cmd: mmc: Expand bkops handling
PATCH v2 1/1 cmd: mmc: Expand bkops handling
Add more capable "bkops" command which allows enabling and disabling both manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is poorly named to cover all the possibilities, hence the new-ish subcommand. Note that both commands are wrappers around the same common code.
---
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
---
V2: - Add kerneldoc comment to mmc_set_bkops_enable
- Drop ifdef around mmc_set_bkops_enable in mmc.h
--- cmd/mmc.c | 49 +++++++++++++++++++++++++++++++++++++++-------- drivers/mmc/mmc.c | 14 +++++++++----- include/mmc.h | 14 +++++++++++--- 3 files changed, 61 insertions(+), 16 deletions(-)
cmd/mmc.c +41 -8
@@ -1020,16 +1020,12 @@ static int do_mmc_setdsr(struct cmd_tbl *cmdtp, int flag, }#ifdef CONFIG_CMD_BKOPS_ENABLE -static int do_mmc_bkops_enable (struct cmd_tbl *cmdtp,int flag, -int argc,char *const argv[]) +static int mmc_bkops_common (char *device,bool autobkops,bool enable) { -int dev;struct mmc *mmc; +int dev; -if (argc !=2 ) -return CMD_RET_USAGE ; - - dev =dectoul (argv[1 ],NULL ); + dev =dectoul (device,NULL ); mmc =init_mmc_device (dev, false);if (!mmc)
@@ -1040,7 +1036,41 @@ static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag, return CMD_RET_FAILURE; } -return mmc_set_bkops_enable (mmc); +return mmc_set_bkops_enable (mmc, autobkops, enable); +} + +static int do_mmc_bkops (struct cmd_tbl *cmdtp,int flag, +int argc,char *const argv[]) +{ +bool autobkops, enable; + +if (argc !=4 ) +return CMD_RET_USAGE ; + +if (!strcmp (argv[2 ],"manual" )) + autobkops = false; +else if (!strcmp (argv[2 ],"auto" )) + autobkops = true; +else +return CMD_RET_FAILURE ; + +if (!strcmp (argv[3 ],"disable" )) + enable = false; +else if (!strcmp (argv[3 ],"enable" )) + enable = true; +else +return CMD_RET_FAILURE ; + +return mmc_bkops_common (argv[1 ], autobkops, enable); +} + +static int do_mmc_bkops_enable (struct cmd_tbl *cmdtp,int flag, +int argc,char *const argv[]) +{ +if (argc !=2 ) +return CMD_RET_USAGE ; + +return mmc_bkops_common (argv[1 ], false, true); }#endif
@@ -1102,6 +1132,7 @@ static struct cmd_tbl cmd_mmc[] = { U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),#ifdef CONFIG_CMD_BKOPS_ENABLE U_BOOT_CMD_MKENT (bkops-enable,2 ,0 , do_mmc_bkops_enable,"" ,"" ), + U_BOOT_CMD_MKENT(bkops, 4, 0, do_mmc_bkops, "", ""), #endif };
@@ -1188,6 +1219,8 @@ U_BOOT_CMD(#ifdef CONFIG_CMD_BKOPS_ENABLE "mmc bkops-enable <dev> - enable background operations handshake on device\n" " WARNING: This is a write-once setting.\n" +"mmc bkops <dev> [auto|manual] [enable|disable]\n" +" - configure background operations handshake on device\n" #endif );
drivers/mmc/mmc.c +9 -5
@@ -3127,9 +3127,10 @@ int mmc_init_device(int num)#endif #ifdef CONFIG_CMD_BKOPS_ENABLE -int mmc_set_bkops_enable (struct mmc *mmc) +int mmc_set_bkops_enable (struct mmc *mmc,bool autobkops,bool enable) {int err; +u32 bit = autobkops ?BIT (1 ) :BIT (0 );ALLOC_CACHE_ALIGN_BUFFER (u8, ext_csd,MMC_MAX_BLOCK_LEN ); err =mmc_send_ext_csd (mmc, ext_csd);
@@ -3143,18 +3144,21 @@ int mmc_set_bkops_enable(struct mmc *mmc)return -EMEDIUMTYPE ; } -if (ext_csd[EXT_CSD_BKOPS_EN ] &0x1 ) { +if (enable && (ext_csd[EXT_CSD_BKOPS_EN ] & bit)) {puts ("Background operations already enabled\n" );return 0 ; } - err =mmc_switch (mmc,EXT_CSD_CMD_SET_NORMAL ,EXT_CSD_BKOPS_EN ,1 ); + err =mmc_switch (mmc,EXT_CSD_CMD_SET_NORMAL ,EXT_CSD_BKOPS_EN , + enable ? bit :0 );if (err) { -puts ("Failed to enable manual background operations\n" ); +printf ("Failed to %sable manual background operations\n" , + enable ?"en" :"dis" );return err; } -puts ("Enabled manual background operations\n" ); +printf ("%sabled %s background operations\n" , + enable ?"En" :"Dis" , autobkops ?"auto" :"manual" );return 0 ; }
include/mmc.h +11 -3
@@ -892,9 +892,17 @@ int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,int mmc_rpmb_route_frames (struct mmc *mmc,void *req,unsigned long reqlen,void *rsp,unsigned long rsplen); -#ifdef CONFIG_CMD_BKOPS_ENABLE -int mmc_set_bkops_enable (struct mmc *mmc); -#endif +/** +* mmc_set_bkops_enable() - enable background operations +* @param mmc Pointer to a MMC device struct +* @param autobkops Enable automatic bkops, not manual bkops +* @param enable Enable bkops, not disable +* +* Enable or disable automatic or manual background operation of the eMMC. +* +* Return: 0 on success, <0 on error. +*/ +int mmc_set_bkops_enable (struct mmc *mmc,bool autobkops,bool enable);/** * Start device initialization and return immediately; it does not block on
Signature · 1 line
2.39.0
Quoted 13 lines · Marek Vasut
Add more capable "bkops" command which allows enabling and disabling both manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is poorly named to cover all the possibilities, hence the new-ish subcommand. Note that both commands are wrappers around the same common code.
Signed-off-by Marek Vasut <[email protected]>---
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
---
V2: - Add kerneldoc comment tommc_set_bkops_enable
- Drop ifdef aroundmmc_set_bkops_enableinmmc.h
Quoted 5 lines
--- cmd/mmc.c | 49 +++++++++++++++++++++++++++++++++++++++-------- drivers/mmc/mmc.c | 14 +++++++++----- include/mmc.h | 14 +++++++++++--- 3 files changed, 61 insertions(+), 16 deletions(-)
Quoted 6 lines · Marek Vasut
Add more capable "bkops" command which allows enabling and disabling both manual and automatic bkops. The existing 'mmc bkops-enable' subcommand is poorly named to cover all the possibilities, hence the new-ish subcommand. Note that both commands are wrappers around the same common code.
Signed-off-by Marek Vasut <[email protected]>
Best Regards,
Jaehoon Chung
Quoted 163 lines
---
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
---
V2: - Add kerneldoc comment tommc_set_bkops_enable
- Drop ifdef aroundmmc_set_bkops_enableinmmc.h--- cmd/mmc.c | 49 +++++++++++++++++++++++++++++++++++++++-------- drivers/mmc/mmc.c | 14 +++++++++----- include/mmc.h | 14 +++++++++++--- 3 files changed, 61 insertions(+), 16 deletions(-)cmd/mmc.c +41
-8@@ -1020,16 +1020,12 @@ static int do_mmc_setdsr(struct cmd_tbl *cmdtp, int flag, }#ifdef CONFIG_CMD_BKOPS_ENABLE -static int do_mmc_bkops_enable (struct cmd_tbl *cmdtp,int flag, -int argc,char *const argv[]) +static int mmc_bkops_common (char *device,bool autobkops,bool enable) { -int dev;struct mmc *mmc; +int dev; -if (argc !=2 ) -return CMD_RET_USAGE ; - - dev =dectoul (argv[1 ],NULL ); + dev =dectoul (device,NULL ); mmc =init_mmc_device (dev, false);if (!mmc)@@ -1040,7 +1036,41 @@ static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag, return CMD_RET_FAILURE; } -return mmc_set_bkops_enable (mmc); +return mmc_set_bkops_enable (mmc, autobkops, enable); +} + +static int do_mmc_bkops (struct cmd_tbl *cmdtp,int flag, +int argc,char *const argv[]) +{ +bool autobkops, enable; + +if (argc !=4 ) +return CMD_RET_USAGE ; + +if (!strcmp (argv[2 ],"manual" )) + autobkops = false; +else if (!strcmp (argv[2 ],"auto" )) + autobkops = true; +else +return CMD_RET_FAILURE ; + +if (!strcmp (argv[3 ],"disable" )) + enable = false; +else if (!strcmp (argv[3 ],"enable" )) + enable = true; +else +return CMD_RET_FAILURE ; + +return mmc_bkops_common (argv[1 ], autobkops, enable); +} + +static int do_mmc_bkops_enable (struct cmd_tbl *cmdtp,int flag, +int argc,char *const argv[]) +{ +if (argc !=2 ) +return CMD_RET_USAGE ; + +return mmc_bkops_common (argv[1 ], false, true); }#endif @@ -1102,6 +1132,7 @@ static struct cmd_tbl cmd_mmc[] = { U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),#ifdef CONFIG_CMD_BKOPS_ENABLE U_BOOT_CMD_MKENT (bkops-enable,2 ,0 , do_mmc_bkops_enable,"" ,"" ), + U_BOOT_CMD_MKENT(bkops, 4, 0, do_mmc_bkops, "", ""), #endif };@@ -1188,6 +1219,8 @@ U_BOOT_CMD(#ifdef CONFIG_CMD_BKOPS_ENABLE "mmc bkops-enable <dev> - enable background operations handshake on device\n" " WARNING: This is a write-once setting.\n" +"mmc bkops <dev> [auto|manual] [enable|disable]\n" +" - configure background operations handshake on device\n" #endif );drivers/mmc/mmc.c +9
-5@@ -3127,9 +3127,10 @@ int mmc_init_device(int num)#endif #ifdef CONFIG_CMD_BKOPS_ENABLE -int mmc_set_bkops_enable (struct mmc *mmc) +int mmc_set_bkops_enable (struct mmc *mmc,bool autobkops,bool enable) {int err; +u32 bit = autobkops ?BIT (1 ) :BIT (0 );ALLOC_CACHE_ALIGN_BUFFER (u8, ext_csd,MMC_MAX_BLOCK_LEN ); err =mmc_send_ext_csd (mmc, ext_csd);@@ -3143,18 +3144,21 @@ int mmc_set_bkops_enable(struct mmc *mmc)return -EMEDIUMTYPE ; } -if (ext_csd[EXT_CSD_BKOPS_EN ] &0x1 ) { +if (enable && (ext_csd[EXT_CSD_BKOPS_EN ] & bit)) {puts ("Background operations already enabled\n" );return 0 ; } - err =mmc_switch (mmc,EXT_CSD_CMD_SET_NORMAL ,EXT_CSD_BKOPS_EN ,1 ); + err =mmc_switch (mmc,EXT_CSD_CMD_SET_NORMAL ,EXT_CSD_BKOPS_EN , + enable ? bit :0 );if (err) { -puts ("Failed to enable manual background operations\n" ); +printf ("Failed to %sable manual background operations\n" , + enable ?"en" :"dis" );return err; } -puts ("Enabled manual background operations\n" ); +printf ("%sabled %s background operations\n" , + enable ?"En" :"Dis" , autobkops ?"auto" :"manual" );return 0 ; }include/mmc.h +11
-3@@ -892,9 +892,17 @@ int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,int mmc_rpmb_route_frames (struct mmc *mmc,void *req,unsigned long reqlen,void *rsp,unsigned long rsplen); -#ifdef CONFIG_CMD_BKOPS_ENABLE -int mmc_set_bkops_enable (struct mmc *mmc); -#endif +/** +* mmc_set_bkops_enable() - enable background operations +* @param mmc Pointer to a MMC device struct +* @param autobkops Enable automatic bkops, not manual bkops +* @param enable Enable bkops, not disable +* +* Enable or disable automatic or manual background operation of the eMMC. +* +* Return: 0 on success, <0 on error. +*/ +int mmc_set_bkops_enable (struct mmc *mmc,bool autobkops,bool enable);/** * Start device initialization and return immediately; it does not block on