Skip to contentSkip to conversation

4.14.303-rc1 review

PATCH In review Greg Kroah-Hartman 6 participants 346 messages Jan 16, 2023 – Jan 22, 2023 Page 1 of 2

Subsystems (6)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.14.303-rc1 review

This is the start of the stable review cycle for the 4.14.303 release. There are 338 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 18 Jan 2023 15:47:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.303-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.303-rc1

Ferry Toth <[email protected]>
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

Minsuk Kang <[email protected]>
nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()

Roger Pau Monne <[email protected]>
hvc/xen: lock console list traversal

Ricardo Ribalda <[email protected]>
regulator: da9211: Use irq handler when ready

Eliav Farber <[email protected]>
EDAC/device: Fix period calculation in edac_device_reset_delay_period()

Peter Zijlstra <[email protected]>
x86/boot: Avoid using Intel mnemonics in AT&T syntax asm

Gavrilov Ilia <[email protected]>
netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.

Herbert Xu <[email protected]>
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames

Hans de Goede <[email protected]>

    platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe

Clement Lecigne <[email protected]>
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF

Paolo Abeni <[email protected]>
net/ulp: prevent ULP without clone op from entering the LISTEN status

Heiko Carstens <[email protected]>
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()

Adrian Hunter <[email protected]>
perf auxtrace: Fix address filter duplicate symbol selection

Jonathan Corbet <[email protected]>
docs: Fix the docs build with Sphinx 6.0

Frederick Lawler <[email protected]>
net: sched: disallow noqueue for qdisc classes

Biju Das <[email protected]>
ravb: Fix "failed to switch device to config mode" message during unbind

Isaac J. Manjarres <[email protected]>
driver core: Fix bus_type.match() error handling in __driver_attach()

Helge Deller <[email protected]>
parisc: Align parisc MADV_XXX constants with all other architectures

Linus Torvalds <[email protected]>
hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling

Arnd Bergmann <[email protected]>
hfs/hfsplus: use WARN_ON for sanity check

Jeff Layton <[email protected]>
nfsd: fix handling of readdir in v4root vs. mount upcall timeout

Rodrigo Branco <[email protected]>
x86/bugs: Flush IBP in ib_prctl_set()

Jan Kara <[email protected]>
udf: Fix extension of the last extent in the file

Zhengchao Shao <[email protected]>
caif: fix memory leak in cfctrl_linkup_request()

Szymon Heidrich <[email protected]>
usb: rndis_host: Secure rndis_query check against int overflow

Jamal Hadi Salim <[email protected]>
net: sched: atm: dont intepret cls results when asked to drop

Miaoqian Lin <[email protected]>
net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe

Jiguang Xiao <[email protected]>
net: amd-xgbe: add missed tasklet_kill

Miaoqian Lin <[email protected]>
nfc: Fix potential resource leaks

Daniil Tatianin <[email protected]>

    qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure

Jakub Kicinski <[email protected]>
bpf: pull before calling skb_postpull_rcsum()

minoura makoto <[email protected]>
SUNRPC: ensure the matching upcall is in-flight upon downcall

Ye Bin <[email protected]>
ext4: allocate extended attribute value in vmalloc area

Jan Kara <[email protected]>
ext4: avoid unaccounted block allocation when expanding inode

Jan Kara <[email protected]>
ext4: initialize quota before expanding inode in setproject ioctl

Ye Bin <[email protected]>
ext4: fix inode leak in ext4_xattr_inode_create() on an error path

Jan Kara <[email protected]>
ext4: avoid BUG_ON when creating xattrs

Luís Henriques <[email protected]>
ext4: fix error code return to user-space in ext4_get_branch()

Ye Bin <[email protected]>
ext4: init quota for 'old.inode' in 'ext4_rename'

Baokun Li <[email protected]>
ext4: fix bug_on in __es_tree_search caused by bad boot loader inode

Gaosheng Cui <[email protected]>
ext4: fix undefined behavior in bit shift for ext4_check_flag_values

Baokun Li <[email protected]>
ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop

Zack Rusin <[email protected]>
drm/vmwgfx: Validate the box size for the snooped cursor

Simon Ser <[email protected]>
drm/connector: send hotplug uevent on connector cleanup

Wang Weiyang <[email protected]>
device_cgroup: Roll back to original exceptions after copy failure

Shang XiaoJing <[email protected]>
parisc: led: Fix potential null-ptr-deref in start_task()

Kim Phillips <[email protected]>
iommu/amd: Fix ivrs_acpihid cmdline parsing code

Corentin Labbe <[email protected]>
crypto: n2 - add missing hash statesize

Sascha Hauer <[email protected]>
PCI/sysfs: Fix double free in error path

Michael S. Tsirkin <[email protected]>
PCI: Fix pci_device_is_present() for VFs by checking PF

Huaxin Lu <[email protected]>
ima: Fix a potential NULL pointer access in ima_restore_measurement_list

Paulo Alcantara <[email protected]>
cifs: fix confusing debug message

Takashi Iwai <[email protected]>
media: dvb-core: Fix UAF due to refcount races at releasing

Keita Suzuki <[email protected]>
media: dvb-core: Fix double free in dvb_register_device()

Nick Desaulniers <[email protected]>
ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod

Yang Jihong <[email protected]>
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line

Ashok Raj <[email protected]>
x86/microcode/intel: Do not retry microcode reloading on the APs

Mike Snitzer <[email protected]>
dm cache: set needs_check flag after aborting metadata

Luo Meng <[email protected]>
dm cache: Fix UAF in destroy()

Luo Meng <[email protected]>
dm thin: Fix UAF in run_timer_softirq()

Zhihao Cheng <[email protected]>

    dm thin: Use last transaction's pmd->root when commit failed

Mike Snitzer <[email protected]>
dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort

Mickaël Salaün <[email protected]>
selftests: Use optional USERCFLAGS and USERLDFLAGS

Jason A. Donenfeld <[email protected]>
ARM: ux500: do not directly dereference __iomem

Steven Rostedt <[email protected]>
ktest.pl minconfig: Unset configs instead of just removing them

Jason A. Donenfeld <[email protected]>
media: stv0288: use explicitly signed char

Hanjun Guo <[email protected]>
tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak

Hanjun Guo <[email protected]>
tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak

Deren Wu <[email protected]>
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING

Mikulas Patocka <[email protected]>
md: fix a crash in mempool_free

Christian Brauner <[email protected]>
pnode: terminate at peers of source

Artem Egorkine <[email protected]>
ALSA: line6: fix stack overflow in line6_midi_transmit

Artem Egorkine <[email protected]>
ALSA: line6: correct midi status byte when receiving data from podxt

Aditya Garg <[email protected]>
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount

Terry Junge <[email protected]>
HID: plantronics: Additional PIDs for double volume key presses quirk

Nathan Lynch <[email protected]>
powerpc/rtas: avoid scheduling in rtas_os_term()

Nathan Lynch <[email protected]>
powerpc/rtas: avoid device tree lookups in rtas_os_term()

Lin Ma <[email protected]>
media: dvbdev: fix refcnt bug

Rickard x Andersson <[email protected]>
gcov: add support for checksum field

Nuno Sá <[email protected]>
iio: adc: ad_sigma_delta: do not use internal iio_dev lock

Roberto Sassu <[email protected]>
reiserfs: Add missing calls to reiserfs_security_free()

Jason Gerecke <[email protected]>
HID: wacom: Ensure bootloader PID is usable in hidraw mode

Ferry Toth <[email protected]>
usb: dwc3: core: defer probe on ulpi_read_id timeout

John Stultz <[email protected]>
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES

John Stultz <[email protected]>
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion

Hans de Goede <[email protected]>
ASoC: rt5670: Remove unbalanced pm_runtime_put()

Wang Jingjin <[email protected]>
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()

Marek Szyprowski <[email protected]>
ASoC: wm8994: Fix potential deadlock

Wang Jingjin <[email protected]>
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()

Wang Yufen <[email protected]>

    ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()

Zhang Xiaoxu <[email protected]>
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()

Nathan Chancellor <[email protected]>
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()

Nathan Chancellor <[email protected]>
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()

Xiu Jianfeng <[email protected]>
clk: st: Fix memory leak in st_of_quadfs_setup()

Shigeru Yoshida <[email protected]>

    media: si470x: Fix use-after-free in si470x_int_in_callback()

Kunihiko Hayashi <[email protected]>
mmc: f-sdh30: Add quirks for broken timeout clock capability

Ye Bin <[email protected]>
blk-mq: fix possible memleak when register 'hctx' failed

Mazin Al Haddad <[email protected]>
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()

Lin Ma <[email protected]>
media: dvbdev: adopts refcnt to avoid UAF

Yan Lei <[email protected]>
media: dvb-frontends: fix leak of memory fw

Stanislav Fomichev <[email protected]>
ppp: associate skb with a device at tx

Schspa Shi <[email protected]>
mrp: introduce active flags to prevent UAF when applicant uninit

Jiang Li <[email protected]>
md/raid1: stop mdx_raid1 thread when raid1 array run failed

Ville Syrjälä <[email protected]>
drm/sti: Use drm_mode_copy()

Nathan Chancellor <[email protected]>
s390/lcs: Fix return type of lcs_start_xmit()

Nathan Chancellor <[email protected]>
s390/netiucv: Fix return type of netiucv_tx()

Nathan Chancellor <[email protected]>
s390/ctcm: Fix return type of ctc{mp,}m_tx()

Kees Cook <[email protected]>
igb: Do not free q_vector unless new one was allocated

Minsuk Kang <[email protected]>
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()

Nathan Chancellor <[email protected]>
hamradio: baycom_epp: Fix return type of baycom_send_packet()

Nathan Chancellor <[email protected]>
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()

Stanislav Fomichev <[email protected]>

    bpf: make sure skb->len != 0 when redirecting to a tunneling device

Zhang Yuchen <[email protected]>
ipmi: fix memleak when unload ipmi driver

Amadeusz Sławiński <[email protected]>
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform

Shigeru Yoshida <[email protected]>

    wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out

Fedor Pchelkin <[email protected]>
wifi: ath9k: verify the expected usb_endpoints are present

ZhangPeng <[email protected]>
hfs: fix OOB Read in __hfs_brec_find

Zheng Yejian <[email protected]>
acct: fix potential integer overflow in encode_comp_t()

Ryusuke Konishi <[email protected]>
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()

Rafael J. Wysocki <[email protected]>
ACPICA: Fix error code path in acpi_ds_call_control_method()

Hoi Pok Wu <[email protected]>
fs: jfs: fix shift-out-of-bounds in dbDiscardAG

Shigeru Yoshida <[email protected]>
udf: Avoid double brelse() in udf_rename()

Dongliang Mu <[email protected]>
fs: jfs: fix shift-out-of-bounds in dbAllocAG

Liu Shixin <[email protected]>
binfmt_misc: fix shift-out-of-bounds in check_special_flags

Eric Dumazet <[email protected]>
net: stream: purge sk_error_queue in sk_stream_kill_queues()

Christophe JAILLET <[email protected]>
myri10ge: Fix an error handling path in myri10ge_probe()

Cong Wang <[email protected]>
net_sched: reject TCF_EM_SIMPLE case for complex ematch module

Subash Abhinov Kasiviswanathan <[email protected]>
skbuff: Account for tail adjustment during pull operations

Eelco Chaudron <[email protected]>
openvswitch: Fix flow lookup to use unmasked key

Li Zetao <[email protected]>
r6040: Fix kmemleak in probe and remove

Minsuk Kang <[email protected]>
nfc: pn533: Clear nfc_target before being used

Yang Yingliang <[email protected]>
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()

Dan Aloni <[email protected]>
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure

Gaosheng Cui <[email protected]>
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()

Miaoqian Lin <[email protected]>
selftests/powerpc: Fix resource leaks

Kajol Jain <[email protected]>
powerpc/hv-gpci: Fix hv_gpci event list

Yang Yingliang <[email protected]>
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()

Nicholas Piggin <[email protected]>
powerpc/perf: callchain validate kernel stack pointer bounds

Yang Yingliang <[email protected]>
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()

Miaoqian Lin <[email protected]>
cxl: Fix refcount leak in cxl_calc_capp_routing

Christophe JAILLET <[email protected]>
powerpc/52xx: Fix a resource leak in an error handling path

Xie Shaowen <[email protected]>
macintosh/macio-adb: check the return value of ioremap()

Yang Yingliang <[email protected]>
macintosh: fix possible memory leak in macio_add_one_device()

Yuan Can <[email protected]>
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()

Yang Yingliang <[email protected]>
iommu/amd: Fix pci device refcount leak in ppr_notifier()

Stefan Eichenberger <[email protected]>
rtc: snvs: Allow a time difference on clock register read

Matt Redfearn <[email protected]>
include/uapi/linux/swab: Fix potentially missing __always_inline

Yuan Can <[email protected]>
HSI: omap_ssi_core: Fix error handling in ssi_init()

Zeng Heng <[email protected]>
power: supply: fix residue sysfs file in error handle route of __power_supply_register()

Yang Yingliang <[email protected]>
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()

Yang Yingliang <[email protected]>
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()

Christophe JAILLET <[email protected]>
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()

Xiongfeng Wang <[email protected]>
fbdev: vermilion: decrease reference count in error path

Shang XiaoJing <[email protected]>
fbdev: via: Fix error in via_core_init()

Yang Yingliang <[email protected]>
fbdev: pm2fb: fix missing pci_disable_device()

Andy Shevchenko <[email protected]>
fbdev: ssd1307fb: Drop optional dependency

Jiasheng Jiang <[email protected]>
usb: storage: Add check for kcalloc

Zheyu Ma <[email protected]>
i2c: ismt: Fix an out-of-bounds bug in ismt_access()

Chen Zhongjin <[email protected]>
vme: Fix error not catched in fake_init()

YueHaibing <[email protected]>
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()

Dan Carpenter <[email protected]>

    staging: rtl8192u: Fix use after free in ieee80211_rx()

Hui Tang <[email protected]>
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe

Yang Yingliang <[email protected]>
chardev: fix error handling in cdev_device_add()

Yang Yingliang <[email protected]>
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()

Zhengchao Shao <[email protected]>
drivers: mcb: fix resource leak in mcb_probe()

Yang Yingliang <[email protected]>
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()

Yang Yingliang <[email protected]>
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()

Zheng Wang <[email protected]>
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os

ruanjinjie <[email protected]>
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()

Zhengchao Shao <[email protected]>
test_firmware: fix memory leak in test_firmware_init()

Yuan Can <[email protected]>
serial: sunsab: Fix error handling in sunsab_init()

Xiongfeng Wang <[email protected]>
serial: pch: Fix PCI device refcount leak in pch_request_dma()

Jiamei Xie <[email protected]>
serial: amba-pl011: avoid SBSA UART accessing DMACR register

Gaosheng Cui <[email protected]>
staging: vme_user: Fix possible UAF in tsi148_dma_list_add

Linus Walleij <[email protected]>
usb: fotg210-udc: Fix ages old endianness issues

Rafael Mendonca <[email protected]>
uio: uio_dmem_genirq: Fix deadlock between irq config and handling

Rafael Mendonca <[email protected]>
uio: uio_dmem_genirq: Fix missing unlock in irq configuration

Rafael Mendonca <[email protected]>
vfio: platform: Do not pass return buffer to ACPI _RST method

Yang Yingliang <[email protected]>
class: fix possible memory leak in __class_register()

Yang Yingliang <[email protected]>
drivers: dio: fix possible memory leak in dio_init()

Dragos Tatulea <[email protected]>
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces

Xiongfeng Wang <[email protected]>
hwrng: geode - Fix PCI device refcount leak

Xiongfeng Wang <[email protected]>
hwrng: amd - Fix PCI device refcount leak

Gaosheng Cui <[email protected]>

    crypto: img-hash - Fix variable dereferenced before check 'hdev->req'

Zhang Xiaoxu <[email protected]>
orangefs: Fix sysfs not cleanup when dev init failed

Wang Yufen <[email protected]>
RDMA/hfi1: Fix error return code in parse_platform_config()

Gaosheng Cui <[email protected]>
scsi: snic: Fix possible UAF in snic_tgt_create()

Chen Zhongjin <[email protected]>
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails

Shang XiaoJing <[email protected]>
scsi: ipr: Fix WARNING in ipr_init()

Yang Yingliang <[email protected]>
scsi: fcoe: Fix possible name leak when device_register() fails

Yang Yingliang <[email protected]>
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()

Yang Yingliang <[email protected]>
scsi: hpsa: Fix error handling in hpsa_add_sas_host()

Zhang Xiaoxu <[email protected]>
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed

Xiongfeng Wang <[email protected]>
RDMA/hfi: Decrease PCI device reference count in error path

Zeng Heng <[email protected]>
PCI: Check for alloc failure in pci_request_irq()

Gaosheng Cui <[email protected]>
apparmor: fix a memleak in multi_transaction_new()

Piergiorgio Beruto <[email protected]>
stmmac: fix potential division by 0

Yang Yingliang <[email protected]>
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()

Eric Pilmore <[email protected]>
ntb_netdev: Use dev_kfree_skb_any() in interrupt context

Jerry Ray <[email protected]>
net: lan9303: Fix read error execution path

Tom Lendacky <[email protected]>
net: amd-xgbe: Check only the minimum speed for active/passive cables

Yang Yingliang <[email protected]>
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()

Yang Yingliang <[email protected]>
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()

Hangbin Liu <[email protected]>
net/tunnel: wait until all sk_user_data reader finish before releasing the sock

Li Zetao <[email protected]>
net: farsync: Fix kmemleak when rmmods farsync

Yang Yingliang <[email protected]>
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()

Yuan Can <[email protected]>
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()

Yongqiang Liu <[email protected]>
net: defxx: Fix missing err handling in dfx_init()

Artem Chernyshev <[email protected]>
net: vmw_vsock: vmci: Check memcpy_from_msg()

Yang Jihong <[email protected]>
blktrace: Fix output non-blktrace event when blk_classic option enabled

Wang Yufen <[email protected]>
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()

Bitterblue Smith <[email protected]>
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h

Xiu Jianfeng <[email protected]>
clk: samsung: Fix memory leak in _samsung_clk_register_pll()

Jiasheng Jiang <[email protected]>
media: coda: Add check for kmalloc

Jiasheng Jiang <[email protected]>
media: coda: Add check for dcoda_iram_alloc

Liang He <[email protected]>
media: c8sectpfe: Add of_node_put() when breaking out of loop

Yang Yingliang <[email protected]>
mmc: mmci: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: wbsd: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: via-sdmmc: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: wmt-sdmmc: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: vub300: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: toshsd: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: mxcmmc: fix return value check of mmc_add_host()

Yang Yingliang <[email protected]>
mmc: moxart: fix return value check of mmc_add_host()

Trond Myklebust <[email protected]>
NFSv4.x: Fail client initialisation if state manager thread can't run

Wang ShaoBo <[email protected]>
SUNRPC: Fix missing release socket in rpc_sockname()

Gaosheng Cui <[email protected]>
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt

Liu Shixin <[email protected]>
media: saa7164: fix missing pci_disable_device()

Yang Yingliang <[email protected]>
regulator: core: fix module refcount leak in set_supply()

Zhengchao Shao <[email protected]>

    wifi: mac80211: fix memory leak in ieee80211_if_add()

Dan Carpenter <[email protected]>
bonding: uninitialized variable in bond_miimon_inspect()

Zhang Qilong <[email protected]>
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe

Xiongfeng Wang <[email protected]>
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()

Xiongfeng Wang <[email protected]>
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()

Liu Shixin <[email protected]>
ALSA: asihpi: fix missing pci_disable_device()

Trond Myklebust <[email protected]>
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn

Trond Myklebust <[email protected]>
NFSv4.2: Fix a memory stomp in decode_attr_security_label

Aakarsh Jain <[email protected]>
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC

Baisong Zhong <[email protected]>

    media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()

ZhangPeng <[email protected]>
pinctrl: pinconf-generic: add missing of_node_put()

Gautam Menghani <[email protected]>
media: imon: fix a race condition in send_packet()

Zheng Yongjun <[email protected]>
mtd: maps: pxa2xx-flash: fix memory leak in probe

Xiu Jianfeng <[email protected]>
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()

Baisong Zhong <[email protected]>
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT

Marcus Folkesson <[email protected]>
HID: hid-sensor-custom: set fixed size for custom attributes

Yuan Can <[email protected]>
media: platform: exynos4-is: Fix error handling in fimc_md_init()

Yang Yingliang <[email protected]>
media: solo6x10: fix possible memory leak in solo_sysfs_init()

Douglas Anderson <[email protected]>
Input: elants_i2c - properly handle the reset GPIO when power is off

Hui Tang <[email protected]>
mtd: lpddr2_nvm: Fix possible null-ptr-deref

Xiu Jianfeng <[email protected]>
wifi: ath10k: Fix return value in ath10k_pci_init()

Xiu Jianfeng <[email protected]>
ima: Fix misuse of dereference of pointer in template_desc_init_fields()

Yang Yingliang <[email protected]>
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()

Zeng Heng <[email protected]>
ASoC: pxa: fix null-pointer dereference in filter()

Hanjun Guo <[email protected]>
drm/radeon: Add the missed acpi_put_table() to fix memory leak

Vladimir Zapolskiy <[email protected]>
media: camss: Clean up received buffers on failed start of streaming

Zhang Xiaoxu <[email protected]>
mtd: Fix device name leak when register device failed in add_mtd_device()

Liu Shixin <[email protected]>
media: vivid: fix compose size exceed boundary

Jonathan Neuschäfer <[email protected]>
spi: Update reference to struct spi_controller

Ricardo Ribalda <[email protected]>
media: i2c: ad5820: Fix error path

Fedor Pchelkin <[email protected]>
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()

Fedor Pchelkin <[email protected]>
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()

Cai Xinchen <[email protected]>
rapidio: devices: fix missing put_device in mport_cdev_open

ZhangPeng <[email protected]>
hfs: Fix OOB Write in hfs_asc2mac

Zhang Qilong <[email protected]>
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD

Wang Weiyang <[email protected]>
rapidio: fix possible UAF when kfifo_alloc() fails

Chen Zhongjin <[email protected]>
fs: sysv: Fix sysv_nblocks() returns wrong value

Anastasia Belova <[email protected]>
MIPS: BCM63xx: Add check for NULL for clk in clk_enable

Yu Liao <[email protected]>
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()

Xiu Jianfeng <[email protected]>
x86/xen: Fix memory leak in xen_init_lock_cpu()

Oleg Nesterov <[email protected]>

    uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix

Li Zetao <[email protected]>
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()

Yang Yingliang <[email protected]>
rapidio: rio: fix possible name leak in rio_register_mport()

Yang Yingliang <[email protected]>
rapidio: fix possible name leaks when rio_add_device() fails

Akinobu Mita <[email protected]>
lib/notifier-error-inject: fix error when writing -errno to debugfs file

Akinobu Mita <[email protected]>
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value

Shang XiaoJing <[email protected]>
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()

Yang Yingliang <[email protected]>
PNP: fix name memory leak in pnp_alloc_dev()

Yang Yingliang <[email protected]>
MIPS: vpe-cmp: fix possible memory leak while module exiting

Yang Yingliang <[email protected]>
MIPS: vpe-mt: fix possible memory leak while module exiting

Shang XiaoJing <[email protected]>
ocfs2: fix memory leak in ocfs2_stack_glue_init()

Barnabás Pőcze <[email protected]>
timerqueue: Use rb_entry_safe() in timerqueue_getnext()

Chen Zhongjin <[email protected]>
perf: Fix possible memleak in pmu_dev_alloc()

Ondrej Mosnacek <[email protected]>
fs: don't audit the capability check in simple_xattr_list()

xiongxin <[email protected]>
PM: hibernate: Fix mistake in kerneldoc comment

Al Viro <[email protected]>
alpha: fix syscall entry in !AUDUT_SYSCALL case

Ulf Hansson <[email protected]>
cpuidle: dt: Return the correct numbers of parsed idle states

Michael Kelley <[email protected]>
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()

Stephen Boyd <[email protected]>
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP

Doug Brown <[email protected]>
ARM: mmp: fix timer_read delay

Wang Yufen <[email protected]>
pstore/ram: Fix error return code in ramoops_probe()

Pali Rohár <[email protected]>
ARM: dts: turris-omnia: Add switch port 6 node

Pali Rohár <[email protected]>
ARM: dts: turris-omnia: Add ethernet aliases

Pali Rohár <[email protected]>
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port

Pali Rohár <[email protected]>
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port

Pali Rohár <[email protected]>
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port

Pali Rohár <[email protected]>
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port

Pali Rohár <[email protected]>
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port

Pali Rohár <[email protected]>
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port

AngeloGioacchino Del Regno <[email protected]>
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name

Zhang Qilong <[email protected]>
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe

Kory Maincent <[email protected]>
arm: dts: spear600: Fix clcd interrupt

Chen Jiahao <[email protected]>
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static

Luca Weiss <[email protected]>
ARM: dts: qcom: apq8064: fix coresight compatible

Ivaylo Dimitrov <[email protected]>
usb: musb: remove extra check in musb_gadget_vbus_draw

Rasmus Villemoes <[email protected]>
net: loopback: use NET_NAME_PREDICTABLE for name_assign_type

Sungwoo Kim <[email protected]>
Bluetooth: L2CAP: Fix u8 overflow

Tony Nguyen <[email protected]>
igb: Initialize mailbox message for VF reset

Bruno Thomsen <[email protected]>

    USB: serial: cp210x: add Kamstrup RF sniffer PIDs

Duke Xin <[email protected]>
USB: serial: option: add Quectel EM05-G modem

Szymon Heidrich <[email protected]>
usb: gadget: uvc: Prevent buffer overflow in setup handler

Jan Kara <[email protected]>
udf: Fix extending file within last block

Jan Kara <[email protected]>
udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size

Jan Kara <[email protected]>
udf: Fix preallocation discarding at indirect extent boundary

Jan Kara <[email protected]>
udf: Drop unused arguments of udf_delete_aext()

Jan Kara <[email protected]>
udf: Discard preallocation before extending file with a hole

Tony Jones <[email protected]>
perf script python: Remove explicit shebang from tests/attr.c

Charles Keepax <[email protected]>
ASoC: ops: Correct bounds check for second channel on SX controls

Yasushi SHOJI <[email protected]>
can: mcba_usb: Fix termination command argument

Heiko Schocher <[email protected]>
can: sja1000: fix size of OCR_MODE_MASK define

Mark Brown <[email protected]>
ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()

Jialiang Wang <[email protected]>
nfp: fix use-after-free in area_cache_get()

Ming Lei <[email protected]>
block: unhash blkdev part inode when the part is deleted

Jann Horn <[email protected]>
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths

Jann Horn <[email protected]>
mm/khugepaged: fix GUP-fast interaction by sending IPI

Eric Dumazet <[email protected]>
once: add DO_ONCE_SLOW() for sleepable contexts

Ben Hutchings <[email protected]>
libtraceevent: Fix build with binutils 2.35

-------------

Diffstat:

 Documentation/driver-api/spi.rst                   |  4 +-
 Documentation/sphinx/load_config.py                |  6 +-
 Makefile                                           |  4 +-
 arch/alpha/kernel/entry.S                          |  4 +-
 arch/arm/boot/dts/armada-370.dtsi                  |  2 +-
 arch/arm/boot/dts/armada-375.dtsi                  |  2 +-
 arch/arm/boot/dts/armada-380.dtsi                  |  4 +-
 arch/arm/boot/dts/armada-385-turris-omnia.dts      | 18 ++++-
 arch/arm/boot/dts/armada-385.dtsi                  |  6 +-
 arch/arm/boot/dts/armada-39x.dtsi                  |  6 +-
 arch/arm/boot/dts/armada-xp-mv78230.dtsi           |  8 +--
 arch/arm/boot/dts/armada-xp-mv78260.dtsi           | 16 ++---
 arch/arm/boot/dts/dove.dtsi                        |  2 +-
 arch/arm/boot/dts/qcom-apq8064.dtsi                |  2 +-
 arch/arm/boot/dts/spear600.dtsi                    |  2 +-
 arch/arm/mach-mmp/time.c                           | 11 +--
 arch/arm/nwfpe/Makefile                            |  6 ++
 arch/arm64/boot/dts/mediatek/mt6797.dtsi           |  2 +-
 arch/mips/bcm63xx/clk.c                            |  2 +
 arch/mips/kernel/vpe-cmp.c                         |  4 +-
 arch/mips/kernel/vpe-mt.c                          |  4 +-
 arch/parisc/include/uapi/asm/mman.h                | 17 +++--
 arch/parisc/kernel/sys_parisc.c                    | 27 +++++++
 arch/parisc/kernel/syscall_table.S                 |  2 +-
 arch/powerpc/kernel/rtas.c                         | 20 ++++--
 arch/powerpc/perf/callchain.c                      |  1 +
 arch/powerpc/perf/hv-gpci-requests.h               |  4 ++
 arch/powerpc/perf/hv-gpci.c                        | 33 ++++++++-
 arch/powerpc/perf/hv-gpci.h                        |  1 +
 arch/powerpc/perf/req-gen/perf.h                   | 20 ++++++
 arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c      |  1 +
 arch/powerpc/platforms/83xx/mpc832x_rdb.c          |  2 +-
 arch/powerpc/sysdev/xive/spapr.c                   |  1 +
 arch/s390/include/asm/percpu.h                     |  2 +-
 arch/x86/boot/bioscall.S                           |  4 +-
 arch/x86/kernel/cpu/bugs.c                         |  2 +
 arch/x86/kernel/cpu/microcode/intel.c              |  8 +--
 arch/x86/kernel/uprobes.c                          |  4 +-
 arch/x86/xen/spinlock.c                            |  6 +-
 block/blk-mq-sysfs.c                               | 11 ++-
 block/partition-generic.c                          |  6 ++
 drivers/acpi/acpica/dsmethod.c                     | 10 ++-
 drivers/acpi/acpica/utcopy.c                       |  7 --
 drivers/base/class.c                               |  5 ++
 drivers/base/dd.c                                  |  8 ++-
 drivers/bluetooth/btusb.c                          |  6 +-
 drivers/bluetooth/hci_bcsp.c                       |  2 +-
 drivers/bluetooth/hci_h5.c                         |  2 +-
 drivers/bluetooth/hci_qca.c                        |  2 +-
 drivers/char/hw_random/amd-rng.c                   | 18 +++--
 drivers/char/hw_random/geode-rng.c                 | 36 +++++++---
 drivers/char/ipmi/ipmi_msghandler.c                |  8 ++-
 drivers/char/tpm/tpm_crb.c                         | 31 +++++---
 drivers/char/tpm/tpm_tis.c                         |  9 +--
 drivers/clk/rockchip/clk-pll.c                     |  1 +
 drivers/clk/samsung/clk-pll.c                      |  1 +
 drivers/clk/st/clkgen-fsyn.c                       |  5 +-
 drivers/cpuidle/dt_idle_states.c                   |  2 +-
 drivers/crypto/img-hash.c                          |  8 ++-
 drivers/crypto/n2_core.c                           |  6 ++
 drivers/dio/dio.c                                  |  8 +++
 drivers/edac/edac_device.c                         | 17 +++--
 drivers/edac/edac_module.h                         |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c           |  1 +
 drivers/gpu/drm/drm_connector.c                    |  3 +
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c          |  5 +-
 drivers/gpu/drm/radeon/radeon_bios.c               | 19 +++--
 drivers/gpu/drm/sti/sti_dvo.c                      |  7 +-
 drivers/gpu/drm/sti/sti_hda.c                      |  7 +-
 drivers/gpu/drm/sti/sti_hdmi.c                     |  7 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c                |  3 +-
 drivers/hid/hid-ids.h                              |  3 +
 drivers/hid/hid-plantronics.c                      |  9 +++
 drivers/hid/hid-sensor-custom.c                    |  2 +-
 drivers/hid/wacom_sys.c                            |  8 +++
 drivers/hid/wacom_wac.c                            |  4 ++
 drivers/hid/wacom_wac.h                            |  1 +
 drivers/hsi/controllers/omap_ssi_core.c            | 14 +++-
 drivers/i2c/busses/i2c-ismt.c                      |  3 +
 drivers/i2c/busses/i2c-pxa-pci.c                   | 10 +--
 drivers/iio/adc/ad_sigma_delta.c                   |  8 +--
 drivers/infiniband/hw/hfi1/affinity.c              |  2 +
 drivers/infiniband/hw/hfi1/firmware.c              |  6 ++
 drivers/infiniband/sw/rxe/rxe_qp.c                 |  6 +-
 drivers/infiniband/ulp/ipoib/ipoib_netlink.c       |  7 ++
 drivers/input/touchscreen/elants_i2c.c             |  9 +--
 drivers/iommu/amd_iommu_init.c                     |  7 ++
 drivers/iommu/amd_iommu_v2.c                       |  1 +
 drivers/iommu/fsl_pamu.c                           |  2 +-
 drivers/irqchip/irq-gic-pm.c                       |  2 +-
 drivers/isdn/hardware/mISDN/hfcmulti.c             | 19 +++--
 drivers/isdn/hardware/mISDN/hfcpci.c               | 13 ++--
 drivers/isdn/hardware/mISDN/hfcsusb.c              | 12 ++--
 drivers/macintosh/macio-adb.c                      |  4 ++
 drivers/macintosh/macio_asic.c                     |  2 +-
 drivers/mcb/mcb-core.c                             |  4 +-
 drivers/mcb/mcb-parse.c                            |  2 +-
 drivers/md/dm-cache-metadata.c                     | 54 ++++++++++++--
 drivers/md/dm-cache-target.c                       | 11 +--
 drivers/md/dm-thin-metadata.c                      |  9 +++
 drivers/md/dm-thin.c                               |  2 +
 drivers/md/md.c                                    |  9 ++-
 drivers/md/raid1.c                                 |  1 +
 drivers/media/dvb-core/dmxdev.c                    |  8 +++
 drivers/media/dvb-core/dvb_ca_en50221.c            |  2 +-
 drivers/media/dvb-core/dvb_frontend.c              |  2 +-
 drivers/media/dvb-core/dvbdev.c                    | 33 +++++++--
 drivers/media/dvb-core/dvbdev.h                    | 31 ++++----
 drivers/media/dvb-frontends/bcm3510.c              |  1 +
 drivers/media/dvb-frontends/stv0288.c              |  5 +-
 drivers/media/i2c/ad5820.c                         | 10 +--
 drivers/media/pci/saa7164/saa7164-core.c           |  4 +-
 drivers/media/pci/solo6x10/solo6x10-core.c         |  1 +
 drivers/media/platform/coda/coda-bit.c             | 14 ++--
 drivers/media/platform/exynos4-is/fimc-core.c      |  2 +-
 drivers/media/platform/exynos4-is/media-dev.c      |  6 +-
 .../media/platform/qcom/camss-8x16/camss-video.c   |  3 +-
 drivers/media/platform/s5p-mfc/s5p_mfc.c           | 17 ++++-
 .../media/platform/sti/c8sectpfe/c8sectpfe-core.c  |  1 +
 drivers/media/platform/vivid/vivid-vid-cap.c       |  1 +
 drivers/media/radio/si470x/radio-si470x-usb.c      |  4 +-
 drivers/media/rc/imon.c                            |  6 +-
 drivers/media/usb/dvb-usb/az6027.c                 |  4 ++
 drivers/media/usb/dvb-usb/dvb-usb-init.c           |  4 +-
 drivers/misc/cxl/guest.c                           | 24 ++++---
 drivers/misc/cxl/pci.c                             | 21 +++---
 drivers/misc/sgi-gru/grufault.c                    | 13 +++-
 drivers/misc/sgi-gru/grumain.c                     | 22 ++++--
 drivers/misc/sgi-gru/grutables.h                   |  2 +-
 drivers/misc/tifm_7xx1.c                           |  2 +-
 drivers/mmc/host/mmci.c                            |  4 +-
 drivers/mmc/host/moxart-mmc.c                      |  4 +-
 drivers/mmc/host/mxcmmc.c                          |  4 +-
 drivers/mmc/host/rtsx_usb_sdmmc.c                  | 11 ++-
 drivers/mmc/host/sdhci_f_sdh30.c                   |  3 +
 drivers/mmc/host/toshsd.c                          |  6 +-
 drivers/mmc/host/via-sdmmc.c                       |  4 +-
 drivers/mmc/host/vub300.c                          | 13 +++-
 drivers/mmc/host/wbsd.c                            | 12 +++-
 drivers/mmc/host/wmt-sdmmc.c                       |  6 +-
 drivers/mtd/lpddr/lpddr2_nvm.c                     |  2 +
 drivers/mtd/maps/pxa2xx-flash.c                    |  2 +
 drivers/mtd/mtdcore.c                              |  4 +-
 drivers/net/bonding/bond_main.c                    |  2 +-
 drivers/net/can/usb/mcba_usb.c                     | 10 ++-
 drivers/net/dsa/lan9303-core.c                     |  4 +-
 drivers/net/ethernet/amd/atarilance.c              |  2 +-
 drivers/net/ethernet/amd/lance.c                   |  2 +-
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c           |  3 +
 drivers/net/ethernet/amd/xgbe/xgbe-i2c.c           |  4 +-
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c          |  4 +-
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c        | 14 +---
 drivers/net/ethernet/apple/bmac.c                  |  2 +-
 drivers/net/ethernet/apple/mace.c                  |  2 +-
 drivers/net/ethernet/dnet.c                        |  4 +-
 drivers/net/ethernet/intel/igb/igb_main.c          | 10 ++-
 drivers/net/ethernet/myricom/myri10ge/myri10ge.c   |  1 +
 drivers/net/ethernet/neterion/s2io.c               |  2 +-
 .../ethernet/netronome/nfp/nfpcore/nfp_cppcore.c   |  3 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c  |  8 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h    | 10 +--
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c   |  8 ++-
 .../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c   |  2 +
 drivers/net/ethernet/rdc/r6040.c                   |  5 +-
 drivers/net/ethernet/renesas/ravb_main.c           |  2 +-
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c  |  3 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h   |  2 +-
 drivers/net/ethernet/ti/netcp_core.c               |  2 +-
 drivers/net/ethernet/xilinx/xilinx_emaclite.c      |  2 +-
 drivers/net/fddi/defxx.c                           | 22 ++++--
 drivers/net/hamradio/baycom_epp.c                  |  2 +-
 drivers/net/hamradio/scc.c                         |  6 +-
 drivers/net/loopback.c                             |  2 +-
 drivers/net/ntb_netdev.c                           |  4 +-
 drivers/net/phy/xilinx_gmii2rgmii.c                |  1 +
 drivers/net/ppp/ppp_generic.c                      |  2 +
 drivers/net/usb/rndis_host.c                       |  3 +-
 drivers/net/wan/farsync.c                          |  2 +
 drivers/net/wireless/ath/ar5523/ar5523.c           |  6 ++
 drivers/net/wireless/ath/ath10k/pci.c              | 20 +++---
 drivers/net/wireless/ath/ath9k/hif_usb.c           | 46 +++++++-----
 .../broadcom/brcm80211/brcmfmac/firmware.c         |  5 ++
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    |  2 +-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |  1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h   |  2 +-
 drivers/nfc/pn533/pn533.c                          |  4 ++
 drivers/nfc/pn533/usb.c                            | 44 +++++++++++-
 drivers/parisc/led.c                               |  3 +
 drivers/pci/irq.c                                  |  2 +
 drivers/pci/pci-sysfs.c                            | 13 ++--
 drivers/pci/pci.c                                  |  2 +
 drivers/pinctrl/pinconf-generic.c                  |  4 +-
 drivers/platform/x86/mxm-wmi.c                     |  8 +--
 drivers/platform/x86/sony-laptop.c                 | 21 ++++--
 drivers/pnp/core.c                                 |  4 +-
 drivers/power/avs/smartreflex.c                    |  1 +
 drivers/power/supply/power_supply_core.c           |  2 +-
 drivers/rapidio/devices/rio_mport_cdev.c           | 15 ++--
 drivers/rapidio/rio-scan.c                         |  8 ++-
 drivers/rapidio/rio.c                              |  9 ++-
 drivers/regulator/core.c                           |  2 +
 drivers/regulator/da9211-regulator.c               | 11 +--
 drivers/rtc/rtc-snvs.c                             | 16 ++++-
 drivers/rtc/rtc-st-lpc.c                           |  1 +
 drivers/s390/net/ctcm_main.c                       | 11 +--
 drivers/s390/net/lcs.c                             |  8 +--
 drivers/s390/net/netiucv.c                         |  9 +--
 drivers/scsi/fcoe/fcoe.c                           |  1 +
 drivers/scsi/fcoe/fcoe_sysfs.c                     | 19 ++---
 drivers/scsi/hpsa.c                                |  7 +-
 drivers/scsi/ipr.c                                 | 10 ++-
 drivers/scsi/snic/snic_disc.c                      |  3 +
 drivers/soc/ti/knav_qmss_queue.c                   |  2 +-
 drivers/soc/ux500/ux500-soc-id.c                   | 10 ++-
 drivers/staging/rtl8192e/rtllib_rx.c               |  2 +-
 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c  |  4 +-
 drivers/tty/hvc/hvc_xen.c                          | 46 +++++++-----
 drivers/tty/serial/amba-pl011.c                    |  3 +
 drivers/tty/serial/pch_uart.c                      |  4 ++
 drivers/tty/serial/sunsab.c                        |  8 ++-
 drivers/uio/uio_dmem_genirq.c                      | 13 ++--
 drivers/usb/common/ulpi.c                          |  2 +-
 drivers/usb/dwc3/core.c                            |  7 +-
 drivers/usb/gadget/function/f_uvc.c                |  5 +-
 drivers/usb/gadget/udc/fotg210-udc.c               | 12 ++--
 drivers/usb/musb/musb_gadget.c                     |  2 -
 drivers/usb/serial/cp210x.c                        |  2 +
 drivers/usb/serial/option.c                        |  3 +
 drivers/usb/storage/alauda.c                       |  2 +
 drivers/vfio/platform/vfio_platform_common.c       |  3 +-
 drivers/video/fbdev/Kconfig                        |  1 -
 drivers/video/fbdev/pm2fb.c                        |  9 ++-
 drivers/video/fbdev/uvesafb.c                      |  1 +
 drivers/video/fbdev/vermilion/vermilion.c          |  4 +-
 drivers/video/fbdev/via/via-core.c                 |  9 ++-
 drivers/vme/bridges/vme_fake.c                     |  2 +
 drivers/vme/bridges/vme_tsi148.c                   |  1 +
 fs/binfmt_misc.c                                   |  8 +--
 fs/char_dev.c                                      |  2 +-
 fs/cifs/connect.c                                  |  4 +-
 fs/ext4/ext4.h                                     |  2 +-
 fs/ext4/indirect.c                                 |  9 ++-
 fs/ext4/inode.c                                    | 18 ++++-
 fs/ext4/ioctl.c                                    | 10 +--
 fs/ext4/namei.c                                    |  3 +
 fs/ext4/xattr.c                                    | 15 ++--
 fs/hfs/inode.c                                     | 13 ++--
 fs/hfs/trans.c                                     |  2 +-
 fs/hfsplus/hfsplus_fs.h                            |  2 +
 fs/hfsplus/inode.c                                 | 16 ++---
 fs/hfsplus/options.c                               |  4 ++
 fs/jfs/jfs_dmap.c                                  | 27 +++++--
 fs/libfs.c                                         | 22 +++++-
 fs/nfs/nfs4proc.c                                  | 19 +++--
 fs/nfs/nfs4state.c                                 |  2 +
 fs/nfs/nfs4xdr.c                                   | 10 ++-
 fs/nfsd/nfs4callback.c                             |  4 +-
 fs/nfsd/nfs4xdr.c                                  | 11 +++
 fs/nilfs2/the_nilfs.c                              | 31 ++++++--
 fs/ocfs2/stackglue.c                               |  8 ++-
 fs/orangefs/orangefs-debugfs.c                     |  3 +
 fs/orangefs/orangefs-mod.c                         |  8 +--
 fs/pnode.c                                         |  2 +-
 fs/pstore/Kconfig                                  |  1 +
 fs/pstore/pmsg.c                                   |  7 +-
 fs/pstore/ram.c                                    |  2 +
 fs/pstore/ram_core.c                               |  6 +-
 fs/reiserfs/namei.c                                |  4 ++
 fs/reiserfs/xattr_security.c                       |  2 +-
 fs/sysv/itree.c                                    |  2 +-
 fs/udf/balloc.c                                    |  5 +-
 fs/udf/inode.c                                     | 84 ++++++++++------------
 fs/udf/namei.c                                     |  8 +--
 fs/udf/truncate.c                                  | 48 ++++---------
 fs/udf/udfdecl.h                                   |  3 +-
 fs/xattr.c                                         |  2 +-
 include/asm-generic/tlb.h                          |  6 ++
 include/linux/can/platform/sja1000.h               |  2 +-
 include/linux/eventfd.h                            |  2 +-
 include/linux/fs.h                                 | 12 +++-
 include/linux/once.h                               | 28 ++++++++
 include/linux/sunrpc/rpc_pipe_fs.h                 |  5 ++
 include/linux/timerqueue.h                         |  2 +-
 include/net/mrp.h                                  |  1 +
 include/uapi/linux/swab.h                          |  2 +-
 include/uapi/sound/asequencer.h                    |  8 +--
 kernel/acct.c                                      |  2 +
 kernel/events/core.c                               |  8 ++-
 kernel/gcov/gcc_4_7.c                              |  5 ++
 kernel/power/snapshot.c                            |  4 +-
 kernel/trace/blktrace.c                            |  3 +-
 kernel/trace/trace.c                               | 15 +++-
 lib/notifier-error-inject.c                        |  2 +-
 lib/once.c                                         | 30 ++++++++
 lib/test_firmware.c                                |  1 +
 mm/khugepaged.c                                    | 24 ++++++-
 mm/memory.c                                        |  5 ++
 net/802/mrp.c                                      | 18 +++--
 net/bluetooth/hci_core.c                           |  2 +-
 net/bluetooth/l2cap_core.c                         |  3 +-
 net/bluetooth/rfcomm/core.c                        |  2 +-
 net/caif/cfctrl.c                                  |  6 +-
 net/core/filter.c                                  | 11 ++-
 net/core/skbuff.c                                  |  3 +
 net/core/stream.c                                  |  6 ++
 net/ipv4/inet_connection_sock.c                    | 16 ++++-
 net/ipv4/inet_hashtables.c                         |  4 +-
 net/ipv4/udp_tunnel.c                              |  1 +
 net/ipv6/raw.c                                     |  4 ++
 net/mac80211/iface.c                               |  1 +
 net/netfilter/ipset/ip_set_bitmap_ip.c             |  4 +-
 net/nfc/netlink.c                                  | 52 ++++++++++----
 net/openvswitch/datapath.c                         | 25 ++++---
 net/sched/ematch.c                                 |  2 +
 net/sched/sch_api.c                                | 10 ++-
 net/sched/sch_atm.c                                |  5 +-
 net/sunrpc/auth_gss/auth_gss.c                     | 19 ++++-
 net/sunrpc/clnt.c                                  |  2 +-
 net/vmw_vsock/vmci_transport.c                     |  6 +-
 security/apparmor/apparmorfs.c                     |  4 +-
 security/device_cgroup.c                           | 33 +++++++--
 security/integrity/ima/ima_template.c              |  9 ++-
 sound/core/control_compat.c                        |  4 ++
 sound/drivers/mts64.c                              |  3 +
 sound/pci/asihpi/hpioctl.c                         |  2 +-
 sound/soc/codecs/pcm512x.c                         |  8 +--
 sound/soc/codecs/rt298.c                           |  7 ++
 sound/soc/codecs/rt5670.c                          |  2 -
 sound/soc/codecs/wm8994.c                          |  5 ++
 sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c   |  7 +-
 sound/soc/pxa/mmp-pcm.c                            |  2 +-
 sound/soc/rockchip/rockchip_pdm.c                  |  1 +
 sound/soc/rockchip/rockchip_spdif.c                |  1 +
 sound/soc/soc-ops.c                                |  9 ++-
 sound/usb/line6/driver.c                           |  3 +-
 sound/usb/line6/midi.c                             |  6 +-
 sound/usb/line6/midibuf.c                          | 25 ++++---
 sound/usb/line6/midibuf.h                          |  5 +-
 sound/usb/line6/pod.c                              |  3 +-
 tools/arch/parisc/include/uapi/asm/mman.h          | 12 ++--
 tools/lib/traceevent/Makefile                      |  2 +-
 tools/perf/bench/bench.h                           | 12 ----
 tools/perf/tests/attr.py                           |  1 -
 tools/perf/util/auxtrace.c                         |  2 +-
 tools/testing/ktest/ktest.pl                       |  3 +-
 tools/testing/selftests/lib.mk                     |  5 ++
 .../selftests/powerpc/dscr/dscr_sysfs_test.c       |  5 +-
 347 files changed, 1914 insertions(+), 796 deletions(-)
author maintainer
#1 lore raw

PATCH 1/338 libtraceevent: Fix build with binutils 2.35

From: Ben Hutchings <[email protected]>

commit 39efdd94e314336f4acbac4c07e0f37bdc3bef71 upstream.

In binutils 2.35, 'nm -D' changed to show symbol versions along with symbol names, with the usual @@ separator. When generating libtraceevent-dynamic-list we need just the names, so strip off the version suffix if present.

---
 tools/lib/traceevent/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/lib/traceevent/Makefile +1 -1
@@ -263,7 +263,7 @@ define do_generate_dynamic_list_file
 	xargs echo "U w W" | tr 'w ' 'W\n' | sort -u | xargs echo`;\
 	if [ "$$symbol_type" = "U W" ];then				\
 		(echo '{';						\
-		$(NM) -u -D $1 | awk 'NF>1 {print "\t"$$2";"}' | sort -u;\
+		$(NM) -u -D $1 | awk 'NF>1 {sub("@.*", "", $$2); print "\t"$$2";"}' | sort -u;\
 		echo '};';						\
 		) > $2;							\
 	else								\
author maintainer
#2 lore raw

PATCH 2/338 once: add DO_ONCE_SLOW() for sleepable contexts

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

commit 62c07983bef9d3e78e71189441e1a470f0d1e653 upstream.

Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.

This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")

get_random_once() uses DO_ONCE(), which block hard irqs for the duration of the operation.

This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock for operations where we prefer to stay in process context.

Then __inet_hash_connect() can use get_random_slow_once() to populate its perturbation table.

Fixes 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16")
Fixes 190cc82489f4 ("tcp: change source port randomizarion at connect() time")
Cc Willy Tarreau <[email protected]>
---
 include/linux/once.h       |   28 ++++++++++++++++++++++++++++
 lib/once.c                 |   30 ++++++++++++++++++++++++++++++
 net/ipv4/inet_hashtables.c |    4 ++--
 3 files changed, 60 insertions(+), 2 deletions(-)
include/linux/once.h +28 -0
@@ -5,10 +5,18 @@
 #include <linux/types.h>
 #include <linux/jump_label.h>
 
+/* Helpers used from arbitrary contexts.
+ * Hard irqs are blocked, be cautious.
+ */
 bool __do_once_start(bool *done, unsigned long *flags);
 void __do_once_done(bool *done, struct static_key *once_key,
 		    unsigned long *flags);
 
+/* Variant for process contexts only. */
+bool __do_once_slow_start(bool *done);
+void __do_once_slow_done(bool *done, struct static_key *once_key,
+			 struct module *mod);
+
 /* Call a function exactly once. The idea of DO_ONCE() is to perform
  * a function call such as initialization of random seeds, etc, only
  * once, where DO_ONCE() can live in the fast-path. After @func has
@@ -52,9 +60,29 @@ void __do_once_done(bool *done, struct s
 		___ret;							     \
 	})
 
+/* Variant of DO_ONCE() for process/sleepable contexts. */
+#define DO_ONCE_SLOW(func, ...)						     \
+	({								     \
+		bool ___ret = false;					     \
+		static bool ___done = false;				     \
+		static struct static_key ___once_key = STATIC_KEY_INIT_TRUE; \
+		if (static_key_true(&___once_key)) {		     \
+			___ret = __do_once_slow_start(&___done);	     \
+			if (unlikely(___ret)) {				     \
+				func(__VA_ARGS__);			     \
+				__do_once_slow_done(&___done, &___once_key,  \
+						    THIS_MODULE);	     \
+			}						     \
+		}							     \
+		___ret;							     \
+	})
+
 #define get_random_once(buf, nbytes)					     \
 	DO_ONCE(get_random_bytes, (buf), (nbytes))
 #define get_random_once_wait(buf, nbytes)                                    \
 	DO_ONCE(get_random_bytes_wait, (buf), (nbytes))                      \
 
+#define get_random_slow_once(buf, nbytes)				     \
+	DO_ONCE_SLOW(get_random_bytes, (buf), (nbytes))
+
 #endif /* _LINUX_ONCE_H */
lib/once.c +30 -0
@@ -61,3 +61,33 @@ void __do_once_done(bool *done, struct s
 	once_disable_jump(once_key);
 }
 EXPORT_SYMBOL(__do_once_done);
+
+static DEFINE_MUTEX(once_mutex);
+
+bool __do_once_slow_start(bool *done)
+	__acquires(once_mutex)
+{
+	mutex_lock(&once_mutex);
+	if (*done) {
+		mutex_unlock(&once_mutex);
+		/* Keep sparse happy by restoring an even lock count on
+		 * this mutex. In case we return here, we don't call into
+		 * __do_once_done but return early in the DO_ONCE_SLOW() macro.
+		 */
+		__acquire(once_mutex);
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(__do_once_slow_start);
+
+void __do_once_slow_done(bool *done, struct static_key *once_key,
+			 struct module *mod)
+	__releases(once_mutex)
+{
+	*done = true;
+	mutex_unlock(&once_mutex);
+	once_disable_jump(once_key);
+}
+EXPORT_SYMBOL(__do_once_slow_done);
net/ipv4/inet_hashtables.c +2 -2
@@ -638,8 +638,8 @@ int __inet_hash_connect(struct inet_time
 	if (likely(remaining > 1))
 		remaining &= ~1U;
 
-	net_get_random_once(table_perturb,
-			    INET_TABLE_PERTURB_SIZE * sizeof(*table_perturb));
+	get_random_slow_once(table_perturb,
+			     INET_TABLE_PERTURB_SIZE * sizeof(*table_perturb));
 	index = port_offset & (INET_TABLE_PERTURB_SIZE - 1);
 
 	offset = READ_ONCE(table_perturb[index]) + (port_offset >> 32);
author maintainer
#3 lore raw

PATCH 3/338 mm/khugepaged: fix GUP-fast interaction by sending IPI

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

commit 2ba99c5e08812494bc57f319fb562f527d9bacd8 upstream.

Since commit 70cbc3cc78a99 ("mm: gup: fix the fast GUP race against THP collapse"), the lockless_pages_from_mm() fastpath rechecks the pmd_t to ensure that the page table was not removed by khugepaged in between.

However, lockless_pages_from_mm() still requires that the page table is not concurrently freed. Fix it by sending IPIs (if the architecture uses semi-RCU-style page table freeing) before freeing/reusing page tables.

[manual backport: two of the three places in khugepaged that can free ptes were refactored into a common helper between 5.15 and 6.0; TLB flushing was refactored between 5.4 and 5.10;
TLB flushing was refactored between 4.19 and 5.4;
pmd collapse for PTE-mapped THP was only added in 5.4; ugly hack for s390 in <=4.19 and arm]

---
 include/asm-generic/tlb.h |    6 ++++++
 mm/khugepaged.c           |   15 +++++++++++++++
 mm/memory.c               |    5 +++++
 3 files changed, 26 insertions(+)
include/asm-generic/tlb.h +6 -0
@@ -60,6 +60,12 @@ struct mmu_table_batch {
 extern void tlb_table_flush(struct mmu_gather *tlb);
 extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
 
+void tlb_remove_table_sync_one(void);
+
+#else
+
+static inline void tlb_remove_table_sync_one(void) { }
+
 #endif
 
 /*
mm/khugepaged.c +15 -0
@@ -23,6 +23,19 @@
 #include <asm/pgalloc.h>
 #include "internal.h"
 
+/* gross hack for <=4.19 stable */
+#if defined(CONFIG_S390) || defined(CONFIG_ARM)
+static void tlb_remove_table_smp_sync(void *arg)
+{
+        /* Simply deliver the interrupt */
+}
+
+static void tlb_remove_table_sync_one(void)
+{
+        smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
+}
+#endif
+
 enum scan_result {
 	SCAN_FAIL,
 	SCAN_SUCCEED,
@@ -1046,6 +1059,7 @@ static void collapse_huge_page(struct mm
 	_pmd = pmdp_collapse_flush(vma, address, pmd);
 	spin_unlock(pmd_ptl);
 	mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
+	tlb_remove_table_sync_one();
 
 	spin_lock(pte_ptl);
 	isolated = __collapse_huge_page_isolate(vma, address, pte);
@@ -1295,6 +1309,7 @@ static void retract_page_tables(struct a
 				_pmd = pmdp_collapse_flush(vma, addr, pmd);
 				spin_unlock(ptl);
 				atomic_long_dec(&mm->nr_ptes);
+				tlb_remove_table_sync_one();
 				pte_free(mm, pmd_pgtable(_pmd));
 			}
 			up_write(&mm->mmap_sem);
mm/memory.c +5 -0
@@ -373,6 +373,11 @@ static void tlb_remove_table_smp_sync(vo
 	/* Simply deliver the interrupt */
 }
 
+void tlb_remove_table_sync_one(void)
+{
+	smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
+}
+
 static void tlb_remove_table_one(void *table)
 {
 	/*
author maintainer
#4 lore raw

PATCH 4/338 mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

commit f268f6cf875f3220afc77bdd0bf1bb136eb54db9 upstream.

Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free.

I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged:
enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

[manual backport: this code was refactored from two copies into a common helper between 5.15 and 6.0;
pmd collapse for PTE-mapped THP was only added in 5.4;
MMU notifier API changed between 4.19 and 5.4]

---
 mm/khugepaged.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
mm/khugepaged.c +8 -1
@@ -1304,13 +1304,20 @@ static void retract_page_tables(struct a
 		 */
 		if (down_write_trylock(&mm->mmap_sem)) {
 			if (!khugepaged_test_exit(mm)) {
-				spinlock_t *ptl = pmd_lock(mm, pmd);
+				spinlock_t *ptl;
+				unsigned long end = addr + HPAGE_PMD_SIZE;
+
+				mmu_notifier_invalidate_range_start(mm, addr,
+								    end);
+				ptl = pmd_lock(mm, pmd);
 				/* assume page table is clear */
 				_pmd = pmdp_collapse_flush(vma, addr, pmd);
 				spin_unlock(ptl);
 				atomic_long_dec(&mm->nr_ptes);
 				tlb_remove_table_sync_one();
 				pte_free(mm, pmd_pgtable(_pmd));
+				mmu_notifier_invalidate_range_end(mm, addr,
+								  end);
 			}
 			up_write(&mm->mmap_sem);
 		}
author maintainer
#5 lore raw

PATCH 5/338 block: unhash blkdev part inode when the part is deleted

In reply to Greg Kroah-Hartman

From: Ming Lei <[email protected]>

v5.11 changes the blkdev lookup mechanism completely since commit 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get"), and small part of the change is to unhash part bdev inode when deleting partition. Turns out this kind of change does fix one nasty issue in case of BLOCK_EXT_MAJOR:

1) when one partition is deleted & closed, disk_put_part() is always called before bdput(bdev), see blkdev_put(); so the part's devt can be freed & re-used before the inode is dropped

2) then new partition with same devt can be created just before the inode in 1) is dropped, then the old inode/bdev structurein 1) is re-used for this new partition, this way causes use-after-free and kernel panic.

It isn't possible to backport the whole big patchset of "merge struct block_device and struct hd_struct v4" for addressing this issue.

https://lore.kernel.org/linux-block/[email protected]/

So fixes it by unhashing part bdev in delete_partition(), and this way is actually aligned with v5.11+'s behavior.

Backported from the following 5.10.y commit:

5f2f77560591 ("block: unhash blkdev part inode when the part is deleted")

---
 block/partition-generic.c |    6 ++++++
 1 file changed, 6 insertions(+)
block/partition-generic.c +6 -0
@@ -270,6 +270,7 @@ void delete_partition(struct gendisk *di
 	struct disk_part_tbl *ptbl =
 		rcu_dereference_protected(disk->part_tbl, 1);
 	struct hd_struct *part;
+	struct block_device *bdev;
 
 	if (partno >= ptbl->len)
 		return;
@@ -283,6 +284,11 @@ void delete_partition(struct gendisk *di
 	kobject_put(part->holder_dir);
 	device_del(part_to_dev(part));
 
+	bdev = bdget(part_devt(part));
+	if (bdev) {
+		remove_inode_hash(bdev->bd_inode);
+		bdput(bdev);
+	}
 	hd_struct_kill(part);
 }
 
author maintainer
#6 lore raw

PATCH 6/338 nfp: fix use-after-free in area_cache_get()

In reply to Greg Kroah-Hartman

From: Jialiang Wang <[email protected]>

commit 02e1a114fdb71e59ee6770294166c30d437bf86a upstream.

area_cache_get() is used to distribute cache->area and set cache->id,
and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and
nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device
equipped with specified configuration.

 BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
  Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

 Call Trace:
  <TASK>
 nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

 Allocated by task 1:
 nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
 nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
 nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
 nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
 nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

 Freed by task 1:
 kfree (mm/slub.c:4562)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
 nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
 nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)
---
 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c +2 -1
@@ -858,7 +858,6 @@ area_cache_get(struct nfp_cpp *cpp, u32
 	}
 
 	/* Adjust the start address to be cache size aligned */
-	cache->id = id;
 	cache->addr = addr & ~(u64)(cache->size - 1);
 
 	/* Re-init to the new ID and address */
@@ -878,6 +877,8 @@ area_cache_get(struct nfp_cpp *cpp, u32
 		return NULL;
 	}
 
+	cache->id = id;
+
 exit:
 	/* Adjust offset */
 	*offset = addr - cache->addr;
author maintainer
#7 lore raw

PATCH 7/338 ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()

In reply to Greg Kroah-Hartman

From: Mark Brown <[email protected]>

[ Upstream commit 97eea946b93961fffd29448dcda7398d0d51c4b2 ]

The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks.

---
 sound/soc/soc-ops.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/soc-ops.c +6 -0
index b734bf911470..3f9db4102f38 100644
@@ -465,6 +465,12 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol,
 	if (snd_soc_volsw_is_stereo(mc)) {
 		val_mask = mask << rshift;
 		val2 = (ucontrol->value.integer.value[1] + min) & mask;
+
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max)
+			return -EINVAL;
+
 		val2 = val2 << rshift;
 
 		err = snd_soc_component_update_bits(component, reg2, val_mask,
Signature · 1 line
2.35.1
author maintainer
#8 lore raw

PATCH 8/338 can: sja1000: fix size of OCR_MODE_MASK define

In reply to Greg Kroah-Hartman

From: Heiko Schocher <[email protected]>

[ Upstream commit 26e8f6a75248247982458e8237b98c9fb2ffcf9d ]

bitfield mode in ocr register has only 2 bits not 3, so correct the OCR_MODE_MASK define.

---
 include/linux/can/platform/sja1000.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/can/platform/sja1000.h +1 -1
index 5755ae5a4712..6a869682c120 100644
@@ -14,7 +14,7 @@
 #define OCR_MODE_TEST     0x01
 #define OCR_MODE_NORMAL   0x02
 #define OCR_MODE_CLOCK    0x03
-#define OCR_MODE_MASK     0x07
+#define OCR_MODE_MASK     0x03
 #define OCR_TX0_INVERT    0x04
 #define OCR_TX0_PULLDOWN  0x08
 #define OCR_TX0_PULLUP    0x10
Signature · 1 line
2.35.1
author maintainer
#9 lore raw

PATCH 9/338 can: mcba_usb: Fix termination command argument

In reply to Greg Kroah-Hartman

From: Yasushi SHOJI <[email protected]>

[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ]

Microchip USB Analyzer can activate the internal termination resistors by setting the "termination" option ON, or OFF to to deactivate them. As I've observed, both with my oscilloscope and captured USB packets below, you must send "0" to turn it ON, and "1" to turn it OFF.

Quoted 1 line

From the schematics in the user's guide, I can confirm that you must

drive the CAN_RES signal LOW "0" to activate the resistors.

Reverse the argument value of usb_msg.termination to fix this.

These are the two commands sequence, ON then OFF.

Quoted 7 lines
No.     Time           Source                Destination           Protocol Length Info
      1 0.000000       host                  1.3.1                 USB      46     URB_BULK out

Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) USB URB
Leftover Capture Data: a80000000000000000000000000000000000a8

Quoted 6 lines
No.     Time           Source                Destination           Protocol Length Info
      2 4.372547       host                  1.3.1                 USB      46     URB_BULK out

Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) USB URB
Leftover Capture Data: a80100000000000000000000000000000000a9

---
 drivers/net/can/usb/mcba_usb.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/net/can/usb/mcba_usb.c +7 -3
index f7c3fc3dabfe..01ef5cabdc11 100644
@@ -58,6 +58,10 @@
 #define MCBA_VER_REQ_USB 1
 #define MCBA_VER_REQ_CAN 2
 
+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */
+#define MCBA_VER_TERMINATION_ON 0
+#define MCBA_VER_TERMINATION_OFF 1
+
 #define MCBA_SIDL_EXID_MASK 0x8
 #define MCBA_DLC_MASK 0xf
 #define MCBA_DLC_RTR_MASK 0x40
@@ -480,7 +484,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
 		priv->usb_ka_first_pass = false;
 	}
 
-	if (msg->termination_state)
+	if (msg->termination_state == MCBA_VER_TERMINATION_ON)
 		priv->can.termination = MCBA_TERMINATION_ENABLED;
 	else
 		priv->can.termination = MCBA_TERMINATION_DISABLED;
@@ -800,9 +804,9 @@ static int mcba_set_termination(struct net_device *netdev, u16 term)
 	};
 
 	if (term == MCBA_TERMINATION_ENABLED)
-		usb_msg.termination = 1;
+		usb_msg.termination = MCBA_VER_TERMINATION_ON;
 	else
-		usb_msg.termination = 0;
+		usb_msg.termination = MCBA_VER_TERMINATION_OFF;
 
 	mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
 
Signature · 1 line
2.35.1
author maintainer
#10 lore raw

PATCH 10/338 ASoC: ops: Correct bounds check for second channel on SX controls

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

commit f33bcc506050f89433a52a3052054d4ebd37b1c1 upstream.

Currently the check against the max value for the control is being applied after the value has had the minimum applied and been masked. But the max value simply indicates the number of volume levels on an SX control, and as such should just be applied on the raw value.

Fixes 97eea946b939 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()")
---
 sound/soc/soc-ops.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/soc/soc-ops.c +3 -2
@@ -463,14 +463,15 @@ int snd_soc_put_volsw_sx(struct snd_kcon
 		return err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
-		val_mask = mask << rshift;
-		val2 = (ucontrol->value.integer.value[1] + min) & mask;
+		val2 = ucontrol->value.integer.value[1];
 
 		if (mc->platform_max && val2 > mc->platform_max)
 			return -EINVAL;
 		if (val2 > max)
 			return -EINVAL;
 
+		val_mask = mask << rshift;
+		val2 = (val2 + min) & mask;
 		val2 = val2 << rshift;
 
 		err = snd_soc_component_update_bits(component, reg2, val_mask,
author maintainer
#11 lore raw

PATCH 11/338 perf script python: Remove explicit shebang from tests/attr.c

In reply to Greg Kroah-Hartman

From: Tony Jones <[email protected]>

commit d72eadbc1d2866fc047edd4535ffb0298fe240be upstream.

tests/attr.c invokes attr.py via an explicit invocation of Python ($PYTHON) so there is therefore no need for an explicit shebang.

Also most distros follow pep-0394 which recommends that /usr/bin/python refer only to v2 and so may not exist on the system (if PYTHON=python3).

---
 tools/perf/tests/attr.py |    1 -
 1 file changed, 1 deletion(-)
tools/perf/tests/attr.py +0 -1
@@ -1,4 +1,3 @@
-#! /usr/bin/env python
 # SPDX-License-Identifier: GPL-2.0
 
 import os
author maintainer
#12 lore raw

PATCH 12/338 udf: Discard preallocation before extending file with a hole

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit 16d0556568148bdcaa45d077cac9f8f7077cf70a upstream.

When extending file with a hole, we tried to preserve existing preallocation for the file. However that is not very useful and complicates code because the previous extent may need to be rounded to block boundary as well (which we forgot to do thus causing data corruption for sequence like:

xfs_io -f -c "pwrite 0x75e63 11008" -c "truncate 0x7b24b" \
-c "truncate 0xabaa3" -c "pwrite 0xac70b 22954" \
-c "pwrite 0x93a43 11358" -c "pwrite 0xb8e65 52211" file

with 512-byte block size. Just discard preallocation before extending file to simplify things and also fix this data corruption.

---
 fs/udf/inode.c |   46 ++++++++++++++++++----------------------------
 1 file changed, 18 insertions(+), 28 deletions(-)
fs/udf/inode.c +18 -28
@@ -434,6 +434,12 @@ static int udf_get_block(struct inode *i
 		iinfo->i_next_alloc_goal++;
 	}
 
+	/*
+	 * Block beyond EOF and prealloc extents? Just discard preallocation
+	 * as it is not useful and complicates things.
+	 */
+	if (((loff_t)block) << inode->i_blkbits > iinfo->i_lenExtents)
+		udf_discard_prealloc(inode);
 	udf_clear_extent_cache(inode);
 	phys = inode_getblk(inode, block, &err, &new);
 	if (!phys)
@@ -483,8 +489,6 @@ static int udf_do_extend_file(struct ino
 	uint32_t add;
 	int count = 0, fake = !(last_ext->extLength & UDF_EXTENT_LENGTH_MASK);
 	struct super_block *sb = inode->i_sb;
-	struct kernel_lb_addr prealloc_loc = {};
-	int prealloc_len = 0;
 	struct udf_inode_info *iinfo;
 	int err;
 
@@ -505,19 +509,6 @@ static int udf_do_extend_file(struct ino
 			~(sb->s_blocksize - 1);
 	}
 
-	/* Last extent are just preallocated blocks? */
-	if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) ==
-						EXT_NOT_RECORDED_ALLOCATED) {
-		/* Save the extent so that we can reattach it to the end */
-		prealloc_loc = last_ext->extLocation;
-		prealloc_len = last_ext->extLength;
-		/* Mark the extent as a hole */
-		last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
-			(last_ext->extLength & UDF_EXTENT_LENGTH_MASK);
-		last_ext->extLocation.logicalBlockNum = 0;
-		last_ext->extLocation.partitionReferenceNum = 0;
-	}
-
 	/* Can we merge with the previous extent? */
 	if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) ==
 					EXT_NOT_RECORDED_NOT_ALLOCATED) {
@@ -545,7 +536,7 @@ static int udf_do_extend_file(struct ino
 		 * more extents, we may need to enter possible following
 		 * empty indirect extent.
 		 */
-		if (new_block_bytes || prealloc_len)
+		if (new_block_bytes)
 			udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
 	}
 
@@ -579,17 +570,6 @@ static int udf_do_extend_file(struct ino
 	}
 
 out:
-	/* Do we have some preallocated blocks saved? */
-	if (prealloc_len) {
-		err = udf_add_aext(inode, last_pos, &prealloc_loc,
-				   prealloc_len, 1);
-		if (err)
-			return err;
-		last_ext->extLocation = prealloc_loc;
-		last_ext->extLength = prealloc_len;
-		count++;
-	}
-
 	/* last_pos should point to the last written extent... */
 	if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
 		last_pos->offset -= sizeof(struct short_ad);
@@ -642,8 +622,17 @@ static int udf_extend_file(struct inode
 	else
 		BUG();
 
+	/*
+	 * When creating hole in file, just don't bother with preserving
+	 * preallocation. It likely won't be very useful anyway.
+	 */
+	udf_discard_prealloc(inode);
+
 	etype = inode_bmap(inode, first_block, &epos, &eloc, &elen, &offset);
 	within_final_block = (etype != -1);
+	/* We don't expect extents past EOF... */
+	WARN_ON_ONCE(etype != -1 &&
+		     elen > ((loff_t)offset + 1) << inode->i_blkbits);
 
 	if ((!epos.bh && epos.offset == udf_file_entry_alloc_offset(inode)) ||
 	    (epos.bh && epos.offset == sizeof(struct allocExtDesc))) {
@@ -772,10 +761,11 @@ static sector_t inode_getblk(struct inod
 		goto out_free;
 	}
 
-	/* Are we beyond EOF? */
+	/* Are we beyond EOF and preallocated extent? */
 	if (etype == -1) {
 		int ret;
 		loff_t hole_len;
+
 		isBeyondEOF = true;
 		if (count) {
 			if (c)
author maintainer
#13 lore raw

PATCH 13/338 udf: Drop unused arguments of udf_delete_aext()

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit 6c1e4d06a3808dc67dbce2d631f4c12574567dd5 upstream.

udf_delete_aext() uses its last two arguments only as local variables. Drop them.

---
 fs/udf/balloc.c  |    5 ++---
 fs/udf/inode.c   |    8 ++++----
 fs/udf/udfdecl.h |    3 +--
 3 files changed, 7 insertions(+), 9 deletions(-)
fs/udf/balloc.c +2 -3
@@ -531,8 +531,7 @@ static int udf_table_prealloc_blocks(str
 			udf_write_aext(table, &epos, &eloc,
 					(etype << 30) | elen, 1);
 		} else
-			udf_delete_aext(table, epos, eloc,
-					(etype << 30) | elen);
+			udf_delete_aext(table, epos);
 	} else {
 		alloc_count = 0;
 	}
@@ -627,7 +626,7 @@ static int udf_table_new_block(struct su
 	if (goal_elen)
 		udf_write_aext(table, &goal_epos, &goal_eloc, goal_elen, 1);
 	else
-		udf_delete_aext(table, goal_epos, goal_eloc, goal_elen);
+		udf_delete_aext(table, goal_epos);
 	brelse(goal_epos.bh);
 
 	udf_add_free_space(sb, partition, -1);
fs/udf/inode.c +4 -4
@@ -1169,8 +1169,7 @@ static void udf_update_extents(struct in
 
 	if (startnum > endnum) {
 		for (i = 0; i < (startnum - endnum); i++)
-			udf_delete_aext(inode, *epos, laarr[i].extLocation,
-					laarr[i].extLength);
+			udf_delete_aext(inode, *epos);
 	} else if (startnum < endnum) {
 		for (i = 0; i < (endnum - startnum); i++) {
 			udf_insert_aext(inode, *epos, laarr[i].extLocation,
@@ -2202,14 +2201,15 @@ static int8_t udf_insert_aext(struct ino
 	return (nelen >> 30);
 }
 
-int8_t udf_delete_aext(struct inode *inode, struct extent_position epos,
-		       struct kernel_lb_addr eloc, uint32_t elen)
+int8_t udf_delete_aext(struct inode *inode, struct extent_position epos)
 {
 	struct extent_position oepos;
 	int adsize;
 	int8_t etype;
 	struct allocExtDesc *aed;
 	struct udf_inode_info *iinfo;
+	struct kernel_lb_addr eloc;
+	uint32_t elen;
 
 	if (epos.bh) {
 		get_bh(epos.bh);
fs/udf/udfdecl.h +1 -2
@@ -161,8 +161,7 @@ extern int udf_add_aext(struct inode *,
 			struct kernel_lb_addr *, uint32_t, int);
 extern void udf_write_aext(struct inode *, struct extent_position *,
 			   struct kernel_lb_addr *, uint32_t, int);
-extern int8_t udf_delete_aext(struct inode *, struct extent_position,
-			      struct kernel_lb_addr, uint32_t);
+extern int8_t udf_delete_aext(struct inode *, struct extent_position);
 extern int8_t udf_next_aext(struct inode *, struct extent_position *,
 			    struct kernel_lb_addr *, uint32_t *, int);
 extern int8_t udf_current_aext(struct inode *, struct extent_position *,
author maintainer
#14 lore raw

PATCH 14/338 udf: Fix preallocation discarding at indirect extent boundary

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit cfe4c1b25dd6d2f056afc00b7c98bcb3dd0b1fc3 upstream.

When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication.

---
 fs/udf/truncate.c |   45 +++++++++++++--------------------------------
 1 file changed, 13 insertions(+), 32 deletions(-)
fs/udf/truncate.c +13 -32
@@ -120,60 +120,41 @@ void udf_truncate_tail_extent(struct ino
 
 void udf_discard_prealloc(struct inode *inode)
 {
-	struct extent_position epos = { NULL, 0, {0, 0} };
+	struct extent_position epos = {};
+	struct extent_position prev_epos = {};
 	struct kernel_lb_addr eloc;
 	uint32_t elen;
 	uint64_t lbcount = 0;
 	int8_t etype = -1, netype;
-	int adsize;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 
 	if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB ||
 	    inode->i_size == iinfo->i_lenExtents)
 		return;
 
-	if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
-		adsize = sizeof(struct short_ad);
-	else if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
-		adsize = sizeof(struct long_ad);
-	else
-		adsize = 0;
-
 	epos.block = iinfo->i_location;
 
 	/* Find the last extent in the file */
-	while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 1)) != -1) {
-		etype = netype;
+	while ((netype = udf_next_aext(inode, &epos, &eloc, &elen, 0)) != -1) {
+		brelse(prev_epos.bh);
+		prev_epos = epos;
+		if (prev_epos.bh)
+			get_bh(prev_epos.bh);
+
+		etype = udf_next_aext(inode, &epos, &eloc, &elen, 1);
 		lbcount += elen;
 	}
 	if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30)) {
-		epos.offset -= adsize;
 		lbcount -= elen;
-		extent_trunc(inode, &epos, &eloc, etype, elen, 0);
-		if (!epos.bh) {
-			iinfo->i_lenAlloc =
-				epos.offset -
-				udf_file_entry_alloc_offset(inode);
-			mark_inode_dirty(inode);
-		} else {
-			struct allocExtDesc *aed =
-				(struct allocExtDesc *)(epos.bh->b_data);
-			aed->lengthAllocDescs =
-				cpu_to_le32(epos.offset -
-					    sizeof(struct allocExtDesc));
-			if (!UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_STRICT) ||
-			    UDF_SB(inode->i_sb)->s_udfrev >= 0x0201)
-				udf_update_tag(epos.bh->b_data, epos.offset);
-			else
-				udf_update_tag(epos.bh->b_data,
-					       sizeof(struct allocExtDesc));
-			mark_buffer_dirty_inode(epos.bh, inode);
-		}
+		udf_delete_aext(inode, prev_epos);
+		udf_free_blocks(inode->i_sb, inode, &eloc, 0,
+				DIV_ROUND_UP(elen, 1 << inode->i_blkbits));
 	}
 	/* This inode entry is in-memory only and thus we don't have to mark
 	 * the inode dirty */
 	iinfo->i_lenExtents = lbcount;
 	brelse(epos.bh);
+	brelse(prev_epos.bh);
 }
 
 static void udf_update_alloc_ext_desc(struct inode *inode,
author maintainer
#15 lore raw

PATCH 15/338 udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit 6ad53f0f71c52871202a7bf096feb2c59db33fc5 upstream.

If rounded block-rounded i_lenExtents matches block rounded i_size, there are no preallocation extents. Do not bother walking extent linked list.

---
 fs/udf/truncate.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/udf/truncate.c +2 -1
@@ -127,9 +127,10 @@ void udf_discard_prealloc(struct inode *
 	uint64_t lbcount = 0;
 	int8_t etype = -1, netype;
 	struct udf_inode_info *iinfo = UDF_I(inode);
+	int bsize = 1 << inode->i_blkbits;
 
 	if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB ||
-	    inode->i_size == iinfo->i_lenExtents)
+	    ALIGN(inode->i_size, bsize) == ALIGN(iinfo->i_lenExtents, bsize))
 		return;
 
 	epos.block = iinfo->i_location;
author maintainer
#16 lore raw

PATCH 16/338 udf: Fix extending file within last block

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit 1f3868f06855c97a4954c99b36f3fc9eb8f60326 upstream.

When extending file within last block it can happen that the extent is already rounded to the blocksize and thus contains the offset we want to grow up to. In such case we would mistakenly expand the last extent and make it one block longer than it should be, exposing unallocated block in a file and causing data corruption. Fix the problem by properly detecting this case and bailing out.

---
 fs/udf/inode.c |   32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
fs/udf/inode.c +17 -15
@@ -585,13 +585,17 @@ out:
 static void udf_do_extend_final_block(struct inode *inode,
 				      struct extent_position *last_pos,
 				      struct kernel_long_ad *last_ext,
-				      uint32_t final_block_len)
+				      uint32_t new_elen)
 {
-	struct super_block *sb = inode->i_sb;
 	uint32_t added_bytes;
 
-	added_bytes = final_block_len -
-		      (last_ext->extLength & (sb->s_blocksize - 1));
+	/*
+	 * Extent already large enough? It may be already rounded up to block
+	 * size...
+	 */
+	if (new_elen <= (last_ext->extLength & UDF_EXTENT_LENGTH_MASK))
+		return;
+	added_bytes = (last_ext->extLength & UDF_EXTENT_LENGTH_MASK) - new_elen;
 	last_ext->extLength += added_bytes;
 	UDF_I(inode)->i_lenExtents += added_bytes;
 
@@ -608,12 +612,12 @@ static int udf_extend_file(struct inode
 	int8_t etype;
 	struct super_block *sb = inode->i_sb;
 	sector_t first_block = newsize >> sb->s_blocksize_bits, offset;
-	unsigned long partial_final_block;
+	loff_t new_elen;
 	int adsize;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	struct kernel_long_ad extent;
 	int err = 0;
-	int within_final_block;
+	bool within_last_ext;
 
 	if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
 		adsize = sizeof(struct short_ad);
@@ -629,9 +633,9 @@ static int udf_extend_file(struct inode
 	udf_discard_prealloc(inode);
 
 	etype = inode_bmap(inode, first_block, &epos, &eloc, &elen, &offset);
-	within_final_block = (etype != -1);
+	within_last_ext = (etype != -1);
 	/* We don't expect extents past EOF... */
-	WARN_ON_ONCE(etype != -1 &&
+	WARN_ON_ONCE(within_last_ext &&
 		     elen > ((loff_t)offset + 1) << inode->i_blkbits);
 
 	if ((!epos.bh && epos.offset == udf_file_entry_alloc_offset(inode)) ||
@@ -648,19 +652,17 @@ static int udf_extend_file(struct inode
 		extent.extLength |= etype << 30;
 	}
 
-	partial_final_block = newsize & (sb->s_blocksize - 1);
+	new_elen = ((loff_t)offset << inode->i_blkbits) |
+					(newsize & (sb->s_blocksize - 1));
 
 	/* File has extent covering the new size (could happen when extending
 	 * inside a block)?
 	 */
-	if (within_final_block) {
+	if (within_last_ext) {
 		/* Extending file within the last file block */
-		udf_do_extend_final_block(inode, &epos, &extent,
-					  partial_final_block);
+		udf_do_extend_final_block(inode, &epos, &extent, new_elen);
 	} else {
-		loff_t add = ((loff_t)offset << sb->s_blocksize_bits) |
-			     partial_final_block;
-		err = udf_do_extend_file(inode, &epos, &extent, add);
+		err = udf_do_extend_file(inode, &epos, &extent, new_elen);
 	}
 
 	if (err < 0)
author maintainer
#17 lore raw

PATCH 17/338 usb: gadget: uvc: Prevent buffer overflow in setup handler

In reply to Greg Kroah-Hartman

From: Szymon Heidrich <[email protected]>

commit 4c92670b16727365699fe4b19ed32013bab2c107 upstream.

Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes.

---
 drivers/usb/gadget/function/f_uvc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/usb/gadget/function/f_uvc.c +3 -2
@@ -220,8 +220,9 @@ uvc_function_ep0_complete(struct usb_ep
 
 		memset(&v4l2_event, 0, sizeof(v4l2_event));
 		v4l2_event.type = UVC_EVENT_DATA;
-		uvc_event->data.length = req->actual;
-		memcpy(&uvc_event->data.data, req->buf, req->actual);
+		uvc_event->data.length = min_t(unsigned int, req->actual,
+			sizeof(uvc_event->data.data));
+		memcpy(&uvc_event->data.data, req->buf, uvc_event->data.length);
 		v4l2_event_queue(&uvc->vdev, &v4l2_event);
 	}
 }
author maintainer
#18 lore raw

PATCH 18/338 USB: serial: option: add Quectel EM05-G modem

In reply to Greg Kroah-Hartman

From: Duke Xin <[email protected]>

commit f0052d7a1edb3d8921b4e154aa8c46c4845b3714 upstream.

The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively:

"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode
--------------

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0311 Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode
--------------

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0311 Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/serial/option.c +3 -0
@@ -258,6 +258,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EP06			0x0306
 #define QUECTEL_PRODUCT_EM05G			0x030a
 #define QUECTEL_PRODUCT_EM060K			0x030b
+#define QUECTEL_PRODUCT_EM05G_SG		0x0311
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_RM520N			0x0801
@@ -1163,6 +1164,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
 	  .driver_info = RSVD(6) | ZLP },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
author maintainer
#19 lore raw

PATCH 19/338 USB: serial: cp210x: add Kamstrup RF sniffer PIDs

In reply to Greg Kroah-Hartman

From: Bruno Thomsen <[email protected]>

commit e88906b169ebcb8046e8f0ad76edd09ab41cfdfe upstream.

The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack.

RF sniffers can analyze packets meta data including power level and perform packet injection.

Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts

---
 drivers/usb/serial/cp210x.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/cp210x.c +2 -0
@@ -199,6 +199,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
 	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
 	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+	{ USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */
+	{ USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */
 	{ USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
 	{ USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
author maintainer
#20 lore raw

PATCH 20/338 igb: Initialize mailbox message for VF reset

In reply to Greg Kroah-Hartman

From: Tony Nguyen <[email protected]>

commit de5dc44370fbd6b46bd7f1a1e00369be54a041c8 upstream.

When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case.

---
 drivers/net/ethernet/intel/igb/igb_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/igb/igb_main.c +1 -1
@@ -6422,7 +6422,7 @@ static void igb_vf_reset_msg(struct igb_
 {
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
-	u32 reg, msgbuf[3];
+	u32 reg, msgbuf[3] = {};
 	u8 *addr = (u8 *)(&msgbuf[1]);
 
 	/* process all the same items cleared in a function level reset */
author maintainer
#21 lore raw

PATCH 21/338 Bluetooth: L2CAP: Fix u8 overflow

In reply to Greg Kroah-Hartman

From: Sungwoo Kim <[email protected]>

[ Upstream commit bcd70260ef56e0aee8a4fc6cd214a419900b0765 ]

By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255).
This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP

Btmon log:
Bluetooth monitor ver 5.64
= Note: Linux version 6.1.0-rc2 (x86_64) 0.264594
= Note: Bluetooth subsystem version 2.22 0.264636
@ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191
= New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604
@ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741
= Open Index: 00:00:00:00:00:00 [hci0] 13.900426
(...)

Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106

        invalid packet size (12 != 1033)
        08 00 01 00 02 01 04 00 01 10 ff ff              ............
Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561

        invalid packet size (14 != 1547)
        0a 00 01 00 04 01 06 00 40 00 00 00 00 00        ........@.....
Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390

        invalid packet size (16 != 2061)
        0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04  ........@.......
Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932

        invalid packet size (16 != 2061)
        0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00  ........@.......

= bluetoothd: Bluetooth daemon 5.43 14.401828

Quoted 1 line

ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753

        invalid packet size (12 != 1033)
        08 00 01 00 04 01 04 00 40 00 00 00              ........@...
---
 net/bluetooth/l2cap_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/bluetooth/l2cap_core.c +2 -1
index 494f3a7b9cf8..a5a19be51aff 100644
@@ -4193,7 +4193,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
 
 	chan->ident = cmd->ident;
 	l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
-	chan->num_conf_rsp++;
+	if (chan->num_conf_rsp < L2CAP_CONF_MAX_CONF_RSP)
+		chan->num_conf_rsp++;
 
 	/* Reset config buffer. */
 	chan->conf_len = 0;
Signature · 1 line
2.35.1
author maintainer
#22 lore raw

PATCH 22/338 net: loopback: use NET_NAME_PREDICTABLE for name_assign_type

In reply to Greg Kroah-Hartman

From: Rasmus Villemoes <[email protected]>

[ Upstream commit 31d929de5a112ee1b977a89c57de74710894bbbf ]

When the name_assign_type attribute was introduced (commit 685343fc3ba6, "net: add name_assign_type netdev attribute"), the loopback device was explicitly mentioned as one which would make use of NET_NAME_PREDICTABLE:

The name_assign_type attribute gives hints where the interface name of a given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way that is guaranteed to avoid reuse and always be the same for a given device. Examples include statically created devices like the loopback device [...]

Switch to that so that reading /sys/class/net/lo/name_assign_type produces something sensible instead of returning -EINVAL.

---
 drivers/net/loopback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/loopback.c +1 -1
index 30612497643c..daef41ce2349 100644
@@ -206,7 +206,7 @@ static __net_init int loopback_net_init(struct net *net)
 	int err;
 
 	err = -ENOMEM;
-	dev = alloc_netdev(0, "lo", NET_NAME_UNKNOWN, loopback_setup);
+	dev = alloc_netdev(0, "lo", NET_NAME_PREDICTABLE, loopback_setup);
 	if (!dev)
 		goto out;
 
Signature · 1 line
2.35.1
author maintainer
#23 lore raw

PATCH 23/338 usb: musb: remove extra check in musb_gadget_vbus_draw

In reply to Greg Kroah-Hartman

From: Ivaylo Dimitrov <[email protected]>

[ Upstream commit ecec4b20d29c3d6922dafe7d2555254a454272d2 ]

The checks for musb->xceiv and musb->xceiv->set_power duplicate those in usb_phy_set_power(), so there is no need of them. Moreover, not calling usb_phy_set_power() results in usb_phy_set_charger_current() not being called, so current USB config max current is not propagated through USB charger framework and charger drivers may try to draw more current than allowed or possible.

Fix that by removing those extra checks and calling usb_phy_set_power() directly.

Tested on Motorola Droid4 and Nokia N900

---
 drivers/usb/musb/musb_gadget.c | 2 --
 1 file changed, 2 deletions(-)
drivers/usb/musb/musb_gadget.c +0 -2
index 8fd68f45a8df..820df5c3e707 100644
@@ -1661,8 +1661,6 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
 	struct musb	*musb = gadget_to_musb(gadget);
 
-	if (!musb->xceiv->set_power)
-		return -EOPNOTSUPP;
 	return usb_phy_set_power(musb->xceiv, mA);
 }
 
Signature · 1 line
2.35.1
author maintainer
#24 lore raw

PATCH 24/338 ARM: dts: qcom: apq8064: fix coresight compatible

In reply to Greg Kroah-Hartman

From: Luca Weiss <[email protected]>

[ Upstream commit a42b1ee868361f1cb0492f1bdaefb43e0751e468 ]

There's a typo missing the arm, prefix of arm,coresight-etb10. Fix it to make devicetree validation happier.

---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/qcom-apq8064.dtsi +1 -1
index 459358b54ab4..dac14153c7bf 100644
@@ -1534,7 +1534,7 @@ wifi {
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
Signature · 1 line
2.35.1
author maintainer
#25 lore raw

PATCH 25/338 drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static

In reply to Greg Kroah-Hartman

From: Chen Jiahao <[email protected]>

[ Upstream commit adf85adc2a7199b41e7a4da083bd17274a3d6969 ]

There is a sparse warning shown below:

drivers/soc/ti/knav_qmss_queue.c:70:12: warning: symbol 'knav_acc_firmwares' was not declared. Should it be static?

Since 'knav_acc_firmwares' is only called within knav_qmss_queue.c, mark it as static to fix the warning.

Fixes 96ee19becc3b ("soc: ti: add firmware file name as part of the driver")
---
 drivers/soc/ti/knav_qmss_queue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/ti/knav_qmss_queue.c +1 -1
index 25baf13d6dfd..c2307872ed9e 100644
@@ -63,7 +63,7 @@ static DEFINE_MUTEX(knav_dev_lock);
  * Newest followed by older ones. Search is done from start of the array
  * until a firmware file is found.
  */
-const char *knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};
+static const char * const knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};
 
 /**
  * knav_queue_notify: qmss queue notfier call
Signature · 1 line
2.35.1
author maintainer
#26 lore raw

PATCH 26/338 arm: dts: spear600: Fix clcd interrupt

In reply to Greg Kroah-Hartman

From: Kory Maincent <[email protected]>

[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ]

Interrupt 12 of the Interrupt controller belongs to the SMI controller, the right one for the display controller is the interrupt 13.

Fixes 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
---
 arch/arm/boot/dts/spear600.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/spear600.dtsi +1 -1
index 00166eb9be86..ca07e73e1f27 100644
@@ -53,7 +53,7 @@ clcd: clcd@fc200000 {
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
Signature · 1 line
2.35.1
author maintainer
#27 lore raw

PATCH 27/338 soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe

In reply to Greg Kroah-Hartman

From: Zhang Qilong <[email protected]>

[ Upstream commit 69460e68eb662064ab4188d4e129ff31c1f23ed9 ]

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context.

Fixes 984aa6dbf4ca ("OMAP3: PM: Adding smartreflex driver support.")
---
 drivers/power/avs/smartreflex.c | 1 +
 1 file changed, 1 insertion(+)
drivers/power/avs/smartreflex.c +1 -0
index 4b6fddc18394..401dbeccd0c7 100644
@@ -971,6 +971,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 err_debugfs:
 	debugfs_remove_recursive(sr_info->dbg_dir);
 err_list_del:
+	pm_runtime_disable(&pdev->dev);
 	list_del(&sr_info->node);
 	return ret;
 }
Signature · 1 line
2.35.1
author maintainer
#28 lore raw

PATCH 28/338 arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit 5f535cc583759c9c60d4cc9b8d221762e2d75387 ]

Update its unit name to oscillator-26m and remove the unneeded unit address to fix a unit_address_vs_reg warning.

---
 arch/arm64/boot/dts/mediatek/mt6797.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt6797.dtsi +1 -1
index 4beaa71107d7..ebe1b5343966 100644
@@ -101,7 +101,7 @@ cpu9: cpu@201 {
 		};
 	};
 
-	clk26m: oscillator@0 {
+	clk26m: oscillator-26m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
Signature · 1 line
2.35.1
author maintainer
#29 lore raw

PATCH 29/338 ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
---
 arch/arm/boot/dts/dove.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/dove.dtsi +1 -1
index c78471b05ab4..305bceff299c 100644
@@ -129,7 +129,7 @@ pcie0: pcie@1 {
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
Signature · 1 line
2.35.1
author maintainer
#30 lore raw

PATCH 30/338 ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
---
 arch/arm/boot/dts/armada-370.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/armada-370.dtsi +1 -1
index b1cf5a26f3c2..7a4d308a56f4 100644
@@ -111,7 +111,7 @@ pcie0: pcie@1,0 {
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
Signature · 1 line
2.35.1
author maintainer
#31 lore raw

PATCH 31/338 ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
---
 arch/arm/boot/dts/armada-xp-mv78230.dtsi |  8 ++++----
 arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 ++++++++--------
 2 files changed, 12 insertions(+), 12 deletions(-)
arch/arm/boot/dts/armada-xp-mv78230.dtsi +4 -4
index 129738f7973d..0511a8204843 100644
@@ -134,7 +134,7 @@ pcie1: pcie@1,0 {
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -152,7 +152,7 @@ pcie2: pcie@2,0 {
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -170,7 +170,7 @@ pcie3: pcie@3,0 {
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -188,7 +188,7 @@ pcie4: pcie@4,0 {
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
arch/arm/boot/dts/armada-xp-mv78260.dtsi +8 -8
index e58d597e37b9..78fb45272dba 100644
@@ -149,7 +149,7 @@ pcie1: pcie@1,0 {
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -167,7 +167,7 @@ pcie2: pcie@2,0 {
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -185,7 +185,7 @@ pcie3: pcie@3,0 {
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -203,7 +203,7 @@ pcie4: pcie@4,0 {
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -221,7 +221,7 @@ pcie5: pcie@5,0 {
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -239,7 +239,7 @@ pcie6: pcie@6,0 {
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -257,7 +257,7 @@ pcie7: pcie@7,0 {
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -275,7 +275,7 @@ pcie8: pcie@8,0 {
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
Signature · 1 line
2.35.1
author maintainer
#32 lore raw

PATCH 32/338 ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
---
 arch/arm/boot/dts/armada-375.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/armada-375.dtsi +1 -1
index 2cb1bcd30976..5425a8447551 100644
@@ -621,7 +621,7 @@ pcie0: pcie@1,0 {
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
Signature · 1 line
2.35.1
author maintainer
#33 lore raw

PATCH 33/338 ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
---
 arch/arm/boot/dts/armada-380.dtsi | 4 ++--
 arch/arm/boot/dts/armada-385.dtsi | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)
arch/arm/boot/dts/armada-380.dtsi +2 -2
index 132596fd0860..91dbf11ef0f9 100644
@@ -116,7 +116,7 @@ pcie@1,0 {
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -135,7 +135,7 @@ pcie@2,0 {
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
arch/arm/boot/dts/armada-385.dtsi +3 -3
index 74863aff01c6..1f047dc7739e 100644
@@ -121,7 +121,7 @@ pcie1: pcie@1,0 {
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -140,7 +140,7 @@ pcie2: pcie@2,0 {
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -162,7 +162,7 @@ pcie3: pcie@3,0 {
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
Signature · 1 line
2.35.1
author maintainer
#34 lore raw

PATCH 34/338 ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port (PCI-to-PCI bridge) should match BDF in address part in that DT node name as specified resource belongs to Marvell PCIe Root Port itself.

Fixes 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
---
 arch/arm/boot/dts/armada-39x.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/armada-39x.dtsi +3 -3
index 5218bd2a248d..8c162013c1cb 100644
@@ -493,7 +493,7 @@ pcie@1,0 {
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -512,7 +512,7 @@ pcie@2,0 {
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
@@ -534,7 +534,7 @@ pcie@3,0 {
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
Signature · 1 line
2.35.1
author maintainer
#35 lore raw

PATCH 35/338 ARM: dts: turris-omnia: Add ethernet aliases

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]

This allows bootloader to correctly pass MAC addresses used by bootloader to individual interfaces into kernel device tree.

Fixes 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
---
 arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm/boot/dts/armada-385-turris-omnia.dts +6 -0
index 00f70c2fab24..f7ac4d9f76cf 100644
@@ -55,6 +55,12 @@ chosen {
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
Signature · 1 line
2.35.1
author maintainer
#36 lore raw

PATCH 36/338 ARM: dts: turris-omnia: Add switch port 6 node

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]

Switch port 6 is connected to eth0, so add appropriate device tree node for it.

Fixes 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
---
 arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
arch/arm/boot/dts/armada-385-turris-omnia.dts +11 -1
index f7ac4d9f76cf..57b544a64d06 100644
@@ -330,7 +330,17 @@ fixed-link {
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
Signature · 1 line
2.35.1
author maintainer
#37 lore raw

PATCH 37/338 pstore/ram: Fix error return code in ramoops_probe()

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit e1fce564900f8734edf15b87f028c57e14f6e28d ]

In the if (dev_of_node(dev) && !pdata) path, the "err" may be assigned a value of 0, so the error return code -EINVAL may be incorrectly set to 0. To fix set valid return code before calling to goto.

Fixes 35da60941e44 ("pstore/ram: add Device Tree bindings")
---
 fs/pstore/ram.c | 2 ++
 1 file changed, 2 insertions(+)
fs/pstore/ram.c +2 -0
index 11c7a171c0a1..dc5a40058c2f 100644
@@ -749,6 +749,7 @@ static int ramoops_probe(struct platform_device *pdev)
 	/* Make sure we didn't get bogus platform data pointer. */
 	if (!pdata) {
 		pr_err("NULL platform data\n");
+		err = -EINVAL;
 		goto fail_out;
 	}
 
@@ -756,6 +757,7 @@ static int ramoops_probe(struct platform_device *pdev)
 			!pdata->ftrace_size && !pdata->pmsg_size)) {
 		pr_err("The memory size and the record/console size must be "
 			"non-zero\n");
+		err = -EINVAL;
 		goto fail_out;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#38 lore raw

PATCH 38/338 ARM: mmp: fix timer_read delay

In reply to Greg Kroah-Hartman

From: Doug Brown <[email protected]>

[ Upstream commit e348b4014c31041e13ff370669ba3348c4d385e3 ]

timer_read() was using an empty 100-iteration loop to wait for the TMR_CVWR register to capture the latest timer counter value. The delay wasn't long enough. This resulted in CPU idle time being extremely underreported on PXA168 with CONFIG_NO_HZ_IDLE=y.

Switch to the approach used in the vendor kernel, which implements the capture delay by reading TMR_CVWR a few times instead.

Fixes 49cbe78637eb ("[ARM] pxa: add base support for Marvell's PXA168 processor line")
---
 arch/arm/mach-mmp/time.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
arch/arm/mach-mmp/time.c +7 -4
index 96ad1db0b04b..edd280e75546 100644
@@ -52,18 +52,21 @@
 static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
Signature · 1 line
2.35.1
author maintainer
#39 lore raw

PATCH 39/338 pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP

In reply to Greg Kroah-Hartman

From: Stephen Boyd <[email protected]>

[ Upstream commit e6b842741b4f39007215fd7e545cb55aa3d358a2 ]

An oops can be induced by running 'cat /proc/kcore > /dev/null' on devices using pstore with the ram backend because kmap_atomic() assumes lowmem pages are accessible with __va().

 Unable to handle kernel paging request at virtual address ffffff807ff2b000
 Mem abort info:
 ESR = 0x96000006
 EC = 0x25: DABT (current EL), IL = 32 bits
 SET = 0, FnV = 0
 EA = 0, S1PTW = 0
 FSC = 0x06: level 2 translation fault
 Data abort info:
 ISV = 0, ISS = 0x00000006
 CM = 0, WnR = 0
 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000
 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000
 Internal error: Oops: 96000006 [#1] PREEMPT SMP
 Modules linked in: dm_integrity
 CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba
 Hardware name: Google Lazor (rev3 - 8) (DT)
 pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __memcpy+0x110/0x260
 lr : vread+0x194/0x294
 sp : ffffffc013ee39d0
 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000
 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000
 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000
 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60
 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001
 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b
 x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000
 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78
 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000
 Call trace:
 __memcpy+0x110/0x260
 read_kcore+0x584/0x778
 proc_reg_read+0xb4/0xe4

During early boot, memblock reserves the pages for the ramoops reserved memory node in DT that would otherwise be part of the direct lowmem mapping. Pstore's ram backend reuses those reserved pages to change the memory type (writeback or non-cached) by passing the pages to vmap() (see pfn_to_page() usage in persistent_ram_vmap() for more details) with specific flags. When read_kcore() starts iterating over the vmalloc region, it runs over the virtual address that vmap() returned for ramoops. In aligned_vread() the virtual address is passed to vmalloc_to_page() which returns the page struct for the reserved lowmem area. That lowmem page is passed to kmap_atomic(), which effectively calls page_to_virt() that assumes a lowmem page struct must be directly accessible with __va() and friends. These pages are mapped via vmap() though, and the lowmem mapping was never made, so accessing them via the lowmem virtual address oopses like above.

Let's side-step this problem by passing VM_IOREMAP to vmap(). This will tell vread() to not include the ramoops region in the kcore. Instead the area will look like a bunch of zeros. The alternative is to teach kmap() about vmalloc areas that intersect with lowmem. Presumably such a change isn't a one-liner, and there isn't much interest in inspecting the ramoops region in kcore files anyway, so the most expedient route is taken for now.

Cc Brian Geffon <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc Andrew Morton <[email protected]>
Fixes 404a6043385d ("staging: android: persistent_ram: handle reserving and mapping memory")
---
 fs/pstore/ram_core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/pstore/ram_core.c +5 -1
index 11e558efd61e..b56cf56ae926 100644
@@ -418,7 +418,11 @@ static void *persistent_ram_vmap(phys_addr_t start, size_t size,
 		phys_addr_t addr = page_start + i * PAGE_SIZE;
 		pages[i] = pfn_to_page(addr >> PAGE_SHIFT);
 	}
-	vaddr = vmap(pages, page_count, VM_MAP, prot);
+	/*
+	 * VM_IOREMAP used here to bypass this region during vread()
+	 * and kmap_atomic() (i.e. kcore) to avoid __va() failures.
+	 */
+	vaddr = vmap(pages, page_count, VM_MAP | VM_IOREMAP, prot);
 	kfree(pages);
 
 	/*
Signature · 1 line
2.35.1
author maintainer
#40 lore raw

PATCH 40/338 tpm/tpm_crb: Fix error message in __crb_relinquish_locality()

In reply to Greg Kroah-Hartman

From: Michael Kelley <[email protected]>

[ Upstream commit f5264068071964b56dc02c9dab3d11574aaca6ff ]

The error message in __crb_relinquish_locality() mentions requestAccess instead of Relinquish. Fix it.

Fixes 888d867df441 ("tpm: cmd_ready command can be issued only after granting locality")
---
 drivers/char/tpm/tpm_crb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/tpm/tpm_crb.c +1 -1
index f978738554d5..ccc3eb40672a 100644
@@ -257,7 +257,7 @@ static int __crb_relinquish_locality(struct device *dev,
 	iowrite32(CRB_LOC_CTRL_RELINQUISH, &priv->regs_h->loc_ctrl);
 	if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, mask, value,
 				 TPM2_TIMEOUT_C)) {
-		dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n");
+		dev_warn(dev, "TPM_LOC_STATE_x.Relinquish timed out\n");
 		return -ETIME;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#41 lore raw

PATCH 41/338 cpuidle: dt: Return the correct numbers of parsed idle states

In reply to Greg Kroah-Hartman

From: Ulf Hansson <[email protected]>

[ Upstream commit ee3c2c8ad6ba6785f14a60e4081d7c82e88162a2 ]

While we correctly skips to initialize an idle state from a disabled idle state node in DT, the returned value from dt_init_idle_driver() don't get adjusted accordingly. Instead the number of found idle state nodes are returned, while the callers are expecting the number of successfully initialized idle states from DT.

This leads to cpuidle drivers unnecessarily continues to initialize their idle state specific data. Moreover, in the case when all idle states have been disabled in DT, we would end up registering a cpuidle driver, rather than relying on the default arch specific idle call.

Fixes 9f14da345599 ("drivers: cpuidle: implement DT based idle states infrastructure")
---
 drivers/cpuidle/dt_idle_states.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/cpuidle/dt_idle_states.c +1 -1
index 53342b7f1010..ea3c59d3fdad 100644
@@ -224,6 +224,6 @@ int dt_init_idle_driver(struct cpuidle_driver *drv,
 	 * also be 0 on platforms with missing DT idle states or legacy DT
 	 * configuration predating the DT idle states bindings.
 	 */
-	return i;
+	return state_idx - start_idx;
 }
 EXPORT_SYMBOL_GPL(dt_init_idle_driver);
Signature · 1 line
2.35.1
author maintainer
#42 lore raw

PATCH 42/338 alpha: fix syscall entry in !AUDUT_SYSCALL case

In reply to Greg Kroah-Hartman

From: Al Viro <[email protected]>

[ Upstream commit f7b2431a6d22f7a91c567708e071dfcd6d66db14 ]

We only want to take the slow path if SYSCALL_TRACE or SYSCALL_AUDIT is set; on !AUDIT_SYSCALL configs the current tree hits it whenever _any_ thread flag (including NEED_RESCHED, NOTIFY_SIGNAL, etc.) happens to be set.

Fixes a9302e843944 "alpha: Enable system-call auditing support"
---
 arch/alpha/kernel/entry.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/alpha/kernel/entry.S +3 -1
index d92abb01c249..25eda9c103c4 100644
@@ -469,8 +469,10 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), alpha_ni_syscall
Signature · 1 line
2.35.1
author maintainer
#43 lore raw

PATCH 43/338 PM: hibernate: Fix mistake in kerneldoc comment

In reply to Greg Kroah-Hartman

From: xiongxin <[email protected]>

[ Upstream commit 6e5d7300cbe7c3541bc31f16db3e9266e6027b4b ]

The actual maximum image size formula in hibernate_preallocate_memory() is as follows:

max_size = (count - (size + PAGES_FOR_IO)) / 2
- 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);

but the one in the kerneldoc comment of the function is different and incorrect.

Fixes ddeb64870810 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers")
[ rjw: Subject and changelog rewrite ]
---
 kernel/power/snapshot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/power/snapshot.c +2 -2
index ff2aabb70de9..3df9d57c18fe 100644
@@ -1679,8 +1679,8 @@ static unsigned long minimum_image_size(unsigned long saveable)
  * /sys/power/reserved_size, respectively).  To make this happen, we compute the
  * total number of available page frames and allocate at least
  *
- * ([page frames total] + PAGES_FOR_IO + [metadata pages]) / 2
- *  + 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE)
+ * ([page frames total] - PAGES_FOR_IO - [metadata pages]) / 2
+ *  - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE)
  *
  * of them, which corresponds to the maximum size of a hibernation image.
  *
Signature · 1 line
2.35.1
author maintainer
#44 lore raw

PATCH 44/338 fs: dont audit the capability check in simple_xattr_list()

In reply to Greg Kroah-Hartman

From: Ondrej Mosnacek <[email protected]>

[ Upstream commit e7eda157c4071cd1e69f4b1687b0fbe1ae5e6f46 ]

The check being unconditional may lead to unwanted denials reported by LSMs when a process has the capability granted by DAC, but denied by an LSM. In the case of SELinux such denials are a problem, since they can't be effectively filtered out via the policy and when not silenced, they produce noise that may hide a true problem or an attack.

Checking for the capability only if any trusted xattr is actually present wouldn't really address the issue, since calling listxattr(2) on such node on its own doesn't indicate an explicit attempt to see the trusted xattrs. Additionally, it could potentially leak the presence of trusted xattrs to an unprivileged user if they can check for the denials (e.g. through dmesg).

Therefore, it's best (and simplest) to keep the check unconditional and instead use ns_capable_noaudit() that will silence any associated LSM denials.

---
 fs/xattr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/xattr.c +1 -1
index 94f9559ba0f8..b0c322599e4c 100644
@@ -1015,7 +1015,7 @@ static int xattr_list_one(char **buffer, ssize_t *remaining_size,
 ssize_t simple_xattr_list(struct inode *inode, struct simple_xattrs *xattrs,
 			  char *buffer, size_t size)
 {
-	bool trusted = capable(CAP_SYS_ADMIN);
+	bool trusted = ns_capable_noaudit(&init_user_ns, CAP_SYS_ADMIN);
 	struct simple_xattr *xattr;
 	ssize_t remaining_size = size;
 	int err = 0;
Signature · 1 line
2.35.1
author maintainer
#45 lore raw

PATCH 45/338 perf: Fix possible memleak in pmu_dev_alloc()

In reply to Greg Kroah-Hartman

From: Chen Zhongjin <[email protected]>

[ Upstream commit e8d7a90c08ce963c592fb49845f2ccc606a2ac21 ]

In pmu_dev_alloc(), when dev_set_name() failed, it will goto free_dev and call put_device(pmu->dev) to release it.
However pmu->dev->release is assigned after this, which makes warning and memleak.
Call dev_set_name() after pmu->dev->release = pmu_dev_release to fix it.

Device '(null)' does not have a release() function...

  WARNING: CPU: 2 PID: 441 at drivers/base/core.c:2332 device_release+0x1b9/0x240
  ...
  Call Trace:
    <TASK>
    kobject_put+0x17f/0x460
    put_device+0x20/0x30
    pmu_dev_alloc+0x152/0x400
    perf_pmu_register+0x96b/0xee0
    ...
  kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
  unreferenced object 0xffff888014759000 (size 2048):
    comm "modprobe", pid 441, jiffies 4294931444 (age 38.332s)
    backtrace:
      [<0000000005aed3b4>] kmalloc_trace+0x27/0x110
      [<000000006b38f9b8>] pmu_dev_alloc+0x50/0x400
      [<00000000735f17be>] perf_pmu_register+0x96b/0xee0
      [<00000000e38477f1>] 0xffffffffc0ad8603
      [<000000004e162216>] do_one_initcall+0xd0/0x4e0
      ...
---
 kernel/events/core.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
kernel/events/core.c +5 -3
index 7ad142a5327e..eb67ef450615 100644
@@ -9180,13 +9180,15 @@ static int pmu_dev_alloc(struct pmu *pmu)
 
 	pmu->dev->groups = pmu->attr_groups;
 	device_initialize(pmu->dev);
-	ret = dev_set_name(pmu->dev, "%s", pmu->name);
-	if (ret)
-		goto free_dev;
 
 	dev_set_drvdata(pmu->dev, pmu);
 	pmu->dev->bus = &pmu_bus;
 	pmu->dev->release = pmu_dev_release;
+
+	ret = dev_set_name(pmu->dev, "%s", pmu->name);
+	if (ret)
+		goto free_dev;
+
 	ret = device_add(pmu->dev);
 	if (ret)
 		goto free_dev;
Signature · 1 line
2.35.1
author maintainer
#46 lore raw

PATCH 46/338 timerqueue: Use rb_entry_safe() in timerqueue_getnext()

In reply to Greg Kroah-Hartman

From: Barnabás Pőcze <[email protected]>

[ Upstream commit 2f117484329b233455ee278f2d9b0a4356835060 ]

When timerqueue_getnext() is called on an empty timer queue, it will use rb_entry() on a NULL pointer, which is invalid. Fix that by using rb_entry_safe() which handles NULL pointers.

This has not caused any issues so far because the offset of the rb_node member in timerqueue_node is 0, so rb_entry() is essentially a no-op.

Fixes 511885d7061e ("lib/timerqueue: Rely on rbtree semantics for next timer")
---
 include/linux/timerqueue.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/timerqueue.h +1 -1
index aff122f1062a..e1a843cb16d4 100644
@@ -35,7 +35,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
 {
 	struct rb_node *leftmost = rb_first_cached(&head->rb_root);
 
-	return rb_entry(leftmost, struct timerqueue_node, node);
+	return rb_entry_safe(leftmost, struct timerqueue_node, node);
 }
 
 static inline void timerqueue_init(struct timerqueue_node *node)
Signature · 1 line
2.35.1
author maintainer
#47 lore raw

PATCH 47/338 ocfs2: fix memory leak in ocfs2_stack_glue_init()

In reply to Greg Kroah-Hartman

From: Shang XiaoJing <[email protected]>

[ Upstream commit 13b6269dd022aaa69ca8d1df374ab327504121cf ]

ocfs2_table_header should be free in ocfs2_stack_glue_init() if ocfs2_sysfs_init() failed, otherwise kmemleak will report memleak.

BUG: memory leak
unreferenced object 0xffff88810eeb5800 (size 128):
  comm "modprobe", pid 4507, jiffies 4296182506 (age 55.888s)
  hex dump (first 32 bytes):
    c0 40 14 a0 ff ff ff ff 00 00 00 00 01 00 00 00  .@..............
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001e59e1cd>] __register_sysctl_table+0xca/0xef0
    [<00000000c04f70f7>] 0xffffffffa0050037
    [<000000001bd12912>] do_one_initcall+0xdb/0x480
    [<0000000064f766c9>] do_init_module+0x1cf/0x680
    [<000000002ba52db0>] load_module+0x6441/0x6f20
    [<000000009772580d>] __do_sys_finit_module+0x12f/0x1c0
    [<00000000380c1f22>] do_syscall_64+0x3f/0x90
    [<000000004cf473bc>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes 3878f110f71a ("ocfs2: Move the hb_ctl_path sysctl into the stack glue.")
Cc Mark Fasheh <[email protected]>
Cc Joel Becker <[email protected]>
Cc Junxiao Bi <[email protected]>
Cc Changwei Ge <[email protected]>
Cc Gang He <[email protected]>
Cc Jun Piao <[email protected]>
---
 fs/ocfs2/stackglue.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
fs/ocfs2/stackglue.c +7 -1
index e7eb08ac4215..10d691530d83 100644
@@ -715,6 +715,8 @@ static struct ctl_table_header *ocfs2_table_header;
 
 static int __init ocfs2_stack_glue_init(void)
 {
+	int ret;
+
 	strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB);
 
 	ocfs2_table_header = register_sysctl_table(ocfs2_root_table);
@@ -724,7 +726,11 @@ static int __init ocfs2_stack_glue_init(void)
 		return -ENOMEM; /* or something. */
 	}
 
-	return ocfs2_sysfs_init();
+	ret = ocfs2_sysfs_init();
+	if (ret)
+		unregister_sysctl_table(ocfs2_table_header);
+
+	return ret;
 }
 
 static void __exit ocfs2_stack_glue_exit(void)
Signature · 1 line
2.35.1
author maintainer
#48 lore raw

PATCH 48/338 MIPS: vpe-mt: fix possible memory leak while module exiting

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 5822e8cc84ee37338ab0bdc3124f6eec04dc232d ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, it need be freed when module exiting, call put_device() to give up reference, so that it can be freed in kobject_cleanup() when the refcount hit to 0. The vpe_device is static, so remove kfree() from vpe_device_release().

Fixes 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
---
 arch/mips/kernel/vpe-mt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/mips/kernel/vpe-mt.c +2 -2
index 2e003b11a098..9fd7cd48ea1d 100644
@@ -313,7 +313,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -497,6 +496,7 @@ int __init vpe_module_init(void)
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -509,7 +509,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 
Signature · 1 line
2.35.1
author maintainer
#49 lore raw

PATCH 49/338 MIPS: vpe-cmp: fix possible memory leak while module exiting

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit c5ed1fe0801f0c66b0fbce2785239a5664629057 ]

dev_set_name() allocates memory for name, it need be freed when module exiting, call put_device() to give up reference, so that it can be freed in kobject_cleanup() when the refcount hit to 0. The vpe_device is static, so remove kfree() from vpe_device_release().

Fixes 17a1d523aa58 ("MIPS: APRP: Add VPE loader support for CMP platforms.")
---
 arch/mips/kernel/vpe-cmp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/mips/kernel/vpe-cmp.c +2 -2
index 9268ebc0f61e..903c07bdc92d 100644
@@ -75,7 +75,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -157,6 +156,7 @@ int __init vpe_module_init(void)
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -169,7 +169,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 
Signature · 1 line
2.35.1
author maintainer
#50 lore raw

PATCH 50/338 PNP: fix name memory leak in pnp_alloc_dev()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 110d7b0325c55ff3620073ba4201845f59e22ebf ]

After commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, move dev_set_name() after pnp_add_id() to avoid memory leak.

Fixes 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
---
 drivers/pnp/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pnp/core.c +2 -2
index 3bf18d718975..131b925b820d 100644
@@ -160,14 +160,14 @@ struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id,
 	dev->dev.coherent_dma_mask = dev->dma_mask;
 	dev->dev.release = &pnp_release_device;
 
-	dev_set_name(&dev->dev, "%02x:%02x", dev->protocol->number, dev->number);
-
 	dev_id = pnp_add_id(dev, pnpid);
 	if (!dev_id) {
 		kfree(dev);
 		return NULL;
 	}
 
+	dev_set_name(&dev->dev, "%02x:%02x", dev->protocol->number, dev->number);
+
 	return dev;
 }
 
Signature · 1 line
2.35.1
author maintainer
#51 lore raw

PATCH 51/338 irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()

In reply to Greg Kroah-Hartman

From: Shang XiaoJing <[email protected]>

[ Upstream commit f9ee20c85b3a3ba0afd3672630ec4f93d339f015 ]

gic_probe() calls pm_runtime_get_sync() and added fail path as rpm_put to put usage_counter. However, pm_runtime_get_sync() will increment usage_counter even it failed. Fix it by replacing it with pm_runtime_resume_and_get() to keep usage counter balanced.

Fixes 9c8edddfc992 ("irqchip/gic: Add platform driver for non-root GICs that require RPM")
---
 drivers/irqchip/irq-gic-pm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/irqchip/irq-gic-pm.c +1 -1
index ecafd295c31c..21c5decfc55b 100644
@@ -112,7 +112,7 @@ static int gic_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(dev);
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		goto rpm_disable;
 
Signature · 1 line
2.35.1
author maintainer
#52 lore raw

PATCH 52/338 libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value

In reply to Greg Kroah-Hartman

From: Akinobu Mita <[email protected]>

[ Upstream commit 2e41f274f9aa71cdcc69dc1f26a3f9304a651804 ]

Patch series "fix error when writing negative value to simple attribute files".

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), but some attribute files want to accept a negative value.

This patch (of 3):

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()"), so we have to use a 64-bit value to write a negative value.

This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value.

Fixes 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Cc Alexander Viro <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Oscar Salvador <[email protected]>
Cc Rafael J. Wysocki <[email protected]>
Cc Shuah Khan <[email protected]>
Cc Wei Yongjun <[email protected]>
Cc Yicong Yang <[email protected]>
---
 fs/libfs.c         | 22 +++++++++++++++++++---
 include/linux/fs.h | 12 ++++++++++--
 2 files changed, 29 insertions(+), 5 deletions(-)
fs/libfs.c +19 -3
index 83618c21c216..251bf5004919 100644
@@ -864,8 +864,8 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
 EXPORT_SYMBOL_GPL(simple_attr_read);
 
 /* interpret the buffer as a number to call the set function with */
-ssize_t simple_attr_write(struct file *file, const char __user *buf,
-			  size_t len, loff_t *ppos)
+static ssize_t simple_attr_write_xsigned(struct file *file, const char __user *buf,
+			  size_t len, loff_t *ppos, bool is_signed)
 {
 	struct simple_attr *attr;
 	unsigned long long val;
@@ -886,7 +886,10 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf,
 		goto out;
 
 	attr->set_buf[size] = '\0';
-	ret = kstrtoull(attr->set_buf, 0, &val);
+	if (is_signed)
+		ret = kstrtoll(attr->set_buf, 0, &val);
+	else
+		ret = kstrtoull(attr->set_buf, 0, &val);
 	if (ret)
 		goto out;
 	ret = attr->set(attr->data, val);
@@ -896,8 +899,21 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf,
 	mutex_unlock(&attr->mutex);
 	return ret;
 }
+
+ssize_t simple_attr_write(struct file *file, const char __user *buf,
+			  size_t len, loff_t *ppos)
+{
+	return simple_attr_write_xsigned(file, buf, len, ppos, false);
+}
 EXPORT_SYMBOL_GPL(simple_attr_write);
 
+ssize_t simple_attr_write_signed(struct file *file, const char __user *buf,
+			  size_t len, loff_t *ppos)
+{
+	return simple_attr_write_xsigned(file, buf, len, ppos, true);
+}
+EXPORT_SYMBOL_GPL(simple_attr_write_signed);
+
 /**
  * generic_fh_to_dentry - generic helper for the fh_to_dentry export operation
  * @sb:		filesystem to do the file handle conversion on
include/linux/fs.h +10 -2
index 1084f1335c9f..ff0a992846a3 100644
@@ -3280,7 +3280,7 @@ void simple_transaction_set(struct file *file, size_t n);
  * All attributes contain a text representation of a numeric value
  * that are accessed with the get() and set() functions.
  */
-#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt)		\
+#define DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, __is_signed)	\
 static int __fops ## _open(struct inode *inode, struct file *file)	\
 {									\
 	__simple_attr_check_format(__fmt, 0ull);			\
@@ -3291,10 +3291,16 @@ static const struct file_operations __fops = {				\
 	.open	 = __fops ## _open,					\
 	.release = simple_attr_release,					\
 	.read	 = simple_attr_read,					\
-	.write	 = simple_attr_write,					\
+	.write	 = (__is_signed) ? simple_attr_write_signed : simple_attr_write,	\
 	.llseek	 = generic_file_llseek,					\
 }
 
+#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt)		\
+	DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, false)
+
+#define DEFINE_SIMPLE_ATTRIBUTE_SIGNED(__fops, __get, __set, __fmt)	\
+	DEFINE_SIMPLE_ATTRIBUTE_XSIGNED(__fops, __get, __set, __fmt, true)
+
 static inline __printf(1, 2)
 void __simple_attr_check_format(const char *fmt, ...)
 {
@@ -3309,6 +3315,8 @@ ssize_t simple_attr_read(struct file *file, char __user *buf,
 			 size_t len, loff_t *ppos);
 ssize_t simple_attr_write(struct file *file, const char __user *buf,
 			  size_t len, loff_t *ppos);
+ssize_t simple_attr_write_signed(struct file *file, const char __user *buf,
+				 size_t len, loff_t *ppos);
 
 struct ctl_table;
 int proc_nr_files(struct ctl_table *table, int write,
Signature · 1 line
2.35.1
author maintainer
#53 lore raw

PATCH 53/338 lib/notifier-error-inject: fix error when writing -errno to debugfs file

In reply to Greg Kroah-Hartman

From: Akinobu Mita <[email protected]>

[ Upstream commit f883c3edd2c432a2931ec8773c70a570115a50fe ]

The simple attribute files do not accept a negative value since the commit 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()").

This restores the previous behaviour by using newly introduced DEFINE_SIMPLE_ATTRIBUTE_SIGNED instead of DEFINE_SIMPLE_ATTRIBUTE.

Fixes 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Cc Alexander Viro <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Oscar Salvador <[email protected]>
Cc Rafael J. Wysocki <[email protected]>
Cc Shuah Khan <[email protected]>
Cc Wei Yongjun <[email protected]>
Cc Yicong Yang <[email protected]>
---
 lib/notifier-error-inject.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/notifier-error-inject.c +1 -1
index eb4a04afea80..125ea8ce23a4 100644
@@ -14,7 +14,7 @@ static int debugfs_errno_get(void *data, u64 *val)
 	return 0;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(fops_errno, debugfs_errno_get, debugfs_errno_set,
+DEFINE_SIMPLE_ATTRIBUTE_SIGNED(fops_errno, debugfs_errno_get, debugfs_errno_set,
 			"%lld\n");
 
 static struct dentry *debugfs_create_errno(const char *name, umode_t mode,
Signature · 1 line
2.35.1
author maintainer
#54 lore raw

PATCH 54/338 rapidio: fix possible name leaks when rio_add_device() fails

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit f9574cd48679926e2a569e1957a5a1bcc8a719ac ]

Patch series "rapidio: fix three possible memory leaks".

This patchset fixes three name leaks in error handling.
- patch #1 fixes two name leaks while rio_add_device() fails.
- patch #2 fixes a name leak while rio_register_mport() fails.

This patch (of 2):

If rio_add_device() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and the 'rdev' can be freed in rio_release_dev().

Fixes e8de370188d0 ("rapidio: add mport char device driver")
Fixes 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Cc Alexandre Bounine <[email protected]>
Cc Matt Porter <[email protected]>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 7 +++++--
 drivers/rapidio/rio-scan.c               | 8 ++++++--
 2 files changed, 11 insertions(+), 4 deletions(-)
drivers/rapidio/devices/rio_mport_cdev.c +5 -2
index a87c024d5670..ce12b5c25b8c 100644
@@ -1863,8 +1863,11 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 		rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
 				   0, 0xffff);
 	err = rio_add_device(rdev);
-	if (err)
-		goto cleanup;
+	if (err) {
+		put_device(&rdev->dev);
+		return err;
+	}
+
 	rio_dev_get(rdev);
 
 	return 0;
drivers/rapidio/rio-scan.c +6 -2
index 23429bdaca84..26ab8c463dae 100644
@@ -460,8 +460,12 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 				   0, 0xffff);
 
 	ret = rio_add_device(rdev);
-	if (ret)
-		goto cleanup;
+	if (ret) {
+		if (rswitch)
+			kfree(rswitch->route_table);
+		put_device(&rdev->dev);
+		return NULL;
+	}
 
 	rio_dev_get(rdev);
 
Signature · 1 line
2.35.1
author maintainer
#55 lore raw

PATCH 55/338 rapidio: rio: fix possible name leak in rio_register_mport()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit e92a216d16bde65d21a3227e0fb2aa0794576525 ]

If device_register() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and list_del() is called to delete the port from rio_mports.

Fixes 2aaf308b95b2 ("rapidio: rework device hierarchy and introduce mport class of devices")
Cc Alexandre Bounine <[email protected]>
Cc Matt Porter <[email protected]>
---
 drivers/rapidio/rio.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/rapidio/rio.c +7 -2
index 38d949405618..94843c8a687e 100644
@@ -2272,11 +2272,16 @@ int rio_register_mport(struct rio_mport *port)
 	atomic_set(&port->state, RIO_DEVICE_RUNNING);
 
 	res = device_register(&port->dev);
-	if (res)
+	if (res) {
 		dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n",
 			port->id, res);
-	else
+		mutex_lock(&rio_mport_list_lock);
+		list_del(&port->node);
+		mutex_unlock(&rio_mport_list_lock);
+		put_device(&port->dev);
+	} else {
 		dev_dbg(&port->dev, "RIO: registered mport%d\n", port->id);
+	}
 
 	return res;
 }
Signature · 1 line
2.35.1
author maintainer
#56 lore raw

PATCH 56/338 ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()

In reply to Greg Kroah-Hartman

From: Li Zetao <[email protected]>

[ Upstream commit 470188b09e92d83c5a997f25f0e8fb8cd2bc3469 ]

There is an use-after-free reported by KASAN:

  BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
  Read of size 1 at addr ffff888112afc460 by task modprobe/2111
  CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
  Call Trace:
   <TASK>
   kasan_report+0xae/0xe0
   acpi_ut_remove_reference+0x3b/0x82
   acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
   acpi_ds_store_object_to_local+0x15d/0x3a0
   acpi_ex_store+0x78d/0x7fd
   acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
   acpi_ps_parse_aml+0x217/0x8d5
   ...
   </TASK>

The root cause of the problem is that the acpi_operand_object is freed when acpi_ut_walk_package_tree() fails in acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in acpi_ut_copy_iobject_to_iobject(). The problem was introduced by "8aa5e56eeb61" commit, this commit is to fix memory leak in acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove operation, lead to "acpi_operand_object" used after free.

Fix it by removing acpi_ut_remove_reference() in acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage() is called to copy an internal package object into another internal package object, when it fails, the memory of acpi_operand_object should be freed by the caller.

Fixes 8aa5e56eeb61 ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject")
---
 drivers/acpi/acpica/utcopy.c | 7 -------
 1 file changed, 7 deletions(-)
drivers/acpi/acpica/utcopy.c +0 -7
index e9382255d6c6..3b88d9c91012 100644
@@ -950,13 +950,6 @@ acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
 	status = acpi_ut_walk_package_tree(source_obj, dest_obj,
 					   acpi_ut_copy_ielement_to_ielement,
 					   walk_state);
-	if (ACPI_FAILURE(status)) {
-
-		/* On failure, delete the destination package object */
-
-		acpi_ut_remove_reference(dest_obj);
-	}
-
 	return_ACPI_STATUS(status);
 }
 
Signature · 1 line
2.35.1
author maintainer
#57 lore raw

PATCH 57/338 uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix

In reply to Greg Kroah-Hartman

From: Oleg Nesterov <[email protected]>

[ Upstream commit cefa72129e45313655d53a065b8055aaeb01a0c9 ]

Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each function to reserve extra space for hot-patching, and currently it is not possible to probe these functions because branch_setup_xol_ops() wrongly rejects NOP with REP prefix as it treats them like word-sized branch instructions.

---
 arch/x86/kernel/uprobes.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/x86/kernel/uprobes.c +3 -1
index 52bb7413f352..953ed5b5a218 100644
@@ -718,8 +718,9 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 	switch (opc1) {
 	case 0xeb:	/* jmp 8 */
 	case 0xe9:	/* jmp 32 */
-	case 0x90:	/* prefix* + nop; same as jmp with .offs = 0 */
 		break;
+	case 0x90:	/* prefix* + nop; same as jmp with .offs = 0 */
+		goto setup;
 
 	case 0xe8:	/* call relative */
 		branch_clear_offset(auprobe, insn);
@@ -748,6 +749,7 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 			return -ENOTSUPP;
 	}
 
+setup:
 	auprobe->branch.opc1 = opc1;
 	auprobe->branch.ilen = insn->length;
 	auprobe->branch.offs = insn->immediate.value;
Signature · 1 line
2.35.1
author maintainer
#58 lore raw

PATCH 58/338 x86/xen: Fix memory leak in xen_init_lock_cpu()

In reply to Greg Kroah-Hartman

From: Xiu Jianfeng <[email protected]>

[ Upstream commit ca84ce153d887b1dc8b118029976cc9faf2a9b40 ]

In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(), if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead to a memory leak issue, fix it.

---
 arch/x86/xen/spinlock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/xen/spinlock.c +3 -3
index e22ee2439615..957ef40b8772 100644
@@ -81,6 +81,7 @@ void xen_init_lock_cpu(int cpu)
 	     cpu, per_cpu(lock_kicker_irq, cpu));
 
 	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+	per_cpu(irq_name, cpu) = name;
 	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
 				     cpu,
 				     dummy_handler,
@@ -91,7 +92,6 @@ void xen_init_lock_cpu(int cpu)
 	if (irq >= 0) {
 		disable_irq(irq); /* make sure it's never delivered */
 		per_cpu(lock_kicker_irq, cpu) = irq;
-		per_cpu(irq_name, cpu) = name;
 	}
 
 	printk("cpu %d spinlock event irq %d\n", cpu, irq);
@@ -104,6 +104,8 @@ void xen_uninit_lock_cpu(int cpu)
 	if (!xen_pvspin)
 		return;
 
+	kfree(per_cpu(irq_name, cpu));
+	per_cpu(irq_name, cpu) = NULL;
 	/*
 	 * When booting the kernel with 'mitigations=auto,nosmt', the secondary
 	 * CPUs are not activated, and lock_kicker_irq is not initialized.
@@ -114,8 +116,6 @@ void xen_uninit_lock_cpu(int cpu)
 
 	unbind_from_irqhandler(irq, NULL);
 	per_cpu(lock_kicker_irq, cpu) = -1;
-	kfree(per_cpu(irq_name, cpu));
-	per_cpu(irq_name, cpu) = NULL;
 }
 
 PV_CALLEE_SAVE_REGS_THUNK(xen_vcpu_stolen);
Signature · 1 line
2.35.1
author maintainer
#59 lore raw

PATCH 59/338 platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()

In reply to Greg Kroah-Hartman

From: Yu Liao <[email protected]>

[ Upstream commit 727cc0147f5066e359aca65cc6cc5e6d64cc15d8 ]

The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method() is not freed after the call, so it leads to memory leak.

The method results in ACPI buffer is not used, so just pass NULL to wmi_evaluate_method() which fixes the memory leak.

---
 drivers/platform/x86/mxm-wmi.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/platform/x86/mxm-wmi.c +2 -6
index 35d8b9a939f9..9c1893a703e6 100644
@@ -48,13 +48,11 @@ int mxm_wmi_call_mxds(int adapter)
 		.xarg = 1,
 	};
 	struct acpi_buffer input = { (acpi_size)sizeof(args), &args };
-	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
 	acpi_status status;
 
 	printk("calling mux switch %d\n", adapter);
 
-	status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input,
-				     &output);
+	status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, NULL);
 
 	if (ACPI_FAILURE(status))
 		return status;
@@ -73,13 +71,11 @@ int mxm_wmi_call_mxmx(int adapter)
 		.xarg = 1,
 	};
 	struct acpi_buffer input = { (acpi_size)sizeof(args), &args };
-	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
 	acpi_status status;
 
 	printk("calling mux switch %d\n", adapter);
 
-	status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input,
-				     &output);
+	status = wmi_evaluate_method(MXM_WMMX_GUID, 0x0, adapter, &input, NULL);
 
 	if (ACPI_FAILURE(status))
 		return status;
Signature · 1 line
2.35.1
author maintainer
#60 lore raw

PATCH 60/338 MIPS: BCM63xx: Add check for NULL for clk in clk_enable

In reply to Greg Kroah-Hartman

From: Anastasia Belova <[email protected]>

[ Upstream commit ee9ef11bd2a59c2fefaa0959e5efcdf040d7c654 ]

Check clk for NULL before calling clk_enable_unlocked where clk is dereferenced. There is such check in other implementations of clk_enable.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
---
 arch/mips/bcm63xx/clk.c | 2 ++
 1 file changed, 2 insertions(+)
arch/mips/bcm63xx/clk.c +2 -0
index 73f2534b9676..2f4b5978433d 100644
@@ -317,6 +317,8 @@ static struct clk clk_periph = {
  */
 int clk_enable(struct clk *clk)
 {
+	if (!clk)
+		return 0;
 	mutex_lock(&clocks_mutex);
 	clk_enable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
Signature · 1 line
2.35.1
author maintainer
#61 lore raw

PATCH 61/338 fs: sysv: Fix sysv_nblocks() returns wrong value

In reply to Greg Kroah-Hartman

From: Chen Zhongjin <[email protected]>

[ Upstream commit e0c49bd2b4d3cd1751491eb2d940bce968ac65e9 ]

sysv_nblocks() returns 'blocks' rather than 'res', which only counting the number of triple-indirect blocks and causing sysv_getattr() gets a wrong result.

[AV: this is actually a sysv counterpart of minixfs fix - 0fcd426de9d0 "[PATCH] minix block usage counting fix" in historical tree; mea culpa, should've thought to check fs/sysv back then...]

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 fs/sysv/itree.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/sysv/itree.c +1 -1
index bcb67b0cabe7..31f66053e239 100644
@@ -438,7 +438,7 @@ static unsigned sysv_nblocks(struct super_block *s, loff_t size)
 		res += blocks;
 		direct = 1;
 	}
-	return blocks;
+	return res;
 }
 
 int sysv_getattr(const struct path *path, struct kstat *stat,
Signature · 1 line
2.35.1
author maintainer
#62 lore raw

PATCH 62/338 rapidio: fix possible UAF when kfifo_alloc() fails

In reply to Greg Kroah-Hartman

From: Wang Weiyang <[email protected]>

[ Upstream commit 02d7d89f816951e0862147d751b1150d67aaebdd ]

If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free priv. But priv is still in the chdev->file_list, then list traversal may cause UAF. This fixes the following smatch warning:

drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list

Fixes e8de370188d0 ("rapidio: add mport char device driver")
Cc Alexandre Bounine <[email protected]>
Cc Dan Carpenter <[email protected]>
Cc Jakob Koschel <[email protected]>
Cc John Hubbard <[email protected]>
Cc Matt Porter <[email protected]>
Cc Yang Yingliang <[email protected]>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/rapidio/devices/rio_mport_cdev.c +3 -4
index ce12b5c25b8c..d6d223b63313 100644
@@ -1963,10 +1963,6 @@ static int mport_cdev_open(struct inode *inode, struct file *filp)
 
 	priv->md = chdev;
 
-	mutex_lock(&chdev->file_mutex);
-	list_add_tail(&priv->list, &chdev->file_list);
-	mutex_unlock(&chdev->file_mutex);
-
 	INIT_LIST_HEAD(&priv->db_filters);
 	INIT_LIST_HEAD(&priv->pw_filters);
 	spin_lock_init(&priv->fifo_lock);
@@ -1986,6 +1982,9 @@ static int mport_cdev_open(struct inode *inode, struct file *filp)
 	spin_lock_init(&priv->req_lock);
 	mutex_init(&priv->dma_lock);
 #endif
+	mutex_lock(&chdev->file_mutex);
+	list_add_tail(&priv->list, &chdev->file_list);
+	mutex_unlock(&chdev->file_mutex);
 
 	filp->private_data = priv;
 	goto out;
Signature · 1 line
2.35.1
author maintainer
#63 lore raw

PATCH 63/338 eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD

In reply to Greg Kroah-Hartman

From: Zhang Qilong <[email protected]>

[ Upstream commit fd4e60bf0ef8eb9edcfa12dda39e8b6ee9060492 ]

Commit ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()") forgot to change int to __u64 in the CONFIG_EVENTFD=n stub function.

Fixes ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()")
Cc Dylan Yudaken <[email protected]>
Cc Jens Axboe <[email protected]>
Cc Sha Zhengju <[email protected]>
---
 include/linux/eventfd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/eventfd.h +1 -1
index 60b2985e8a18..e05629a35bba 100644
@@ -57,7 +57,7 @@ static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
 	return ERR_PTR(-ENOSYS);
 }
 
-static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
+static inline int eventfd_signal(struct eventfd_ctx *ctx, __u64 n)
 {
 	return -ENOSYS;
 }
Signature · 1 line
2.35.1
author maintainer
#64 lore raw

PATCH 64/338 hfs: Fix OOB Write in hfs_asc2mac

In reply to Greg Kroah-Hartman

From: ZhangPeng <[email protected]>

[ Upstream commit c53ed55cb275344086e32a7080a6b19cb183650b ]

Syzbot reported a OOB Write bug:

loop0: detected capacity change from 0 to 64
==================================================================

BUG: KASAN: slab-out-of-bounds in hfs_asc2mac+0x467/0x9a0
fs/hfs/trans.c:133
Write of size 1 at addr ffff88801848314e by task syz-executor391/3632

Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
 print_address_description+0x74/0x340 mm/kasan/report.c:284
 print_report+0x107/0x1f0 mm/kasan/report.c:395
 kasan_report+0xcd/0x100 mm/kasan/report.c:495
 hfs_asc2mac+0x467/0x9a0 fs/hfs/trans.c:133
 hfs_cat_build_key+0x92/0x170 fs/hfs/catalog.c:28
 hfs_lookup+0x1ab/0x2c0 fs/hfs/dir.c:31
 lookup_open fs/namei.c:3391 [inline]
 open_last_lookups fs/namei.c:3481 [inline]
 path_openat+0x10e6/0x2df0 fs/namei.c:3710
 do_filp_open+0x264/0x4f0 fs/namei.c:3740

If in->len is much larger than HFS_NAMELEN(31) which is the maximum length of an HFS filename, a OOB write could occur in hfs_asc2mac(). In that case, when the dst reaches the boundary, the srclen is still greater than 0, which causes a OOB write.
Fix this by adding a check on dstlen in while() before writing to dst address.

---
 fs/hfs/trans.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/hfs/trans.c +1 -1
index 39f5e343bf4d..fdb0edb8a607 100644
@@ -109,7 +109,7 @@ void hfs_asc2mac(struct super_block *sb, struct hfs_name *out, const struct qstr
 	if (nls_io) {
 		wchar_t ch;
 
-		while (srclen > 0) {
+		while (srclen > 0 && dstlen > 0) {
 			size = nls_io->char2uni(src, srclen, &ch);
 			if (size < 0) {
 				ch = '?';
Signature · 1 line
2.35.1
author maintainer
#65 lore raw

PATCH 65/338 rapidio: devices: fix missing put_device in mport_cdev_open

In reply to Greg Kroah-Hartman

From: Cai Xinchen <[email protected]>

[ Upstream commit d5b6e6eba3af11cb2a2791fa36a2524990fcde1a ]

When kfifo_alloc fails, the refcount of chdev->dev is left incremental. We should use put_device(&chdev->dev) to decrease the ref count of chdev->dev to avoid refcount leak.

Fixes e8de370188d0 ("rapidio: add mport char device driver")
Cc Alexandre Bounine <[email protected]>
Cc Dan Carpenter <[email protected]>
Cc Jakob Koschel <[email protected]>
Cc John Hubbard <[email protected]>
Cc Matt Porter <[email protected]>
Cc Wang Weiyang <[email protected]>
Cc Yang Yingliang <[email protected]>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/rapidio/devices/rio_mport_cdev.c +1 -0
index d6d223b63313..f5c062822de9 100644
@@ -1971,6 +1971,7 @@ static int mport_cdev_open(struct inode *inode, struct file *filp)
 			  sizeof(struct rio_event) * MPORT_EVENT_DEPTH,
 			  GFP_KERNEL);
 	if (ret < 0) {
+		put_device(&chdev->dev);
 		dev_err(&chdev->dev, DRV_NAME ": kfifo_alloc failed\n");
 		ret = -ENOMEM;
 		goto err_fifo;
Signature · 1 line
2.35.1
author maintainer
#66 lore raw

PATCH 66/338 wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()

In reply to Greg Kroah-Hartman

From: Fedor Pchelkin <[email protected]>

[ Upstream commit c2a94de38c74e86f49124ac14f093d6a5c377a90 ]

Syzkaller reports a long-known leak of urbs in
ath9k_hif_usb_dealloc_tx_urbs().

The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately.

The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes 03fb92a432ea ("ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()")
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 4 ----
 1 file changed, 4 deletions(-)
drivers/net/wireless/ath/ath9k/hif_usb.c +0 -4
index 8125f1752651..039f5d76685e 100644
@@ -779,14 +779,10 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_buf, list) {
-		usb_get_urb(tx_buf->urb);
-		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
-		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
-		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
Signature · 1 line
2.35.1
author maintainer
#67 lore raw

PATCH 67/338 wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()

In reply to Greg Kroah-Hartman

From: Fedor Pchelkin <[email protected]>

[ Upstream commit dd95f2239fc846795fc926787c3ae0ca701c9840 ]

It is possible that skb is freed in ath9k_htc_rx_msg(), then usb_submit_urb() fails and we try to free skb again. It causes use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes NULL but rx_buf is not freed and there can be a memory leak.

The patch removes unnecessary nskb and makes skb processing more clear: it is supposed that ath9k_htc_rx_msg() either frees old skb or passes its managing to another callback function.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 28 +++++++++++++-----------
 1 file changed, 15 insertions(+), 13 deletions(-)
drivers/net/wireless/ath/ath9k/hif_usb.c +15 -13
index 039f5d76685e..3ff78e9b06c2 100644
@@ -707,14 +707,13 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
 	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
 	struct sk_buff *skb = rx_buf->skb;
-	struct sk_buff *nskb;
 	int ret;
 
 	if (!skb)
 		return;
 
 	if (!hif_dev)
-		goto free;
+		goto free_skb;
 
 	switch (urb->status) {
 	case 0:
@@ -723,7 +722,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	case -ECONNRESET:
 	case -ENODEV:
 	case -ESHUTDOWN:
-		goto free;
+		goto free_skb;
 	default:
 		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
@@ -734,25 +733,27 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	if (likely(urb->actual_length != 0)) {
 		skb_put(skb, urb->actual_length);
 
-		/* Process the command first */
+		/*
+		 * Process the command first.
+		 * skb is either freed here or passed to be
+		 * managed to another callback function.
+		 */
 		ath9k_htc_rx_msg(hif_dev->htc_handle, skb,
 				 skb->len, USB_REG_IN_PIPE);
 
-
-		nskb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_ATOMIC);
-		if (!nskb) {
+		skb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_ATOMIC);
+		if (!skb) {
 			dev_err(&hif_dev->udev->dev,
 				"ath9k_htc: REG_IN memory allocation failure\n");
-			urb->context = NULL;
-			return;
+			goto free_rx_buf;
 		}
 
-		rx_buf->skb = nskb;
+		rx_buf->skb = skb;
 
 		usb_fill_int_urb(urb, hif_dev->udev,
 				 usb_rcvintpipe(hif_dev->udev,
 						 USB_REG_IN_PIPE),
-				 nskb->data, MAX_REG_IN_BUF_SIZE,
+				 skb->data, MAX_REG_IN_BUF_SIZE,
 				 ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 	}
 
@@ -761,12 +762,13 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
 	if (ret) {
 		usb_unanchor_urb(urb);
-		goto free;
+		goto free_skb;
 	}
 
 	return;
-free:
+free_skb:
 	kfree_skb(skb);
+free_rx_buf:
 	kfree(rx_buf);
 	urb->context = NULL;
 }
Signature · 1 line
2.35.1
author maintainer
#68 lore raw

PATCH 68/338 media: i2c: ad5820: Fix error path

In reply to Greg Kroah-Hartman

From: Ricardo Ribalda <[email protected]>

[ Upstream commit 9fce241660f37d9e95e93c0ae6fba8cfefa5797b ]

Error path seems to be swaped. Fix the order and provide some meaningful names.

Fixes bee3d5115611 ("[media] ad5820: Add driver for auto-focus coil")
---
 drivers/media/i2c/ad5820.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/media/i2c/ad5820.c +5 -5
index 034ebf754007..c2a6d1d5217a 100644
@@ -321,18 +321,18 @@ static int ad5820_probe(struct i2c_client *client,
 
 	ret = media_entity_pads_init(&coil->subdev.entity, 0, NULL);
 	if (ret < 0)
-		goto cleanup2;
+		goto clean_mutex;
 
 	ret = v4l2_async_register_subdev(&coil->subdev);
 	if (ret < 0)
-		goto cleanup;
+		goto clean_entity;
 
 	return ret;
 
-cleanup2:
-	mutex_destroy(&coil->power_lock);
-cleanup:
+clean_entity:
 	media_entity_cleanup(&coil->subdev.entity);
+clean_mutex:
+	mutex_destroy(&coil->power_lock);
 	return ret;
 }
 
Signature · 1 line
2.35.1
author maintainer
#69 lore raw

PATCH 69/338 spi: Update reference to struct spi_controller

In reply to Greg Kroah-Hartman

From: Jonathan Neuschäfer <[email protected]>

[ Upstream commit bf585ccee22faf469d82727cf375868105b362f7 ]

struct spi_master has been renamed to struct spi_controller. Update the reference in spi.rst to make it clickable again.

Fixes 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
---
 Documentation/driver-api/spi.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/driver-api/spi.rst +2 -2
index f64cb666498a..f28887045049 100644
@@ -25,8 +25,8 @@ hardware, which may be as simple as a set of GPIO pins or as complex as
 a pair of FIFOs connected to dual DMA engines on the other side of the
 SPI shift register (maximizing throughput). Such drivers bridge between
 whatever bus they sit on (often the platform bus) and SPI, and expose
-the SPI side of their device as a :c:type:`struct spi_master
-<spi_master>`. SPI devices are children of that master,
+the SPI side of their device as a :c:type:`struct spi_controller
+<spi_controller>`. SPI devices are children of that master,
 represented as a :c:type:`struct spi_device <spi_device>` and
 manufactured from :c:type:`struct spi_board_info
 <spi_board_info>` descriptors which are usually provided by
Signature · 1 line
2.35.1
author maintainer
#70 lore raw

PATCH 70/338 media: vivid: fix compose size exceed boundary

In reply to Greg Kroah-Hartman

From: Liu Shixin <[email protected]>

[ Upstream commit 94a7ad9283464b75b12516c5512541d467cefcf8 ]

syzkaller found a bug:

 BUG: unable to handle page fault for address: ffffc9000a3b1000
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 100000067 P4D 100000067 PUD 10015f067 PMD 1121ca067 PTE 0
 Oops: 0002 [#1] PREEMPT SMP
 CPU: 0 PID: 23489 Comm: vivid-000-vid-c Not tainted 6.1.0-rc1+ #512
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
 RIP: 0010:memcpy_erms+0x6/0x10
[...]
 Call Trace:
  <TASK>
  ? tpg_fill_plane_buffer+0x856/0x15b0
  vivid_fillbuff+0x8ac/0x1110
  vivid_thread_vid_cap_tick+0x361/0xc90
  vivid_thread_vid_cap+0x21a/0x3a0
  kthread+0x143/0x180
  ret_from_fork+0x1f/0x30
  </TASK>

This is because we forget to check boundary after adjust compose->height int V4L2_SEL_TGT_CROP case. Add v4l2_rect_map_inside() to fix this problem for this case.

Fixes ef834f7836ec ("[media] vivid: add the video capture and output parts")
---
 drivers/media/platform/vivid/vivid-vid-cap.c | 1 +
 1 file changed, 1 insertion(+)
drivers/media/platform/vivid/vivid-vid-cap.c +1 -0
index 459cff1626a6..bcc2170f2dff 100644
@@ -938,6 +938,7 @@ int vivid_vid_cap_s_selection(struct file *file, void *fh, struct v4l2_selection
 			if (dev->has_compose_cap) {
 				v4l2_rect_set_min_size(compose, &min_rect);
 				v4l2_rect_set_max_size(compose, &max_rect);
+				v4l2_rect_map_inside(compose, &fmt);
 			}
 			dev->fmt_cap_rect = fmt;
 			tpg_s_buf_height(&dev->tpg, fmt.height);
Signature · 1 line
2.35.1
author maintainer
#71 lore raw

PATCH 71/338 mtd: Fix device name leak when register device failed in add_mtd_device()

In reply to Greg Kroah-Hartman

From: Zhang Xiaoxu <[email protected]>

[ Upstream commit 895d68a39481a75c680aa421546931fb11942fa6 ]

There is a kmemleak when register device failed:
unreferenced object 0xffff888101aab550 (size 8):

    comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s)
    hex dump (first 8 bytes):
      6d 74 64 30 00 88 ff ff                          mtd0....
    backtrace:
      [<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
      [<000000003c32b416>] kvasprintf+0xb0/0x130
      [<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
      [<000000006e781163>] dev_set_name+0xab/0xe0
      [<00000000e30d0c78>] add_mtd_device+0x4bb/0x700
      [<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
      [<00000000c0d88488>] 0xffffffffa0238457
      [<00000000b40d0922>] 0xffffffffa02a008f
      [<0000000023d17b9d>] do_one_initcall+0x87/0x2a0
      [<00000000770f6ca6>] do_init_module+0xdf/0x320
      [<000000007b6768fe>] load_module+0x2f98/0x3330
      [<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
      [<00000000674c2290>] do_syscall_64+0x35/0x80
      [<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

If register device failed, should call put_device() to give up the reference.

---
 drivers/mtd/mtdcore.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mtd/mtdcore.c +3 -1
index e7ea842ba3db..912b09f5d066 100644
@@ -552,8 +552,10 @@ int add_mtd_device(struct mtd_info *mtd)
 	dev_set_drvdata(&mtd->dev, mtd);
 	of_node_get(mtd_get_of_node(mtd));
 	error = device_register(&mtd->dev);
-	if (error)
+	if (error) {
+		put_device(&mtd->dev);
 		goto fail_added;
+	}
 
 	if (!IS_ERR_OR_NULL(dfs_dir_mtd)) {
 		mtd->dbg.dfs_dir = debugfs_create_dir(dev_name(&mtd->dev), dfs_dir_mtd);
Signature · 1 line
2.35.1
author maintainer
#72 lore raw

PATCH 72/338 media: camss: Clean up received buffers on failed start of streaming

In reply to Greg Kroah-Hartman

From: Vladimir Zapolskiy <[email protected]>

[ Upstream commit c8f3582345e6a69da65ab588f7c4c2d1685b0e80 ]

It is required to return the received buffers, if streaming can not be started. For instance media_pipeline_start() may fail with EPIPE, if a link validation between entities is not passed, and in such a case a user gets a kernel warning:

  WARNING: CPU: 1 PID: 520 at drivers/media/common/videobuf2/videobuf2-core.c:1592 vb2_start_streaming+0xec/0x160
  <snip>
  Call trace:
   vb2_start_streaming+0xec/0x160
   vb2_core_streamon+0x9c/0x1a0
   vb2_ioctl_streamon+0x68/0xbc
   v4l_streamon+0x30/0x3c
   __video_do_ioctl+0x184/0x3e0
   video_usercopy+0x37c/0x7b0
   video_ioctl2+0x24/0x40
   v4l2_ioctl+0x4c/0x70

The fix is to correct the error path in video_start_streaming() of camss.

Fixes 0ac2586c410f ("media: camss: Add files which handle the video device nodes")
---
 drivers/media/platform/qcom/camss-8x16/camss-video.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/platform/qcom/camss-8x16/camss-video.c +2 -1
index cf4219e871bd..53a0df638324 100644
@@ -353,7 +353,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
 
 	ret = media_pipeline_start(&vdev->entity, &video->pipe);
 	if (ret < 0)
-		return ret;
+		goto flush_buffers;
 
 	ret = video_check_format(video);
 	if (ret < 0)
@@ -382,6 +382,7 @@ static int video_start_streaming(struct vb2_queue *q, unsigned int count)
 error:
 	media_pipeline_stop(&vdev->entity);
 
+flush_buffers:
 	video->ops->flush_buffers(video, VB2_BUF_STATE_QUEUED);
 
 	return ret;
Signature · 1 line
2.35.1
author maintainer
#73 lore raw

PATCH 73/338 drm/radeon: Add the missed acpi_put_table() to fix memory leak

In reply to Greg Kroah-Hartman

From: Hanjun Guo <[email protected]>

[ Upstream commit 10276a20be1115e1f76c189330da2992df980eee ]

When the radeon driver reads the bios information from ACPI table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table() to release the ACPI memory after the init, so add acpi_put_table() properly to fix the memory leak.

v2: fix text formatting (Alex)

Fixes 268ba0a99f89 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
---
 drivers/gpu/drm/radeon/radeon_bios.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
drivers/gpu/drm/radeon/radeon_bios.c +11 -7
index 04c0ed41374f..80562aeb8149 100644
@@ -600,13 +600,14 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
 	acpi_size tbl_size;
 	UEFI_ACPI_VFCT *vfct;
 	unsigned offset;
+	bool r = false;
 
 	if (!ACPI_SUCCESS(acpi_get_table("VFCT", 1, &hdr)))
 		return false;
 	tbl_size = hdr->length;
 	if (tbl_size < sizeof(UEFI_ACPI_VFCT)) {
 		DRM_ERROR("ACPI VFCT table present but broken (too short #1)\n");
-		return false;
+		goto out;
 	}
 
 	vfct = (UEFI_ACPI_VFCT *)hdr;
@@ -619,13 +620,13 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
 		offset += sizeof(VFCT_IMAGE_HEADER);
 		if (offset > tbl_size) {
 			DRM_ERROR("ACPI VFCT image header truncated\n");
-			return false;
+			goto out;
 		}
 
 		offset += vhdr->ImageLength;
 		if (offset > tbl_size) {
 			DRM_ERROR("ACPI VFCT image truncated\n");
-			return false;
+			goto out;
 		}
 
 		if (vhdr->ImageLength &&
@@ -637,15 +638,18 @@ static bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
 			rdev->bios = kmemdup(&vbios->VbiosContent,
 					     vhdr->ImageLength,
 					     GFP_KERNEL);
+			if (rdev->bios)
+				r = true;
 
-			if (!rdev->bios)
-				return false;
-			return true;
+			goto out;
 		}
 	}
 
 	DRM_ERROR("ACPI VFCT table present but broken (too short #2)\n");
-	return false;
+
+out:
+	acpi_put_table(hdr);
+	return r;
 }
 #else
 static inline bool radeon_acpi_vfct_bios(struct radeon_device *rdev)
Signature · 1 line
2.35.1
author maintainer
#74 lore raw

PATCH 74/338 ASoC: pxa: fix null-pointer dereference in filter()

In reply to Greg Kroah-Hartman

From: Zeng Heng <[email protected]>

[ Upstream commit ec7bf231aaa1bdbcb69d23bc50c753c80fb22429 ]

kasprintf() would return NULL pointer when kmalloc() fail to allocate. Need to check the return pointer before calling strcmp().

Fixes 7a824e214e25 ("ASoC: mmp: add audio dma support")
---
 sound/soc/pxa/mmp-pcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/pxa/mmp-pcm.c +1 -1
index 624d9bd5dadd..609843f607a3 100644
@@ -88,7 +88,7 @@ static bool filter(struct dma_chan *chan, void *param)
 
 	devname = kasprintf(GFP_KERNEL, "%s.%d", dma_data->dma_res->name,
 		dma_data->ssp_id);
-	if ((strcmp(dev_name(chan->device->dev), devname) == 0) &&
+	if (devname && (strcmp(dev_name(chan->device->dev), devname) == 0) &&
 		(chan->chan_id == dma_data->dma_res->start)) {
 		found = true;
 	}
Signature · 1 line
2.35.1
author maintainer
#75 lore raw

PATCH 75/338 regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit f2b41b748c19962b82709d9f23c6b2b0ce9d2f91 ]

I got the the following report:

OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/pmic@62/regulators/exten

In of_get_regulator(), the node is returned from of_parse_phandle() with refcount incremented, after using it, of_node_put() need be called.

Fixes 69511a452e6d ("regulator: map consumer regulator based on device tree")
---
 drivers/regulator/core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/regulator/core.c +1 -0
index ce5162ef9216..d6cd8e6e69cf 100644
@@ -1478,6 +1478,7 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 		node = of_get_regulator(dev, supply);
 		if (node) {
 			r = of_find_regulator_by_node(node);
+			of_node_put(node);
 			if (r)
 				return r;
 
Signature · 1 line
2.35.1
author maintainer
#76 lore raw

PATCH 76/338 ima: Fix misuse of dereference of pointer in template_desc_init_fields()

In reply to Greg Kroah-Hartman

From: Xiu Jianfeng <[email protected]>

[ Upstream commit 25369175ce84813dd99d6604e710dc2491f68523 ]

The input parameter @fields is type of struct ima_template_field ***, so when allocates array memory for @fields, the size of element should be sizeof(**field) instead of sizeof(*field).

Actually the original code would not cause any runtime error, but it's better to make it logically right.

Fixes adf53a778a0a ("ima: new templates management mechanism")
---
 security/integrity/ima/ima_template.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
security/integrity/ima/ima_template.c +2 -2
index 8687882277a1..ff49f9292931 100644
@@ -196,11 +196,11 @@ static int template_desc_init_fields(const char *template_fmt,
 	}
 
 	if (fields && num_fields) {
-		*fields = kmalloc_array(i, sizeof(*fields), GFP_KERNEL);
+		*fields = kmalloc_array(i, sizeof(**fields), GFP_KERNEL);
 		if (*fields == NULL)
 			return -ENOMEM;
 
-		memcpy(*fields, found_fields, i * sizeof(*fields));
+		memcpy(*fields, found_fields, i * sizeof(**fields));
 		*num_fields = i;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#77 lore raw

PATCH 77/338 wifi: ath10k: Fix return value in ath10k_pci_init()

In reply to Greg Kroah-Hartman

From: Xiu Jianfeng <[email protected]>

[ Upstream commit 2af7749047d8d6ad43feff69f555a13a6a6c2831 ]

This driver is attempting to register to support two different buses. if either of these is successful then ath10k_pci_init() should return 0 so that hardware attached to the successful bus can be probed and supported. only if both of these are unsuccessful should ath10k_pci_init() return an errno.

Fixes 0b523ced9a3c ("ath10k: add basic skeleton to support ahb")
---
 drivers/net/wireless/ath/ath10k/pci.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/pci.c +12 -8
index f9e409caca68..07457eb9d455 100644
@@ -3443,18 +3443,22 @@ static struct pci_driver ath10k_pci_driver = {
 
 static int __init ath10k_pci_init(void)
 {
-	int ret;
+	int ret1, ret2;
 
-	ret = pci_register_driver(&ath10k_pci_driver);
-	if (ret)
+	ret1 = pci_register_driver(&ath10k_pci_driver);
+	if (ret1)
 		printk(KERN_ERR "failed to register ath10k pci driver: %d\n",
-		       ret);
+		       ret1);
 
-	ret = ath10k_ahb_init();
-	if (ret)
-		printk(KERN_ERR "ahb init failed: %d\n", ret);
+	ret2 = ath10k_ahb_init();
+	if (ret2)
+		printk(KERN_ERR "ahb init failed: %d\n", ret2);
 
-	return ret;
+	if (ret1 && ret2)
+		return ret1;
+
+	/* registered to at least one bus */
+	return 0;
 }
 module_init(ath10k_pci_init);
 
Signature · 1 line
2.35.1
author maintainer
#78 lore raw

PATCH 78/338 mtd: lpddr2_nvm: Fix possible null-ptr-deref

In reply to Greg Kroah-Hartman

From: Hui Tang <[email protected]>

[ Upstream commit 6bdd45d795adf9e73b38ced5e7f750cd199499ff ]

It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL.

Fixes 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
---
 drivers/mtd/lpddr/lpddr2_nvm.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/mtd/lpddr/lpddr2_nvm.c +2 -0
index 5e36366d9b36..19b00225c7ef 100644
@@ -448,6 +448,8 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 
 	/* lpddr2_nvm address range */
 	add_range = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!add_range)
+		return -ENODEV;
 
 	/* Populate map_info data structure */
 	*map = (struct map_info) {
Signature · 1 line
2.35.1
author maintainer
#79 lore raw

PATCH 79/338 Input: elants_i2c - properly handle the reset GPIO when power is off

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ]

As can be seen in elants_i2c_power_off(), we want the reset GPIO asserted when power is off. The reset GPIO is active low so we need the reset line logic low when power is off to avoid leakage.

We have a problem, though, at probe time. At probe time we haven't powered the regulators on yet but we have:

  devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);

While that _looks_ right, it turns out that it's not. The GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the GPIO to "not asserted". Since this is an active low GPIO that inits it to be high.

Let's fix this to properly init the GPIO. Now after both probe and power off the state of the GPIO is consistent (it's "asserted" or level low).

Once we fix this, we can see that at power on time we no longer to assert the reset GPIO as the first thing. The reset GPIO is _always_ asserted before powering on. Let's fix powering on to account for this.

---
 drivers/input/touchscreen/elants_i2c.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/input/touchscreen/elants_i2c.c +3 -6
index fd48fb6ef210..dc8eddefe7b0 100644
@@ -1089,14 +1089,12 @@ static int elants_i2c_power_on(struct elants_data *ts)
 	if (IS_ERR_OR_NULL(ts->reset_gpio))
 		return 0;
 
-	gpiod_set_value_cansleep(ts->reset_gpio, 1);
-
 	error = regulator_enable(ts->vcc33);
 	if (error) {
 		dev_err(&ts->client->dev,
 			"failed to enable vcc33 regulator: %d\n",
 			error);
-		goto release_reset_gpio;
+		return error;
 	}
 
 	error = regulator_enable(ts->vccio);
@@ -1105,7 +1103,7 @@ static int elants_i2c_power_on(struct elants_data *ts)
 			"failed to enable vccio regulator: %d\n",
 			error);
 		regulator_disable(ts->vcc33);
-		goto release_reset_gpio;
+		return error;
 	}
 
 	/*
@@ -1114,7 +1112,6 @@ static int elants_i2c_power_on(struct elants_data *ts)
 	 */
 	udelay(ELAN_POWERON_DELAY_USEC);
 
-release_reset_gpio:
 	gpiod_set_value_cansleep(ts->reset_gpio, 0);
 	if (error)
 		return error;
@@ -1222,7 +1219,7 @@ static int elants_i2c_probe(struct i2c_client *client,
 		return error;
 	}
 
-	ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+	ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ts->reset_gpio)) {
 		error = PTR_ERR(ts->reset_gpio);
 
Signature · 1 line
2.35.1
author maintainer
#80 lore raw

PATCH 80/338 media: solo6x10: fix possible memory leak in solo_sysfs_init()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 7f5866dd96d95b74e439f6ee17b8abd8195179fb ]

If device_register() returns error in solo_sysfs_init(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup().

Fixes dcae5dacbce5 ("[media] solo6x10: sync to latest code from Bluecherry's git repo")
---
 drivers/media/pci/solo6x10/solo6x10-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/media/pci/solo6x10/solo6x10-core.c +1 -0
index ca0873e47bea..a654cc5ddecd 100644
@@ -428,6 +428,7 @@ static int solo_sysfs_init(struct solo_dev *solo_dev)
 		     solo_dev->nr_chans);
 
 	if (device_register(dev)) {
+		put_device(dev);
 		dev->parent = NULL;
 		return -ENOMEM;
 	}
Signature · 1 line
2.35.1
author maintainer
#81 lore raw

PATCH 81/338 media: platform: exynos4-is: Fix error handling in fimc_md_init()

In reply to Greg Kroah-Hartman

From: Yuan Can <[email protected]>

[ Upstream commit b434422c45282a0573d8123239abc41fa72665d4 ]

A problem about modprobe s5p_fimc failed is triggered with the following log given:

 [  272.075275] Error: Driver 'exynos4-fimc' is already registered, aborting...
 modprobe: ERROR: could not insert 's5p_fimc': Device or resource busy

The reason is that fimc_md_init() returns platform_driver_register() directly without checking its return value, if platform_driver_register() failed, it returns without unregister fimc_driver, resulting the s5p_fimc can never be installed later.
A simple call graph is shown as below:

fimc_md_init()
fimc_register_driver() # register fimc_driver
platform_driver_register()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened

   # return without unregister fimc_driver

Fix by unregister fimc_driver when platform_driver_register() returns error.

Fixes d3953223b090 ("[media] s5p-fimc: Add the media device driver")
---
 drivers/media/platform/exynos4-is/fimc-core.c | 2 +-
 drivers/media/platform/exynos4-is/media-dev.c | 6 +++++-
 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/media/platform/exynos4-is/fimc-core.c +1 -1
index 099c735a39b7..5099cc1481e3 100644
@@ -1255,7 +1255,7 @@ int __init fimc_register_driver(void)
 	return platform_driver_register(&fimc_driver);
 }
 
-void __exit fimc_unregister_driver(void)
+void fimc_unregister_driver(void)
 {
 	platform_driver_unregister(&fimc_driver);
 }
drivers/media/platform/exynos4-is/media-dev.c +5 -1
index 24fb0f4b95e1..785b8f0a39ca 100644
@@ -1561,7 +1561,11 @@ static int __init fimc_md_init(void)
 	if (ret)
 		return ret;
 
-	return platform_driver_register(&fimc_md_driver);
+	ret = platform_driver_register(&fimc_md_driver);
+	if (ret)
+		fimc_unregister_driver();
+
+	return ret;
 }
 
 static void __exit fimc_md_exit(void)
Signature · 1 line
2.35.1
author maintainer
#82 lore raw

PATCH 82/338 HID: hid-sensor-custom: set fixed size for custom attributes

In reply to Greg Kroah-Hartman

From: Marcus Folkesson <[email protected]>

[ Upstream commit 9d013910df22de91333a0acc81d1dbb115bd76f6 ]

This is no bugfix (so no Fixes: tag is necessary) as it is taken care of in hid_sensor_custom_add_attributes().

The motivation for this patch is that:
hid_sensor_custom_field.attr_name and hid_sensor_custom_field.attrs
has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.

We compare against HID_CUSTOM_TOTAL_ATTRS when
looping through hid_custom_attrs.

We will silent the smatch error:
hid_sensor_custom_add_attributes() error: buffer overflow 'hid_custom_attrs' 8 <= 10

---
 drivers/hid/hid-sensor-custom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/hid-sensor-custom.c +1 -1
index 574126b649e9..4aa8ae62155b 100644
@@ -67,7 +67,7 @@ struct hid_sensor_sample {
 	u32 raw_len;
 } __packed;
 
-static struct attribute hid_custom_attrs[] = {
+static struct attribute hid_custom_attrs[HID_CUSTOM_TOTAL_ATTRS] = {
 	{.name = "name", .mode = S_IRUGO},
 	{.name = "units", .mode = S_IRUGO},
 	{.name = "unit-expo", .mode = S_IRUGO},
Signature · 1 line
2.35.1
author maintainer
#83 lore raw

PATCH 83/338 ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT

In reply to Greg Kroah-Hartman

From: Baisong Zhong <[email protected]>

[ Upstream commit cf59e1e4c79bf741905484cdb13c130b53576a16 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in sound/core/seq/seq_clientmgr.c:509:22
left shift of 1 by 31 places cannot be represented in type 'int'
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x8d/0xcf
 ubsan_epilogue+0xa/0x44
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208
 snd_seq_deliver_single_event.constprop.21+0x191/0x2f0
 snd_seq_deliver_event+0x1a2/0x350
 snd_seq_kernel_client_dispatch+0x8b/0xb0
 snd_seq_client_notify_subscription+0x72/0xa0
 snd_seq_ioctl_subscribe_port+0x128/0x160
 snd_seq_kernel_client_ctl+0xce/0xf0
 snd_seq_oss_create_client+0x109/0x15b
 alsa_seq_oss_init+0x11c/0x1aa
 do_one_initcall+0x80/0x440
 kernel_init_freeable+0x370/0x3c3
 kernel_init+0x1b/0x190
 ret_from_fork+0x1f/0x30
 </TASK>
---
 include/uapi/sound/asequencer.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
include/uapi/sound/asequencer.h +4 -4
index a75e14edc957..dbd60f48b4b0 100644
@@ -344,10 +344,10 @@ typedef int __bitwise snd_seq_client_type_t;
 #define	KERNEL_CLIENT	((__force snd_seq_client_type_t) 2)
                         
 	/* event filter flags */
-#define SNDRV_SEQ_FILTER_BROADCAST	(1<<0)	/* accept broadcast messages */
-#define SNDRV_SEQ_FILTER_MULTICAST	(1<<1)	/* accept multicast messages */
-#define SNDRV_SEQ_FILTER_BOUNCE		(1<<2)	/* accept bounce event in error */
-#define SNDRV_SEQ_FILTER_USE_EVENT	(1<<31)	/* use event filter */
+#define SNDRV_SEQ_FILTER_BROADCAST	(1U<<0)	/* accept broadcast messages */
+#define SNDRV_SEQ_FILTER_MULTICAST	(1U<<1)	/* accept multicast messages */
+#define SNDRV_SEQ_FILTER_BOUNCE		(1U<<2)	/* accept bounce event in error */
+#define SNDRV_SEQ_FILTER_USE_EVENT	(1U<<31)	/* use event filter */
 
 struct snd_seq_client_info {
 	int client;			/* client number to inquire */
Signature · 1 line
2.35.1
author maintainer
#84 lore raw

PATCH 84/338 clk: rockchip: Fix memory leak in rockchip_clk_register_pll()

In reply to Greg Kroah-Hartman

From: Xiu Jianfeng <[email protected]>

[ Upstream commit 739a6a6bbdb793bd57938cb24aa5a6df89983546 ]

If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

Fixes 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
---
 drivers/clk/rockchip/clk-pll.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/rockchip/clk-pll.c +1 -0
index dd0433d4753e..77aff5defac6 100644
@@ -972,6 +972,7 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
 	return mux_clk;
 
 err_pll:
+	kfree(pll->rate_table);
 	clk_unregister(mux_clk);
 	mux_clk = pll_clk;
 err_mux:
Signature · 1 line
2.35.1
author maintainer
#85 lore raw

PATCH 85/338 mtd: maps: pxa2xx-flash: fix memory leak in probe

In reply to Greg Kroah-Hartman

From: Zheng Yongjun <[email protected]>

[ Upstream commit 2399401feee27c639addc5b7e6ba519d3ca341bf ]

Free 'info' upon remapping error to avoid a memory leak.

Fixes e644f7d62894 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver")
[<[email protected]>: Reword the commit log]
---
 drivers/mtd/maps/pxa2xx-flash.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/mtd/maps/pxa2xx-flash.c +2 -0
index 2cde28ed95c9..59d2fe1f46e1 100644
@@ -69,6 +69,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev)
 	if (!info->map.virt) {
 		printk(KERN_WARNING "Failed to ioremap %s\n",
 		       info->map.name);
+		kfree(info);
 		return -ENOMEM;
 	}
 	info->map.cached =
@@ -91,6 +92,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev)
 		iounmap((void *)info->map.virt);
 		if (info->map.cached)
 			iounmap(info->map.cached);
+		kfree(info);
 		return -EIO;
 	}
 	info->mtd->dev.parent = &pdev->dev;
Signature · 1 line
2.35.1
author maintainer
#86 lore raw

PATCH 86/338 media: imon: fix a race condition in send_packet()

In reply to Greg Kroah-Hartman

From: Gautam Menghani <[email protected]>

[ Upstream commit 813ceef062b53d68f296aa3cb944b21a091fabdb ]

The function send_packet() has a race condition as follows:

func send_packet()
{
// do work
call usb_submit_urb()
mutex_unlock()
wait_for_event_interruptible() <-- lock gone
mutex_lock()
}

func vfd_write()
{
mutex_lock()
call send_packet() <- prev call is not completed mutex_unlock()
}

When the mutex is unlocked and the function send_packet() waits for the call to complete, vfd_write() can start another call, which leads to the "URB submitted while active" warning in usb_submit_urb(). Fix this by removing the mutex_unlock() call in send_packet() and using mutex_lock_interruptible().

Fixes 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Reported-by [email protected]
---
 drivers/media/rc/imon.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/media/rc/imon.c +3 -3
index edf8a7a76e86..50951c31ff5b 100644
@@ -637,15 +637,14 @@ static int send_packet(struct imon_context *ictx)
 		pr_err_ratelimited("error submitting urb(%d)\n", retval);
 	} else {
 		/* Wait for transmission to complete (or abort) */
-		mutex_unlock(&ictx->lock);
 		retval = wait_for_completion_interruptible(
 				&ictx->tx.finished);
 		if (retval) {
 			usb_kill_urb(ictx->tx_urb);
 			pr_err_ratelimited("task interrupted\n");
 		}
-		mutex_lock(&ictx->lock);
 
+		ictx->tx.busy = false;
 		retval = ictx->tx.status;
 		if (retval)
 			pr_err_ratelimited("packet tx failed (%d)\n", retval);
@@ -952,7 +951,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 		return -ENODEV;
 	}
 
-	mutex_lock(&ictx->lock);
+	if (mutex_lock_interruptible(&ictx->lock))
+		return -ERESTARTSYS;
 
 	if (!ictx->dev_present_intf0) {
 		pr_err_ratelimited("no iMON device present\n");
Signature · 1 line
2.35.1
author maintainer
#87 lore raw

PATCH 87/338 pinctrl: pinconf-generic: add missing of_node_put()

In reply to Greg Kroah-Hartman

From: ZhangPeng <[email protected]>

[ Upstream commit 5ead93289815a075d43c415e35c8beafafb801c9 ]

of_node_put() needs to be called when jumping out of the loop, since for_each_available_child_of_node() will increase the refcount of node.

Fixes c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node")
---
 drivers/pinctrl/pinconf-generic.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pinctrl/pinconf-generic.c +3 -1
index 6f6fd5e6b68c..07e29fc7443d 100644
@@ -388,8 +388,10 @@ int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
 	for_each_available_child_of_node(np_config, np) {
 		ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
 					&reserved_maps, num_maps, type);
-		if (ret < 0)
+		if (ret < 0) {
+			of_node_put(np);
 			goto exit;
+		}
 	}
 	return 0;
 
Signature · 1 line
2.35.1
author maintainer
#88 lore raw

PATCH 88/338 media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()

In reply to Greg Kroah-Hartman

From: Baisong Zhong <[email protected]>

[ Upstream commit 0ed554fd769a19ea8464bb83e9ac201002ef74ad ]

Wei Chen reports a kernel bug as blew:

general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded

In az6027_i2c_xfer(), if msg[i].addr is 0x99, a null-ptr-deref will caused when accessing msg[i].buf. For msg[i].len is 0 and msg[i].buf is null.

Fix this by checking msg[i].len in az6027_i2c_xfer().

---
 drivers/media/usb/dvb-usb/az6027.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/media/usb/dvb-usb/az6027.c +4 -0
index 382c8075ef52..f2b5ba1d2809 100644
@@ -978,6 +978,10 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 		if (msg[i].addr == 0x99) {
 			req = 0xBE;
 			index = 0;
+			if (msg[i].len < 1) {
+				i = -EOPNOTSUPP;
+				break;
+			}
 			value = msg[i].buf[0] & 0x00ff;
 			length = 1;
 			az6027_usb_out_op(d, req, value, index, data, length);
Signature · 1 line
2.35.1
author maintainer
#89 lore raw

PATCH 89/338 media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC

In reply to Greg Kroah-Hartman

From: Aakarsh Jain <[email protected]>

[ Upstream commit f50ebe10f5d8092c37e2bd430c78e03bf38b1e20 ]

Commit 5441e9dafdfc6dc40 ("[media] s5p-mfc: Core support for MFC v7") which adds mfc v7 support for Exynos3250 and use the same compatible string as used by Exynos5240 but both the IPs are a bit different in terms of IP clock.
Add variant driver data based on the new compatible string "samsung,exynos3250-mfc" for Exynos3250 SoC.

Fixes 5441e9dafdfc ("[media] s5p-mfc: Core support for MFC v7")
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
drivers/media/platform/s5p-mfc/s5p_mfc.c +15 -2
index 75be40608bae..5cbb3151004f 100644
@@ -1582,8 +1582,18 @@ static struct s5p_mfc_variant mfc_drvdata_v7 = {
 	.port_num	= MFC_NUM_PORTS_V7,
 	.buf_size	= &buf_size_v7,
 	.fw_name[0]     = "s5p-mfc-v7.fw",
-	.clk_names	= {"mfc", "sclk_mfc"},
-	.num_clocks	= 2,
+	.clk_names	= {"mfc"},
+	.num_clocks	= 1,
+};
+
+static struct s5p_mfc_variant mfc_drvdata_v7_3250 = {
+	.version        = MFC_VERSION_V7,
+	.version_bit    = MFC_V7_BIT,
+	.port_num       = MFC_NUM_PORTS_V7,
+	.buf_size       = &buf_size_v7,
+	.fw_name[0]     = "s5p-mfc-v7.fw",
+	.clk_names      = {"mfc", "sclk_mfc"},
+	.num_clocks     = 2,
 };
 
 static struct s5p_mfc_buf_size_v6 mfc_buf_size_v8 = {
@@ -1630,6 +1640,9 @@ static const struct of_device_id exynos_mfc_match[] = {
 	}, {
 		.compatible = "samsung,mfc-v7",
 		.data = &mfc_drvdata_v7,
+	}, {
+		.compatible = "samsung,exynos3250-mfc",
+		.data = &mfc_drvdata_v7_3250,
 	}, {
 		.compatible = "samsung,mfc-v8",
 		.data = &mfc_drvdata_v8,
Signature · 1 line
2.35.1
author maintainer
#90 lore raw

PATCH 90/338 NFSv4.2: Fix a memory stomp in decode_attr_security_label

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 43c1031f7110967c240cb6e922adcfc4b8899183 ]

We must not change the value of label->len if it is zero, since that indicates we stored a label.

Fixes b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
---
 fs/nfs/nfs4xdr.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
fs/nfs/nfs4xdr.c +4 -6
index ccdc0ca699c3..e604c0e02f4d 100644
@@ -4255,12 +4255,10 @@ static int decode_attr_security_label(struct xdr_stream *xdr, uint32_t *bitmap,
 		if (unlikely(!p))
 			goto out_overflow;
 		if (len < NFS4_MAXLABELLEN) {
-			if (label) {
-				if (label->len) {
-					if (label->len < len)
-						return -ERANGE;
-					memcpy(label->label, p, len);
-				}
+			if (label && label->len) {
+				if (label->len < len)
+					return -ERANGE;
+				memcpy(label->label, p, len);
 				label->len = len;
 				label->pi = pi;
 				label->lfs = lfs;
Signature · 1 line
2.35.1
author maintainer
#91 lore raw

PATCH 91/338 NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 51069e4aef6257b0454057359faed0ab0c9af083 ]

If we're asked to recover open state while a delegation return is outstanding, then the state manager thread cannot use a cached open, so if the server returns a delegation, we can end up deadlocked behind the pending delegreturn.
To avoid this problem, let's just ask the server not to give us a delegation unless we're explicitly reclaiming one.

Fixes be36e185bd26 ("NFSv4: nfs4_open_recover_helper() must set share access")
---
 fs/nfs/nfs4proc.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
fs/nfs/nfs4proc.c +12 -7
index 11d36763f256..ff41d726f758 100644
@@ -1832,18 +1832,18 @@ static struct nfs4_opendata *nfs4_open_recoverdata_alloc(struct nfs_open_context
 }
 
 static int nfs4_open_recover_helper(struct nfs4_opendata *opendata,
-		fmode_t fmode)
+				    fmode_t fmode)
 {
 	struct nfs4_state *newstate;
+	struct nfs_server *server = NFS_SB(opendata->dentry->d_sb);
+	int openflags = opendata->o_arg.open_flags;
 	int ret;
 
 	if (!nfs4_mode_match_open_stateid(opendata->state, fmode))
 		return 0;
-	opendata->o_arg.open_flags = 0;
 	opendata->o_arg.fmode = fmode;
-	opendata->o_arg.share_access = nfs4_map_atomic_open_share(
-			NFS_SB(opendata->dentry->d_sb),
-			fmode, 0);
+	opendata->o_arg.share_access =
+		nfs4_map_atomic_open_share(server, fmode, openflags);
 	memset(&opendata->o_res, 0, sizeof(opendata->o_res));
 	memset(&opendata->c_res, 0, sizeof(opendata->c_res));
 	nfs4_init_opendata_res(opendata);
@@ -2418,10 +2418,15 @@ static int _nfs4_open_expired(struct nfs_open_context *ctx, struct nfs4_state *s
 	struct nfs4_opendata *opendata;
 	int ret;
 
-	opendata = nfs4_open_recoverdata_alloc(ctx, state,
-			NFS4_OPEN_CLAIM_FH);
+	opendata = nfs4_open_recoverdata_alloc(ctx, state, NFS4_OPEN_CLAIM_FH);
 	if (IS_ERR(opendata))
 		return PTR_ERR(opendata);
+	/*
+	 * We're not recovering a delegation, so ask for no delegation.
+	 * Otherwise the recovery thread could deadlock with an outstanding
+	 * delegation return.
+	 */
+	opendata->o_arg.open_flags = O_DIRECT;
 	ret = nfs4_open_recover(opendata, state);
 	if (ret == -ESTALE)
 		d_drop(ctx->dentry);
Signature · 1 line
2.35.1
author maintainer
#92 lore raw

PATCH 92/338 ALSA: asihpi: fix missing pci_disable_device()

In reply to Greg Kroah-Hartman

From: Liu Shixin <[email protected]>

[ Upstream commit 9d86515c3d4c0564a0c31a2df87d735353a1971e ]

pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release().

Fixes 3285ea10e9b0 ("ALSA: asihpi - Interrelated HPI tidy up.")
---
 sound/pci/asihpi/hpioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/asihpi/hpioctl.c +1 -1
index b4ccd9f92400..81f240472943 100644
@@ -359,7 +359,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev,
 		pci_dev->device, pci_dev->subsystem_vendor,
 		pci_dev->subsystem_device, pci_dev->devfn);
 
-	if (pci_enable_device(pci_dev) < 0) {
+	if (pcim_enable_device(pci_dev) < 0) {
 		dev_err(&pci_dev->dev,
 			"pci_enable_device failed, disabling device\n");
 		return -EIO;
Signature · 1 line
2.35.1
author maintainer
#93 lore raw

PATCH 93/338 drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 725a521a18734f65de05b8d353b5bd0d3ca4c37a ]

As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL.

If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak.

Fixes d8ade3526b2a ("drm/radeon: handle non-VGA class pci devices with ATRM")
Fixes c61e2775873f ("drm/radeon: split ATRM support out from the ATPX handler (v3)")
---
 drivers/gpu/drm/radeon/radeon_bios.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/radeon/radeon_bios.c +1 -0
index 80562aeb8149..92f50b26e4c9 100644
@@ -215,6 +215,7 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev)
 
 	if (!found)
 		return false;
+	pci_dev_put(pdev);
 
 	rdev->bios = kmalloc(size, GFP_KERNEL);
 	if (!rdev->bios) {
Signature · 1 line
2.35.1
author maintainer
#94 lore raw

PATCH 94/338 drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit ca54639c7752edf1304d92ff4d0c049d4efc9ba0 ]

As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL.

If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak.

Fixes d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c +1 -0
index 057e1ecd83ce..b90b39a841e9 100644
@@ -307,6 +307,7 @@ static bool amdgpu_atrm_get_bios(struct amdgpu_device *adev)
 
 	if (!found)
 		return false;
+	pci_dev_put(pdev);
 
 	adev->bios = kmalloc(size, GFP_KERNEL);
 	if (!adev->bios) {
Signature · 1 line
2.35.1
author maintainer
#95 lore raw

PATCH 95/338 ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe

In reply to Greg Kroah-Hartman

From: Zhang Qilong <[email protected]>

[ Upstream commit 97b801be6f8e53676b9f2b105f54e35c745c1b22 ]

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. We fix it by going to err_pm instead of err_clk.

Fixes f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
---
 sound/soc/codecs/pcm512x.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
sound/soc/codecs/pcm512x.c +4 -4
index 940bdc30753d..166ac1f5f2c1 100644
@@ -1472,7 +1472,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap)
 			if (val > 6) {
 				dev_err(dev, "Invalid pll-in\n");
 				ret = -EINVAL;
-				goto err_clk;
+				goto err_pm;
 			}
 			pcm512x->pll_in = val;
 		}
@@ -1481,7 +1481,7 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap)
 			if (val > 6) {
 				dev_err(dev, "Invalid pll-out\n");
 				ret = -EINVAL;
-				goto err_clk;
+				goto err_pm;
 			}
 			pcm512x->pll_out = val;
 		}
@@ -1490,12 +1490,12 @@ int pcm512x_probe(struct device *dev, struct regmap *regmap)
 			dev_err(dev,
 				"Error: both pll-in and pll-out, or none\n");
 			ret = -EINVAL;
-			goto err_clk;
+			goto err_pm;
 		}
 		if (pcm512x->pll_in && pcm512x->pll_in == pcm512x->pll_out) {
 			dev_err(dev, "Error: pll-in == pll-out\n");
 			ret = -EINVAL;
-			goto err_clk;
+			goto err_pm;
 		}
 	}
 #endif
Signature · 1 line
2.35.1
author maintainer
#96 lore raw

PATCH 96/338 bonding: uninitialized variable in bond_miimon_inspect()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e5214f363dabca240446272dac54d404501ad5e5 ]

The "ignore_updelay" variable needs to be initialized to false.

Fixes f8a65ab2f3ff ("bonding: fix link recovery in mode 2 when updelay is nonzero")
---
 drivers/net/bonding/bond_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +1 -1
index 98e64f63d9ba..0ffca2890e9a 100644
@@ -2076,10 +2076,10 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
 /* called with rcu_read_lock() */
 static int bond_miimon_inspect(struct bonding *bond)
 {
+	bool ignore_updelay = false;
 	int link_state, commit = 0;
 	struct list_head *iter;
 	struct slave *slave;
-	bool ignore_updelay;
 
 	ignore_updelay = !rcu_dereference(bond->curr_active_slave);
 
Signature · 1 line
2.35.1
author maintainer
#97 lore raw

PATCH 97/338 wifi: mac80211: fix memory leak in ieee80211_if_add()

In reply to Greg Kroah-Hartman

From: Zhengchao Shao <[email protected]>

[ Upstream commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293 ]

When register_netdevice() failed in ieee80211_if_add(), ndev->tstats isn't released. Fix it.

Fixes 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics")
---
 net/mac80211/iface.c | 1 +
 1 file changed, 1 insertion(+)
net/mac80211/iface.c +1 -0
index adafa29d3021..69af1d1ae33c 100644
@@ -1902,6 +1902,7 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 
 		ret = register_netdevice(ndev);
 		if (ret) {
+			ieee80211_if_free(ndev);
 			free_netdev(ndev);
 			return ret;
 		}
Signature · 1 line
2.35.1
#98 lore raw

Re: [PATCH 4.14 097/338] wifi: mac80211: fix memory leak in ieee80211_if_add()

Quoted 7 lines · Greg Kroah-Hartman

From: Zhengchao Shao <[email protected]>

[ Upstream commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293 ]

When register_netdevice() failed in ieee80211_if_add(), ndev->tstats isn't released. Fix it.

Please drop this wherever you still can - we just reverted it because it was actually based on broken analysis.

johannes

author maintainer
#99 lore raw

Re: [PATCH 4.14 097/338] wifi: mac80211: fix memory leak in ieee80211_if_add()

Quoted 11 lines · Johannes Berg
Quoted 7 lines · Greg Kroah-Hartman

From: Zhengchao Shao <[email protected]>

[ Upstream commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293 ]

When register_netdevice() failed in ieee80211_if_add(), ndev->tstats isn't released. Fix it.

Please drop this wherever you still can - we just reverted it because it was actually based on broken analysis.

Thanks, will drop it from 5.4 and older queues.

greg k-h

author maintainer
#100 lore raw

PATCH 98/338 regulator: core: fix module refcount leak in set_supply()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit da46ee19cbd8344d6860816b4827a7ce95764867 ]

If create_regulator() fails in set_supply(), the module refcount needs be put to keep refcount balanced.

Fixes e2c09ae7a74d ("regulator: core: Increase refcount for regulator supply's module")
---
 drivers/regulator/core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/regulator/core.c +1 -0
index d6cd8e6e69cf..871d657a161f 100644
@@ -1164,6 +1164,7 @@ static int set_supply(struct regulator_dev *rdev,
 
 	rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
 	if (rdev->supply == NULL) {
+		module_put(supply_rdev->owner);
 		err = -ENOMEM;
 		return err;
 	}
Signature · 1 line
2.35.1
author maintainer
#101 lore raw

PATCH 99/338 media: saa7164: fix missing pci_disable_device()

In reply to Greg Kroah-Hartman

From: Liu Shixin <[email protected]>

[ Upstream commit 57fb35d7542384cac8f198cd1c927540ad38b61a ]

Add missing pci_disable_device() in the error path in saa7164_initdev().

Fixes 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
---
 drivers/media/pci/saa7164/saa7164-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/pci/saa7164/saa7164-core.c +3 -1
index fca36a4910c2..f922c8b3cf99 100644
@@ -1240,7 +1240,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
 
 	if (saa7164_dev_setup(dev) < 0) {
 		err = -EINVAL;
-		goto fail_free;
+		goto fail_dev;
 	}
 
 	/* print pci info */
@@ -1408,6 +1408,8 @@ static int saa7164_initdev(struct pci_dev *pci_dev,
 
 fail_irq:
 	saa7164_dev_unregister(dev);
+fail_dev:
+	pci_disable_device(pci_dev);
 fail_free:
 	v4l2_device_unregister(&dev->v4l2_dev);
 	kfree(dev);
Signature · 1 line
2.35.1
author maintainer
#102 lore raw

PATCH 100/338 ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt

In reply to Greg Kroah-Hartman

From: Gaosheng Cui <[email protected]>

[ Upstream commit cf2ea3c86ad90d63d1c572b43e1ca9276b0357ad ]

I got a null-ptr-defer error report when I do the following tests on the qemu platform:

make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m, CONFIG_SND_MTS64=m

Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF

Executing the script, perhaps several times, we will get a null-ptr-defer report, as follow:

syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 0 P4D 0
 Oops: 0002 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
 Call Trace:
  <IRQ>
  snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
  parport_irq_handler+0x37/0x50 [parport]
  __handle_irq_event_percpu+0x39/0x190
  handle_irq_event_percpu+0xa/0x30
  handle_irq_event+0x2f/0x50
  handle_edge_irq+0x99/0x1b0
  __common_interrupt+0x5d/0x100
  common_interrupt+0xa0/0xc0
  </IRQ>
  <TASK>
  asm_common_interrupt+0x22/0x40
 RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
  parport_claim+0xbd/0x230 [parport]
  snd_mts64_probe+0x14a/0x465 [snd_mts64]
  platform_probe+0x3f/0xa0
  really_probe+0x129/0x2c0
  __driver_probe_device+0x6d/0xc0
  driver_probe_device+0x1a/0xa0
  __device_attach_driver+0x7a/0xb0
  bus_for_each_drv+0x62/0xb0
  __device_attach+0xe4/0x180
  bus_probe_device+0x82/0xa0
  device_add+0x550/0x920
  platform_device_add+0x106/0x220
  snd_mts64_attach+0x2e/0x80 [snd_mts64]
  port_check+0x14/0x20 [parport]
  bus_for_each_dev+0x6e/0xc0
  __parport_register_driver+0x7c/0xb0 [parport]
  snd_mts64_module_init+0x31/0x1000 [snd_mts64]
  do_one_initcall+0x3c/0x1f0
  do_init_module+0x46/0x1c6
  load_module+0x1d8d/0x1e10
  __do_sys_finit_module+0xa2/0xf0
  do_syscall_64+0x37/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
 Kernel panic - not syncing: Fatal exception in interrupt
 Rebooting in 1 seconds..

The mts wa not initialized during interrupt, we add check for mts to fix this bug.

Fixes 68ab801e32bb ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140")
---
 sound/drivers/mts64.c | 3 +++
 1 file changed, 3 insertions(+)
sound/drivers/mts64.c +3 -0
index f32e81342247..ca56cfcc383a 100644
@@ -830,6 +830,9 @@ static void snd_mts64_interrupt(void *private)
 	u8 status, data;
 	struct snd_rawmidi_substream *substream;
 
+	if (!mts)
+		return;
+
 	spin_lock(&mts->lock);
 	ret = mts64_read(mts->pardev->port);
 	data = ret & 0x00ff;
Signature · 1 line
2.35.1
author maintainer
#103 lore raw

PATCH 101/338 SUNRPC: Fix missing release socket in rpc_sockname()

In reply to Greg Kroah-Hartman

From: Wang ShaoBo <[email protected]>

[ Upstream commit 50fa355bc0d75911fe9d5072a5ba52cdb803aff7 ]

socket dynamically created is not released when getting an unintended address family type in rpc_sockname(), direct to out_release for calling sock_release().

Fixes 2e738fdce22f ("SUNRPC: Add API to acquire source address")
---
 net/sunrpc/clnt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sunrpc/clnt.c +1 -1
index 9259529e0412..411925b043cc 100644
@@ -1267,7 +1267,7 @@ static int rpc_sockname(struct net *net, struct sockaddr *sap, size_t salen,
 		break;
 	default:
 		err = -EAFNOSUPPORT;
-		goto out;
+		goto out_release;
 	}
 	if (err < 0) {
 		dprintk("RPC:       can't bind UDP socket (%d)\n", err);
Signature · 1 line
2.35.1
author maintainer
#104 lore raw

PATCH 102/338 NFSv4.x: Fail client initialisation if state manager thread cant run

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit b4e4f66901658fae0614dea5bf91062a5387eda7 ]

If the state manager thread fails to start, then we should just mark the client initialisation as failed so that other processes or threads don't get stuck in nfs_wait_client_init_complete().

Fixes 4697bd5e9419 ("NFSv4: Fix a race in the net namespace mount notification")
---
 fs/nfs/nfs4state.c | 2 ++
 1 file changed, 2 insertions(+)
fs/nfs/nfs4state.c +2 -0
index 0c124465d4e5..9616f7eacd4c 100644
@@ -1209,6 +1209,8 @@ void nfs4_schedule_state_manager(struct nfs_client *clp)
 	if (IS_ERR(task)) {
 		printk(KERN_ERR "%s: kthread_run: %ld\n",
 			__func__, PTR_ERR(task));
+		if (!nfs_client_init_is_complete(clp))
+			nfs_mark_client_ready(clp, PTR_ERR(task));
 		nfs4_clear_state_manager_bit(clp);
 		nfs_put_client(clp);
 		module_put(THIS_MODULE);
Signature · 1 line
2.35.1
author maintainer
#105 lore raw

PATCH 103/338 mmc: moxart: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 0ca18d09c744fb030ae9bc5836c3e357e0237dea ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host().

Fixes 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
---
 drivers/mmc/host/moxart-mmc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/moxart-mmc.c +3 -1
index 1552d1f09c5c..52307dce08ba 100644
@@ -660,7 +660,9 @@ static int moxart_probe(struct platform_device *pdev)
 		goto out;
 
 	dev_set_drvdata(dev, mmc);
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto out;
 
 	dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width);
 
Signature · 1 line
2.35.1
author maintainer
#106 lore raw

PATCH 104/338 mmc: mxcmmc: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit cde600af7b413c9fe03e85c58c4279df90e91d13 ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host().

Fixes d96be879ff46 ("mmc: Add a MX2/MX3 specific SDHC driver")
---
 drivers/mmc/host/mxcmmc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/mxcmmc.c +3 -1
index 1d5418e4efae..05aca0372ab2 100644
@@ -1169,7 +1169,9 @@ static int mxcmci_probe(struct platform_device *pdev)
 	host->watchdog.function = &mxcmci_watchdog;
 	host->watchdog.data = (unsigned long)mmc;
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto out_free_dma;
 
 	return 0;
 
Signature · 1 line
2.35.1
author maintainer
#107 lore raw

PATCH 105/338 mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit fc38a5a10e9e5a75eb9189854abeb8405b214cc9 ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the error path, besides, led_classdev_unregister() and pm_runtime_disable() also need be called.

Fixes c7f6558d84af ("mmc: Add realtek USB sdmmc host driver")
---
 drivers/mmc/host/rtsx_usb_sdmmc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/mmc/host/rtsx_usb_sdmmc.c +10 -1
index 76da1687ab37..38fb61313bec 100644
@@ -1355,6 +1355,7 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
 #ifdef RTSX_USB_USE_LEDS_CLASS
 	int err;
 #endif
+	int ret;
 
 	ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent));
 	if (!ucr)
@@ -1393,7 +1394,15 @@ static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
 	INIT_WORK(&host->led_work, rtsx_usb_update_led);
 
 #endif
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret) {
+#ifdef RTSX_USB_USE_LEDS_CLASS
+		led_classdev_unregister(&host->led);
+#endif
+		mmc_free_host(mmc);
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
 
 	return 0;
 }
Signature · 1 line
2.35.1
author maintainer
#108 lore raw

PATCH 106/338 mmc: toshsd: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit f670744a316ea983113a65313dcd387b5a992444 ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, free_irq() also needs be called.

Fixes a5eb8bbd66cc ("mmc: add Toshiba PCI SD controller driver")
---
 drivers/mmc/host/toshsd.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/mmc/host/toshsd.c +5 -1
index dd961c54a6a9..9236965b00fd 100644
@@ -655,7 +655,9 @@ static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		goto unmap;
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto free_irq;
 
 	base = pci_resource_start(pdev, 0);
 	dev_dbg(&pdev->dev, "MMIO %pa, IRQ %d\n", &base, pdev->irq);
@@ -664,6 +666,8 @@ static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	return 0;
 
+free_irq:
+	free_irq(pdev->irq, host);
 unmap:
 	pci_iounmap(pdev, host->ioaddr);
 release:
Signature · 1 line
2.35.1
author maintainer
#109 lore raw

PATCH 107/338 mmc: vub300: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 0613ad2401f88bdeae5594c30afe318e93b14676 ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, the timer added before mmc_add_host() needs be del.

And this patch fixes another missing call mmc_free_host() if usb_control_msg() fails.

Fixes 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
---
 drivers/mmc/host/vub300.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/mmc/host/vub300.c +8 -3
index 71e4392de25a..0d2d748d0b58 100644
@@ -2309,14 +2309,14 @@ static int vub300_probe(struct usb_interface *interface,
 				0x0000, 0x0000, &vub300->system_port_status,
 				sizeof(vub300->system_port_status), 1000);
 	if (retval < 0) {
-		goto error4;
+		goto error5;
 	} else if (sizeof(vub300->system_port_status) == retval) {
 		vub300->card_present =
 			(0x0001 & vub300->system_port_status.port_flags) ? 1 : 0;
 		vub300->read_only =
 			(0x0010 & vub300->system_port_status.port_flags) ? 1 : 0;
 	} else {
-		goto error4;
+		goto error5;
 	}
 	usb_set_intfdata(interface, vub300);
 	INIT_DELAYED_WORK(&vub300->pollwork, vub300_pollwork_thread);
@@ -2342,8 +2342,13 @@ static int vub300_probe(struct usb_interface *interface,
 			 "USB vub300 remote SDIO host controller[%d]"
 			 "connected with no SD/SDIO card inserted\n",
 			 interface_to_InterfaceNumber(interface));
-	mmc_add_host(mmc);
+	retval = mmc_add_host(mmc);
+	if (retval)
+		goto error6;
+
 	return 0;
+error6:
+	del_timer_sync(&vub300->inactivity_timer);
 error5:
 	mmc_free_host(mmc);
 	/*
Signature · 1 line
2.35.1
author maintainer
#110 lore raw

PATCH 108/338 mmc: wmt-sdmmc: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 29276d56f6ed138db0f38cd31aedc0b725c8c76c ]

mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, clk_disable_unprepare() also needs be called.

Fixes 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
---
 drivers/mmc/host/wmt-sdmmc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/mmc/host/wmt-sdmmc.c +5 -1
index 85cad20b2ae8..627b7d487461 100644
@@ -863,11 +863,15 @@ static int wmt_mci_probe(struct platform_device *pdev)
 	/* configure the controller to a known 'ready' state */
 	wmt_reset_hardware(mmc);
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto fail7;
 
 	dev_info(&pdev->dev, "WMT SDHC Controller initialized\n");
 
 	return 0;
+fail7:
+	clk_disable_unprepare(priv->clk_sdmmc);
 fail6:
 	clk_put(priv->clk_sdmmc);
 fail5_and_a_half:
Signature · 1 line
2.35.1
author maintainer
#111 lore raw

PATCH 109/338 mmc: via-sdmmc: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit e4e46fb61e3bb4628170810d3f2b996b709b90d9 ]

mmc_add_host() may return error, if we ignore its return value, it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path which will call mmc_free_host().

Fixes f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver")
---
 drivers/mmc/host/via-sdmmc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/via-sdmmc.c +3 -1
index 4e5043657ee2..70905d9beb38 100644
@@ -1168,7 +1168,9 @@ static int via_sd_probe(struct pci_dev *pcidev,
 	    pcidev->subsystem_device == 0x3891)
 		sdhost->quirks = VIA_CRDR_QUIRK_300MS_PWRDELAY;
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto unmap;
 
 	return 0;
 
Signature · 1 line
2.35.1
author maintainer
#112 lore raw

PATCH 110/338 mmc: wbsd: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit dc5b9b50fc9d1334407e316e6e29a5097ef833bd ]

mmc_add_host() may return error, if we ignore its return value, it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, other resources also need be released.

---
 drivers/mmc/host/wbsd.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/mmc/host/wbsd.c +11 -1
index 546aaf8d1507..6e0f37f373e0 100644
@@ -1716,7 +1716,17 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma,
 	 */
 	wbsd_init_device(host);
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret) {
+		if (!pnp)
+			wbsd_chip_poweroff(host);
+
+		wbsd_release_resources(host);
+		wbsd_free_mmc(dev);
+
+		mmc_free_host(mmc);
+		return ret;
+	}
 
 	pr_info("%s: W83L51xD", mmc_hostname(mmc));
 	if (host->chip_id != 0)
Signature · 1 line
2.35.1
author maintainer
#113 lore raw

PATCH 111/338 mmc: mmci: fix return value check of mmc_add_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit b38a20f29a49ae04d23750d104b25400b792b98c ]

mmc_add_host() may return error, if we ignore its return value, it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which will call mmc_free_host().

---
 drivers/mmc/host/mmci.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mmc/host/mmci.c +3 -1
index 77f18729ee96..0a9ba34c5603 100644
@@ -1792,7 +1792,9 @@ static int mmci_probe(struct amba_device *dev,
 	pm_runtime_set_autosuspend_delay(&dev->dev, 50);
 	pm_runtime_use_autosuspend(&dev->dev);
 
-	mmc_add_host(mmc);
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto clk_disable;
 
 	pm_runtime_put(&dev->dev);
 	return 0;
Signature · 1 line
2.35.1
author maintainer
#114 lore raw

PATCH 112/338 media: c8sectpfe: Add of_node_put() when breaking out of loop

In reply to Greg Kroah-Hartman

From: Liang He <[email protected]>

[ Upstream commit 63ff05a1ad242a5a0f897921c87b70d601bda59c ]

In configure_channels(), we should call of_node_put() when breaking out of for_each_child_of_node() which will automatically increase and decrease the refcount.

Fixes c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
---
 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c +1 -0
index 23d0cedf4d9d..f42289f9e8c5 100644
@@ -947,6 +947,7 @@ static int configure_channels(struct c8sectpfei *fei)
 		if (ret) {
 			dev_err(fei->dev,
 				"configure_memdma_and_inputblock failed\n");
+			of_node_put(child);
 			goto err_unmap;
 		}
 		index++;
Signature · 1 line
2.35.1
author maintainer
#115 lore raw

PATCH 113/338 media: coda: Add check for dcoda_iram_alloc

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 6b8082238fb8bb20f67e46388123e67a5bbc558d ]

As the coda_iram_alloc may return NULL pointer, it should be better to check the return value
in order to avoid NULL poineter dereference, same as the others.

Fixes b313bcc9a467 ("[media] coda: simplify IRAM setup")
---
 drivers/media/platform/coda/coda-bit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/platform/coda/coda-bit.c +2 -2
index d538cd49a3ba..7a96b53bcf6b 100644
@@ -637,7 +637,7 @@ static void coda_setup_iram(struct coda_ctx *ctx)
 		/* Only H.264BP and H.263P3 are considered */
 		iram_info->buf_dbk_y_use = coda_iram_alloc(iram_info, w64);
 		iram_info->buf_dbk_c_use = coda_iram_alloc(iram_info, w64);
-		if (!iram_info->buf_dbk_c_use)
+		if (!iram_info->buf_dbk_y_use || !iram_info->buf_dbk_c_use)
 			goto out;
 		iram_info->axi_sram_use |= dbk_bits;
 
@@ -661,7 +661,7 @@ static void coda_setup_iram(struct coda_ctx *ctx)
 
 		iram_info->buf_dbk_y_use = coda_iram_alloc(iram_info, w128);
 		iram_info->buf_dbk_c_use = coda_iram_alloc(iram_info, w128);
-		if (!iram_info->buf_dbk_c_use)
+		if (!iram_info->buf_dbk_y_use || !iram_info->buf_dbk_c_use)
 			goto out;
 		iram_info->axi_sram_use |= dbk_bits;
 
Signature · 1 line
2.35.1
author maintainer
#116 lore raw

PATCH 114/338 media: coda: Add check for kmalloc

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 6e5e5defdb8b0186312c2f855ace175aee6daf9b ]

As the kmalloc may return NULL pointer,
it should be better to check the return value
in order to avoid NULL poineter dereference,
same as the others.

Fixes cb1d3a336371 ("[media] coda: add CODA7541 JPEG support")
---
 drivers/media/platform/coda/coda-bit.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/media/platform/coda/coda-bit.c +8 -2
index 7a96b53bcf6b..e21cf732a86e 100644
@@ -865,10 +865,16 @@ static int coda_start_encoding(struct coda_ctx *ctx)
 	}
 
 	if (dst_fourcc == V4L2_PIX_FMT_JPEG) {
-		if (!ctx->params.jpeg_qmat_tab[0])
+		if (!ctx->params.jpeg_qmat_tab[0]) {
 			ctx->params.jpeg_qmat_tab[0] = kmalloc(64, GFP_KERNEL);
-		if (!ctx->params.jpeg_qmat_tab[1])
+			if (!ctx->params.jpeg_qmat_tab[0])
+				return -ENOMEM;
+		}
+		if (!ctx->params.jpeg_qmat_tab[1]) {
 			ctx->params.jpeg_qmat_tab[1] = kmalloc(64, GFP_KERNEL);
+			if (!ctx->params.jpeg_qmat_tab[1])
+				return -ENOMEM;
+		}
 		coda_set_jpeg_compression_quality(ctx, ctx->params.jpeg_quality);
 	}
 
Signature · 1 line
2.35.1
author maintainer
#117 lore raw

PATCH 115/338 clk: samsung: Fix memory leak in _samsung_clk_register_pll()

In reply to Greg Kroah-Hartman

From: Xiu Jianfeng <[email protected]>

[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]

If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

Fixes 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
---
 drivers/clk/samsung/clk-pll.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/samsung/clk-pll.c +1 -0
index 037c61484098..8778425e2e87 100644
@@ -1392,6 +1392,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	if (ret) {
 		pr_err("%s: failed to register pll clock %s : %d\n",
 			__func__, pll_clk->name, ret);
+		kfree(pll->rate_table);
 		kfree(pll);
 		return;
 	}
Signature · 1 line
2.35.1
author maintainer
#118 lore raw

PATCH 116/338 wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h

In reply to Greg Kroah-Hartman

From: Bitterblue Smith <[email protected]>

[ Upstream commit dd469a754afdb782ba3033cee102147493dc39f4 ]

This struct is used to access a sequence of bytes received from the wifi chip. It must not have any padding bytes between the members.

This doesn't change anything on my system, possibly because currently none of the members need more than byte alignment.

Fixes b2b43b7837ba ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu")
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +1 -1
index a895b6fd6f85..c1163f2a0925 100644
@@ -1191,7 +1191,7 @@ struct rtl8723bu_c2h {
 			u8 dummy3_0;
 		} __packed ra_report;
 	};
-};
+} __packed;
 
 struct rtl8xxxu_fileops;
 
Signature · 1 line
2.35.1
author maintainer
#119 lore raw

PATCH 117/338 wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit c2f2924bc7f9ea75ef8d95863e710168f8196256 ]

Fix to return a negative error code instead of 0 when brcmf_chip_set_active() fails. In addition, change the return value for brcmf_pcie_exit_download_state() to keep consistent.

Fixes d380ebc9b6fb ("brcmfmac: rename chip download functions")
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +1 -1
index fbaec4ea5988..4aa199be0df3 100644
@@ -599,7 +599,7 @@ static int brcmf_pcie_exit_download_state(struct brcmf_pciedev_info *devinfo,
 	}
 
 	if (!brcmf_chip_set_active(devinfo->ci, resetintr))
-		return -EINVAL;
+		return -EIO;
 	return 0;
 }
 
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +1 -0
index 8fa4ffff7c32..aa21bdb3f371 100644
@@ -3326,6 +3326,7 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 	/* Take arm out of reset */
 	if (!brcmf_chip_set_active(bus->ci, rstvec)) {
 		brcmf_err("error getting out of ARM core reset\n");
+		bcmerror = -EIO;
 		goto err;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#120 lore raw

PATCH 118/338 blktrace: Fix output non-blktrace event when blk_classic option enabled

In reply to Greg Kroah-Hartman

From: Yang Jihong <[email protected]>

[ Upstream commit f596da3efaf4130ff61cd029558845808df9bf99 ]

When the blk_classic option is enabled, non-blktrace events must be filtered out. Otherwise, events of other types are output in the blktrace classic format, which is unexpected.

The problem can be triggered in the following ways:

  # echo 1 > /sys/kernel/debug/tracing/options/blk_classic
  # echo 1 > /sys/kernel/debug/tracing/events/enable
  # echo blk > /sys/kernel/debug/tracing/current_tracer
  # cat /sys/kernel/debug/tracing/trace_pipe
---
 kernel/trace/blktrace.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/trace/blktrace.c +2 -1
index 0b22bf622397..30e3af538039 100644
@@ -1612,7 +1612,8 @@ blk_trace_event_print_binary(struct trace_iterator *iter, int flags,
 
 static enum print_line_t blk_tracer_print_line(struct trace_iterator *iter)
 {
-	if (!(blk_tracer_flags.val & TRACE_BLK_OPT_CLASSIC))
+	if ((iter->ent->type != TRACE_BLK) ||
+	    !(blk_tracer_flags.val & TRACE_BLK_OPT_CLASSIC))
 		return TRACE_TYPE_UNHANDLED;
 
 	return print_one_line(iter, true);
Signature · 1 line
2.35.1
author maintainer
#121 lore raw

PATCH 119/338 net: vmw_vsock: vmci: Check memcpy_from_msg()

In reply to Greg Kroah-Hartman

From: Artem Chernyshev <[email protected]>

[ Upstream commit 44aa5a6dba8283bfda28b1517af4de711c5652a4 ]

vmci_transport_dgram_enqueue() does not check the return value of memcpy_from_msg(). If memcpy_from_msg() fails, it is possible that uninitialized memory contents are sent unintentionally instead of user's message in the datagram to the destination. Return with an error if memcpy_from_msg() fails.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes 0f7db23a07af ("vmci_transport: switch ->enqeue_dgram, ->enqueue_stream and ->dequeue_stream to msghdr")
---
 net/vmw_vsock/vmci_transport.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/vmw_vsock/vmci_transport.c +5 -1
index c1da1ce3d36e..da17b4c153b1 100644
@@ -1730,7 +1730,11 @@ static int vmci_transport_dgram_enqueue(
 	if (!dg)
 		return -ENOMEM;
 
-	memcpy_from_msg(VMCI_DG_PAYLOAD(dg), msg, len);
+	err = memcpy_from_msg(VMCI_DG_PAYLOAD(dg), msg, len);
+	if (err) {
+		kfree(dg);
+		return err;
+	}
 
 	dg->dst = vmci_make_handle(remote_addr->svm_cid,
 				   remote_addr->svm_port);
Signature · 1 line
2.35.1
author maintainer
#122 lore raw

PATCH 120/338 net: defxx: Fix missing err handling in dfx_init()

In reply to Greg Kroah-Hartman

From: Yongqiang Liu <[email protected]>

[ Upstream commit ae18dcdff0f8d7e84cd3fd9f496518b5e72d185d ]

When eisa_driver_register() or tc_register_driver() failed, the modprobe defxx would fail with some err log as follows:

Error: Driver 'defxx' is already registered, aborting...

Fix this issue by adding err hanling in dfx_init().

Fixes e89a2cfb7d7b5 ("[TC] defxx: TURBOchannel support")
---
 drivers/net/fddi/defxx.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)
drivers/net/fddi/defxx.c +18 -4
index 3b48c890540a..7f14aad1c240 100644
@@ -3844,10 +3844,24 @@ static int dfx_init(void)
 	int status;
 
 	status = pci_register_driver(&dfx_pci_driver);
-	if (!status)
-		status = eisa_driver_register(&dfx_eisa_driver);
-	if (!status)
-		status = tc_register_driver(&dfx_tc_driver);
+	if (status)
+		goto err_pci_register;
+
+	status = eisa_driver_register(&dfx_eisa_driver);
+	if (status)
+		goto err_eisa_register;
+
+	status = tc_register_driver(&dfx_tc_driver);
+	if (status)
+		goto err_tc_register;
+
+	return 0;
+
+err_tc_register:
+	eisa_driver_unregister(&dfx_eisa_driver);
+err_eisa_register:
+	pci_unregister_driver(&dfx_pci_driver);
+err_pci_register:
 	return status;
 }
 
Signature · 1 line
2.35.1
author maintainer
#123 lore raw

PATCH 121/338 drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()

In reply to Greg Kroah-Hartman

From: Yuan Can <[email protected]>

[ Upstream commit 01de1123322e4fe1bbd0fcdf0982511b55519c03 ]

If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp needs to be freed.

Fixes f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +2 -0
index 44caa7c2077e..d89d9247b7b9 100644
@@ -222,6 +222,8 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs)
 	return 0;
 
 qlcnic_destroy_async_wq:
+	while (i--)
+		kfree(sriov->vf_info[i].vp);
 	destroy_workqueue(bc->bc_async_wq);
 
 qlcnic_destroy_trans_wq:
Signature · 1 line
2.35.1
author maintainer
#124 lore raw

PATCH 122/338 ethernet: s2io: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 6cee96e09df54ae17784c0f38a49e0ed8229b825 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal.

In this case, dev_kfree_skb() is called in free_tx_buffers() to drop the SKBs in tx buffers, when the card is down, so replace it with dev_kfree_skb_irq() here.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/net/ethernet/neterion/s2io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/neterion/s2io.c +1 -1
index 94aabf280768..cb8094de89d1 100644
@@ -2381,7 +2381,7 @@ static void free_tx_buffers(struct s2io_nic *nic)
 			skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
 			if (skb) {
 				swstats->mem_freed += skb->truesize;
-				dev_kfree_skb(skb);
+				dev_kfree_skb_irq(skb);
 				cnt++;
 			}
 		}
Signature · 1 line
2.35.1
author maintainer
#125 lore raw

PATCH 123/338 net: farsync: Fix kmemleak when rmmods farsync

In reply to Greg Kroah-Hartman

From: Li Zetao <[email protected]>

[ Upstream commit 2f623aaf9f31de968dea6169849706a2f9be444c ]

There are two memory leaks reported by kmemleak:

unreferenced object 0xffff888114b20200 (size 128):

    comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s)
    hex dump (first 32 bytes):
      e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff  .bW......bW.....
      01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
      [<ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0
      [<ffffffff83d3989d>] dev_addr_init+0x13d/0x230
      [<ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50
      [<ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80
      [<ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync]
      ...

unreferenced object 0xffff88810b85b000 (size 1024):

    comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s)
    hex dump (first 32 bytes):
      00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff  .........p......
      00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00  ................
    backtrace:
      [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
      [<ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync]
      [<ffffffff82060e83>] local_pci_probe+0xd3/0x170
      ...

The root cause is traced to the netdev and fst_card_info are not freed when removes one fst in fst_remove_one(), which may trigger oom if repeated insmod and rmmod module.

Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as the operations on the error handling path in fst_add_one().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/net/wan/farsync.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wan/farsync.c +2 -0
index bd46b2552980..6284e8906e36 100644
@@ -2619,6 +2619,7 @@ fst_remove_one(struct pci_dev *pdev)
 	for (i = 0; i < card->nports; i++) {
 		struct net_device *dev = port_to_dev(&card->ports[i]);
 		unregister_hdlc_device(dev);
+		free_netdev(dev);
 	}
 
 	fst_disable_intr(card);
@@ -2639,6 +2640,7 @@ fst_remove_one(struct pci_dev *pdev)
 				    card->tx_dma_handle_card);
 	}
 	fst_card_array[card->card_no] = NULL;
+	kfree(card);
 }
 
 static struct pci_driver fst_driver = {
Signature · 1 line
2.35.1
author maintainer
#126 lore raw

PATCH 124/338 net/tunnel: wait until all sk_user_data reader finish before releasing the sock

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit 3cf7203ca620682165706f70a1b12b5194607dce ]

There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g.

#0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62

      [exception RIP: vxlan_ecn_decapsulate+0x3b]
      RIP: ffffffffc1014e7b  RSP: ffffa25ec6978cb0  RFLAGS: 00010246
      RAX: 0000000000000008  RBX: ffff8aa000888000  RCX: 0000000000000000
      RDX: 000000000000000e  RSI: ffff8a9fc7ab803e  RDI: ffff8a9fd1168700
      RBP: ffff8a9fc7ab803e   R8: 0000000000700000   R9: 00000000000010ae
      R10: ffff8a9fcb748980  R11: 0000000000000000  R12: ffff8a9fd1168700
      R13: ffff8aa000888000  R14: 00000000002a0000  R15: 00000000000010ae
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45
#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a
#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3

Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh

Fix this by waiting for all sk_user_data reader to finish before releasing the sock.

Fixes 6a93cc905274 ("udp-tunnel: Add a few more UDP tunnel APIs")
---
 net/ipv4/udp_tunnel.c | 1 +
 1 file changed, 1 insertion(+)
net/ipv4/udp_tunnel.c +1 -0
index 6539ff15e9a3..d03d74388870 100644
@@ -186,6 +186,7 @@ EXPORT_SYMBOL_GPL(udp_tunnel_xmit_skb);
 void udp_tunnel_sock_release(struct socket *sock)
 {
 	rcu_assign_sk_user_data(sock->sk, NULL);
+	synchronize_rcu();
 	kernel_sock_shutdown(sock, SHUT_RDWR);
 	sock_release(sock);
 }
Signature · 1 line
2.35.1
author maintainer
#127 lore raw

PATCH 125/338 net: apple: mace: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 3dfe3486c1cd4f82b466b7d307f23777137b8acc ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal.

In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/net/ethernet/apple/mace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/apple/mace.c +1 -1
index e58b157b7d7c..11e6285b0c8e 100644
@@ -842,7 +842,7 @@ static void mace_tx_timeout(unsigned long data)
     if (mp->tx_bad_runt) {
 	mp->tx_bad_runt = 0;
     } else if (i != mp->tx_fill) {
-	dev_kfree_skb(mp->tx_bufs[i]);
+	dev_kfree_skb_irq(mp->tx_bufs[i]);
 	if (++i >= N_TX_RING)
 	    i = 0;
 	mp->tx_empty = i;
Signature · 1 line
2.35.1
author maintainer
#128 lore raw

PATCH 126/338 net: apple: bmac: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 5fe02e046e6422c4adfdbc50206ec7186077da24 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal.

In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/net/ethernet/apple/bmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/apple/bmac.c +1 -1
index a8b462e1beba..7e4567c7bcae 100644
@@ -1516,7 +1516,7 @@ static void bmac_tx_timeout(unsigned long data)
 	i = bp->tx_empty;
 	++dev->stats.tx_errors;
 	if (i != bp->tx_fill) {
-		dev_kfree_skb(bp->tx_bufs[i]);
+		dev_kfree_skb_irq(bp->tx_bufs[i]);
 		bp->tx_bufs[i] = NULL;
 		if (++i >= N_TX_RING) i = 0;
 		bp->tx_empty = i;
Signature · 1 line
2.35.1
author maintainer
#129 lore raw

PATCH 127/338 net: emaclite: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit d1678bf45f21fa5ae4a456f821858679556ea5f8 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal.

In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().

Fixes bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/xilinx/xilinx_emaclite.c +1 -1
index 9359ca9f3aef..9a78e98a7c66 100644
@@ -537,7 +537,7 @@ static void xemaclite_tx_timeout(struct net_device *dev)
 	xemaclite_enable_interrupts(lp);
 
 	if (lp->deferred_skb) {
-		dev_kfree_skb(lp->deferred_skb);
+		dev_kfree_skb_irq(lp->deferred_skb);
 		lp->deferred_skb = NULL;
 		dev->stats.tx_errors++;
 	}
Signature · 1 line
2.35.1
author maintainer
#130 lore raw

PATCH 128/338 net: ethernet: dnet: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit f07fadcbee2a5e84caa67c7c445424200bffb60b ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

In this case, the lock is used to protected 'bp', so we can move dev_kfree_skb() after the spin_unlock_irqrestore().

Fixes 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)")
---
 drivers/net/ethernet/dnet.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/dnet.c +2 -2
index 5a847941c46b..f7d126a2617e 100644
@@ -558,11 +558,11 @@ static netdev_tx_t dnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	skb_tx_timestamp(skb);
 
+	spin_unlock_irqrestore(&bp->lock, flags);
+
 	/* free the buffer */
 	dev_kfree_skb(skb);
 
-	spin_unlock_irqrestore(&bp->lock, flags);
-
 	return NETDEV_TX_OK;
 }
 
Signature · 1 line
2.35.1
author maintainer
#131 lore raw

PATCH 129/338 hamradio: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 3727f742915f04f6fc550b80cf406999bd4e90d0 ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal.

In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs, so replace it with dev_kfree_skb_irq().

In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed queue length, so replace it with dev_kfree_skb_irq().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/net/hamradio/scc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/hamradio/scc.c +3 -3
index 295f267b73ea..dd7b6caee4a7 100644
@@ -299,12 +299,12 @@ static inline void scc_discard_buffers(struct scc_channel *scc)
 	spin_lock_irqsave(&scc->lock, flags);	
 	if (scc->tx_buff != NULL)
 	{
-		dev_kfree_skb(scc->tx_buff);
+		dev_kfree_skb_irq(scc->tx_buff);
 		scc->tx_buff = NULL;
 	}
 	
 	while (!skb_queue_empty(&scc->tx_queue))
-		dev_kfree_skb(skb_dequeue(&scc->tx_queue));
+		dev_kfree_skb_irq(skb_dequeue(&scc->tx_queue));
 
 	spin_unlock_irqrestore(&scc->lock, flags);
 }
@@ -1666,7 +1666,7 @@ static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev)
 	if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
 		struct sk_buff *skb_del;
 		skb_del = skb_dequeue(&scc->tx_queue);
-		dev_kfree_skb(skb_del);
+		dev_kfree_skb_irq(skb_del);
 	}
 	skb_queue_tail(&scc->tx_queue, skb);
 	netif_trans_update(dev);
Signature · 1 line
2.35.1
author maintainer
#132 lore raw

PATCH 130/338 net: amd: lance: dont call dev_kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 6151d105dfce8c23edf30eed35e97f3d9b96a35c ]

It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled.

It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal.

In these two cases, dev_kfree_skb() is called consume the xmited SKB, so replace it with dev_consume_skb_irq().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/net/ethernet/amd/atarilance.c | 2 +-
 drivers/net/ethernet/amd/lance.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/amd/atarilance.c +1 -1
index d3d44e07afbc..414b990827e8 100644
@@ -825,7 +825,7 @@ lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	lp->memcpy_f( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
 	head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
 	dev->stats.tx_bytes += skb->len;
-	dev_kfree_skb( skb );
+	dev_consume_skb_irq(skb);
 	lp->cur_tx++;
 	while( lp->cur_tx >= TX_RING_SIZE && lp->dirty_tx >= TX_RING_SIZE ) {
 		lp->cur_tx -= TX_RING_SIZE;
drivers/net/ethernet/amd/lance.c +1 -1
index 12a6a93d221b..45c15c6ffc1b 100644
@@ -997,7 +997,7 @@ static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
 		skb_copy_from_linear_data(skb, &lp->tx_bounce_buffs[entry], skb->len);
 		lp->tx_ring[entry].base =
 			((u32)isa_virt_to_bus((lp->tx_bounce_buffs + entry)) & 0xffffff) | 0x83000000;
-		dev_kfree_skb(skb);
+		dev_consume_skb_irq(skb);
 	} else {
 		lp->tx_skbuff[entry] = skb;
 		lp->tx_ring[entry].base = ((u32)isa_virt_to_bus(skb->data) & 0xffffff) | 0x83000000;
Signature · 1 line
2.35.1
author maintainer
#133 lore raw

PATCH 131/338 net: amd-xgbe: Check only the minimum speed for active/passive cables

In reply to Greg Kroah-Hartman

From: Tom Lendacky <[email protected]>

[ Upstream commit f8ab263d4d48e6dab752029bf562f20a2ee630ed ]

There are cables that exist that can support speeds in excess of 10GbE. The driver, however, restricts the EEPROM advertised nominal bitrate to a specific range, which can prevent usage of cables that can support, for example, up to 25GbE.

Rather than checking that an active or passive cable supports a specific range, only check for a minimum supported speed.

Fixes abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
---
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c +2 -12
index 3ccdac464cf5..1a4ee90a1b8a 100644
@@ -234,10 +234,7 @@ enum xgbe_sfp_speed {
 
 #define XGBE_SFP_BASE_BR			12
 #define XGBE_SFP_BASE_BR_1GBE_MIN		0x0a
-#define XGBE_SFP_BASE_BR_1GBE_MAX		0x0d
 #define XGBE_SFP_BASE_BR_10GBE_MIN		0x64
-#define XGBE_SFP_BASE_BR_10GBE_MAX		0x68
-#define XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX	0x78
 
 #define XGBE_SFP_BASE_CU_CABLE_LEN		18
 
@@ -832,29 +829,22 @@ static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
 static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom,
 				  enum xgbe_sfp_speed sfp_speed)
 {
-	u8 *sfp_base, min, max;
+	u8 *sfp_base, min;
 
 	sfp_base = sfp_eeprom->base;
 
 	switch (sfp_speed) {
 	case XGBE_SFP_SPEED_1000:
 		min = XGBE_SFP_BASE_BR_1GBE_MIN;
-		max = XGBE_SFP_BASE_BR_1GBE_MAX;
 		break;
 	case XGBE_SFP_SPEED_10000:
 		min = XGBE_SFP_BASE_BR_10GBE_MIN;
-		if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
-			   XGBE_MOLEX_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN) == 0)
-			max = XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX;
-		else
-			max = XGBE_SFP_BASE_BR_10GBE_MAX;
 		break;
 	default:
 		return false;
 	}
 
-	return ((sfp_base[XGBE_SFP_BASE_BR] >= min) &&
-		(sfp_base[XGBE_SFP_BASE_BR] <= max));
+	return sfp_base[XGBE_SFP_BASE_BR] >= min;
 }
 
 static void xgbe_phy_free_phy_device(struct xgbe_prv_data *pdata)
Signature · 1 line
2.35.1
author maintainer
#134 lore raw

PATCH 132/338 net: lan9303: Fix read error execution path

In reply to Greg Kroah-Hartman

From: Jerry Ray <[email protected]>

[ Upstream commit 8964916d206071b058c6351f88b1966bd58cbde0 ]

This patch fixes an issue where a read failure of a port statistic counter will return unknown results. While it is highly unlikely the read will ever fail, it is much cleaner to return a zero for the stat count.

Fixes a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
---
 drivers/net/dsa/lan9303-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/dsa/lan9303-core.c +3 -1
index 10d1c08ffeea..989a0cd39f7a 100644
@@ -721,9 +721,11 @@ static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port,
 		ret = lan9303_read_switch_port(
 			chip, port, lan9303_mib[u].offset, &reg);
 
-		if (ret)
+		if (ret) {
 			dev_warn(chip->dev, "Reading status port %d reg %u failed\n",
 				 port, lan9303_mib[u].offset);
+			reg = 0;
+		}
 		data[u] = reg;
 	}
 }
Signature · 1 line
2.35.1
author maintainer
#135 lore raw

PATCH 133/338 ntb_netdev: Use dev_kfree_skb_any() in interrupt context

In reply to Greg Kroah-Hartman

From: Eric Pilmore <[email protected]>

[ Upstream commit 5f7d78b2b12a9d561f48fa00bab29b40f4616dad ]

TX/RX callback handlers (ntb_netdev_tx_handler(), ntb_netdev_rx_handler()) can be called in interrupt context via the DMA framework when the respective DMA operations have completed. As such, any calls by these routines to free skb's, should use the interrupt context safe dev_kfree_skb_any() function.

Previously, these callback handlers would call the interrupt unsafe version of dev_kfree_skb(). This has not presented an issue on Intel IOAT DMA engines as that driver utilizes tasklets rather than a hard interrupt handler, like the AMD PTDMA DMA driver. On AMD systems, a kernel WARNING message is encountered, which is being issued from skb_release_head_state() due to in_hardirq() being true.

Besides the user visible WARNING from the kernel, the other symptom of this bug was that TCP/IP performance across the ntb_netdev interface was very poor, i.e. approximately an order of magnitude below what was expected. With the repair to use dev_kfree_skb_any(), kernel WARNINGs from skb_release_head_state() ceased and TCP/IP performance, as measured by iperf, was on par with expected results, approximately 20 Gb/s on AMD Milan based server. Note that this performance is comparable with Intel based servers.

Fixes 765ccc7bc3d91 ("ntb_netdev: correct skb leak")
Fixes 548c237c0a997 ("net: Add support for NTB virtual ethernet device")
---
 drivers/net/ntb_netdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ntb_netdev.c +2 -2
index 5f941e20f199..beab00c273b2 100644
@@ -140,7 +140,7 @@ static void ntb_netdev_rx_handler(struct ntb_transport_qp *qp, void *qp_data,
 enqueue_again:
 	rc = ntb_transport_rx_enqueue(qp, skb, skb->data, ndev->mtu + ETH_HLEN);
 	if (rc) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		ndev->stats.rx_errors++;
 		ndev->stats.rx_fifo_errors++;
 	}
@@ -195,7 +195,7 @@ static void ntb_netdev_tx_handler(struct ntb_transport_qp *qp, void *qp_data,
 		ndev->stats.tx_aborted_errors++;
 	}
 
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 
 	if (ntb_transport_tx_free_entry(dev->qp) >= tx_start) {
 		/* Make sure anybody stopping the queue after this sees the new
Signature · 1 line
2.35.1
author maintainer
#136 lore raw

PATCH 134/338 Bluetooth: btusb: dont call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit b15a6bd3c80c77faec8317319b97f976b1a08332 ]

It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly")
---
 drivers/bluetooth/btusb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/bluetooth/btusb.c +3 -3
index 40db5c400519..27d26ef70dcc 100644
@@ -490,13 +490,13 @@ static inline void btusb_free_frags(struct btusb_data *data)
 
 	spin_lock_irqsave(&data->rxlock, flags);
 
-	kfree_skb(data->evt_skb);
+	dev_kfree_skb_irq(data->evt_skb);
 	data->evt_skb = NULL;
 
-	kfree_skb(data->acl_skb);
+	dev_kfree_skb_irq(data->acl_skb);
 	data->acl_skb = NULL;
 
-	kfree_skb(data->sco_skb);
+	dev_kfree_skb_irq(data->sco_skb);
 	data->sco_skb = NULL;
 
 	spin_unlock_irqrestore(&data->rxlock, flags);
Signature · 1 line
2.35.1
author maintainer
#137 lore raw

PATCH 135/338 Bluetooth: hci_qca: dont call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit df4cfc91208e0a98f078223793f5871b1a82cc54 ]

It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART")
---
 drivers/bluetooth/hci_qca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/hci_qca.c +1 -1
index a6173ddfb5a7..b802c012b495 100644
@@ -715,7 +715,7 @@ static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 	default:
 		BT_ERR("Illegal tx state: %d (losing packet)",
 		       qca->tx_ibs_state);
-		kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 		break;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#138 lore raw

PATCH 136/338 Bluetooth: hci_h5: dont call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 383630cc6758d619874c2e8bb2f68a61f3f9ef6e ]

It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending")
---
 drivers/bluetooth/hci_h5.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/hci_h5.c +1 -1
index c0e4e26dc30d..0a111bee975d 100644
@@ -264,7 +264,7 @@ static void h5_pkt_cull(struct h5 *h5)
 			break;
 
 		__skb_unlink(skb, &h5->unack);
-		kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 	}
 
 	if (skb_queue_empty(&h5->unack))
Signature · 1 line
2.35.1
author maintainer
#139 lore raw

PATCH 137/338 Bluetooth: hci_bcsp: dont call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 7b503e339c1a80bf0051ec2d19c3bc777014ac61 ]

It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/bluetooth/hci_bcsp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/hci_bcsp.c +1 -1
index ee6c403de6af..aad29ebad9ed 100644
@@ -392,7 +392,7 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp)
 		i++;
 
 		__skb_unlink(skb, &bcsp->unack);
-		kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 	}
 
 	if (skb_queue_empty(&bcsp->unack))
Signature · 1 line
2.35.1
author maintainer
#140 lore raw

PATCH 138/338 Bluetooth: hci_core: dont call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 39c1eb6fcbae8ce9bb71b2ac5cb609355a2b181b ]

It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes 9238f36a5a50 ("Bluetooth: Add request cmd_complete and cmd_status functions")
---
 net/bluetooth/hci_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/hci_core.c +1 -1
index a6f186a04fe7..81a151ca4a24 100644
@@ -4216,7 +4216,7 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
 			*req_complete_skb = bt_cb(skb)->hci.req_complete_skb;
 		else
 			*req_complete = bt_cb(skb)->hci.req_complete;
-		kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 	}
 	spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
 }
Signature · 1 line
2.35.1
author maintainer
#141 lore raw

PATCH 139/338 Bluetooth: RFCOMM: dont call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 0ba18967d4544955b2eff2fbc4f2a8750c4df90a ]

It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave().

Fixes 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg")
---
 net/bluetooth/rfcomm/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/rfcomm/core.c +1 -1
index 3f7d042a09b4..3d1287d02fdd 100644
@@ -593,7 +593,7 @@ int rfcomm_dlc_send(struct rfcomm_dlc *d, struct sk_buff *skb)
 
 		ret = rfcomm_dlc_send_frag(d, frag);
 		if (ret < 0) {
-			kfree_skb(frag);
+			dev_kfree_skb_irq(frag);
 			goto unlock;
 		}
 
Signature · 1 line
2.35.1
author maintainer
#142 lore raw

PATCH 140/338 stmmac: fix potential division by 0

In reply to Greg Kroah-Hartman

From: Piergiorgio Beruto <[email protected]>

[ Upstream commit ede5a389852d3640a28e7187fb32b7f204380901 ]

When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter().

Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below.

[   95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[   95.095964] dwmac1000: Master AXI performs any burst length
[   95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[   95.109428] Division by zero in kernel.
[   95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[   95.123686] Hardware name: Altera SOCFPGA
[   95.127695]  unwind_backtrace from show_stack+0x10/0x14
[   95.132938]  show_stack from dump_stack_lvl+0x40/0x4c
[   95.137992]  dump_stack_lvl from Ldiv0+0x8/0x10
[   95.142527]  Ldiv0 from __aeabi_uidivmod+0x8/0x18
[   95.147232]  __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[   95.152552]  div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[   95.158826]  stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[   95.165533]  stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[   95.171117]  __stmmac_open from stmmac_open+0x30/0x44
[   95.176182]  stmmac_open from __dev_open+0x11c/0x134
[   95.181172]  __dev_open from __dev_change_flags+0x168/0x17c
[   95.186750]  __dev_change_flags from dev_change_flags+0x14/0x50
[   95.192662]  dev_change_flags from devinet_ioctl+0x2b4/0x604
[   95.198321]  devinet_ioctl from inet_ioctl+0x1ec/0x214
[   95.203462]  inet_ioctl from sock_ioctl+0x14c/0x3c4
[   95.208354]  sock_ioctl from vfs_ioctl+0x20/0x38
[   95.212984]  vfs_ioctl from sys_ioctl+0x250/0x844
[   95.217691]  sys_ioctl from ret_fast_syscall+0x0/0x4c
[   95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[   95.227790] 1fa0:                   00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[   95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[   95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 3 ++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h      | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +2 -1
index ccf7381c8bae..8f2bbc1e92d8 100644
@@ -53,7 +53,8 @@ static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr,
 	if (!(value & PTP_TCR_TSCTRLSSR))
 		data = (data * 1000) / 465;
 
-	data &= PTP_SSIR_SSINC_MASK;
+	if (data > PTP_SSIR_SSINC_MAX)
+		data = PTP_SSIR_SSINC_MAX;
 
 	reg_value = data;
 	if (gmac4)
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h +1 -1
index f4b31d69f60e..36b58c4866e6 100644
@@ -65,7 +65,7 @@
 #define	PTP_TCR_TSENMACADDR	BIT(18)
 
 /* SSIR defines */
-#define	PTP_SSIR_SSINC_MASK		0xff
+#define	PTP_SSIR_SSINC_MAX		0xff
 #define	GMAC4_PTP_SSIR_SSINC_SHIFT	16
 
 #endif	/* __STMMAC_PTP_H__ */
Signature · 1 line
2.35.1
author maintainer
#143 lore raw

PATCH 141/338 apparmor: fix a memleak in multi_transaction_new()

In reply to Greg Kroah-Hartman

From: Gaosheng Cui <[email protected]>

[ Upstream commit c73275cf6834787ca090317f1d20dbfa3b7f05aa ]

In multi_transaction_new(), the variable t is not freed or passed out on the failure of copy_from_user(t->data, buf, size), which could lead to a memleak.

Fix this bug by adding a put_multi_transaction(t) in the error path.

Fixes 1dea3b41e84c5 ("apparmor: speed up transactional queries")
---
 security/apparmor/apparmorfs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
security/apparmor/apparmorfs.c +3 -1
index afd3e06e8fdd..91f636c353e5 100644
@@ -874,8 +874,10 @@ static struct multi_transaction *multi_transaction_new(struct file *file,
 	if (!t)
 		return ERR_PTR(-ENOMEM);
 	kref_init(&t->count);
-	if (copy_from_user(t->data, buf, size))
+	if (copy_from_user(t->data, buf, size)) {
+		put_multi_transaction(t);
 		return ERR_PTR(-EFAULT);
+	}
 
 	return t;
 }
Signature · 1 line
2.35.1
author maintainer
#144 lore raw

PATCH 142/338 PCI: Check for alloc failure in pci_request_irq()

In reply to Greg Kroah-Hartman

From: Zeng Heng <[email protected]>

[ Upstream commit 2d9cd957d40c3ac491b358e7cff0515bb07a3a9c ]

When kvasprintf() fails to allocate memory, it returns a NULL pointer. Return error from pci_request_irq() so we don't dereference it.

[bhelgaas: commit log]
Fixes 704e8953d3e9 ("PCI/irq: Add pci_request_irq() and pci_free_irq() helpers")
---
 drivers/pci/irq.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pci/irq.c +2 -0
index 10929cd43d5d..a40e65ee4839 100644
@@ -91,6 +91,8 @@ int pci_request_irq(struct pci_dev *dev, unsigned int nr, irq_handler_t handler,
 	va_start(ap, fmt);
 	devname = kvasprintf(GFP_KERNEL, fmt, ap);
 	va_end(ap);
+	if (!devname)
+		return -ENOMEM;
 
 	ret = request_threaded_irq(pci_irq_vector(dev, nr), handler, thread_fn,
 			IRQF_SHARED, devname, dev_id);
Signature · 1 line
2.35.1
author maintainer
#145 lore raw

PATCH 143/338 RDMA/hfi: Decrease PCI device reference count in error path

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 9b51d072da1d27e1193e84708201c48e385ad912 ]

pci_get_device() will increase the reference count for the returned pci_dev, and also decrease the reference count for the input parameter *from* if it is not NULL.

If we break out the loop in node_affinity_init() with 'dev' not NULL, we need to call pci_dev_put() to decrease the reference count. Add missing pci_dev_put() in error path.

Fixes c513de490f80 ("IB/hfi1: Invalid NUMA node information can cause a divide by zero")
---
 drivers/infiniband/hw/hfi1/affinity.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/hw/hfi1/affinity.c +2 -0
index b197e925fe36..4cc7f67ea54c 100644
@@ -165,6 +165,8 @@ int node_affinity_init(void)
 	for (node = 0; node < node_affinity.num_possible_nodes; node++)
 		hfi1_per_node_cntr[node] = 1;
 
+	pci_dev_put(dev);
+
 	return 0;
 }
 
Signature · 1 line
2.35.1
author maintainer
#146 lore raw

PATCH 144/338 RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed

In reply to Greg Kroah-Hartman

From: Zhang Xiaoxu <[email protected]>

[ Upstream commit f67376d801499f4fa0838c18c1efcad8840e550d ]

There is a null-ptr-deref when mount.cifs over rdma:

  BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
  Read of size 8 at addr 0000000000000018 by task mount.cifs/3046

  CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   kasan_report+0xad/0x130
   rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
   execute_in_process_context+0x25/0x90
   __rxe_cleanup+0x101/0x1d0 [rdma_rxe]
   rxe_create_qp+0x16a/0x180 [rdma_rxe]
   create_qp.part.0+0x27d/0x340
   ib_create_qp_kernel+0x73/0x160
   rdma_create_qp+0x100/0x230
   _smbd_get_connection+0x752/0x20f0
   smbd_get_connection+0x21/0x40
   cifs_get_tcp_session+0x8ef/0xda0
   mount_get_conns+0x60/0x750
   cifs_mount+0x103/0xd00
   cifs_smb3_do_mount+0x1dd/0xcb0
   smb3_get_tree+0x1d5/0x300
   vfs_get_tree+0x41/0xf0
   path_mount+0x9b3/0xdd0
   __x64_sys_mount+0x190/0x1d0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

The root cause of the issue is the socket create failed in rxe_qp_init_req().

So move the reset rxe_qp_do_cleanup() after the NULL ptr check.

---
 drivers/infiniband/sw/rxe/rxe_qp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/infiniband/sw/rxe/rxe_qp.c +3 -3
index 2391b0e698a9..9bd99bd693fd 100644
@@ -866,12 +866,12 @@ static void rxe_qp_do_cleanup(struct work_struct *work)
 		qp->resp.mr = NULL;
 	}
 
-	if (qp_type(qp) == IB_QPT_RC)
-		sk_dst_reset(qp->sk->sk);
-
 	free_rd_atomic_resources(qp);
 
 	if (qp->sk) {
+		if (qp_type(qp) == IB_QPT_RC)
+			sk_dst_reset(qp->sk->sk);
+
 		kernel_sock_shutdown(qp->sk, SHUT_RDWR);
 		sock_release(qp->sk);
 	}
Signature · 1 line
2.35.1
author maintainer
#147 lore raw

PATCH 145/338 scsi: hpsa: Fix error handling in hpsa_add_sas_host()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 4ef174a3ad9b5d73c1b6573e244ebba2b0d86eac ]

hpsa_sas_port_add_phy() does:
...
sas_phy_add() -> may return error here
sas_port_add_phy()
...

Whereas hpsa_free_sas_phy() does:
...
sas_port_delete_phy()
sas_phy_delete()
...

If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be called to free the memory because the port and the phy have not been added yet.

Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel crash in this case.

---
 drivers/scsi/hpsa.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/hpsa.c +2 -1
index 9ad9910cc085..a63ff9301a69 100644
@@ -9452,7 +9452,8 @@ static int hpsa_add_sas_host(struct ctlr_info *h)
 	return 0;
 
 free_sas_phy:
-	hpsa_free_sas_phy(hpsa_sas_phy);
+	sas_phy_free(hpsa_sas_phy->phy);
+	kfree(hpsa_sas_phy);
 free_sas_port:
 	hpsa_free_sas_port(hpsa_sas_port);
 free_sas_node:
Signature · 1 line
2.35.1
author maintainer
#148 lore raw

PATCH 146/338 scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit fda34a5d304d0b98cc967e8763b52221b66dc202 ]

If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in sas_end_device_alloc() needs to be freed. Address this by calling sas_rphy_free() in the error path.

---
 drivers/scsi/hpsa.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/hpsa.c +3 -1
index a63ff9301a69..6b25c5ce13ed 100644
@@ -9489,10 +9489,12 @@ static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
 
 	rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
 	if (rc)
-		goto free_sas_port;
+		goto free_sas_rphy;
 
 	return 0;
 
+free_sas_rphy:
+	sas_rphy_free(rphy);
 free_sas_port:
 	hpsa_free_sas_port(hpsa_sas_port);
 	device->sas_port = NULL;
Signature · 1 line
2.35.1
author maintainer
#149 lore raw

PATCH 147/338 scsi: fcoe: Fix possible name leak when device_register() fails

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 47b6a122c7b69a876c7ee2fc064a26b09627de9d ]

If device_register() returns an error, the name allocated by dev_set_name() needs to be freed. As the comment of device_register() says, one should use put_device() to give up the reference in the error path. Fix this by calling put_device(), then the name can be freed in kobject_cleanup().

The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the error path can be removed.

The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error label, just return NULL after calling put_device().

---
 drivers/scsi/fcoe/fcoe_sysfs.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/scsi/fcoe/fcoe_sysfs.c +10 -9
index 5c8310bade61..dab025e3ed27 100644
@@ -831,14 +831,15 @@ struct fcoe_ctlr_device *fcoe_ctlr_device_add(struct device *parent,
 
 	dev_set_name(&ctlr->dev, "ctlr_%d", ctlr->id);
 	error = device_register(&ctlr->dev);
-	if (error)
-		goto out_del_q2;
+	if (error) {
+		destroy_workqueue(ctlr->devloss_work_q);
+		destroy_workqueue(ctlr->work_q);
+		put_device(&ctlr->dev);
+		return NULL;
+	}
 
 	return ctlr;
 
-out_del_q2:
-	destroy_workqueue(ctlr->devloss_work_q);
-	ctlr->devloss_work_q = NULL;
 out_del_q:
 	destroy_workqueue(ctlr->work_q);
 	ctlr->work_q = NULL;
@@ -1037,16 +1038,16 @@ struct fcoe_fcf_device *fcoe_fcf_device_add(struct fcoe_ctlr_device *ctlr,
 	fcf->selected = new_fcf->selected;
 
 	error = device_register(&fcf->dev);
-	if (error)
-		goto out_del;
+	if (error) {
+		put_device(&fcf->dev);
+		goto out;
+	}
 
 	fcf->state = FCOE_FCF_STATE_CONNECTED;
 	list_add_tail(&fcf->peers, &ctlr->fcfs);
 
 	return fcf;
 
-out_del:
-	kfree(fcf);
 out:
 	return NULL;
 }
Signature · 1 line
2.35.1
author maintainer
#150 lore raw

PATCH 148/338 scsi: ipr: Fix WARNING in ipr_init()

In reply to Greg Kroah-Hartman

From: Shang XiaoJing <[email protected]>

[ Upstream commit e6f108bffc3708ddcff72324f7d40dfcd0204894 ]

ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails.

notifier callback ipr_halt [ipr] already registered

WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29
notifier_chain_register+0x16d/0x230
Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore
led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm
drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks
agpgart cfbft
CPU: 3 PID: 299 Comm: modprobe Tainted: G        W
6.1.0-rc1-00190-g39508d23b672-dirty #332
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:notifier_chain_register+0x16d/0x230
Call Trace:
 <TASK>
 __blocking_notifier_chain_register+0x73/0xb0
 ipr_init+0x30/0x1000 [ipr]
 do_one_initcall+0xdb/0x480
 do_init_module+0x1cf/0x680
 load_module+0x6a50/0x70a0
 __do_sys_finit_module+0x12f/0x1c0
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter")
---
 drivers/scsi/ipr.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/scsi/ipr.c +9 -1
index 99b37e19feca..86e2d3033a2d 100644
@@ -10858,11 +10858,19 @@ static struct notifier_block ipr_notifier = {
  **/
 static int __init ipr_init(void)
 {
+	int rc;
+
 	ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
 		 IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
 
 	register_reboot_notifier(&ipr_notifier);
-	return pci_register_driver(&ipr_driver);
+	rc = pci_register_driver(&ipr_driver);
+	if (rc) {
+		unregister_reboot_notifier(&ipr_notifier);
+		return rc;
+	}
+
+	return 0;
 }
 
 /**
Signature · 1 line
2.35.1
author maintainer
#151 lore raw

PATCH 149/338 scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails

In reply to Greg Kroah-Hartman

From: Chen Zhongjin <[email protected]>

[ Upstream commit 4155658cee394b22b24c6d64e49247bf26d95b92 ]

fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed &fcoe_sw_transport on fcoe_transports list. This causes panic when reinserting module.

 BUG: unable to handle page fault for address: fffffbfff82e2213
 RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
 Call Trace:
  <TASK>
  do_one_initcall+0xd0/0x4e0
  load_module+0x5eee/0x7210
  ...
Fixes 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
---
 drivers/scsi/fcoe/fcoe.c | 1 +
 1 file changed, 1 insertion(+)
drivers/scsi/fcoe/fcoe.c +1 -0
index 99b46dc87a37..f94936384b06 100644
@@ -2531,6 +2531,7 @@ static int __init fcoe_init(void)
 
 out_free:
 	mutex_unlock(&fcoe_config_mutex);
+	fcoe_transport_detach(&fcoe_sw_transport);
 out_destroy:
 	destroy_workqueue(fcoe_wq);
 	return rc;
Signature · 1 line
2.35.1
author maintainer
#152 lore raw

PATCH 150/338 scsi: snic: Fix possible UAF in snic_tgt_create()

In reply to Greg Kroah-Hartman

From: Gaosheng Cui <[email protected]>

[ Upstream commit e118df492320176af94deec000ae034cc92be754 ]

Smatch reports a warning as follows:

drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list

If device_add() fails in snic_tgt_create(), tgt will be freed, but tgt->list will not be removed from snic->disc.tgt_list, then list traversal may cause UAF.

Remove from snic->disc.tgt_list before free().

---
 drivers/scsi/snic/snic_disc.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/snic/snic_disc.c +3 -0
index b106596cc0cf..69c5e26a9d5b 100644
@@ -317,6 +317,9 @@ snic_tgt_create(struct snic *snic, struct snic_tgt_id *tgtid)
 			      ret);
 
 		put_device(&snic->shost->shost_gendev);
+		spin_lock_irqsave(snic->shost->host_lock, flags);
+		list_del(&tgt->list);
+		spin_unlock_irqrestore(snic->shost->host_lock, flags);
 		kfree(tgt);
 		tgt = NULL;
 
Signature · 1 line
2.35.1
author maintainer
#153 lore raw

PATCH 151/338 RDMA/hfi1: Fix error return code in parse_platform_config()

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 725349f8ba1e78a146c6ff8f3ee5e2712e517106 ]

In the previous iteration of the while loop, the "ret" may have been assigned a value of 0, so the error return code -EINVAL may have been incorrectly set to 0. To fix set valid return code before calling to goto.

Fixes 97167e813415 ("staging/rdma/hfi1: Tune for unknown channel if configuration file is absent")
---
 drivers/infiniband/hw/hfi1/firmware.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/infiniband/hw/hfi1/firmware.c +6 -0
index c54359376cda..8499f27ca3c0 100644
@@ -1761,6 +1761,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
 
 	if (!dd->platform_config.data) {
 		dd_dev_err(dd, "%s: Missing config file\n", __func__);
+		ret = -EINVAL;
 		goto bail;
 	}
 	ptr = (u32 *)dd->platform_config.data;
@@ -1769,6 +1770,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
 	ptr++;
 	if (magic_num != PLATFORM_CONFIG_MAGIC_NUM) {
 		dd_dev_err(dd, "%s: Bad config file\n", __func__);
+		ret = -EINVAL;
 		goto bail;
 	}
 
@@ -1779,6 +1781,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
 	if (file_length > dd->platform_config.size) {
 		dd_dev_info(dd, "%s:File claims to be larger than read size\n",
 			    __func__);
+		ret = -EINVAL;
 		goto bail;
 	} else if (file_length < dd->platform_config.size) {
 		dd_dev_info(dd,
@@ -1798,6 +1801,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
 			dd_dev_err(dd, "%s: Failed validation at offset %ld\n",
 				   __func__, (ptr - (u32 *)
 					      dd->platform_config.data));
+			ret = -EINVAL;
 			goto bail;
 		}
 
@@ -1844,6 +1848,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
 					   __func__, table_type,
 					   (ptr - (u32 *)
 					    dd->platform_config.data));
+				ret = -EINVAL;
 				goto bail; /* We don't trust this file now */
 			}
 			pcfgcache->config_tables[table_type].table = ptr;
@@ -1868,6 +1873,7 @@ int parse_platform_config(struct hfi1_devdata *dd)
 					   __func__, table_type,
 					   (ptr -
 					    (u32 *)dd->platform_config.data));
+				ret = -EINVAL;
 				goto bail; /* We don't trust this file now */
 			}
 			pcfgcache->config_tables[table_type].table_metadata =
Signature · 1 line
2.35.1
author maintainer
#154 lore raw

PATCH 152/338 orangefs: Fix sysfs not cleanup when dev init failed

In reply to Greg Kroah-Hartman

From: Zhang Xiaoxu <[email protected]>

[ Upstream commit ea60a4ad0cf88b411cde6888b8c890935686ecd7 ]

When the dev init failed, should cleanup the sysfs, otherwise, the module will never be loaded since can not create duplicate sysfs directory:

sysfs: cannot create duplicate filename '/fs/orangefs'

  CPU: 1 PID: 6549 Comm: insmod Tainted: G        W          6.0.0+ #44
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   sysfs_warn_dup.cold+0x17/0x24
   sysfs_create_dir_ns+0x16d/0x180
   kobject_add_internal+0x156/0x3a0
   kobject_init_and_add+0xcf/0x120
   orangefs_sysfs_init+0x7e/0x3a0 [orangefs]
   orangefs_init+0xfe/0x1000 [orangefs]
   do_one_initcall+0x87/0x2a0
   do_init_module+0xdf/0x320
   load_module+0x2f98/0x3330
   __do_sys_finit_module+0x113/0x1b0
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

kobject_add_internal failed for orangefs with -EEXIST, don't try to register things with the same name in the same directory.

Fixes 2f83ace37181 ("orangefs: put register_chrdev immediately before register_filesystem")
---
 fs/orangefs/orangefs-mod.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
fs/orangefs/orangefs-mod.c +4 -4
index 85ef87245a87..c8818163e392 100644
@@ -141,7 +141,7 @@ static int __init orangefs_init(void)
 		gossip_err("%s: could not initialize device subsystem %d!\n",
 			   __func__,
 			   ret);
-		goto cleanup_device;
+		goto cleanup_sysfs;
 	}
 
 	ret = register_filesystem(&orangefs_fs_type);
@@ -153,11 +153,11 @@ static int __init orangefs_init(void)
 		goto out;
 	}
 
-	orangefs_sysfs_exit();
-
-cleanup_device:
 	orangefs_dev_cleanup();
 
+cleanup_sysfs:
+	orangefs_sysfs_exit();
+
 sysfs_init_failed:
 
 debugfs_init_failed:
Signature · 1 line
2.35.1
author maintainer
#155 lore raw

PATCH 153/338 crypto: img-hash - Fix variable dereferenced before check hdev->req

In reply to Greg Kroah-Hartman

From: Gaosheng Cui <[email protected]>

[ Upstream commit 04ba54e5af8f8f0137b08cb51a0b3a2e1ea46c94 ]

Smatch report warning as follows:

drivers/crypto/img-hash.c:366 img_hash_dma_task() warn: variable dereferenced before check 'hdev->req'

Variable dereferenced should be done after check 'hdev->req', fix it.

Fixes d358f1abbf71 ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Fixes 10badea259fa ("crypto: img-hash - Fix null pointer exception")
---
 drivers/crypto/img-hash.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/crypto/img-hash.c +6 -2
index b87000a0a01c..f70923643a97 100644
@@ -359,12 +359,16 @@ static int img_hash_dma_init(struct img_hash_dev *hdev)
 static void img_hash_dma_task(unsigned long d)
 {
 	struct img_hash_dev *hdev = (struct img_hash_dev *)d;
-	struct img_hash_request_ctx *ctx = ahash_request_ctx(hdev->req);
+	struct img_hash_request_ctx *ctx;
 	u8 *addr;
 	size_t nbytes, bleft, wsend, len, tbc;
 	struct scatterlist tsg;
 
-	if (!hdev->req || !ctx->sg)
+	if (!hdev->req)
+		return;
+
+	ctx = ahash_request_ctx(hdev->req);
+	if (!ctx->sg)
 		return;
 
 	addr = sg_virt(ctx->sg);
Signature · 1 line
2.35.1
author maintainer
#156 lore raw

PATCH 154/338 hwrng: amd - Fix PCI device refcount leak

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit ecadb5b0111ea19fc7c240bb25d424a94471eb7d ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error path.

Fixes 96d63c0297cc ("[PATCH] Add AMD HW RNG driver")
---
 drivers/char/hw_random/amd-rng.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)
drivers/char/hw_random/amd-rng.c +13 -5
index 9959c762da2f..db3dd467194c 100644
@@ -143,15 +143,19 @@ static int __init mod_init(void)
 found:
 	err = pci_read_config_dword(pdev, 0x58, &pmbase);
 	if (err)
-		return err;
+		goto put_dev;
 
 	pmbase &= 0x0000FF00;
-	if (pmbase == 0)
-		return -EIO;
+	if (pmbase == 0) {
+		err = -EIO;
+		goto put_dev;
+	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
+	if (!priv) {
+		err = -ENOMEM;
+		goto put_dev;
+	}
 
 	if (!request_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE, DRV_NAME)) {
 		dev_err(&pdev->dev, DRV_NAME " region 0x%x already in use!\n",
@@ -185,6 +189,8 @@ static int __init mod_init(void)
 	release_region(pmbase + PMBASE_OFFSET, PMBASE_SIZE);
 out:
 	kfree(priv);
+put_dev:
+	pci_dev_put(pdev);
 	return err;
 }
 
@@ -200,6 +206,8 @@ static void __exit mod_exit(void)
 
 	release_region(priv->pmbase + PMBASE_OFFSET, PMBASE_SIZE);
 
+	pci_dev_put(priv->pcidev);
+
 	kfree(priv);
 }
 
Signature · 1 line
2.35.1
author maintainer
#157 lore raw

PATCH 155/338 hwrng: geode - Fix PCI device refcount leak

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 9f6ec8dc574efb7f4f3d7ee9cd59ae307e78f445 ]

for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL.

If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path.

Fixes ef5d862734b8 ("[PATCH] Add Geode HW RNG driver")
---
 drivers/char/hw_random/geode-rng.c | 36 +++++++++++++++++++++++-------
 1 file changed, 28 insertions(+), 8 deletions(-)
drivers/char/hw_random/geode-rng.c +28 -8
index e1d421a36a13..207272979f23 100644
@@ -51,6 +51,10 @@ static const struct pci_device_id pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, pci_tbl);
 
+struct amd_geode_priv {
+	struct pci_dev *pcidev;
+	void __iomem *membase;
+};
 
 static int geode_rng_data_read(struct hwrng *rng, u32 *data)
 {
@@ -90,6 +94,7 @@ static int __init mod_init(void)
 	const struct pci_device_id *ent;
 	void __iomem *mem;
 	unsigned long rng_base;
+	struct amd_geode_priv *priv;
 
 	for_each_pci_dev(pdev) {
 		ent = pci_match_id(pci_tbl, pdev);
@@ -97,17 +102,26 @@ static int __init mod_init(void)
 			goto found;
 	}
 	/* Device not found. */
-	goto out;
+	return err;
 
 found:
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		err = -ENOMEM;
+		goto put_dev;
+	}
+
 	rng_base = pci_resource_start(pdev, 0);
 	if (rng_base == 0)
-		goto out;
+		goto free_priv;
 	err = -ENOMEM;
 	mem = ioremap(rng_base, 0x58);
 	if (!mem)
-		goto out;
-	geode_rng.priv = (unsigned long)mem;
+		goto free_priv;
+
+	geode_rng.priv = (unsigned long)priv;
+	priv->membase = mem;
+	priv->pcidev = pdev;
 
 	pr_info("AMD Geode RNG detected\n");
 	err = hwrng_register(&geode_rng);
@@ -116,20 +130,26 @@ static int __init mod_init(void)
 		       err);
 		goto err_unmap;
 	}
-out:
 	return err;
 
 err_unmap:
 	iounmap(mem);
-	goto out;
+free_priv:
+	kfree(priv);
+put_dev:
+	pci_dev_put(pdev);
+	return err;
 }
 
 static void __exit mod_exit(void)
 {
-	void __iomem *mem = (void __iomem *)geode_rng.priv;
+	struct amd_geode_priv *priv;
 
+	priv = (struct amd_geode_priv *)geode_rng.priv;
 	hwrng_unregister(&geode_rng);
-	iounmap(mem);
+	iounmap(priv->membase);
+	pci_dev_put(priv->pcidev);
+	kfree(priv);
 }
 
 module_init(mod_init);
Signature · 1 line
2.35.1
author maintainer
#158 lore raw

PATCH 156/338 IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces

In reply to Greg Kroah-Hartman

From: Dragos Tatulea <[email protected]>

[ Upstream commit dbc94a0fb81771a38733c0e8f2ea8c4fa6934dc1 ]

There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net/<ib parent interface>/create_child.
2) Using netlink with iproute.

While with sysfs the child interface has the same number of tx and rx queues as the parent, with netlink there will always be 1 tx and 1 rx queue for the child interface. That's because the get_num_tx/rx_queues() netlink ops are missing and the default value of 1 is taken for the number of queues (in rtnl_create_link()).

This change adds the get_num_tx/rx_queues() ops which allows for interfaces with multiple queues to be created over netlink. This constant only represents the max number of tx and rx queues on that net device.

---
 drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/infiniband/ulp/ipoib/ipoib_netlink.c +7 -0
index 3e44087935ae..5119bb52b469 100644
@@ -42,6 +42,11 @@ static const struct nla_policy ipoib_policy[IFLA_IPOIB_MAX + 1] = {
 	[IFLA_IPOIB_UMCAST]	= { .type = NLA_U16 },
 };
 
+static unsigned int ipoib_get_max_num_queues(void)
+{
+	return min_t(unsigned int, num_possible_cpus(), 128);
+}
+
 static int ipoib_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = ipoib_priv(dev);
@@ -170,6 +175,8 @@ static struct rtnl_link_ops ipoib_link_ops __read_mostly = {
 	.dellink	= ipoib_unregister_child_dev,
 	.get_size	= ipoib_get_size,
 	.fill_info	= ipoib_fill_info,
+	.get_num_rx_queues = ipoib_get_max_num_queues,
+	.get_num_tx_queues = ipoib_get_max_num_queues,
 };
 
 int __init ipoib_netlink_init(void)
Signature · 1 line
2.35.1
author maintainer
#159 lore raw

PATCH 157/338 drivers: dio: fix possible memory leak in dio_init()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit e63e99397b2613d50a5f4f02ed07307e67a190f1 ]

If device_register() returns error, the 'dev' and name needs be freed. Add a release function, and then call put_device() in the error path, so the name is freed in kobject_cleanup() and to the 'dev' is freed in release function.

Fixes 2e4c77bea3d8 ("m68k: dio - Kill warn_unused_result warnings")
Fixes 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
---
 drivers/dio/dio.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/dio/dio.c +8 -0
index 92e78d16b476..fcde602f4902 100644
@@ -110,6 +110,12 @@ static char dio_no_name[] = { 0 };
 
 #endif /* CONFIG_DIO_CONSTANTS */
 
+static void dio_dev_release(struct device *dev)
+{
+	struct dio_dev *ddev = container_of(dev, typeof(struct dio_dev), dev);
+	kfree(ddev);
+}
+
 int __init dio_find(int deviceid)
 {
 	/* Called to find a DIO device before the full bus scan has run.
@@ -222,6 +228,7 @@ static int __init dio_init(void)
 		dev->bus = &dio_bus;
 		dev->dev.parent = &dio_bus.dev;
 		dev->dev.bus = &dio_bus_type;
+		dev->dev.release = dio_dev_release;
 		dev->scode = scode;
 		dev->resource.start = pa;
 		dev->resource.end = pa + DIO_SIZE(scode, va);
@@ -249,6 +256,7 @@ static int __init dio_init(void)
 		if (error) {
 			pr_err("DIO: Error registering device %s\n",
 			       dev->name);
+			put_device(&dev->dev);
 			continue;
 		}
 		error = dio_create_sysfs_dev_files(dev);
Signature · 1 line
2.35.1
author maintainer
#160 lore raw

PATCH 158/338 class: fix possible memory leak in __class_register()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 8c3e8a6bdb5253b97ad532570f8b5db5f7a06407 ]

If class_add_groups() returns error, the 'cp->subsys' need be unregister, and the 'cp' need be freed.

We can not call kset_unregister() here, because the 'cls' will be freed in callback function class_release() and it's also freed in caller's error path, it will cause double free.

So fix this by calling kobject_del() and kfree_const(name) to cleanup kobject. Besides, call kfree() to free the 'cp'.

Fault injection test can trigger this:

unreferenced object 0xffff888102fa8190 (size 8):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s) hex dump (first 8 bytes):

    70 6b 74 63 64 76 64 00                          pktcdvd.
  backtrace:
    [<00000000e7c7703d>] __kmalloc_track_caller+0x1ae/0x320
    [<000000005e4d70bc>] kstrdup+0x3a/0x70
    [<00000000c2e5e85a>] kstrdup_const+0x68/0x80
    [<000000000049a8c7>] kvasprintf_const+0x10b/0x190
    [<0000000029123163>] kobject_set_name_vargs+0x56/0x150
    [<00000000747219c9>] kobject_set_name+0xab/0xe0
    [<0000000005f1ea4e>] __class_register+0x15c/0x49a

unreferenced object 0xffff888037274000 (size 1024):
comm "modprobe", pid 502, jiffies 4294906074 (age 49.296s) hex dump (first 32 bytes):

    00 40 27 37 80 88 ff ff 00 40 27 37 80 88 ff ff  .@'7.....@'7....
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
  backtrace:
    [<00000000151f9600>] kmem_cache_alloc_trace+0x17c/0x2f0
    [<00000000ecf3dd95>] __class_register+0x86/0x49a
Fixes ced6473e7486 ("driver core: class: add class_groups support")
---
 drivers/base/class.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/base/class.c +5 -0
index 52eb8e644acd..93f22fba0d5c 100644
@@ -187,6 +187,11 @@ int __class_register(struct class *cls, struct lock_class_key *key)
 	}
 	error = class_add_groups(class_get(cls), cls->class_groups);
 	class_put(cls);
+	if (error) {
+		kobject_del(&cp->subsys.kobj);
+		kfree_const(cp->subsys.kobj.name);
+		kfree(cp);
+	}
 	return error;
 }
 EXPORT_SYMBOL_GPL(__class_register);
Signature · 1 line
2.35.1
author maintainer
#161 lore raw

PATCH 159/338 vfio: platform: Do not pass return buffer to ACPI _RST method

In reply to Greg Kroah-Hartman

From: Rafael Mendonca <[email protected]>

[ Upstream commit e67e070632a665c932d534b8b800477bb3111449 ]

The ACPI _RST method has no return value, there's no need to pass a return buffer to acpi_evaluate_object().

Fixes d30daa33ec1d ("vfio: platform: call _RST method when using ACPI")
---
 drivers/vfio/platform/vfio_platform_common.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/vfio/platform/vfio_platform_common.c +1 -2
index f42acc830c24..66931f6b14e6 100644
@@ -77,12 +77,11 @@ static int vfio_platform_acpi_call_reset(struct vfio_platform_device *vdev,
 				  const char **extra_dbg)
 {
 #ifdef CONFIG_ACPI
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	struct device *dev = vdev->device;
 	acpi_handle handle = ACPI_HANDLE(dev);
 	acpi_status acpi_ret;
 
-	acpi_ret = acpi_evaluate_object(handle, "_RST", NULL, &buffer);
+	acpi_ret = acpi_evaluate_object(handle, "_RST", NULL, NULL);
 	if (ACPI_FAILURE(acpi_ret)) {
 		if (extra_dbg)
 			*extra_dbg = acpi_format_exception(acpi_ret);
Signature · 1 line
2.35.1
author maintainer
#162 lore raw

PATCH 160/338 uio: uio_dmem_genirq: Fix missing unlock in irq configuration

In reply to Greg Kroah-Hartman

From: Rafael Mendonca <[email protected]>

[ Upstream commit 9de255c461d1b3f0242b3ad1450c3323a3e00b34 ]

Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") started calling disable_irq() without holding the spinlock because it can sleep. However, that fix introduced another bug: if interrupt is already disabled and a new disable request comes in, then the spinlock is not unlocked:

root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# [   14.851538] BUG: scheduling while atomic: bash/223/0x00000002
[   14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc]
[   14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G           OE      6.0.0-rc7 #21
[   14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[   14.855664] Call Trace:
[   14.855861]  <TASK>
[   14.856025]  dump_stack_lvl+0x4d/0x67
[   14.856325]  dump_stack+0x14/0x1a
[   14.856583]  __schedule_bug.cold+0x4b/0x5c
[   14.856915]  __schedule+0xe81/0x13d0
[   14.857199]  ? idr_find+0x13/0x20
[   14.857456]  ? get_work_pool+0x2d/0x50
[   14.857756]  ? __flush_work+0x233/0x280
[   14.858068]  ? __schedule+0xa95/0x13d0
[   14.858307]  ? idr_find+0x13/0x20
[   14.858519]  ? get_work_pool+0x2d/0x50
[   14.858798]  schedule+0x6c/0x100
[   14.859009]  schedule_hrtimeout_range_clock+0xff/0x110
[   14.859335]  ? tty_write_room+0x1f/0x30
[   14.859598]  ? n_tty_poll+0x1ec/0x220
[   14.859830]  ? tty_ldisc_deref+0x1a/0x20
[   14.860090]  schedule_hrtimeout_range+0x17/0x20
[   14.860373]  do_select+0x596/0x840
[   14.860627]  ? __kernel_text_address+0x16/0x50
[   14.860954]  ? poll_freewait+0xb0/0xb0
[   14.861235]  ? poll_freewait+0xb0/0xb0
[   14.861517]  ? rpm_resume+0x49d/0x780
[   14.861798]  ? common_interrupt+0x59/0xa0
[   14.862127]  ? asm_common_interrupt+0x2b/0x40
[   14.862511]  ? __uart_start.isra.0+0x61/0x70
[   14.862902]  ? __check_object_size+0x61/0x280
[   14.863255]  core_sys_select+0x1c6/0x400
[   14.863575]  ? vfs_write+0x1c9/0x3d0
[   14.863853]  ? vfs_write+0x1c9/0x3d0
[   14.864121]  ? _copy_from_user+0x45/0x70
[   14.864526]  do_pselect.constprop.0+0xb3/0xf0
[   14.864893]  ? do_syscall_64+0x6d/0x90
[   14.865228]  ? do_syscall_64+0x6d/0x90
[   14.865556]  __x64_sys_pselect6+0x76/0xa0
[   14.865906]  do_syscall_64+0x60/0x90
[   14.866214]  ? syscall_exit_to_user_mode+0x2a/0x50
[   14.866640]  ? do_syscall_64+0x6d/0x90
[   14.866972]  ? do_syscall_64+0x6d/0x90
[   14.867286]  ? do_syscall_64+0x6d/0x90
[   14.867626]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
[   14.872959]  </TASK>

('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this)

The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and it is used in a similar manner to the "uio_pdrv_genirq" driver with respect to interrupt configuration and handling. At the time "uio_dmem_genirq" was introduced, both had the same implementation of the 'uio_info' handlers irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency issue"), which was only applied to "uio_pdrv_genirq", ended up making them a little different. That commit, among other things, changed disable_irq() to disable_irq_nosync() in the implementation of irqcontrol(). The motivation there was to avoid a deadlock between irqcontrol() and handler(), since it added a spinlock in the irq handler, and disable_irq() waits for the completion of the irq handler.

By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also avoid the sleeping-while-atomic bug that commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") was trying to fix. Thus, this fixes the missing unlock in irqcontrol() by importing the implementation of irqcontrol() handler from the "uio_pdrv_genirq" driver. In the end, it reverts commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") and change disable_irq() to disable_irq_nosync().

It is worth noting that this still does not address the concurrency issue fixed by commit 34cb27528398 ("UIO: Fix concurrency issue"). It will be addressed separately in the next commits.

Split out from commit 34cb27528398 ("UIO: Fix concurrency issue").

Fixes b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()")
---
 drivers/uio/uio_dmem_genirq.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/uio/uio_dmem_genirq.c +3 -5
index a00b4aee6c79..c25a6bcb2d21 100644
@@ -135,13 +135,11 @@ static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
 	if (irq_on) {
 		if (test_and_clear_bit(0, &priv->flags))
 			enable_irq(dev_info->irq);
-		spin_unlock_irqrestore(&priv->lock, flags);
 	} else {
-		if (!test_and_set_bit(0, &priv->flags)) {
-			spin_unlock_irqrestore(&priv->lock, flags);
-			disable_irq(dev_info->irq);
-		}
+		if (!test_and_set_bit(0, &priv->flags))
+			disable_irq_nosync(dev_info->irq);
 	}
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return 0;
 }
Signature · 1 line
2.35.1
author maintainer
#163 lore raw

PATCH 161/338 uio: uio_dmem_genirq: Fix deadlock between irq config and handling

In reply to Greg Kroah-Hartman

From: Rafael Mendonca <[email protected]>

[ Upstream commit 118b918018175d9fcd8db667f905012e986cc2c9 ]

This fixes a concurrency issue addressed in commit 34cb27528398 ("UIO: Fix concurrency issue"):

"In a SMP case there was a race condition issue between Uio_pdrv_genirq_irqcontrol() running on one CPU and irq handler on another CPU. Fix it by spin_locking shared resources access inside irq handler."

The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and it is used in a similar manner to the "uio_pdrv_genirq" driver with respect to interrupt configuration and handling. At the time "uio_dmem_genirq" was merged, both had the same implementation of the 'uio_info' handlers irqcontrol() and handler(), thus, both had the same concurrency issue mentioned by the above commit. However, the above patch was only applied to the "uio_pdrv_genirq" driver.

Split out from commit 34cb27528398 ("UIO: Fix concurrency issue").

Fixes 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
---
 drivers/uio/uio_dmem_genirq.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/uio/uio_dmem_genirq.c +4 -1
index c25a6bcb2d21..b4b7fa05b29b 100644
@@ -113,8 +113,10 @@ static irqreturn_t uio_dmem_genirq_handler(int irq, struct uio_info *dev_info)
 	 * remember the state so we can allow user space to enable it later.
 	 */
 
+	spin_lock(&priv->lock);
 	if (!test_and_set_bit(0, &priv->flags))
 		disable_irq_nosync(irq);
+	spin_unlock(&priv->lock);
 
 	return IRQ_HANDLED;
 }
@@ -128,7 +130,8 @@ static int uio_dmem_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
 	 * in the interrupt controller, but keep track of the
 	 * state to prevent per-irq depth damage.
 	 *
-	 * Serialize this operation to support multiple tasks.
+	 * Serialize this operation to support multiple tasks and concurrency
+	 * with irq handler on SMP systems.
 	 */
 
 	spin_lock_irqsave(&priv->lock, flags);
Signature · 1 line
2.35.1
author maintainer
#164 lore raw

PATCH 162/338 usb: fotg210-udc: Fix ages old endianness issues

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

[ Upstream commit 46ed6026ca2181c917c8334a82e3eaf40a6234dd ]

The code in the FOTG210 driver isn't entirely endianness-agnostic as reported by the kernel robot sparse testing. This came to the surface while moving the files around.

The driver is only used on little-endian systems, so this causes no real-world regression, but it is nice to be strict and have some compile coverage also on big endian machines, so fix it up with the right LE accessors.

---
 drivers/usb/gadget/udc/fotg210-udc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/usb/gadget/udc/fotg210-udc.c +6 -6
index 9440973cdb44..08ffbf394fe9 100644
@@ -636,10 +636,10 @@ static void fotg210_request_error(struct fotg210_udc *fotg210)
 static void fotg210_set_address(struct fotg210_udc *fotg210,
 				struct usb_ctrlrequest *ctrl)
 {
-	if (ctrl->wValue >= 0x0100) {
+	if (le16_to_cpu(ctrl->wValue) >= 0x0100) {
 		fotg210_request_error(fotg210);
 	} else {
-		fotg210_set_dev_addr(fotg210, ctrl->wValue);
+		fotg210_set_dev_addr(fotg210, le16_to_cpu(ctrl->wValue));
 		fotg210_set_cxdone(fotg210);
 	}
 }
@@ -720,17 +720,17 @@ static void fotg210_get_status(struct fotg210_udc *fotg210,
 
 	switch (ctrl->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_DEVICE:
-		fotg210->ep0_data = 1 << USB_DEVICE_SELF_POWERED;
+		fotg210->ep0_data = cpu_to_le16(1 << USB_DEVICE_SELF_POWERED);
 		break;
 	case USB_RECIP_INTERFACE:
-		fotg210->ep0_data = 0;
+		fotg210->ep0_data = cpu_to_le16(0);
 		break;
 	case USB_RECIP_ENDPOINT:
 		epnum = ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK;
 		if (epnum)
 			fotg210->ep0_data =
-				fotg210_is_epnstall(fotg210->ep[epnum])
-				<< USB_ENDPOINT_HALT;
+				cpu_to_le16(fotg210_is_epnstall(fotg210->ep[epnum])
+					    << USB_ENDPOINT_HALT);
 		else
 			fotg210_request_error(fotg210);
 		break;
Signature · 1 line
2.35.1
author maintainer
#165 lore raw

PATCH 163/338 staging: vme_user: Fix possible UAF in tsi148_dma_list_add

In reply to Greg Kroah-Hartman

From: Gaosheng Cui <[email protected]>

[ Upstream commit 357057ee55d3c99a5de5abe8150f7bca04f8e53b ]

Smatch report warning as follows:

drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn:
'&entry->list' not removed from list

In tsi148_dma_list_add(), the error path "goto err_dma" will not remove entry->list from list->entries, but entry will be freed, then list traversal may cause UAF.

Fix by removeing it from list->entries before free().

Fixes b2383c90a9d6 ("vme: tsi148: fix first DMA item mapping")
---
 drivers/vme/bridges/vme_tsi148.c | 1 +
 1 file changed, 1 insertion(+)
drivers/vme/bridges/vme_tsi148.c +1 -0
index fc1b634b969a..2058403f8806 100644
@@ -1778,6 +1778,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	return 0;
 
 err_dma:
+	list_del(&entry->list);
 err_dest:
 err_source:
 err_align:
Signature · 1 line
2.35.1
author maintainer
#166 lore raw

PATCH 164/338 serial: amba-pl011: avoid SBSA UART accessing DMACR register

In reply to Greg Kroah-Hartman

From: Jiamei Xie <[email protected]>

[ Upstream commit 94cdb9f33698478b0e7062586633c42c6158a786 ]

Chapter "B Generic UART" in "ARM Server Base System Architecture" [1] documentation describes a generic UART interface. Such generic UART does not support DMA. In current code, sbsa_uart_pops and amba_pl011_pops share the same stop_rx operation, which will invoke pl011_dma_rx_stop, leading to an access of the DMACR register. This commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the access to DMACR register for SBSA UARTs which does not support DMA.

When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13

Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
 pl011_stop_rx+0x70/0x80
 tty_port_shutdown+0x7c/0xb4
 tty_port_close+0x60/0xcc
 uart_close+0x34/0x8c
 tty_release+0x144/0x4c0
 __fput+0x78/0x220
 ____fput+0x1c/0x30
 task_work_run+0x88/0xc0
 do_notify_resume+0x8d0/0x123c
 el0_svc+0xa8/0xc0
 el0t_64_sync_handler+0xa4/0x130
 el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---

note: bootlogd[132] exited with preempt_count 1 /etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon

This has been discussed in the Xen community, and we think it should fix this in Linux. See [2] for more information.

[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html

Fixes 0dd1e247fd39 (drivers: PL011: add support for the ARM SBSA generic UART)
---
 drivers/tty/serial/amba-pl011.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/tty/serial/amba-pl011.c +3 -0
index a9aa8cd7f29c..10c7a0bc1698 100644
@@ -1066,6 +1066,9 @@ static void pl011_dma_rx_callback(void *data)
  */
 static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
 {
+	if (!uap->using_rx_dma)
+		return;
+
 	/* FIXME.  Just disable the DMA enable */
 	uap->dmacr &= ~UART011_RXDMAE;
 	pl011_write(uap->dmacr, uap, REG_DMACR);
Signature · 1 line
2.35.1
author maintainer
#167 lore raw

PATCH 165/338 serial: pch: Fix PCI device refcount leak in pch_request_dma()

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 8be3a7bf773700534a6e8f87f6ed2ed111254be5 ]

As comment of pci_get_slot() says, it returns a pci_device with its refcount increased. The caller must decrement the reference count by calling pci_dev_put().

Since 'dma_dev' is only used to filter the channel in filter(), we can call pci_dev_put() before exiting from pch_request_dma(). Add the missing pci_dev_put() for the normal and error path.

---
 drivers/tty/serial/pch_uart.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/tty/serial/pch_uart.c +4 -0
index 15ddcbd1f9d2..472cbd851188 100644
@@ -748,6 +748,7 @@ static void pch_request_dma(struct uart_port *port)
 	if (!chan) {
 		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
 			__func__);
+		pci_dev_put(dma_dev);
 		return;
 	}
 	priv->chan_tx = chan;
@@ -764,6 +765,7 @@ static void pch_request_dma(struct uart_port *port)
 			__func__);
 		dma_release_channel(priv->chan_tx);
 		priv->chan_tx = NULL;
+		pci_dev_put(dma_dev);
 		return;
 	}
 
@@ -771,6 +773,8 @@ static void pch_request_dma(struct uart_port *port)
 	priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
 				    &priv->rx_buf_dma, GFP_KERNEL);
 	priv->chan_rx = chan;
+
+	pci_dev_put(dma_dev);
 }
 
 static void pch_dma_rx_complete(void *arg)
Signature · 1 line
2.35.1
author maintainer
#168 lore raw

PATCH 166/338 serial: sunsab: Fix error handling in sunsab_init()

In reply to Greg Kroah-Hartman

From: Yuan Can <[email protected]>

[ Upstream commit 1a6ec673fb627c26e2267ca0a03849f91dbd9b40 ]

The sunsab_init() returns the platform_driver_register() directly without checking its return value, if platform_driver_register() failed, the allocated sunsab_ports is leaked.
Fix by free sunsab_ports and set it to NULL when platform_driver_register() failed.

Fixes c4d37215a824 ("[SERIAL] sunsab: Convert to of_driver framework.")
---
 drivers/tty/serial/sunsab.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/tty/serial/sunsab.c +7 -1
index 653a076d89d3..96ba6854a508 100644
@@ -1138,7 +1138,13 @@ static int __init sunsab_init(void)
 		}
 	}
 
-	return platform_driver_register(&sab_driver);
+	err = platform_driver_register(&sab_driver);
+	if (err) {
+		kfree(sunsab_ports);
+		sunsab_ports = NULL;
+	}
+
+	return err;
 }
 
 static void __exit sunsab_exit(void)
Signature · 1 line
2.35.1
author maintainer
#169 lore raw

PATCH 167/338 test_firmware: fix memory leak in test_firmware_init()

In reply to Greg Kroah-Hartman

From: Zhengchao Shao <[email protected]>

[ Upstream commit 7610615e8cdb3f6f5bbd9d8e7a5d8a63e3cabf2e ]

When misc_register() failed in test_firmware_init(), the memory pointed by test_fw_config->name is not released. The memory leak information is as follows:
unreferenced object 0xffff88810a34cb00 (size 32):
comm "insmod", pid 7952, jiffies 4294948236 (age 49.060s) hex dump (first 32 bytes):

    74 65 73 74 2d 66 69 72 6d 77 61 72 65 2e 62 69  test-firmware.bi
    6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  n...............
  backtrace:
    [<ffffffff81b21fcb>] __kmalloc_node_track_caller+0x4b/0xc0
    [<ffffffff81affb96>] kstrndup+0x46/0xc0
    [<ffffffffa0403a49>] __test_firmware_config_init+0x29/0x380 [test_firmware]
    [<ffffffffa040f068>] 0xffffffffa040f068
    [<ffffffff81002c41>] do_one_initcall+0x141/0x780
    [<ffffffff816a72c3>] do_init_module+0x1c3/0x630
    [<ffffffff816adb9e>] load_module+0x623e/0x76a0
    [<ffffffff816af471>] __do_sys_finit_module+0x181/0x240
    [<ffffffff89978f99>] do_syscall_64+0x39/0xb0
    [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
---
 lib/test_firmware.c | 1 +
 1 file changed, 1 insertion(+)
lib/test_firmware.c +1 -0
index 2e5e18bbfd28..1c5e5246bf10 100644
@@ -903,6 +903,7 @@ static int __init test_firmware_init(void)
 
 	rc = misc_register(&test_fw_misc_device);
 	if (rc) {
+		__test_firmware_config_free();
 		kfree(test_fw_config);
 		pr_err("could not register misc device: %d\n", rc);
 		return rc;
Signature · 1 line
2.35.1
author maintainer
#170 lore raw

PATCH 168/338 misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()

In reply to Greg Kroah-Hartman

From: ruanjinjie <[email protected]>

[ Upstream commit fd2c930cf6a5b9176382c15f9acb1996e76e25ad ]

If device_register() returns error in tifm_7xx1_switch_media(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked.

Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized.

Fixes 2428a8fe2261 ("tifm: move common device management tasks from tifm_7xx1 to tifm_core")
---
 drivers/misc/tifm_7xx1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/tifm_7xx1.c +1 -1
index e5f108713dd8..2afb96598f61 100644
@@ -194,7 +194,7 @@ static void tifm_7xx1_switch_media(struct work_struct *work)
 				spin_unlock_irqrestore(&fm->lock, flags);
 			}
 			if (sock)
-				tifm_free_device(&sock->dev);
+				put_device(&sock->dev);
 		}
 		spin_lock_irqsave(&fm->lock, flags);
 	}
Signature · 1 line
2.35.1
author maintainer
#171 lore raw

PATCH 169/338 misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os

In reply to Greg Kroah-Hartman

From: Zheng Wang <[email protected]>

[ Upstream commit 643a16a0eb1d6ac23744bb6e90a00fc21148a9dc ]

In some bad situation, the gts may be freed gru_check_chiplet_assignment. The call chain can be gru_unload_context->gru_free_gru_context->gts_drop and kfree finally. However, the caller didn't know if the gts is freed or not and use it afterwards. This will trigger a Use after Free bug.

Fix it by introducing a return value to see if it's in error path or not. Free the gts in caller if gru_check_chiplet_assignment check failed.

---
 drivers/misc/sgi-gru/grufault.c  | 13 +++++++++++--
 drivers/misc/sgi-gru/grumain.c   | 22 ++++++++++++++++++----
 drivers/misc/sgi-gru/grutables.h |  2 +-
 3 files changed, 30 insertions(+), 7 deletions(-)
drivers/misc/sgi-gru/grufault.c +11 -2
index 93be82fc338a..16df731e63c5 100644
@@ -661,6 +661,7 @@ int gru_handle_user_call_os(unsigned long cb)
 	if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB)
 		return -EINVAL;
 
+again:
 	gts = gru_find_lock_gts(cb);
 	if (!gts)
 		return -EINVAL;
@@ -669,7 +670,11 @@ int gru_handle_user_call_os(unsigned long cb)
 	if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE)
 		goto exit;
 
-	gru_check_context_placement(gts);
+	if (gru_check_context_placement(gts)) {
+		gru_unlock_gts(gts);
+		gru_unload_context(gts, 1);
+		goto again;
+	}
 
 	/*
 	 * CCH may contain stale data if ts_force_cch_reload is set.
@@ -887,7 +892,11 @@ int gru_set_context_option(unsigned long arg)
 		} else {
 			gts->ts_user_blade_id = req.val1;
 			gts->ts_user_chiplet_id = req.val0;
-			gru_check_context_placement(gts);
+			if (gru_check_context_placement(gts)) {
+				gru_unlock_gts(gts);
+				gru_unload_context(gts, 1);
+				return ret;
+			}
 		}
 		break;
 	case sco_gseg_owner:
drivers/misc/sgi-gru/grumain.c +18 -4
index 3641f1334cf0..7b0ad008def5 100644
@@ -729,9 +729,10 @@ static int gru_check_chiplet_assignment(struct gru_state *gru,
  * chiplet. Misassignment can occur if the process migrates to a different
  * blade or if the user changes the selected blade/chiplet.
  */
-void gru_check_context_placement(struct gru_thread_state *gts)
+int gru_check_context_placement(struct gru_thread_state *gts)
 {
 	struct gru_state *gru;
+	int ret = 0;
 
 	/*
 	 * If the current task is the context owner, verify that the
@@ -739,15 +740,23 @@ void gru_check_context_placement(struct gru_thread_state *gts)
 	 * references. Pthread apps use non-owner references to the CBRs.
 	 */
 	gru = gts->ts_gru;
+	/*
+	 * If gru or gts->ts_tgid_owner isn't initialized properly, return
+	 * success to indicate that the caller does not need to unload the
+	 * gru context.The caller is responsible for their inspection and
+	 * reinitialization if needed.
+	 */
 	if (!gru || gts->ts_tgid_owner != current->tgid)
-		return;
+		return ret;
 
 	if (!gru_check_chiplet_assignment(gru, gts)) {
 		STAT(check_context_unload);
-		gru_unload_context(gts, 1);
+		ret = -EINVAL;
 	} else if (gru_retarget_intr(gts)) {
 		STAT(check_context_retarget_intr);
 	}
+
+	return ret;
 }
 
 
@@ -947,7 +956,12 @@ int gru_fault(struct vm_fault *vmf)
 	mutex_lock(&gts->ts_ctxlock);
 	preempt_disable();
 
-	gru_check_context_placement(gts);
+	if (gru_check_context_placement(gts)) {
+		preempt_enable();
+		mutex_unlock(&gts->ts_ctxlock);
+		gru_unload_context(gts, 1);
+		return VM_FAULT_NOPAGE;
+	}
 
 	if (!gts->ts_gru) {
 		STAT(load_user_context);
drivers/misc/sgi-gru/grutables.h +1 -1
index b5e308b50ed1..01ece3cc2dd7 100644
@@ -651,7 +651,7 @@ extern int gru_user_flush_tlb(unsigned long arg);
 extern int gru_user_unload_context(unsigned long arg);
 extern int gru_get_exception_detail(unsigned long arg);
 extern int gru_set_context_option(unsigned long address);
-extern void gru_check_context_placement(struct gru_thread_state *gts);
+extern int gru_check_context_placement(struct gru_thread_state *gts);
 extern int gru_cpu_fault_map_id(void);
 extern struct vm_area_struct *gru_find_vma(unsigned long vaddr);
 extern void gru_flush_all_tlb(struct gru_state *gru);
Signature · 1 line
2.35.1
author maintainer
#172 lore raw

PATCH 170/338 cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 61c80d1c3833e196256fb060382db94f24d3d9a7 ]

If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device.

As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

---
 drivers/misc/cxl/guest.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)
drivers/misc/cxl/guest.c +14 -10
index de2ce5539545..47a52e73e9de 100644
@@ -971,10 +971,10 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
 	 * if it returns an error!
 	 */
 	if ((rc = cxl_register_afu(afu)))
-		goto err_put1;
+		goto err_put_dev;
 
 	if ((rc = cxl_sysfs_afu_add(afu)))
-		goto err_put1;
+		goto err_del_dev;
 
 	/*
 	 * pHyp doesn't expose the programming models supported by the
@@ -990,7 +990,7 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
 		afu->modes_supported = CXL_MODE_DIRECTED;
 
 	if ((rc = cxl_afu_select_best_mode(afu)))
-		goto err_put2;
+		goto err_remove_sysfs;
 
 	adapter->afu[afu->slice] = afu;
 
@@ -1010,10 +1010,12 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
 
 	return 0;
 
-err_put2:
+err_remove_sysfs:
 	cxl_sysfs_afu_remove(afu);
-err_put1:
-	device_unregister(&afu->dev);
+err_del_dev:
+	device_del(&afu->dev);
+err_put_dev:
+	put_device(&afu->dev);
 	free = false;
 	guest_release_serr_irq(afu);
 err2:
@@ -1147,18 +1149,20 @@ struct cxl *cxl_guest_init_adapter(struct device_node *np, struct platform_devic
 	 * even if it returns an error!
 	 */
 	if ((rc = cxl_register_adapter(adapter)))
-		goto err_put1;
+		goto err_put_dev;
 
 	if ((rc = cxl_sysfs_adapter_add(adapter)))
-		goto err_put1;
+		goto err_del_dev;
 
 	/* release the context lock as the adapter is configured */
 	cxl_adapter_context_unlock(adapter);
 
 	return adapter;
 
-err_put1:
-	device_unregister(&adapter->dev);
+err_del_dev:
+	device_del(&adapter->dev);
+err_put_dev:
+	put_device(&adapter->dev);
 	free = false;
 	cxl_guest_remove_chardev(adapter);
 err1:
Signature · 1 line
2.35.1
author maintainer
#173 lore raw

PATCH 171/338 cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 02cd3032b154fa02fdf90e7467abaeed889330b2 ]

If device_register() fails in cxl_pci_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device.

As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

Fixes f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
---
 drivers/misc/cxl/pci.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/misc/cxl/pci.c +12 -8
index cf069e11d2d2..d447a028966c 100644
@@ -1398,10 +1398,10 @@ static int pci_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
 	 * if it returns an error!
 	 */
 	if ((rc = cxl_register_afu(afu)))
-		goto err_put1;
+		goto err_put_dev;
 
 	if ((rc = cxl_sysfs_afu_add(afu)))
-		goto err_put1;
+		goto err_del_dev;
 
 	adapter->afu[afu->slice] = afu;
 
@@ -1410,10 +1410,12 @@ static int pci_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
 
 	return 0;
 
-err_put1:
+err_del_dev:
+	device_del(&afu->dev);
+err_put_dev:
 	pci_deconfigure_afu(afu);
 	cxl_debugfs_afu_remove(afu);
-	device_unregister(&afu->dev);
+	put_device(&afu->dev);
 	return rc;
 
 err_free_native:
@@ -1874,23 +1876,25 @@ static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev)
 	 * even if it returns an error!
 	 */
 	if ((rc = cxl_register_adapter(adapter)))
-		goto err_put1;
+		goto err_put_dev;
 
 	if ((rc = cxl_sysfs_adapter_add(adapter)))
-		goto err_put1;
+		goto err_del_dev;
 
 	/* Release the context lock as adapter is configured */
 	cxl_adapter_context_unlock(adapter);
 
 	return adapter;
 
-err_put1:
+err_del_dev:
+	device_del(&adapter->dev);
+err_put_dev:
 	/* This should mirror cxl_remove_adapter, except without the
 	 * sysfs parts
 	 */
 	cxl_debugfs_adapter_remove(adapter);
 	cxl_deconfigure_adapter(adapter);
-	device_unregister(&adapter->dev);
+	put_device(&adapter->dev);
 	return ERR_PTR(rc);
 
 err_release:
Signature · 1 line
2.35.1
author maintainer
#174 lore raw

PATCH 172/338 drivers: mcb: fix resource leak in mcb_probe()

In reply to Greg Kroah-Hartman

From: Zhengchao Shao <[email protected]>

[ Upstream commit d7237462561fcd224fa687c56ccb68629f50fc0d ]

When probe hook function failed in mcb_probe(), it doesn't put the device. Compiled test only.

---
 drivers/mcb/mcb-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mcb/mcb-core.c +3 -1
index 118d27ee31c2..7fd32b0183dc 100644
@@ -74,8 +74,10 @@ static int mcb_probe(struct device *dev)
 
 	get_device(dev);
 	ret = mdrv->probe(mdev, found_id);
-	if (ret)
+	if (ret) {
 		module_put(carrier_mod);
+		put_device(dev);
+	}
 
 	return ret;
 }
Signature · 1 line
2.35.1
author maintainer
#175 lore raw

PATCH 173/338 mcb: mcb-parse: fix error handing in chameleon_parse_gdd()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 728ac3389296caf68638628c987aeae6c8851e2d ]

If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount of bus and device name are leaked. Fix this by calling put_device() to give up the reference, so they can be released in mcb_release_dev() and kobject_cleanup().

---
 drivers/mcb/mcb-parse.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mcb/mcb-parse.c +1 -1
index 7369bda3442f..3636349648b4 100644
@@ -107,7 +107,7 @@ static int chameleon_parse_gdd(struct mcb_bus *bus,
 	return 0;
 
 err:
-	mcb_free_dev(mdev);
+	put_device(&mdev->dev);
 
 	return ret;
 }
Signature · 1 line
2.35.1
author maintainer
#176 lore raw

PATCH 174/338 chardev: fix error handling in cdev_device_add()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 11fa7fefe3d8fac7da56bc9aa3dd5fb3081ca797 ]

While doing fault injection test, I got the following report:

------------[ cut here ]------------
kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0
CPU: 3 PID: 6306 Comm: 283 Tainted: G        W          6.1.0-rc2-00005-g307c1086d7c9 #1253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kobject_put+0x23d/0x4e0
Call Trace:
 <TASK>
 cdev_device_add+0x15e/0x1b0
 __iio_device_register+0x13b4/0x1af0 [industrialio]
 __devm_iio_device_register+0x22/0x90 [industrialio]
 max517_probe+0x3d8/0x6b4 [max517]
 i2c_device_probe+0xa81/0xc00

When device_add() is injected fault and returns error, if dev->devt is not set, cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt in error path.

Fixes 233ed09d7fda ("chardev: add helper function to register char devs with a struct device")
---
 fs/char_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/char_dev.c +1 -1
index 715d76b00108..c7f79f048086 100644
@@ -553,7 +553,7 @@ int cdev_device_add(struct cdev *cdev, struct device *dev)
 	}
 
 	rc = device_add(dev);
-	if (rc)
+	if (rc && dev->devt)
 		cdev_del(cdev);
 
 	return rc;
Signature · 1 line
2.35.1
author maintainer
#177 lore raw

PATCH 175/338 i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe

In reply to Greg Kroah-Hartman

From: Hui Tang <[email protected]>

[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ]

Using pcim_enable_device() to avoid missing pci_disable_device().

Fixes 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller")
---
 drivers/i2c/busses/i2c-pxa-pci.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/i2c/busses/i2c-pxa-pci.c +3 -7
index 004deb96afe3..4e81fbdaf90f 100644
@@ -105,7 +105,7 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
 	int i;
 	struct ce4100_devices *sds;
 
-	ret = pci_enable_device_mem(dev);
+	ret = pcim_enable_device(dev);
 	if (ret)
 		return ret;
 
@@ -114,10 +114,8 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
 		return -EINVAL;
 	}
 	sds = kzalloc(sizeof(*sds), GFP_KERNEL);
-	if (!sds) {
-		ret = -ENOMEM;
-		goto err_mem;
-	}
+	if (!sds)
+		return -ENOMEM;
 
 	for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
 		sds->pdev[i] = add_i2c_device(dev, i);
@@ -133,8 +131,6 @@ static int ce4100_i2c_probe(struct pci_dev *dev,
 
 err_dev_add:
 	kfree(sds);
-err_mem:
-	pci_disable_device(dev);
 	return ret;
 }
 
Signature · 1 line
2.35.1
author maintainer
#178 lore raw

PATCH 176/338 staging: rtl8192u: Fix use after free in ieee80211_rx()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit bcc5e2dcf09089b337b76fc1a589f6ff95ca19ac ]

We cannot dereference the "skb" pointer after calling ieee80211_monitor_rx(), because it is a use after free.

Fixes 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
---
 drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c +3 -1
index cbf8eb4a049d..6c529f349379 100644
@@ -961,9 +961,11 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 #endif
 
 	if (ieee->iw_mode == IW_MODE_MONITOR) {
+		unsigned int len = skb->len;
+
 		ieee80211_monitor_rx(ieee, skb, rx_stats);
 		stats->rx_packets++;
-		stats->rx_bytes += skb->len;
+		stats->rx_bytes += len;
 		return 1;
 	}
 
Signature · 1 line
2.35.1
author maintainer
#179 lore raw

PATCH 177/338 staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

[ Upstream commit d30f4436f364b4ad915ca2c09be07cd0f93ceb44 ]

The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it, after calling this, dereferencing skb may trigger use-after-free. Found by Smatch.

Fixes 94a799425eee ("From: wlanfae <[email protected]> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
---
 drivers/staging/rtl8192e/rtllib_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8192e/rtllib_rx.c +1 -1
index 171009e82137..85a71b09fcba 100644
@@ -1501,9 +1501,9 @@ static int rtllib_rx_Monitor(struct rtllib_device *ieee, struct sk_buff *skb,
 		hdrlen += 4;
 	}
 
-	rtllib_monitor_rx(ieee, skb, rx_stats, hdrlen);
 	ieee->stats.rx_packets++;
 	ieee->stats.rx_bytes += skb->len;
+	rtllib_monitor_rx(ieee, skb, rx_stats, hdrlen);
 
 	return 1;
 }
Signature · 1 line
2.35.1
author maintainer
#180 lore raw

PATCH 178/338 vme: Fix error not catched in fake_init()

In reply to Greg Kroah-Hartman

From: Chen Zhongjin <[email protected]>

[ Upstream commit 7bef797d707f1744f71156b21d41e3b8c946631f ]

In fake_init(), __root_device_register() is possible to fail but it's ignored, which can cause unregistering vme_root fail when exit.

 general protection fault,
 probably for non-canonical address 0xdffffc000000008c
 KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
 RIP: 0010:root_device_unregister+0x26/0x60
 Call Trace:
  <TASK>
  __x64_sys_delete_module+0x34f/0x540
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Return error when __root_device_register() fails.

---
 drivers/vme/bridges/vme_fake.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/vme/bridges/vme_fake.c +2 -0
index e81ec763b555..150ee8b3507f 100644
@@ -1077,6 +1077,8 @@ static int __init fake_init(void)
 
 	/* We need a fake parent device */
 	vme_root = __root_device_register("vme", THIS_MODULE);
+	if (IS_ERR(vme_root))
+		return PTR_ERR(vme_root);
 
 	/* If we want to support more than one bridge at some point, we need to
 	 * dynamically allocate this so we get one per device.
Signature · 1 line
2.35.1
author maintainer
#181 lore raw

PATCH 179/338 i2c: ismt: Fix an out-of-bounds bug in ismt_access()

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ]

When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug.

The following log can reveal it:

[   33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20
[   33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA:  WRITE
[   33.996475] ==================================================================
[   33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b
[   33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485
[   33.999450] Call Trace:
[   34.001849]  memcpy+0x20/0x60
[   34.002077]  ismt_access.cold+0x374/0x214b
[   34.003382]  __i2c_smbus_xfer+0x44f/0xfb0
[   34.004007]  i2c_smbus_xfer+0x10a/0x390
[   34.004291]  i2cdev_ioctl_smbus+0x2c8/0x710
[   34.005196]  i2cdev_ioctl+0x5ec/0x74c

Fix this bug by checking the size of 'data->block[0]' first.

Fixes 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
---
 drivers/i2c/busses/i2c-ismt.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/i2c/busses/i2c-ismt.c +3 -0
index b51adffa4841..e689c7acea62 100644
@@ -495,6 +495,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		if (read_write == I2C_SMBUS_WRITE) {
 			/* Block Write */
 			dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA:  WRITE\n");
+			if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+				return -EINVAL;
+
 			dma_size = data->block[0] + 1;
 			dma_direction = DMA_TO_DEVICE;
 			desc->wr_len_cmd = dma_size;
Signature · 1 line
2.35.1
author maintainer
#182 lore raw

PATCH 180/338 usb: storage: Add check for kcalloc

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit c35ca10f53c51eeb610d3f8fbc6dd6d511b58a58 ]

As kcalloc may return NULL pointer, the return value should be checked and return error if fails as same as the ones in alauda_read_map.

---
 drivers/usb/storage/alauda.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/storage/alauda.c +2 -0
index 878b4b8761f5..3dbd60540372 100644
@@ -450,6 +450,8 @@ static int alauda_init_media(struct us_data *us)
 		+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
 	MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
 	MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+	if (MEDIA_INFO(us).pba_to_lba == NULL || MEDIA_INFO(us).lba_to_pba == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
 
 	if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
Signature · 1 line
2.35.1
author maintainer
#183 lore raw

PATCH 181/338 fbdev: ssd1307fb: Drop optional dependency

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 025e3b507a3a8e1ee96a3112bb67495c77d6cdb6 ]

Only a single out of three devices need a PWM, so from driver it's optional. Moreover it's a single driver in the entire kernel that currently selects PWM. Unfortunately this selection is a root cause of the circular dependencies when we want to enable optional PWM for some other drivers that select GPIOLIB.

Fixes a2ed00da5047 ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
---
 drivers/video/fbdev/Kconfig | 1 -
 1 file changed, 1 deletion(-)
drivers/video/fbdev/Kconfig +0 -1
index d00588d9b025..a7e8db955ef6 100644
@@ -2477,7 +2477,6 @@ config FB_SSD1307
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
 	select FB_DEFERRED_IO
-	select PWM
 	select FB_BACKLIGHT
 	help
 	  This driver implements support for the Solomon SSD1307
Signature · 1 line
2.35.1
author maintainer
#184 lore raw

PATCH 182/338 fbdev: pm2fb: fix missing pci_disable_device()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit ed359a464846b48f76ea6cc5cd8257e545ac97f4 ]

Add missing pci_disable_device() in error path of probe() and remove() path.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/video/fbdev/pm2fb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/video/fbdev/pm2fb.c +7 -2
index a5375b09415a..ea6e980bd946 100644
@@ -1527,8 +1527,10 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	info = framebuffer_alloc(sizeof(struct pm2fb_par), &pdev->dev);
-	if (!info)
-		return -ENOMEM;
+	if (!info) {
+		err = -ENOMEM;
+		goto err_exit_disable;
+	}
 	default_par = info->par;
 
 	switch (pdev->device) {
@@ -1709,6 +1711,8 @@ static int pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len);
  err_exit_neither:
 	framebuffer_release(info);
+ err_exit_disable:
+	pci_disable_device(pdev);
 	return retval;
 }
 
@@ -1735,6 +1739,7 @@ static void pm2fb_remove(struct pci_dev *pdev)
 	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
 	framebuffer_release(info);
+	pci_disable_device(pdev);
 }
 
 static const struct pci_device_id pm2fb_id_table[] = {
Signature · 1 line
2.35.1
author maintainer
#185 lore raw

PATCH 183/338 fbdev: via: Fix error in via_core_init()

In reply to Greg Kroah-Hartman

From: Shang XiaoJing <[email protected]>

[ Upstream commit 5886b130de953cfb8826f7771ec8640a79934a7f ]

via_core_init() won't exit the driver when pci_register_driver() failed. Exit the viafb-i2c and the viafb-gpio in failed path to prevent error.

VIA Graphics Integration Chipset framebuffer 2.4 initializing
Error: Driver 'viafb-i2c' is already registered, aborting...
Error: Driver 'viafb-gpio' is already registered, aborting...

Fixes 7582eb9be85f ("viafb: Turn GPIO and i2c into proper platform devices")
---
 drivers/video/fbdev/via/via-core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/video/fbdev/via/via-core.c +8 -1
index 77774d8abf94..e327ed308504 100644
@@ -775,7 +775,14 @@ static int __init via_core_init(void)
 		return ret;
 	viafb_i2c_init();
 	viafb_gpio_init();
-	return pci_register_driver(&via_driver);
+	ret = pci_register_driver(&via_driver);
+	if (ret) {
+		viafb_gpio_exit();
+		viafb_i2c_exit();
+		return ret;
+	}
+
+	return 0;
 }
 
 static void __exit via_core_exit(void)
Signature · 1 line
2.35.1