Skip to contentSkip to conversation

dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit

PATCH Applied Adam Ford 2 participants 3 messages Jan 17, 2023 – Jan 26, 2023

Subsystems (2)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v5 1/2 dt-bindings: arm: Add Beacon EmbeddedWorks i.MX8M Plus kit

Add DT compatible string for a Beacon EmbeddedWorks development kit based on the i.MX8M Plus from NXP.

Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 3ba354578e8f..67449bc30bc9 100644
@@ -932,6 +932,7 @@ properties:
       - description: i.MX8MP based Boards
         items:
           - enum:
+              - beacon,imx8mp-beacon-kit  # i.MX8MP Beacon Development Kit
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
               - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
               - polyhex,imx8mp-debix      # Polyhex Debix boards
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#1 lore raw

PATCH v5 2/2 arm64: dts: imx: Introduce imx8mp-beacon-kit

Beacon Embedded has an i.MX8M Plus development kit which consists of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC, and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet PHY.

---
V5: Rebase, Fix whitespace, migrate away from deprecated bindings,
remove redundant PCIe clock settings, re-order TPM, add ethernet PHY ID.

V4: Change names of hd3ss3220 and ptn5100 to usb-typec,
change gpio-i2c2 to gpio, and connector-1 to connector

V3: Fix missing Makefile change, fix led names

V2: Fix whitespace, remove dead nodes, and fix some node and parameter names to address errors in 'make dt_binding_check'

arch/arm64/boot/dts/freescale/Makefile +1 -0
index e0f6a7970f58..d44c3c1d8c33 100644
@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts new file +550 -0

550 lines not on this page · raw message

arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi new file +416 -0

416 lines not on this page · raw message

Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Applied
#2 lore raw

Re: [PATCH V5 2/2] arm64: dts: imx: Introduce imx8mp-beacon-kit

Quoted 7 lines · Adam Ford

Beacon Embedded has an i.MX8M Plus development kit which consists of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC, and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet PHY.

Changed subject prefix to 'arm64: dts: freescale: ...'

Applied both, thanks!