Skip to contentSkip to conversation

hwmon: (pmbus/tda38640) Add driver for Infineon TDA38640 Voltage Regulator

PATCH In review Naresh Solanki 2 participants 6 messages Jan 24, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon: (pmbus/tda38640) Add driver for Infineon TDA38640 Voltage Regulator

From: Patrick Rudolph <[email protected]>

Add the pmbus driver for the Infineon TDA38640 voltage regulator.

---
 .../devicetree/bindings/trivial-devices.yaml  |  2 +
 drivers/hwmon/pmbus/Kconfig                   | 16 ++++
 drivers/hwmon/pmbus/Makefile                  |  1 +
 drivers/hwmon/pmbus/tda38640.c                | 78 +++++++++++++++++++
 4 files changed, 97 insertions(+)
 create mode 100644 drivers/hwmon/pmbus/tda38640.c
Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
index f5c0a6283e61..a28b02036489 100644
@@ -141,6 +141,8 @@ properties:
           - infineon,slb9645tt
             # Infineon SLB9673 I2C TPM 2.0
           - infineon,slb9673
+            # Infineon TDA38640 Voltage Regulator
+          - infineon,tda38640
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
             # Infineon Multi-phase Digital VR Controller xdpe11280
drivers/hwmon/pmbus/Kconfig +16 -0
index 30448e049486..9f4bbb9c487a 100644
@@ -395,6 +395,22 @@ config SENSORS_STPDDC60
 	  This driver can also be built as a module. If so, the module will
 	  be called stpddc60.
 
+config SENSORS_TDA38640
+	tristate "Infineon TDA38640"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  TDA38640.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tda38640.
+
+config SENSORS_TDA38640_REGULATOR
+	bool "Regulator support for TDA38640 and compatibles"
+	depends on SENSORS_TDA38640 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Infineon
+	  TDA38640 as regulator.
+
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
 	help
drivers/hwmon/pmbus/Makefile +1 -0
index d9d2fa4bd6f7..3ae019916267 100644
@@ -40,6 +40,7 @@ obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
 obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
 obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
+obj-$(CONFIG_SENSORS_TDA38640)	+= tda38640.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
 obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o
drivers/hwmon/pmbus/tda38640.c new file +78 -0

78 lines not on this page · raw message

base-commit: 4d891f76a30d3be4194a805c5e4277786140ef05

Signature · 1 line
2.38.1
#1 lore raw
Quoted 8 lines · Naresh Solanki

From: Patrick Rudolph <[email protected]>

Add the pmbus driver for the Infineon TDA38640 voltage regulator.

---
 .../devicetree/bindings/trivial-devices.yaml  |  2 +

Split bindings from driver code.

Quoted 32 lines
 drivers/hwmon/pmbus/Kconfig                   | 16 ++++
 drivers/hwmon/pmbus/Makefile                  |  1 +
 drivers/hwmon/pmbus/tda38640.c                | 78 +++++++++++++++++++
 4 files changed, 97 insertions(+)
 create mode 100644 drivers/hwmon/pmbus/tda38640.c
Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
index f5c0a6283e61..a28b02036489 100644
@@ -141,6 +141,8 @@ properties:
           - infineon,slb9645tt
             # Infineon SLB9673 I2C TPM 2.0
           - infineon,slb9673
+            # Infineon TDA38640 Voltage Regulator
+          - infineon,tda38640
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
             # Infineon Multi-phase Digital VR Controller xdpe11280
drivers/hwmon/pmbus/Kconfig +5 -0
index 30448e049486..9f4bbb9c487a 100644
@@ -395,6 +395,22 @@ config SENSORS_STPDDC60
 	  This driver can also be built as a module. If so, the module will
 	  be called stpddc60.
 
+config SENSORS_TDA38640
+	tristate "Infineon TDA38640"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  TDA38640.

drivers/hwmon/pmbus/Kconfig config SENSORS_STPDDC60 · line 412

Quoted 10 lines
drivers/hwmon/pmbus/Kconfig +10 -0
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tda38640.
+
+config SENSORS_TDA38640_REGULATOR
+	bool "Regulator support for TDA38640 and compatibles"
+	depends on SENSORS_TDA38640 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Infineon
+	  TDA38640 as regulator.

Drop entire option, why is it needed?

Quoted 65 lines
drivers/hwmon/pmbus/Kconfig +1 -0
+
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
 	help
drivers/hwmon/pmbus/Makefile +1 -0
index d9d2fa4bd6f7..3ae019916267 100644
@@ -40,6 +40,7 @@ obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
 obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
 obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
+obj-$(CONFIG_SENSORS_TDA38640)	+= tda38640.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
 obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o
drivers/hwmon/pmbus/tda38640.c new file +43 -0
new file mode 100644
index 000000000000..31e17a936b8c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon TDA38640
+ *
+ * Copyright (c) 2023 9elements GmbH
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/driver.h>
+#include "pmbus.h"
+
+#if IS_ENABLED(CONFIG_SENSORS_TDA38640_REGULATOR)
+static const struct regulator_desc tda38640_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+};
+#endif /* CONFIG_SENSORS_TDA38640_REGULATOR */
+
+static struct pmbus_driver_info tda38640_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_IIN
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+	    | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN,
+#if IS_ENABLED(CONFIG_SENSORS_TDA38640_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = tda38640_reg_desc,
+#endif
+};
+

drivers/hwmon/pmbus/tda38640.c line 53

Quoted 10 lines
drivers/hwmon/pmbus/tda38640.c new file +10 -0
+static int tda38640_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &tda38640_info);
+}
+
+static const struct i2c_device_id tda38640_id[] = {
+	{"tda38640", 0},
+	{}
+};
+

Drop blank line

drivers/hwmon/pmbus/tda38640.c line 56

Quoted 3 lines
drivers/hwmon/pmbus/tda38640.c new file +3 -0
+MODULE_DEVICE_TABLE(i2c, tda38640_id);
+
+#ifdef CONFIG_OF

Drop ifdefs and use __maybe_unused

drivers/hwmon/pmbus/tda38640.c line 61

Quoted 5 lines
drivers/hwmon/pmbus/tda38640.c new file +5 -0
+static const struct of_device_id tda38640_of_match[] = {
+	{ .compatible = "infineon,tda38640"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tda38640_of_match);

Where is it used? You miss the user.

drivers/hwmon/pmbus/tda38640.c line 71

Quoted 10 lines
drivers/hwmon/pmbus/tda38640.c new file +10 -0
+#endif
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tda38640_driver = {
+	.driver = {
+		   .name = "tda38640",
+		   },
+	.probe_new = tda38640_probe,
+	.id_table = tda38640_id,
+};

Best regards,
Krzysztof

#2 lore raw

Hi

Quoted 11 lines · Krzysztof Kozlowski
Quoted 8 lines · Naresh Solanki

From: Patrick Rudolph <[email protected]>

Add the pmbus driver for the Infineon TDA38640 voltage regulator.

---
  .../devicetree/bindings/trivial-devices.yaml  |  2 +

Split bindings from driver code.

Sure

Quoted 37 lines
Quoted 37 lines
  drivers/hwmon/pmbus/Kconfig                   | 16 ++++
  drivers/hwmon/pmbus/Makefile                  |  1 +
  drivers/hwmon/pmbus/tda38640.c                | 78 +++++++++++++++++++
  4 files changed, 97 insertions(+)

create mode 100644 drivers/hwmon/pmbus/tda38640.c

Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
index f5c0a6283e61..a28b02036489 100644
@@ -141,6 +141,8 @@ properties:
            - infineon,slb9645tt
              # Infineon SLB9673 I2C TPM 2.0
            - infineon,slb9673
+            # Infineon TDA38640 Voltage Regulator
+          - infineon,tda38640
              # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
            - infineon,tlv493d-a1b6
              # Infineon Multi-phase Digital VR Controller xdpe11280
drivers/hwmon/pmbus/Kconfig +9 -0
index 30448e049486..9f4bbb9c487a 100644
@@ -395,6 +395,22 @@ config SENSORS_STPDDC60
  	  This driver can also be built as a module. If so, the module will
  	  be called stpddc60.
 
+config SENSORS_TDA38640
+	tristate "Infineon TDA38640"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  TDA38640.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tda38640.
+
Quoted 8 lines

drivers/hwmon/pmbus/Kconfig config SENSORS_STPDDC60 · line 412

Quoted 6 lines
drivers/hwmon/pmbus/Kconfig +6 -0
+config SENSORS_TDA38640_REGULATOR
+	bool "Regulator support for TDA38640 and compatibles"
+	depends on SENSORS_TDA38640 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Infineon
+	  TDA38640 as regulator.

Drop entire option, why is it needed?

You mean regulator option ?
This is how other pmbus regulator devices have provided option.

Quoted 70 lines
Quoted 70 lines
drivers/hwmon/pmbus/Kconfig +1 -0
+
  config SENSORS_TPS40422
  	tristate "TI TPS40422"
  	help
drivers/hwmon/pmbus/Makefile +1 -0
index d9d2fa4bd6f7..3ae019916267 100644
@@ -40,6 +40,7 @@ obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
  obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
  obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
  obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
+obj-$(CONFIG_SENSORS_TDA38640)	+= tda38640.o
  obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
  obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
  obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o
drivers/hwmon/pmbus/tda38640.c new file +47 -0
new file mode 100644
index 000000000000..31e17a936b8c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon TDA38640
+ *
+ * Copyright (c) 2023 9elements GmbH
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/driver.h>
+#include "pmbus.h"
+
+#if IS_ENABLED(CONFIG_SENSORS_TDA38640_REGULATOR)
+static const struct regulator_desc tda38640_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+};
+#endif /* CONFIG_SENSORS_TDA38640_REGULATOR */
+
+static struct pmbus_driver_info tda38640_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_IIN
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+	    | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN,
+#if IS_ENABLED(CONFIG_SENSORS_TDA38640_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = tda38640_reg_desc,
+#endif
+};
+
+static int tda38640_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &tda38640_info);
+}
Quoted 8 lines

drivers/hwmon/pmbus/tda38640.c line 53

Quoted 6 lines
drivers/hwmon/pmbus/tda38640.c new file +6 -0
+
+static const struct i2c_device_id tda38640_id[] = {
+	{"tda38640", 0},
+	{}
+};
+

Drop blank line

Sure

Quoted 7 lines

drivers/hwmon/pmbus/tda38640.c line 56

Quoted 4 lines
drivers/hwmon/pmbus/tda38640.c new file +3 -0
+MODULE_DEVICE_TABLE(i2c, tda38640_id);
+
+#ifdef CONFIG_OF

Drop ifdefs and use __maybe_unused

Quoted 7 lines

drivers/hwmon/pmbus/tda38640.c line 61

Quoted 5 lines
drivers/hwmon/pmbus/tda38640.c new file +5 -0
+static const struct of_device_id tda38640_of_match[] = {
+	{ .compatible = "infineon,tda38640"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tda38640_of_match);

Where is it used? You miss the user.

I'm not sure if I get your question right. This chip is used in sbp1 board to power CPU rails.

Quoted 15 lines

drivers/hwmon/pmbus/tda38640.c line 71

Quoted 11 lines
drivers/hwmon/pmbus/tda38640.c new file +10 -0
+#endif
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tda38640_driver = {
+	.driver = {
+		   .name = "tda38640",
+		   },
+	.probe_new = tda38640_probe,
+	.id_table = tda38640_id,
+};

Best regards,
Krzysztof

Best regards,
Naresh

#3 lore raw
Quoted 60 lines · Naresh Solanki

Hi

Quoted 11 lines · Krzysztof Kozlowski
Quoted 8 lines · Naresh Solanki

From: Patrick Rudolph <[email protected]>

Add the pmbus driver for the Infineon TDA38640 voltage regulator.

---
  .../devicetree/bindings/trivial-devices.yaml  |  2 +

Split bindings from driver code.

Sure

Quoted 37 lines
Quoted 37 lines
  drivers/hwmon/pmbus/Kconfig                   | 16 ++++
  drivers/hwmon/pmbus/Makefile                  |  1 +
  drivers/hwmon/pmbus/tda38640.c                | 78 +++++++++++++++++++
  4 files changed, 97 insertions(+)

create mode 100644 drivers/hwmon/pmbus/tda38640.c

Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
index f5c0a6283e61..a28b02036489 100644
@@ -141,6 +141,8 @@ properties:
            - infineon,slb9645tt
              # Infineon SLB9673 I2C TPM 2.0
            - infineon,slb9673
+            # Infineon TDA38640 Voltage Regulator
+          - infineon,tda38640
              # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
            - infineon,tlv493d-a1b6
              # Infineon Multi-phase Digital VR Controller xdpe11280
drivers/hwmon/pmbus/Kconfig +9 -0
index 30448e049486..9f4bbb9c487a 100644
@@ -395,6 +395,22 @@ config SENSORS_STPDDC60
  	  This driver can also be built as a module. If so, the module will
  	  be called stpddc60.
 
+config SENSORS_TDA38640
+	tristate "Infineon TDA38640"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  TDA38640.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tda38640.
+
Quoted 8 lines

drivers/hwmon/pmbus/Kconfig config SENSORS_STPDDC60 · line 412

Quoted 6 lines
drivers/hwmon/pmbus/Kconfig +6 -0
+config SENSORS_TDA38640_REGULATOR
+	bool "Regulator support for TDA38640 and compatibles"
+	depends on SENSORS_TDA38640 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Infineon
+	  TDA38640 as regulator.

Drop entire option, why is it needed?

Quoted 2 lines

You mean regulator option ?
This is how other pmbus regulator devices have provided option.

Hmmm... I wonder why this is of any use.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/hwmon/pmbus/Kconfig +1 -0
+
  config SENSORS_TPS40422
  	tristate "TI TPS40422"
  	help

(...)

Quoted 10 lines
Quoted 8 lines

drivers/hwmon/pmbus/Kconfig

Quoted 6 lines
drivers/hwmon/pmbus/Kconfig +5 -0
+static const struct of_device_id tda38640_of_match[] = {
+	{ .compatible = "infineon,tda38640"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tda38640_of_match);

Where is it used? You miss the user.

I'm not sure if I get your question right. This chip is used in sbp1 board to power CPU rails.

No, where is the data structure used (except module autoloading)?

Best regards,
Krzysztof

#4 lore raw

Hi

Quoted 61 lines · Krzysztof Kozlowski
Quoted 60 lines · Naresh Solanki

Hi

Quoted 11 lines · Krzysztof Kozlowski
Quoted 8 lines · Naresh Solanki

From: Patrick Rudolph <[email protected]>

Add the pmbus driver for the Infineon TDA38640 voltage regulator.

---
   .../devicetree/bindings/trivial-devices.yaml  |  2 +

Split bindings from driver code.

Sure

Quoted 45 lines
Quoted 33 lines
   drivers/hwmon/pmbus/Kconfig                   | 16 ++++
   drivers/hwmon/pmbus/Makefile                  |  1 +
   drivers/hwmon/pmbus/tda38640.c                | 78 +++++++++++++++++++
   4 files changed, 97 insertions(+)

create mode 100644 drivers/hwmon/pmbus/tda38640.c

Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
index f5c0a6283e61..a28b02036489 100644
@@ -141,6 +141,8 @@ properties:
             - infineon,slb9645tt
               # Infineon SLB9673 I2C TPM 2.0
             - infineon,slb9673
+            # Infineon TDA38640 Voltage Regulator
+          - infineon,tda38640
               # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
             - infineon,tlv493d-a1b6
               # Infineon Multi-phase Digital VR Controller xdpe11280
drivers/hwmon/pmbus/Kconfig +5 -0
index 30448e049486..9f4bbb9c487a 100644
@@ -395,6 +395,22 @@ config SENSORS_STPDDC60
   	  This driver can also be built as a module. If so, the module will
   	  be called stpddc60.
 
+config SENSORS_TDA38640
+	tristate "Infineon TDA38640"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  TDA38640.

drivers/hwmon/pmbus/Kconfig config SENSORS_STPDDC60 · line 412

Quoted 10 lines
drivers/hwmon/pmbus/Kconfig +10 -0
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tda38640.
+
+config SENSORS_TDA38640_REGULATOR
+	bool "Regulator support for TDA38640 and compatibles"
+	depends on SENSORS_TDA38640 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Infineon
+	  TDA38640 as regulator.

Drop entire option, why is it needed?

Quoted 4 lines
Quoted 2 lines

You mean regulator option ?
This is how other pmbus regulator devices have provided option.

Hmmm... I wonder why this is of any use.

From what I can think of. Chip also provide pin to control regulator enable. If that is used in the design then the regulator option may not be needed.

Quoted 8 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
drivers/hwmon/pmbus/Kconfig +1 -0
+
   config SENSORS_TPS40422
   	tristate "TI TPS40422"
   	help

(...)

Yes this doesn't has regulator support in driver.

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

drivers/hwmon/pmbus/Kconfig

Quoted 7 lines
drivers/hwmon/pmbus/Kconfig +5 -0
+static const struct of_device_id tda38640_of_match[] = {
+	{ .compatible = "infineon,tda38640"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tda38640_of_match);

Where is it used? You miss the user.

Quoted 4 lines
Quoted 2 lines

I'm not sure if I get your question right. This chip is used in sbp1 board to power CPU rails.

No, where is the data structure used (except module autoloading)?

My use case is loading the driver base on DT. Not sure of other uses.

Quoted 4 lines

Best regards,
Krzysztof

Best Regards,
Naresh

#5 lore raw
Quoted 8 lines · Naresh Solanki
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

drivers/hwmon/pmbus/tda38640.c line 61

Quoted 6 lines
drivers/hwmon/pmbus/tda38640.c new file +5 -0
+static const struct of_device_id tda38640_of_match[] = {
+	{ .compatible = "infineon,tda38640"},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tda38640_of_match);

Where is it used? You miss the user.

Quoted 5 lines
Quoted 4 lines
Quoted 2 lines

I'm not sure if I get your question right. This chip is used in sbp1 board to power CPU rails.

No, where is the data structure used (except module autoloading)?

My use case is loading the driver base on DT. Not sure of other uses.

Where is it used in the code?

Best regards,
Krzysztof