argv[])
+{
+	if (argc != 2)
+		return CMD_RET_USAGE;
+
+	return mmc_bkops_common(argv[1], false, true);
 }
 #endif
 
@@ -1102,6 +1132,7 @@ static struct cmd_tbl cmd_mmc[] = {
 	U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),
 #ifdef CONFIG_CMD_BKOPS_ENABLE
 	U_BOOT_CMD_MKENT(bkops-enable, 2, 0, do_mmc_bkops_enable, "", ""),
+	U_BOOT_CMD_MKENT(bkops, 4, 0, do_mmc_bkops, "", ""),
 #endif
 };
 
@@ -1188,6 +1219,8 @@ U_BOOT_CMD(
 #ifdef CONFIG_CMD_BKOPS_ENABLE
 	"mmc bkops-enable <dev> - enable background operations handshake on device\n"
 	"   WARNING: This is a write-once setting.\n"
+	"mmc bkops <dev> [auto|manual] [enable|disable]\n"
+	" - configure background operations handshake on device\n"
 #endif
 	);
 
drivers/mmc/mmc.c +9 -5
index 210703ea46b..afbc497b12c 100644
@@ -3127,9 +3127,10 @@ int mmc_init_device(int num)
 #endif
 
 #ifdef CONFIG_CMD_BKOPS_ENABLE
-int mmc_set_bkops_enable(struct mmc *mmc)
+int mmc_set_bkops_enable(struct mmc *mmc, bool autobkops, bool enable)
 {
 	int err;
+	u32 bit = autobkops ? BIT(1) : BIT(0);
 	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
 
 	err = mmc_send_ext_csd(mmc, ext_csd);
@@ -3143,18 +3144,21 @@ int mmc_set_bkops_enable(struct mmc *mmc)
 		return -EMEDIUMTYPE;
 	}
 
-	if (ext_csd[EXT_CSD_BKOPS_EN] & 0x1) {
+	if (enable && (ext_csd[EXT_CSD_BKOPS_EN] & bit)) {
 		puts("Background operations already enabled\n");
 		return 0;
 	}
 
-	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN, 1);
+	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN,
+			 enable ? bit : 0);
 	if (err) {
-		puts("Failed to enable manual background operations\n");
+		printf("Failed to %sable manual background operations\n",
+		       enable ? "en" : "dis");
 		return err;
 	}
 
-	puts("Enabled manual background operations\n");
+	printf("%sabled %s background operations\n",
+	       enable ? "En" : "Dis", autobkops ? "auto" : "manual");
 
 	return 0;
 }
include/mmc.h +11 -3
index 571fa625d02..36dd841d5d1 100644
@@ -892,9 +892,17 @@ int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
 int mmc_rpmb_route_frames(struct mmc *mmc, void *req, unsigned long reqlen,
 			  void *rsp, unsigned long rsplen);
 
-#ifdef CONFIG_CMD_BKOPS_ENABLE
-int mmc_set_bkops_enable(struct mmc *mmc);
-#endif
+/**
+ * mmc_set_bkops_enable() - enable background operations
+ * @param mmc		Pointer to a MMC device struct
+ * @param autobkops	Enable automatic bkops, not manual bkops
+ * @param enable	Enable bkops, not disable
+ *
+ * Enable or disable automatic or manual background operation of the eMMC.
+ *
+ * Return: 0 on success, <0 on error.
+ */
+int mmc_set_bkops_enable(struct mmc *mmc, bool autobkops, bool enable);
 
 /**
  * Start device initialization and return immediately; it does not block on
Signature · 1 line
2.39.0
Reviewed-by on v2 1/1
#1 lore raw
Quoted 13 lines · Marek Vasut

Add more capable "bkops" command which allows enabling and disabling both manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is poorly named to cover all the possibilities, hence the new-ish subcommand. Note that both commands are wrappers around the same common code.

---
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
---
V2: - Add kerneldoc comment to mmc_set_bkops_enable
- Drop ifdef around mmc_set_bkops_enable in mmc.h

Quoted 5 lines
---
 cmd/mmc.c         | 49 +++++++++++++++++++++++++++++++++++++++--------
 drivers/mmc/mmc.c | 14 +++++++++-----
 include/mmc.h     | 14 +++++++++++---
 3 files changed, 61 insertions(+), 16 deletions(-)
Reviewed-by on v2 1/1
#2 lore raw
In reply to Marek Vasut
Quoted 6 lines · Marek Vasut

Add more capable "bkops" command which allows enabling and disabling both manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is poorly named to cover all the possibilities, hence the new-ish subcommand. Note that both commands are wrappers around the same common code.

Best Regards,
Jaehoon Chung

Quoted 163 lines

---
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
---
V2: - Add kerneldoc comment to mmc_set_bkops_enable
- Drop ifdef around mmc_set_bkops_enable in mmc.h

---
 cmd/mmc.c         | 49 +++++++++++++++++++++++++++++++++++++++--------
 drivers/mmc/mmc.c | 14 +++++++++-----
 include/mmc.h     | 14 +++++++++++---
 3 files changed, 61 insertions(+), 16 deletions(-)
cmd/mmc.c +41 -8
index c79d9407986..94deb9a1686 100644
@@ -1020,16 +1020,12 @@ static int do_mmc_setdsr(struct cmd_tbl *cmdtp, int flag,
 }
 
 #ifdef CONFIG_CMD_BKOPS_ENABLE
-static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
-			       int argc, char *const argv[])
+static int mmc_bkops_common(char *device, bool autobkops, bool enable)
 {
-	int dev;
 	struct mmc *mmc;
+	int dev;
 
-	if (argc != 2)
-		return CMD_RET_USAGE;
-
-	dev = dectoul(argv[1], NULL);
+	dev = dectoul(device, NULL);
 
 	mmc = init_mmc_device(dev, false);
 	if (!mmc)
@@ -1040,7 +1036,41 @@ static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
 		return CMD_RET_FAILURE;
 	}
 
-	return mmc_set_bkops_enable(mmc);
+	return mmc_set_bkops_enable(mmc, autobkops, enable);
+}
+
+static int do_mmc_bkops(struct cmd_tbl *cmdtp, int flag,
+			int argc, char * const argv[])
+{
+	bool autobkops, enable;
+
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	if (!strcmp(argv[2], "manual"))
+		autobkops = false;
+	else if (!strcmp(argv[2], "auto"))
+		autobkops = true;
+	else
+		return CMD_RET_FAILURE;
+
+	if (!strcmp(argv[3], "disable"))
+		enable = false;
+	else if (!strcmp(argv[3], "enable"))
+		enable = true;
+	else
+		return CMD_RET_FAILURE;
+
+	return mmc_bkops_common(argv[1], autobkops, enable);
+}
+
+static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
+			       int argc, char * const argv[])
+{
+	if (argc != 2)
+		return CMD_RET_USAGE;
+
+	return mmc_bkops_common(argv[1], false, true);
 }
 #endif
 
@@ -1102,6 +1132,7 @@ static struct cmd_tbl cmd_mmc[] = {
 	U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),
 #ifdef CONFIG_CMD_BKOPS_ENABLE
 	U_BOOT_CMD_MKENT(bkops-enable, 2, 0, do_mmc_bkops_enable, "", ""),
+	U_BOOT_CMD_MKENT(bkops, 4, 0, do_mmc_bkops, "", ""),
 #endif
 };
 
@@ -1188,6 +1219,8 @@ U_BOOT_CMD(
 #ifdef CONFIG_CMD_BKOPS_ENABLE
 	"mmc bkops-enable <dev> - enable background operations handshake on device\n"
 	"   WARNING: This is a write-once setting.\n"
+	"mmc bkops <dev> [auto|manual] [enable|disable]\n"
+	" - configure background operations handshake on device\n"
 #endif
 	);
 
drivers/mmc/mmc.c +9 -5
index 210703ea46b..afbc497b12c 100644
@@ -3127,9 +3127,10 @@ int mmc_init_device(int num)
 #endif
 
 #ifdef CONFIG_CMD_BKOPS_ENABLE
-int mmc_set_bkops_enable(struct mmc *mmc)
+int mmc_set_bkops_enable(struct mmc *mmc, bool autobkops, bool enable)
 {
 	int err;
+	u32 bit = autobkops ? BIT(1) : BIT(0);
 	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
 
 	err = mmc_send_ext_csd(mmc, ext_csd);
@@ -3143,18 +3144,21 @@ int mmc_set_bkops_enable(struct mmc *mmc)
 		return -EMEDIUMTYPE;
 	}
 
-	if (ext_csd[EXT_CSD_BKOPS_EN] & 0x1) {
+	if (enable && (ext_csd[EXT_CSD_BKOPS_EN] & bit)) {
 		puts("Background operations already enabled\n");
 		return 0;
 	}
 
-	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN, 1);
+	err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BKOPS_EN,
+			 enable ? bit : 0);
 	if (err) {
-		puts("Failed to enable manual background operations\n");
+		printf("Failed to %sable manual background operations\n",
+		       enable ? "en" : "dis");
 		return err;
 	}
 
-	puts("Enabled manual background operations\n");
+	printf("%sabled %s background operations\n",
+	       enable ? "En" : "Dis", autobkops ? "auto" : "manual");
 
 	return 0;
 }
include/mmc.h +11 -3
index 571fa625d02..36dd841d5d1 100644
@@ -892,9 +892,17 @@ int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
 int mmc_rpmb_route_frames(struct mmc *mmc, void *req, unsigned long reqlen,
 			  void *rsp, unsigned long rsplen);
 
-#ifdef CONFIG_CMD_BKOPS_ENABLE
-int mmc_set_bkops_enable(struct mmc *mmc);
-#endif
+/**
+ * mmc_set_bkops_enable() - enable background operations
+ * @param mmc		Pointer to a MMC device struct
+ * @param autobkops	Enable automatic bkops, not manual bkops
+ * @param enable	Enable bkops, not disable
+ *
+ * Enable or disable automatic or manual background operation of the eMMC.
+ *
+ * Return: 0 on success, <0 on error.
+ */
+int mmc_set_bkops_enable(struct mmc *mmc, bool autobkops, bool enable);
 
 /**
  * Start device initialization and return immediately; it does not block on