Validate max source size
cover Validate max source size
i915 specific test is added to validate max source size.
Swati Sharma (3):
tests/kms_plane_scaling: Prep work tests/kms_plane_scaling: Remove extra newline tests/kms_plane_scaling: Add test to validate max source size
tests/kms_plane_scaling.c | 113 +++++++++++++++++++++++++++++++++++--- 1 file changed, 104 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/3 tests/kms_plane_scaling: Prep work
struct can be reused to add more test cases.
--- tests/kms_plane_scaling.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
tests/kms_plane_scaling.c +10 -8
@@ -42,6 +42,15 @@ typedef struct {bool extended; } data_t; +struct invalid_paramtests { +const char *testname; +uint32_t planesize[2 ]; +struct { +enum igt_atomic_plane_properties prop; +uint32_t value; + } params[8 ]; +}; + const struct { const char * const describe; const char * const name;
@@ -827,14 +836,7 @@ static void invalid_parameter_tests(data_t *d)igt_plane_t *plane;int rval; -const struct { -const char *testname; -uint32_t planesize[2 ]; -struct { -enum igt_atomic_plane_properties prop; -uint32_t value; - } params[8 ]; - } paramtests[] = { +static const struct invalid_paramtests paramtests[2 ] = { { .testname ="less-than-1-height-src" , .planesize = {256 ,8 },
Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t 1/3] tests/kms_plane_scaling: Prep work
Quoted 30 lines · Swati Sharma
struct can be reused to add more test cases.
Signed-off-by Swati Sharma <[email protected]>--- tests/kms_plane_scaling.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)tests/kms_plane_scaling.c +9
-0@@ -42,6 +42,15 @@ typedef struct {bool extended; } data_t; +struct invalid_paramtests { +const char *testname; +uint32_t planesize[2 ]; +struct { +enum igt_atomic_plane_properties prop; +uint32_t value; + } params[8 ]; +}; + const struct { const char * const describe; const char * const name;@@ -827,14 +836,7 @@ static void invalid_parameter_tests(data_t *d)igt_plane_t *plane;int rval;
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 839
Quoted 10 lines
tests/kms_plane_scaling.c +1
-8-const struct { -const char *testname; -uint32_t planesize[2 ]; -struct { -enum igt_atomic_plane_properties prop; -uint32_t value; - } params[8 ]; - } paramtests[] = { +static const struct invalid_paramtests paramtests[2 ] = {
"static const struct invalid_paramtests paramtests[]" would be better here, ie. not declaring here how long is the list of tests
Quoted 3 lines
tests/kms_plane_scaling.c +0
-0{ .testname = "less-than-1-height-src", .planesize = {256, 8},
Re: [igt-dev] [PATCH i-g-t 1/3] tests/kms_plane_scaling: Prep work
Quoted 33 lines · Juha-Pekka Heikkila
Quoted 32 lines · Swati Sharma
struct can be reused to add more test cases.
Signed-off-by Swati Sharma <[email protected]>---
tests/kms_plane_scaling.c| 18 ++++++++++--------1 file changed, 10 insertions(+), 8 deletions(-)tests/kms_plane_scaling.c +9
-3@@ -42,6 +42,15 @@ typedef struct { bool extended; } data_t; +struct invalid_paramtests { + const char *testname; + uint32_t planesize[2]; + struct { + enum igt_atomic_plane_properties prop; + uint32_t value; + } params[8]; +}; + const struct { const char * const describe; const char * const name;@@ -827,14 +836,7 @@ static void invalid_parameter_tests(data_t *d) igt_plane_t *plane; int rval; - const struct { - const char *testname; - uint32_t planesize[2];
Quoted 8 lines
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 839
Quoted 6 lines
tests/kms_plane_scaling.c +1
-5- struct { - enum igt_atomic_plane_properties prop; - uint32_t value; - } params[8]; - } paramtests[] = { + static const struct invalid_paramtests paramtests[2] = {"static const struct
invalid_paramtestsparamtests[]" would be better here, ie. not declaring here how long is the list of tests
Done. Added new series with the fixes https://patchwork.freedesktop.org/series/114059/
Quoted 5 lines
Quoted 4 lines
tests/kms_plane_scaling.c +0
-0{ .testname = "less-than-1-height-src", .planesize = {256, 8},
Signature · 1 line
~Swati Sharma
PATCH 2/3 tests/kms_plane_scaling: Remove extra newline
In reply to Swati SharmaRemove extra newline.
--- tests/kms_plane_scaling.c | 1 - 1 file changed, 1 deletion(-)
tests/kms_plane_scaling.c +0 -1
@@ -872,7 +872,6 @@ static void invalid_parameter_tests(data_t *d) paramtests[i].planesize[0 ], paramtests[i].planesize[1]); -for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) igt_plane_set_prop_value(plane, paramtests[i].params[j].prop,
Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t 2/3] tests/kms_plane_scaling: Remove extra newline
Quoted 12 lines · Swati Sharma
Remove extra newline.
Signed-off-by Swati Sharma <[email protected]>--- tests/kms_plane_scaling.c | 1 - 1 file changed, 1 deletion(-)tests/kms_plane_scaling.c +0
-0
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 877
Quoted 7 lines
tests/kms_plane_scaling.c +0
-1@@ -872,7 +872,6 @@ static void invalid_parameter_tests(data_t *d) paramtests[i].planesize[0 ], paramtests[i].planesize[1]); -for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) igt_plane_set_prop_value(plane, paramtests[i].params[j].prop,
While doing these fixes you could also fix that indentation on this igt_plane_set_prop_value(..) with those following lines having parameters.
Re: [igt-dev] [PATCH i-g-t 2/3] tests/kms_plane_scaling: Remove extra newline
Quoted 8 lines · Juha-Pekka Heikkila
Quoted 7 lines · Swati Sharma
Remove extra newline.
Signed-off-by Swati Sharma <[email protected]>---
tests/kms_plane_scaling.c| 1 -1 file changed, 1 deletion(-)
Quoted 13 lines
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 876
Quoted 11 lines
tests/kms_plane_scaling.c +0
-1@@ -872,7 +872,6 @@ static void invalid_parameter_tests(data_t *d) paramtests[i].planesize[0], paramtests[i].planesize[1]); - for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++) igt_plane_set_prop_value(plane, paramtests[i].params[j].prop,While doing these fixes you could also fix that indentation on this
igt_plane_set_prop_value(..)with those following lines having parameters.
Done. Sent the new series with fixes https://patchwork.freedesktop.org/series/114059/
Quoted 1 line
Signature · 1 line
~Swati Sharma
PATCH 3/3 tests/kms_plane_scaling: Add test to validate max source size
In reply to Swati Sharmai915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).
On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width supported is 5120.
--- tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +94 -0
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d) } } +/* +* Max source/destination width/height +* for i915 driver. +* +* DISPLAY_VER < 11 +* max_src_w = 4096 +* max_src_h = 4096 +* max_dst_w = 4096 +* max_dst_h = 4096 +* +* DISPLAY_VER = 11 +* max_src_w = 5120 +* max_src_h = 4096 +* max_dst_w = 5120 +* max_dst_h = 4096 +* +* DISPLAY_VER = 12-13 +* max_src_w = 5120 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +* +* DISPLAY_VER = 14 +* max_src_w = 4096 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +*/ + +static void i915_max_source_size_test (data_t *d) +{ +enum pipe pipe =PIPE_A ; +igt_output_t *output; +igt_fb_t fb; +igt_plane_t *plane; +int rval; + +static const struct invalid_paramtests paramtests[1 ] = { + { + .testname ="max-src-size" , + .planesize = {3840 ,2400 }, + .params = {{~0 }} + }, + }; + + igt_fixture { + output =igt_get_single_output_for_pipe (&d->display, pipe); +igt_require (output); + +igt_output_set_pipe (output, pipe); + plane =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + +igt_create_fb (d->drm_fd,5120 ,4320 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_NONE , + &fb); + } + +igt_describe ("test for validating max source size." ); + igt_subtest_with_dynamic("i915-max-source-size") { +for (uint32_t i =0 ; i <ARRAY_SIZE (paramtests); i++) { + igt_dynamic(paramtests[i].testname) { +igt_plane_set_position (plane,0 ,0 ); +igt_plane_set_fb (plane, &fb); +igt_plane_set_size (plane, + paramtests[i].planesize[0 ], + paramtests[i].planesize[1 ]); + +for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) +igt_plane_set_prop_value (plane, + paramtests[i].params[j].prop, + paramtests[i].params[j].value); + + rval =igt_display_try_commit2 (&d->display,COMMIT_ATOMIC ); + +if (intel_display_ver (d->devid) <11 ||intel_display_ver (d->devid) >=14 ) +igt_assert (rval == -EINVAL || rval == -ERANGE ); +else +igt_assert_eq (rval,0 ); + } + } + } + + igt_fixture { +igt_remove_fb (d->drm_fd, &fb); +igt_output_set_pipe (output,PIPE_NONE ); + } +} +static int opt_handler (int opt,int opt_index,void *_data) {data_t *data = _data;
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)invalid_parameter_tests (&data); + igt_fixture + igt_require_f(data.devid, "This test is valid only for i915 devices.\n"); + +i915_max_source_size_test (&data); + igt_fixture {igt_display_fini (&data.display);close (data.drm_fd);
Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size
Quoted 43 lines · Swati Sharma
i915 specific test is added to validate max source size. This test is expected to return
-EINVALfor platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).On
MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]]scaler_userindex 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass onADLP(display_ver=13)since max source width supported is 5120.Signed-off-by Swati Sharma <[email protected]>--- tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)tests/kms_plane_scaling.c +17
-0@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d) } } +/* +* Max source/destination width/height +* for i915 driver. +* +* DISPLAY_VER < 11 +* max_src_w = 4096 +* max_src_h = 4096 +* max_dst_w = 4096 +* max_dst_h = 4096 +* +* DISPLAY_VER = 11 +* max_src_w = 5120 +* max_src_h = 4096 +* max_dst_w = 5120 +* max_dst_h = 4096 +* +* DISPLAY_VER = 12-13
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 919
Quoted 10 lines
tests/kms_plane_scaling.c +10
-0+* max_src_w = 5120 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +* +* DISPLAY_VER = 14 +* max_src_w = 4096 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192
I think here could be added comment these numbers are coming from drivers/gpu/drm/i915/display/skl_scaler.c in kernel sources
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 930
Quoted 11 lines
tests/kms_plane_scaling.c +11
-0+*/ + +static void i915_max_source_size_test (data_t *d) +{ +enum pipe pipe =PIPE_A ; +igt_output_t *output; +igt_fb_t fb; +igt_plane_t *plane; +int rval; + +static const struct invalid_paramtests paramtests[1 ] = {
"static const struct invalid_paramtests paramtests[]" would be better here, ie. not declaring here how long is the list of tests
Quoted 8 lines
tests/kms_plane_scaling.c +8
-0+ { + .testname = "max-src-size", + .planesize = {3840, 2400}, + .params = {{~0}} + }, + }; + + igt_fixture {
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 948
Quoted 10 lines
tests/kms_plane_scaling.c +10
-0+ output =igt_get_single_output_for_pipe (&d->display, pipe); +igt_require (output); + +igt_output_set_pipe (output, pipe); + plane =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + +igt_create_fb (d->drm_fd,5120 ,4320 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_NONE , + &fb);
above indentation is off on those lines with parameters.
Quoted 37 lines
tests/kms_plane_scaling.c +33
-0+ } + +igt_describe ("test for validating max source size." ); + igt_subtest_with_dynamic("i915-max-source-size") { +for (uint32_t i =0 ; i <ARRAY_SIZE (paramtests); i++) { + igt_dynamic(paramtests[i].testname) { +igt_plane_set_position (plane,0 ,0 ); +igt_plane_set_fb (plane, &fb); +igt_plane_set_size (plane, + paramtests[i].planesize[0 ], + paramtests[i].planesize[1 ]); + +for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) +igt_plane_set_prop_value (plane, + paramtests[i].params[j].prop, + paramtests[i].params[j].value); + + rval =igt_display_try_commit2 (&d->display,COMMIT_ATOMIC ); + +if (intel_display_ver (d->devid) <11 ||intel_display_ver (d->devid) >=14 ) +igt_assert (rval == -EINVAL || rval == -ERANGE ); +else +igt_assert_eq (rval,0 ); + } + } + } + + igt_fixture { +igt_remove_fb (d->drm_fd, &fb); +igt_output_set_pipe (output,PIPE_NONE ); + } +} +static int opt_handler (int opt,int opt_index,void *_data) {data_t *data = _data;
tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1151
Quoted 8 lines
tests/kms_plane_scaling.c +5
-0@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)invalid_parameter_tests (&data); + igt_fixture + igt_require_f(data.devid, "This test is valid only for i915 devices.\n"); + +i915_max_source_size_test (&data); +
These above changes I think could be wrapped inside igt_subtest_group so that i915 requirement doesn't become inherited if someone come add something here after this test.
Quoted 3 lines
tests/kms_plane_scaling.c +0
-0igt_fixture {igt_display_fini (&data.display);close (data.drm_fd);
Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size
Quoted 134 lines · Juha-Pekka Heikkila
Quoted 42 lines · Swati Sharma
i915 specific test is added to validate max source size. This test is expected to return
-EINVALfor platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).On
MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]]scaler_userindex 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass onADLP(display_ver=13)since max source width supported is 5120.Signed-off-by Swati Sharma <[email protected]>---
tests/kms_plane_scaling.c| 94 +++++++++++++++++++++++++++++++++++++++1 file changed, 94 insertions(+)tests/kms_plane_scaling.c +17
-0@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d) } } +/* +* Max source/destination width/height +* for i915 driver. +* +* DISPLAY_VER < 11 +* max_src_w = 4096 +* max_src_h = 4096 +* max_dst_w = 4096 +* max_dst_h = 4096 +* +* DISPLAY_VER = 11 +* max_src_w = 5120 +* max_src_h = 4096 +* max_dst_w = 5120 +* max_dst_h = 4096 +* +* DISPLAY_VER = 12-13 tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 918
Quoted 10 lines
tests/kms_plane_scaling.c +10
-0+ * max_src_w = 5120 + * max_src_h = 8192 + * max_dst_w = 8192 + * max_dst_h = 8192 + * + * DISPLAY_VER = 14 + * max_src_w = 4096 + * max_src_h = 8192 + * max_dst_w = 8192 + * max_dst_h = 8192I think here could be added comment these numbers are coming from
drivers/gpu/drm/i915/display/skl_scaler.cin kernel sourcestests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 930
Quoted 11 lines
tests/kms_plane_scaling.c +11
-0+*/ + +static void i915_max_source_size_test (data_t *d) +{ + enum pipe pipe = PIPE_A; + igt_output_t *output; + igt_fb_t fb; + igt_plane_t *plane; + int rval; + + static const struct invalid_paramtests paramtests[1] = {"static const struct
invalid_paramtestsparamtests[]" would be better here, ie. not declaring here how long is the list of testsQuoted 9 lines
tests/kms_plane_scaling.c +9
-0+ { + .testname = "max-src-size", + .planesize = {3840, 2400}, + .params = {{~0}} + }, + }; + + igt_fixture { + output = igt_get_single_output_for_pipe(&d->display, pipe);tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 948
Quoted 10 lines
tests/kms_plane_scaling.c +9
-0+ igt_require(output); + + igt_output_set_pipe(output, pipe); + plane = igt_output_get_plane_type(output,DRM_PLANE_TYPE_PRIMARY ); + + igt_create_fb(d->drm_fd, 5120, 4320, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_MOD_NONE, + &fb);above indentation is off on those lines with parameters.
Quoted 42 lines
tests/kms_plane_scaling.c +33
-0+ } + + igt_describe("test for validating max source size."); + igt_subtest_with_dynamic("i915-max-source-size") { + for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) { + igt_dynamic(paramtests[i].testname) { + igt_plane_set_position(plane, 0, 0); + igt_plane_set_fb(plane, &fb); + igt_plane_set_size(plane, + paramtests[i].planesize[0], + paramtests[i].planesize[1]); + + for (uint32_t j = 0; paramtests[i].params[j].prop != ~0 ; j++) + igt_plane_set_prop_value(plane, + paramtests[i].params[j].prop, + paramtests[i].params[j].value); + + rval = igt_display_try_commit2(&d->display,COMMIT_ATOMIC ); + + if (intel_display_ver(d->devid) < 11 ||intel_display_ver (d->devid) >=14 ) + igt_assert(rval == -EINVAL || rval == -ERANGE); + else + igt_assert_eq(rval, 0); + } + } + } + + igt_fixture { + igt_remove_fb(d->drm_fd, &fb); + igt_output_set_pipe(output, PIPE_NONE); + } +} +static int
opt_handler(int opt, int opt_index, void *_data){
data_t*data =_data;tests/kms_plane_scaling.c +0
-0@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data) invalid_parameter_tests(&data);
Quoted 8 lines
tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1151
Quoted 6 lines
tests/kms_plane_scaling.c +5
-0+ igt_fixture + igt_require_f(data.devid, "This test is valid only for i915 devices.\n"); + + i915_max_source_size_test(&data); +These above changes I think could be wrapped inside
igt_subtest_groupso that i915 requirement doesn't become inherited if someone come add something here after this test.
Done. Sent new series with the fixes https://patchwork.freedesktop.org/series/114059/
Quoted 5 lines
Quoted 4 lines
tests/kms_plane_scaling.c +0
-0igt_fixture { igt_display_fini(&data.display); close(data.drm_fd);
Signature · 1 line
~Swati Sharma
Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size
In reply to Swati SharmaHi Swati,
Quoted 6 lines · Swati Sharma
i915 specific test is added to validate max source size. This test is expected to return
-EINVALfor platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).
Quoted 8 lines
On
MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]]scaler_userindex 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass onADLP(display_ver=13)since max source width supported is 5120.Signed-off-by Swati Sharma <[email protected]>
+cc Juha-Pekka
Quoted 50 lines
--- tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)tests/kms_plane_scaling.c +38
-0@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d) } } +/* +* Max source/destination width/height +* for i915 driver. +* +* DISPLAY_VER < 11 +* max_src_w = 4096 +* max_src_h = 4096 +* max_dst_w = 4096 +* max_dst_h = 4096 +* +* DISPLAY_VER = 11 +* max_src_w = 5120 +* max_src_h = 4096 +* max_dst_w = 5120 +* max_dst_h = 4096 +* +* DISPLAY_VER = 12-13 +* max_src_w = 5120 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +* +* DISPLAY_VER = 14 +* max_src_w = 4096 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +*/ + +static void i915_max_source_size_test (data_t *d) +{ +enum pipe pipe =PIPE_A ; +igt_output_t *output; +igt_fb_t fb; +igt_plane_t *plane; +int rval; + +static const struct invalid_paramtests paramtests[1 ] = {
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 940
Quoted 10 lines
tests/kms_plane_scaling.c +10
-0+ { + .testname = "max-src-size", + .planesize = {3840, 2400}, + .params = {{~0}} + }, + }; + + igt_fixture { + output =igt_get_single_output_for_pipe (&d->display, pipe); +igt_require (output);
--------------- ^
You are not in subtest.
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 949
Quoted 9 lines
tests/kms_plane_scaling.c +9
-0+ +igt_output_set_pipe (output, pipe); + plane =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + +igt_create_fb (d->drm_fd,5120 ,4320 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_NONE , + &fb); + }
Is this fixture only for i915 ? It looks generic, even if igt_create_fb will fail (but you need to remember fb_id here).
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 952
Quoted 3 lines
tests/kms_plane_scaling.c +3
-0+ +igt_describe ("test for validating max source size." ); + igt_subtest_with_dynamic("i915-max-source-size") {
Here you can put igt_require for i915 driver and also require for fb_id != 0.
Quoted 33 lines
tests/kms_plane_scaling.c +29
-0+for (uint32_t i =0 ; i <ARRAY_SIZE (paramtests); i++) { + igt_dynamic(paramtests[i].testname) { +igt_plane_set_position (plane,0 ,0 ); +igt_plane_set_fb (plane, &fb); +igt_plane_set_size (plane, + paramtests[i].planesize[0 ], + paramtests[i].planesize[1 ]); + +for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) +igt_plane_set_prop_value (plane, + paramtests[i].params[j].prop, + paramtests[i].params[j].value); + + rval =igt_display_try_commit2 (&d->display,COMMIT_ATOMIC ); + +if (intel_display_ver (d->devid) <11 ||intel_display_ver (d->devid) >=14 ) +igt_assert (rval == -EINVAL || rval == -ERANGE ); +else +igt_assert_eq (rval,0 ); + } + } + } + + igt_fixture { +igt_remove_fb (d->drm_fd, &fb); +igt_output_set_pipe (output,PIPE_NONE ); + } +} +static int opt_handler (int opt,int opt_index,void *_data) {data_t *data = _data;
tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1148
Quoted 5 lines
tests/kms_plane_scaling.c +2
-0@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)invalid_parameter_tests (&data); + igt_fixture + igt_require_f(data.devid, "This test is valid only for i915 devices.\n");
Do not do this, use igt_require_f inside (dynamic_)subtest.
Regards,
Kamil
Quoted 9 lines
tests/kms_plane_scaling.c +3
-0+ +i915_max_source_size_test (&data); + igt_fixture {igt_display_fini (&data.display);close (data.drm_fd);Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size
Quoted 83 lines · Kamil Konieczny
Hi Swati,
Quoted 6 lines · Swati Sharma
i915 specific test is added to validate max source size. This test is expected to return
-EINVALfor platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).Quoted 8 lines
On
MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]]scaler_userindex 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass onADLP(display_ver=13)since max source width supported is 5120.Signed-off-by Swati Sharma <[email protected]>+cc Juha-Pekka
Quoted 50 lines
--- tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)tests/kms_plane_scaling.c +38
-0@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d) } } +/* +* Max source/destination width/height +* for i915 driver. +* +* DISPLAY_VER < 11 +* max_src_w = 4096 +* max_src_h = 4096 +* max_dst_w = 4096 +* max_dst_h = 4096 +* +* DISPLAY_VER = 11 +* max_src_w = 5120 +* max_src_h = 4096 +* max_dst_w = 5120 +* max_dst_h = 4096 +* +* DISPLAY_VER = 12-13 +* max_src_w = 5120 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +* +* DISPLAY_VER = 14 +* max_src_w = 4096 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +*/ + +static void i915_max_source_size_test (data_t *d) +{ +enum pipe pipe =PIPE_A ; +igt_output_t *output; +igt_fb_t fb; +igt_plane_t *plane; +int rval; + +static const struct invalid_paramtests paramtests[1 ] = {tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 940
Quoted 10 lines
tests/kms_plane_scaling.c +10
-0+ { + .testname = "max-src-size", + .planesize = {3840, 2400}, + .params = {{~0}} + }, + }; + + igt_fixture { + output =igt_get_single_output_for_pipe (&d->display, pipe); +igt_require (output);--------------- ^
You are not in subtest.
Quoted 12 lines
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 949
Quoted 9 lines
tests/kms_plane_scaling.c +9
-0+ +igt_output_set_pipe (output, pipe); + plane =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + +igt_create_fb (d->drm_fd,5120 ,4320 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_NONE , + &fb); + }Is this fixture only for i915 ? It looks generic, even if
igt_create_fbwill fail (but you need to rememberfb_idhere).
just quickly drive by commenting.. these tests on this patch are for i915, hence above fixture is for tests below.
Quoted 8 lines
tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 952
Quoted 4 lines
tests/kms_plane_scaling.c +3
-0+ +igt_describe ("test for validating max source size." ); + igt_subtest_with_dynamic("i915-max-source-size") {Here you can put
igt_requirefor i915 driver and also require forfb_id!= 0.
If igt_create_fb will fail it will assert out at igt_create_fb_with_bo_size and there's no point in checking for fb_id being zero.
Quoted 34 lines
Quoted 34 lines
tests/kms_plane_scaling.c +29
-0+for (uint32_t i =0 ; i <ARRAY_SIZE (paramtests); i++) { + igt_dynamic(paramtests[i].testname) { +igt_plane_set_position (plane,0 ,0 ); +igt_plane_set_fb (plane, &fb); +igt_plane_set_size (plane, + paramtests[i].planesize[0 ], + paramtests[i].planesize[1 ]); + +for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) +igt_plane_set_prop_value (plane, + paramtests[i].params[j].prop, + paramtests[i].params[j].value); + + rval =igt_display_try_commit2 (&d->display,COMMIT_ATOMIC ); + +if (intel_display_ver (d->devid) <11 ||intel_display_ver (d->devid) >=14 ) +igt_assert (rval == -EINVAL || rval == -ERANGE ); +else +igt_assert_eq (rval,0 ); + } + } + } + + igt_fixture { +igt_remove_fb (d->drm_fd, &fb); +igt_output_set_pipe (output,PIPE_NONE ); + } +} +static int opt_handler (int opt,int opt_index,void *_data) {data_t *data = _data;@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
Quoted 6 lines
tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1148
Quoted 4 lines
tests/kms_plane_scaling.c +2
-0invalid_parameter_tests (&data); + igt_fixture + igt_require_f(data.devid, "This test is valid only for i915 devices.\n");Do not do this, use
igt_require_finside (dynamic_)subtest.
Imo igt_subtest_group is what's needed to be put around these, fixture is meant for this checking when anything inside will depend on something. Putting igt_require_f inside subtest will just waste test execution time when on platform where required conditions are not met. You can see same pattern used on other tests, simplest example coming to my mind at kms_addfb_basic.
/Juha-Pekka
Quoted 10 lines
Quoted 10 lines
tests/kms_plane_scaling.c +3
-0+ +i915_max_source_size_test (&data); + igt_fixture {igt_display_fini (&data.display);close (data.drm_fd);Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size
In reply to Kamil KoniecznyHi Kamil,
I have floated next rev https://patchwork.freedesktop.org/series/114059/
addressing review comments from JP.
igt_require() inside dynamic_subtest() is not recommended. All these conditions should be checked before executing the test. In the past, we have seen CRASHES if such conditions are put inside the subtest.
Quoted 156 lines · Kamil Konieczny
Hi Swati,
Quoted 6 lines · Swati Sharma
i915 specific test is added to validate max source size. This test is expected to return
-EINVALfor platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).Quoted 8 lines
On
MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]]scaler_userindex 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass onADLP(display_ver=13)since max source width supported is 5120.Signed-off-by Swati Sharma <[email protected]>+cc Juha-Pekka
Quoted 50 lines
--- tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)tests/kms_plane_scaling.c +38
-0@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d) } } +/* +* Max source/destination width/height +* for i915 driver. +* +* DISPLAY_VER < 11 +* max_src_w = 4096 +* max_src_h = 4096 +* max_dst_w = 4096 +* max_dst_h = 4096 +* +* DISPLAY_VER = 11 +* max_src_w = 5120 +* max_src_h = 4096 +* max_dst_w = 5120 +* max_dst_h = 4096 +* +* DISPLAY_VER = 12-13 +* max_src_w = 5120 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +* +* DISPLAY_VER = 14 +* max_src_w = 4096 +* max_src_h = 8192 +* max_dst_w = 8192 +* max_dst_h = 8192 +*/ + +static void i915_max_source_size_test (data_t *d) +{ +enum pipe pipe =PIPE_A ; +igt_output_t *output; +igt_fb_t fb; +igt_plane_t *plane; +int rval; + +static const struct invalid_paramtests paramtests[1 ] = {tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 940
Quoted 10 lines
tests/kms_plane_scaling.c +10
-0+ { + .testname = "max-src-size", + .planesize = {3840, 2400}, + .params = {{~0}} + }, + }; + + igt_fixture { + output =igt_get_single_output_for_pipe (&d->display, pipe); +igt_require (output);--------------- ^
You are not in subtest.tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 949
Quoted 9 lines
tests/kms_plane_scaling.c +9
-0+ +igt_output_set_pipe (output, pipe); + plane =igt_output_get_plane_type (output,DRM_PLANE_TYPE_PRIMARY ); + +igt_create_fb (d->drm_fd,5120 ,4320 , +DRM_FORMAT_XRGB8888 , +DRM_FORMAT_MOD_NONE , + &fb); + }Is this fixture only for i915 ? It looks generic, even if
igt_create_fbwill fail (but you need to rememberfb_idhere).tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 952
Quoted 3 lines
tests/kms_plane_scaling.c +3
-0+ +igt_describe ("test for validating max source size." ); + igt_subtest_with_dynamic("i915-max-source-size") {Here you can put
igt_requirefor i915 driver and also require forfb_id!= 0.Quoted 33 lines
tests/kms_plane_scaling.c +29
-0+for (uint32_t i =0 ; i <ARRAY_SIZE (paramtests); i++) { + igt_dynamic(paramtests[i].testname) { +igt_plane_set_position (plane,0 ,0 ); +igt_plane_set_fb (plane, &fb); +igt_plane_set_size (plane, + paramtests[i].planesize[0 ], + paramtests[i].planesize[1 ]); + +for (uint32_t j =0 ; paramtests[i].params[j].prop != ~0 ; j++) +igt_plane_set_prop_value (plane, + paramtests[i].params[j].prop, + paramtests[i].params[j].value); + + rval =igt_display_try_commit2 (&d->display,COMMIT_ATOMIC ); + +if (intel_display_ver (d->devid) <11 ||intel_display_ver (d->devid) >=14 ) +igt_assert (rval == -EINVAL || rval == -ERANGE ); +else +igt_assert_eq (rval,0 ); + } + } + } + + igt_fixture { +igt_remove_fb (d->drm_fd, &fb); +igt_output_set_pipe (output,PIPE_NONE ); + } +} +static int opt_handler (int opt,int opt_index,void *_data) {data_t *data = _data;tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1148
Quoted 5 lines
tests/kms_plane_scaling.c +2
-0@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)invalid_parameter_tests (&data); + igt_fixture + igt_require_f(data.devid, "This test is valid only for i915 devices.\n");Do not do this, use
igt_require_finside (dynamic_)subtest.Regards,
KamilQuoted 9 lines
tests/kms_plane_scaling.c +3
-0+ +i915_max_source_size_test (&data); + igt_fixture {igt_display_fini (&data.display);close (data.drm_fd);Signature · 1 line
2.25.1
Signature · 1 line
~Swati Sharma
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Validate max source size (rev2)
In reply to Swati Sharma== Series Details ==
== Series Details ==
Series: Validate max source size (rev2)
URL : https://patchwork.freedesktop.org/series/114059/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_12744 -> IGTPW_8503
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
Participating hosts (40 -> 39)
------------------------------
Additional (1): fi-kbl-soraka
Missing (2): bat-kbl-2 fi-snb-2520m
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_8503:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@i915_suspend@basic-s2idle-without-i915:
- {bat-rpls-1}: [PASS][1] -> [ABORT][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/bat-rpls-1/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/bat-rpls-1/igt@[email protected]
Known issues
------------
Here are the changes found in IGTPW_8503 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_gttfill@basic:
- fi-kbl-soraka: NOTRUN -> [SKIP][3] ([fdo#109271]) +15 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@[email protected]
* igt@gem_exec_suspend@basic-s3@smem:
- fi-rkl-11600: [PASS][4] -> [FAIL][5] ([fdo#103375]) +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/fi-rkl-11600/igt@gem_exec_suspend@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-rkl-11600/igt@gem_exec_suspend@[email protected]
* igt@gem_huc_copy@huc-copy:
- fi-kbl-soraka: NOTRUN -> [SKIP][6] ([fdo#109271] / [i915#2190])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@[email protected]
* igt@gem_lmem_swapping@basic:
- fi-kbl-soraka: NOTRUN -> [SKIP][7] ([fdo#109271] / [i915#4613]) +3 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@[email protected]
* igt@i915_selftest@live@execlists:
- fi-kbl-soraka: NOTRUN -> [INCOMPLETE][8] ([i915#7913])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@gt_pm:
- fi-kbl-soraka: NOTRUN -> [DMESG-FAIL][9] ([i915#1886])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@i915_selftest@live@gt_pm.html
#### Possible fixes ####
* igt@i915_selftest@live@hangcheck:
- fi-skl-guc: [DMESG-WARN][10] ([i915#8073]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/fi-skl-guc/igt@i915_selftest@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-skl-guc/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@mman:
- {bat-rpls-1}: [TIMEOUT][12] ([i915#6794]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/bat-rpls-1/igt@i915_selftest@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/bat-rpls-1/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@reset:
- {bat-rpls-2}: [ABORT][14] ([i915#4983]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/bat-rpls-2/igt@i915_selftest@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/bat-rpls-2/igt@i915_selftest@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1886]: https://gitlab.freedesktop.org/drm/intel/issues/1886
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#6794]: https://gitlab.freedesktop.org/drm/intel/issues/6794
[i915#6997]: https://gitlab.freedesktop.org/drm/intel/issues/6997
[i915#7913]: https://gitlab.freedesktop.org/drm/intel/issues/7913
[i915#8073]: https://gitlab.freedesktop.org/drm/intel/issues/8073
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7160 -> IGTPW_8503
CI-20190529: 20190529
CI_DRM_12744: 2e4cac06e4de01a35626de676b9eeb474ae7ab5d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8503: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
IGT_7160: 45da871dd2684227e93a2fc002b87dfc58bd5fd9 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Testlist changes
----------------
+igt@kms_plane_scaling@i915-max-source-size -igt@v3d/v3d_job_submission@array-job-submission -igt@v3d/v3d_job_submission@multiple-singlesync-to-multisync -igt@v3d/v3d_job_submission@threaded-job-submission -igt@v3d/v3d_submit_csd@bad-bo -igt@v3d/v3d_submit_csd@bad-extension -igt@v3d/v3d_submit_csd@bad-flag -igt@v3d/v3d_submit_csd@bad-in-sync -igt@v3d/v3d_submit_csd@bad-multisync-extension -igt@v3d/v3d_submit_csd@bad-multisync-in-sync -igt@v3d/v3d_submit_csd@bad-multisync-out-sync -igt@v3d/v3d_submit_csd@bad-multisync-pad -igt@v3d/v3d_submit_csd@bad-pad -igt@v3d/v3d_submit_csd@bad-perfmon -igt@v3d/v3d_submit_csd@job-perfmon -igt@v3d/v3d_submit_csd@multiple-job-submission -igt@v3d/v3d_submit_csd@multisync-out-syncs -igt@v3d/v3d_submit_csd@multi-and-single-sync -igt@v3d/v3d_submit_csd@single-in-sync -igt@v3d/v3d_submit_csd@single-out-sync -igt@v3d/v3d_submit_csd@valid-multisync-submission -igt@v3d/v3d_submit_csd@valid-submission
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Validate max source size (rev2)
In reply to Swati Sharma== Series Details ==
== Series Details ==
Series: Validate max source size (rev2)
URL : https://patchwork.freedesktop.org/series/114059/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_12744_full -> IGTPW_8503_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
Participating hosts (10 -> 11)
------------------------------
Additional (1): shard-rkl0
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_8503_full:
### IGT changes ###
#### Possible regressions ####
* {igt@kms_plane_scaling@i915-max-source-size@max-src-size} (NEW):
- shard-apl: NOTRUN -> [FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@kms_plane_scaling@[email protected]
- shard-glk: NOTRUN -> [FAIL][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk6/igt@kms_plane_scaling@[email protected]
New tests
---------
New tests have been introduced between CI_DRM_12744_full and IGTPW_8503_full:
### New IGT tests (2) ###
* igt@kms_plane_scaling@i915-max-source-size:
- Statuses :
- Exec time: [None] s
* igt@kms_plane_scaling@i915-max-source-size@max-src-size:
- Statuses : 2 fail(s) 2 pass(s)
- Exec time: [0.0] s
Known issues
------------
Here are the changes found in IGTPW_8503_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_fair@basic-none@vecs0:
- shard-glk: [PASS][3] -> [FAIL][4] ([i915#2842])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk2/igt@gem_exec_fair@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk4/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-apl: [PASS][5] -> [FAIL][6] ([i915#2842])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl3/igt@gem_exec_fair@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@gem_exec_fair@[email protected]
* igt@gem_exec_schedule@wide@rcs0:
- shard-glk: [PASS][7] -> [FAIL][8] ([i915#6659])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk9/igt@gem_exec_schedule@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk8/igt@gem_exec_schedule@[email protected]
* igt@gem_userptr_blits@vma-merge:
- shard-apl: NOTRUN -> [FAIL][9] ([i915#3318])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@[email protected]
* igt@gen9_exec_parse@allowed-single:
- shard-apl: [PASS][10] -> [ABORT][11] ([i915#5566])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl2/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl6/igt@[email protected]
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-vga:
- shard-snb: NOTRUN -> [SKIP][12] ([fdo#109271]) +25 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-snb6/igt@i915_pm_lpsp@[email protected]
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible@bc-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][13] -> [FAIL][14] ([i915#79]) +1 similar issue
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk2/igt@kms_flip@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk9/igt@kms_flip@[email protected]
* igt@kms_flip@2x-plain-flip-ts-check-interruptible@ab-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][15] -> [FAIL][16] ([i915#2122])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk1/igt@kms_flip@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk3/igt@kms_flip@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-gtt:
- shard-glk: NOTRUN -> [SKIP][17] ([fdo#109271]) +7 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk4/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-gtt.html
* igt@kms_plane_alpha_blend@alpha-transparent-fb@pipe-c-dp-1:
- shard-apl: NOTRUN -> [FAIL][18] ([i915#4573]) +1 similar issue
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl2/igt@kms_plane_alpha_blend@[email protected]
* igt@kms_plane_scaling@plane-downscale-with-rotation-factor-0-75@pipe-b-dp-1:
- shard-apl: NOTRUN -> [SKIP][19] ([fdo#109271]) +32 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@kms_plane_scaling@[email protected]
#### Possible fixes ####
* igt@drm_fdinfo@most-busy-idle-check-all@rcs0:
- {shard-rkl}: [FAIL][20] ([i915#7742]) -> [PASS][21]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-6/igt@drm_fdinfo@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@drm_fdinfo@[email protected]
* igt@fbdev@eof:
- {shard-rkl}: [SKIP][22] ([i915#2582]) -> [PASS][23] +1 similar issue
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-3/igt@[email protected]
- {shard-tglu}: [SKIP][24] ([i915#2582]) -> [PASS][25]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-tglu-6/igt@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-tglu-4/igt@[email protected]
* igt@gem_bad_reloc@negative-reloc:
- {shard-rkl}: [SKIP][26] ([i915#3281]) -> [PASS][27] +8 similar issues
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@[email protected]
* igt@gem_ctx_exec@basic-nohangcheck:
- {shard-rkl}: [FAIL][28] ([i915#6268]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-2/igt@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-3/igt@[email protected]
* igt@gem_ctx_isolation@preservation-s3@vcs0:
- shard-apl: [ABORT][30] -> [PASS][31]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl1/igt@gem_ctx_isolation@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl2/igt@gem_ctx_isolation@[email protected]
* igt@gem_eio@in-flight-external:
- {shard-rkl}: [ABORT][32] ([i915#7811]) -> [PASS][33]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-1/igt@[email protected]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@[email protected]
* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-glk: [FAIL][34] ([i915#2842]) -> [PASS][35]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk9/igt@gem_exec_fair@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk7/igt@gem_exec_fair@[email protected]
* igt@gem_exec_suspend@basic-s3@smem:
- {shard-rkl}: [ABORT][36] ([i915#5122]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@gem_exec_suspend@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-3/igt@gem_exec_suspend@[email protected]
* igt@gem_pread@self:
- {shard-rkl}: [SKIP][38] ([i915#3282]) -> [PASS][39] +3 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-3/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@[email protected]
* igt@gen9_exec_parse@allowed-single:
- shard-glk: [ABORT][40] ([i915#5566]) -> [PASS][41]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk6/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk4/igt@[email protected]
* igt@gen9_exec_parse@bb-chained:
- {shard-rkl}: [SKIP][42] ([i915#2527]) -> [PASS][43] +2 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-3/igt@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@[email protected]
* igt@i915_pm_dc@dc9-dpms:
- shard-apl: [SKIP][44] ([fdo#109271]) -> [PASS][45]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl7/igt@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl6/igt@[email protected]
* igt@i915_pm_rpm@drm-resources-equal:
- {shard-rkl}: [SKIP][46] ([fdo#109308]) -> [PASS][47]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-5/igt@[email protected]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-indfb-fliptrack-mmap-gtt:
- {shard-tglu}: [SKIP][48] ([i915#1849]) -> [PASS][49] +2 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-tglu-6/igt@[email protected]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-tglu-3/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- {shard-rkl}: [SKIP][50] ([i915#1849] / [i915#4098]) -> [PASS][51] +12 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-1/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt.html
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt.html
* igt@kms_psr@sprite_plane_onoff:
- {shard-rkl}: [SKIP][52] ([i915#1072]) -> [PASS][53] +1 similar issue
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@kms_psr@sprite_plane_onoff.html
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@kms_psr@sprite_plane_onoff.html
* igt@kms_vblank@pipe-a-query-forked:
- {shard-tglu}: [SKIP][54] ([i915#1845] / [i915#7651]) -> [PASS][55] +13 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-tglu-6/igt@[email protected]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-tglu-1/igt@[email protected]
* igt@kms_vblank@pipe-a-ts-continuation-idle:
- {shard-rkl}: [SKIP][56] ([i915#1845] / [i915#4098]) -> [PASS][57] +9 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@[email protected]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109283]: https://bugs.freedesktop.org/show_bug.cgi?id=109283
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109308]: https://bugs.freedesktop.org/show_bug.cgi?id=109308
[fdo#109312]: https://bugs.freedesktop.org/show_bug.cgi?id=109312
[fdo#109313]: https://bugs.freedesktop.org/show_bug.cgi?id=109313
[fdo#109314]: https://bugs.freedesktop.org/show_bug.cgi?id=109314
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111644]: https://bugs.freedesktop.org/show_bug.cgi?id=111644
[fdo#111656]: https://bugs.freedesktop.org/show_bug.cgi?id=111656
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1257]: https://gitlab.freedesktop.org/drm/intel/issues/1257
[i915#132]: https://gitlab.freedesktop.org/drm/intel/issues/132
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1825]: https://gitlab.freedesktop.org/drm/intel/issues/1825
[i915#1839]: https://gitlab.freedesktop.org/drm/intel/issues/1839
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#1902]: https://gitlab.freedesktop.org/drm/intel/issues/1902
[i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
[i915#2434]: https://gitlab.freedesktop.org/drm/intel/issues/2434
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2658]: https://gitlab.freedesktop.org/drm/intel/issues/2658
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
[i915#2705]: https://gitlab.freedesktop.org/drm/intel/issues/2705
[i915#280]: https://gitlab.freedesktop.org/drm/intel/issues/280
[i915#284]: https://gitlab.freedesktop.org/drm/intel/issues/284
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2846]: https://gitlab.freedesktop.org/drm/intel/issues/2846
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
[i915#3116]: https://gitlab.freedesktop.org/drm/intel/issues/3116
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/intel/issues/3291
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3299]: https://gitlab.freedesktop.org/drm/intel/issues/3299
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3318]: https://gitlab.freedesktop.org/drm/intel/issues/3318
[i915#3323]: https://gitlab.freedesktop.org/drm/intel/issues/3323
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3361]: https://gitlab.freedesktop.org/drm/intel/issues/3361
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3528]: https://gitlab.freedesktop.org/drm/intel/issues/3528
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3558]: https://gitlab.freedesktop.org/drm/intel/issues/3558
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/intel/issues/3638
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3734]: https://gitlab.freedesktop.org/drm/intel/issues/3734
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3952]: https://gitlab.freedesktop.org/drm/intel/issues/3952
[i915#3955]: https://gitlab.freedesktop.org/drm/intel/issues/3955
[i915#404]: https://gitlab.freedesktop.org/drm/intel/issues/404
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4098]: https://gitlab.freedesktop.org/drm/intel/issues/4098
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4215]: https://gitlab.freedesktop.org/drm/intel/issues/4215
[i915#426]: https://gitlab.freedesktop.org/drm/intel/issues/426
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4387]: https://gitlab.freedesktop.org/drm/intel/issues/4387
[i915#4525]: https://gitlab.freedesktop.org/drm/intel/issues/4525
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#4565]: https://gitlab.freedesktop.org/drm/intel/issues/4565
[i915#4573]: https://gitlab.freedesktop.org/drm/intel/issues/4573
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4771]: https://gitlab.freedesktop.org/drm/intel/issues/4771
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4879]: https://gitlab.freedesktop.org/drm/intel/issues/4879
[i915#4880]: https://gitlab.freedesktop.org/drm/intel/issues/4880
[i915#4885]: https://gitlab.freedesktop.org/drm/intel/issues/4885
[i915#4958]: https://gitlab.freedesktop.org/drm/intel/issues/4958
[i915#5122]: https://gitlab.freedesktop.org/drm/intel/issues/5122
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5431]: https://gitlab.freedesktop.org/drm/intel/issues/5431
[i915#5439]: https://gitlab.freedesktop.org/drm/intel/issues/5439
[i915#5461]: https://gitlab.freedesktop.org/drm/intel/issues/5461
[i915#5563]: https://gitlab.freedesktop.org/drm/intel/issues/5563
[i915#5566]: https://gitlab.freedesktop.org/drm/intel/issues/5566
[i915#5723]: https://gitlab.freedesktop.org/drm/intel/issues/5723
[i915#5784]: https://gitlab.freedesktop.org/drm/intel/issues/5784
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6117]: https://gitlab.freedesktop.org/drm/intel/issues/6117
[i915#6247]: https://gitlab.freedesktop.org/drm/intel/issues/6247
[i915#6248]: https://gitlab.freedesktop.org/drm/intel/issues/6248
[i915#6252]: https://gitlab.freedesktop.org/drm/intel/issues/6252
[i915#6258]: https://gitlab.freedesktop.org/drm/intel/issues/6258
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6335]: https://gitlab.freedesktop.org/drm/intel/issues/6335
[i915#6412]: https://gitlab.freedesktop.org/drm/intel/issues/6412
[i915#6433]: https://gitlab.freedesktop.org/drm/intel/issues/6433
[i915#6497]: https://gitlab.freedesktop.org/drm/intel/issues/6497
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6590]: https://gitlab.freedesktop.org/drm/intel/issues/6590
[i915#6659]: https://gitlab.freedesktop.org/drm/intel/issues/6659
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#6944]: https://gitlab.freedesktop.org/drm/intel/issues/6944
[i915#6953]: https://gitlab.freedesktop.org/drm/intel/issues/6953
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7128]: https://gitlab.freedesktop.org/drm/intel/issues/7128
[i915#7294]: https://gitlab.freedesktop.org/drm/intel/issues/7294
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561
[i915#7582]: https://gitlab.freedesktop.org/drm/intel/issues/7582
[i915#7651]: https://gitlab.freedesktop.org/drm/intel/issues/7651
[i915#7697]: https://gitlab.freedesktop.org/drm/intel/issues/7697
[i915#7707]: https://gitlab.freedesktop.org/drm/intel/issues/7707
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7811]: https://gitlab.freedesktop.org/drm/intel/issues/7811
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#7949]: https://gitlab.freedesktop.org/drm/intel/issues/7949
[i915#7957]: https://gitlab.freedesktop.org/drm/intel/issues/7957
[i915#7975]: https://gitlab.freedesktop.org/drm/intel/issues/7975
[i915#7984]: https://gitlab.freedesktop.org/drm/intel/issues/7984
[i915#8151]: https://gitlab.freedesktop.org/drm/intel/issues/8151
[i915#8152]: https://gitlab.freedesktop.org/drm/intel/issues/8152
[i915#8155]: https://gitlab.freedesktop.org/drm/intel/issues/8155
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_7160 -> IGTPW_8503
CI-20190529: 20190529
CI_DRM_12744: 2e4cac06e4de01a35626de676b9eeb474ae7ab5d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8503: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
IGT_7160: 45da871dd2684227e93a2fc002b87dfc58bd5fd9 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html