Skip to contentSkip to conversation

Validate max source size

PATCH Superseded Swati Sharma 4 participants 15 messages Feb 15, 2023 – Feb 17, 2023

v1 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

cover Validate max source size

i915 specific test is added to validate max source size.

Swati Sharma (3):
tests/kms_plane_scaling: Prep work tests/kms_plane_scaling: Remove extra newline tests/kms_plane_scaling: Add test to validate max source size

 tests/kms_plane_scaling.c | 113 +++++++++++++++++++++++++++++++++++---
 1 file changed, 104 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/3 tests/kms_plane_scaling: Prep work

struct can be reused to add more test cases.

---
 tests/kms_plane_scaling.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
tests/kms_plane_scaling.c +10 -8
index 4a04f42a0..382d199e0 100644
@@ -42,6 +42,15 @@ typedef struct {
 	bool extended;
 } data_t;
 
+struct invalid_paramtests {
+	const char *testname;
+	uint32_t planesize[2];
+	struct {
+		enum igt_atomic_plane_properties prop;
+		uint32_t value;
+	} params[8];
+};
+
 const struct {
 	const char * const describe;
 	const char * const name;
@@ -827,14 +836,7 @@ static void invalid_parameter_tests(data_t *d)
 	igt_plane_t *plane;
 	int rval;
 
-	const struct {
-		const char *testname;
-		uint32_t planesize[2];
-		struct {
-			enum igt_atomic_plane_properties prop;
-			uint32_t value;
-		} params[8];
-	} paramtests[] = {
+	static const struct invalid_paramtests paramtests[2] = {
 		{
 			.testname = "less-than-1-height-src",
 			.planesize = {256, 8},
Signature · 1 line
2.25.1
#2 lore raw

Re: [igt-dev] [PATCH i-g-t 1/3] tests/kms_plane_scaling: Prep work

Quoted 30 lines · Swati Sharma

struct can be reused to add more test cases.

---
  tests/kms_plane_scaling.c | 18 ++++++++++--------
  1 file changed, 10 insertions(+), 8 deletions(-)
tests/kms_plane_scaling.c +9 -0
index 4a04f42a0..382d199e0 100644
@@ -42,6 +42,15 @@ typedef struct {
  	bool extended;
  } data_t;
 
+struct invalid_paramtests {
+	const char *testname;
+	uint32_t planesize[2];
+	struct {
+		enum igt_atomic_plane_properties prop;
+		uint32_t value;
+	} params[8];
+};
+
  const struct {
  	const char * const describe;
  	const char * const name;
@@ -827,14 +836,7 @@ static void invalid_parameter_tests(data_t *d)
  	igt_plane_t *plane;
  	int rval;

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 839

Quoted 10 lines
tests/kms_plane_scaling.c +1 -8
 
-	const struct {
-		const char *testname;
-		uint32_t planesize[2];
-		struct {
-			enum igt_atomic_plane_properties prop;
-			uint32_t value;
-		} params[8];
-	} paramtests[] = {
+	static const struct invalid_paramtests paramtests[2] = {

"static const struct invalid_paramtests paramtests[]" would be better here, ie. not declaring here how long is the list of tests

Quoted 3 lines
tests/kms_plane_scaling.c +0 -0
  		{
  			.testname = "less-than-1-height-src",
  			.planesize = {256, 8},
#3 lore raw

Re: [igt-dev] [PATCH i-g-t 1/3] tests/kms_plane_scaling: Prep work

Quoted 33 lines · Juha-Pekka Heikkila
Quoted 32 lines · Swati Sharma

struct can be reused to add more test cases.

---
  tests/kms_plane_scaling.c | 18 ++++++++++--------

  1 file changed, 10 insertions(+), 8 deletions(-)
tests/kms_plane_scaling.c +9 -3
index 4a04f42a0..382d199e0 100644
@@ -42,6 +42,15 @@ typedef struct {
       bool extended;
   } data_t;
+struct invalid_paramtests {
+    const char *testname;
+    uint32_t planesize[2];
+    struct {
+        enum igt_atomic_plane_properties prop;
+        uint32_t value;
+    } params[8];
+};
+
   const struct {
       const char * const describe;
       const char * const name;
@@ -827,14 +836,7 @@ static void invalid_parameter_tests(data_t *d)
       igt_plane_t *plane;
       int rval;
-    const struct {
-        const char *testname;
-        uint32_t planesize[2];
Quoted 8 lines

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 839

Quoted 6 lines
tests/kms_plane_scaling.c +1 -5
-        struct {
-            enum igt_atomic_plane_properties prop;
-            uint32_t value;
-        } params[8];
-    } paramtests[] = {
+    static const struct invalid_paramtests paramtests[2] = {

"static const struct invalid_paramtests paramtests[]" would be better here, ie. not declaring here how long is the list of tests

Done. Added new series with the fixes https://patchwork.freedesktop.org/series/114059/

Quoted 5 lines
Quoted 4 lines
tests/kms_plane_scaling.c +0 -0
           {
               .testname = "less-than-1-height-src",
               .planesize = {256, 8},
Signature · 1 line
~Swati Sharma
#4 lore raw

PATCH 2/3 tests/kms_plane_scaling: Remove extra newline

In reply to Swati Sharma

Remove extra newline.

---
 tests/kms_plane_scaling.c | 1 -
 1 file changed, 1 deletion(-)
tests/kms_plane_scaling.c +0 -1
index 382d199e0..9737d8645 100644
@@ -872,7 +872,6 @@ static void invalid_parameter_tests(data_t *d)
 							paramtests[i].planesize[0],
 							paramtests[i].planesize[1]);
 
-
 				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
 					igt_plane_set_prop_value(plane,
 									paramtests[i].params[j].prop,
Signature · 1 line
2.25.1
#5 lore raw

Re: [igt-dev] [PATCH i-g-t 2/3] tests/kms_plane_scaling: Remove extra newline

Quoted 12 lines · Swati Sharma

Remove extra newline.

---
  tests/kms_plane_scaling.c | 1 -
  1 file changed, 1 deletion(-)
tests/kms_plane_scaling.c +0 -0
index 382d199e0..9737d8645 100644

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 877

Quoted 7 lines
tests/kms_plane_scaling.c +0 -1
@@ -872,7 +872,6 @@ static void invalid_parameter_tests(data_t *d)
  							paramtests[i].planesize[0],
  							paramtests[i].planesize[1]);
 
-
  				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
  					igt_plane_set_prop_value(plane,
  									paramtests[i].params[j].prop,

While doing these fixes you could also fix that indentation on this igt_plane_set_prop_value(..) with those following lines having parameters.

#6 lore raw

Re: [igt-dev] [PATCH i-g-t 2/3] tests/kms_plane_scaling: Remove extra newline

Quoted 8 lines · Juha-Pekka Heikkila
Quoted 7 lines · Swati Sharma

Remove extra newline.

---
  tests/kms_plane_scaling.c | 1 -

  1 file changed, 1 deletion(-)
Quoted 13 lines

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 876

Quoted 11 lines
tests/kms_plane_scaling.c +0 -1
index 382d199e0..9737d8645 100644
@@ -872,7 +872,6 @@ static void invalid_parameter_tests(data_t *d)
                               paramtests[i].planesize[0],
                               paramtests[i].planesize[1]);
-
                   for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
                       igt_plane_set_prop_value(plane,
                                       paramtests[i].params[j].prop,

While doing these fixes you could also fix that indentation on this igt_plane_set_prop_value(..) with those following lines having parameters.

Done. Sent the new series with fixes https://patchwork.freedesktop.org/series/114059/

Quoted 1 line
Signature · 1 line
~Swati Sharma
#7 lore raw

PATCH 3/3 tests/kms_plane_scaling: Add test to validate max source size

In reply to Swati Sharma

i915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).

On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width supported is 5120.

---
 tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +94 -0
index 9737d8645..ae917b202 100644
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d)
 	}
 }
 
+/*
+ *	Max source/destination width/height
+ *	for i915 driver.
+ *
+ *	DISPLAY_VER < 11
+ *		max_src_w = 4096
+ *		max_src_h = 4096
+ *		max_dst_w = 4096
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 11
+ *		max_src_w = 5120
+ *		max_src_h = 4096
+ *		max_dst_w = 5120
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 12-13
+ *		max_src_w = 5120
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ *
+ *	DISPLAY_VER = 14
+ *		max_src_w = 4096
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ */
+
+static void i915_max_source_size_test(data_t *d)
+{
+	enum pipe pipe = PIPE_A;
+	igt_output_t *output;
+	igt_fb_t fb;
+	igt_plane_t *plane;
+	int rval;
+
+	static const struct invalid_paramtests paramtests[1] = {
+		{
+			.testname = "max-src-size",
+			.planesize = {3840, 2400},
+			.params = {{~0}}
+		},
+	};
+
+	igt_fixture {
+		output = igt_get_single_output_for_pipe(&d->display, pipe);
+		igt_require(output);
+
+		igt_output_set_pipe(output, pipe);
+		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_fb(d->drm_fd, 5120, 4320,
+			DRM_FORMAT_XRGB8888,
+			DRM_FORMAT_MOD_NONE,
+			&fb);
+	}
+
+	igt_describe("test for validating max source size.");
+	igt_subtest_with_dynamic("i915-max-source-size") {
+		for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) {
+			igt_dynamic(paramtests[i].testname) {
+				igt_plane_set_position(plane, 0, 0);
+				igt_plane_set_fb(plane, &fb);
+				igt_plane_set_size(plane,
+							paramtests[i].planesize[0],
+							paramtests[i].planesize[1]);
+
+				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
+					igt_plane_set_prop_value(plane,
+								 paramtests[i].params[j].prop,
+								 paramtests[i].params[j].value);
+
+				rval = igt_display_try_commit2(&d->display, COMMIT_ATOMIC);
+
+				if (intel_display_ver(d->devid) < 11 || intel_display_ver(d->devid) >= 14)
+					igt_assert(rval == -EINVAL || rval == -ERANGE);
+				else
+					igt_assert_eq(rval, 0);
+			}
+		}
+	}
+
+	igt_fixture {
+		igt_remove_fb(d->drm_fd, &fb);
+		igt_output_set_pipe(output, PIPE_NONE);
+	}
+}
+
 static int opt_handler(int opt, int opt_index, void *_data)
 {
 	data_t *data = _data;
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
 
 	invalid_parameter_tests(&data);
 
+	igt_fixture
+		igt_require_f(data.devid, "This test is valid only for i915 devices.\n");
+
+	i915_max_source_size_test(&data);
+
 	igt_fixture {
 		igt_display_fini(&data.display);
 		close(data.drm_fd);
Signature · 1 line
2.25.1
#8 lore raw

Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size

Quoted 43 lines · Swati Sharma

i915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).

On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width supported is 5120.

---
  tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++
  1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +17 -0
index 9737d8645..ae917b202 100644
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d)
  	}
  }
 
+/*
+ *	Max source/destination width/height
+ *	for i915 driver.
+ *
+ *	DISPLAY_VER < 11
+ *		max_src_w = 4096
+ *		max_src_h = 4096
+ *		max_dst_w = 4096
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 11
+ *		max_src_w = 5120
+ *		max_src_h = 4096
+ *		max_dst_w = 5120
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 12-13

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 919

Quoted 10 lines
tests/kms_plane_scaling.c +10 -0
+ *		max_src_w = 5120
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ *
+ *	DISPLAY_VER = 14
+ *		max_src_w = 4096
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192

I think here could be added comment these numbers are coming from drivers/gpu/drm/i915/display/skl_scaler.c in kernel sources

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 930

Quoted 11 lines
tests/kms_plane_scaling.c +11 -0
+ */
+
+static void i915_max_source_size_test(data_t *d)
+{
+	enum pipe pipe = PIPE_A;
+	igt_output_t *output;
+	igt_fb_t fb;
+	igt_plane_t *plane;
+	int rval;
+
+	static const struct invalid_paramtests paramtests[1] = {

"static const struct invalid_paramtests paramtests[]" would be better here, ie. not declaring here how long is the list of tests

Quoted 8 lines
tests/kms_plane_scaling.c +8 -0
+		{
+			.testname = "max-src-size",
+			.planesize = {3840, 2400},
+			.params = {{~0}}
+		},
+	};
+
+	igt_fixture {

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 948

Quoted 10 lines
tests/kms_plane_scaling.c +10 -0
+		output = igt_get_single_output_for_pipe(&d->display, pipe);
+		igt_require(output);
+
+		igt_output_set_pipe(output, pipe);
+		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_fb(d->drm_fd, 5120, 4320,
+			DRM_FORMAT_XRGB8888,
+			DRM_FORMAT_MOD_NONE,
+			&fb);

above indentation is off on those lines with parameters.

Quoted 37 lines
tests/kms_plane_scaling.c +33 -0
+	}
+
+	igt_describe("test for validating max source size.");
+	igt_subtest_with_dynamic("i915-max-source-size") {
+		for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) {
+			igt_dynamic(paramtests[i].testname) {
+				igt_plane_set_position(plane, 0, 0);
+				igt_plane_set_fb(plane, &fb);
+				igt_plane_set_size(plane,
+							paramtests[i].planesize[0],
+							paramtests[i].planesize[1]);
+
+				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
+					igt_plane_set_prop_value(plane,
+								 paramtests[i].params[j].prop,
+								 paramtests[i].params[j].value);
+
+				rval = igt_display_try_commit2(&d->display, COMMIT_ATOMIC);
+
+				if (intel_display_ver(d->devid) < 11 || intel_display_ver(d->devid) >= 14)
+					igt_assert(rval == -EINVAL || rval == -ERANGE);
+				else
+					igt_assert_eq(rval, 0);
+			}
+		}
+	}
+
+	igt_fixture {
+		igt_remove_fb(d->drm_fd, &fb);
+		igt_output_set_pipe(output, PIPE_NONE);
+	}
+}
+
  static int opt_handler(int opt, int opt_index, void *_data)
  {
  	data_t *data = _data;

tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1151

Quoted 8 lines
tests/kms_plane_scaling.c +5 -0
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
 
  	invalid_parameter_tests(&data);
 
+	igt_fixture
+		igt_require_f(data.devid, "This test is valid only for i915 devices.\n");
+
+	i915_max_source_size_test(&data);
+

These above changes I think could be wrapped inside igt_subtest_group so that i915 requirement doesn't become inherited if someone come add something here after this test.

Quoted 3 lines
tests/kms_plane_scaling.c +0 -0
  	igt_fixture {
  		igt_display_fini(&data.display);
  		close(data.drm_fd);
#9 lore raw

Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size

Quoted 134 lines · Juha-Pekka Heikkila
Quoted 42 lines · Swati Sharma

i915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).

On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width  supported is 5120.

---
  tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++

  1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +17 -0
index 9737d8645..ae917b202 100644
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d)
       }
   }
+/*
+ *    Max source/destination width/height
+ *    for i915 driver.
+ *
+ *    DISPLAY_VER < 11
+ *        max_src_w = 4096
+ *        max_src_h = 4096
+ *        max_dst_w = 4096
+ *        max_dst_h = 4096
+ *
+ *    DISPLAY_VER = 11
+ *        max_src_w = 5120
+ *        max_src_h = 4096
+ *        max_dst_w = 5120
+ *        max_dst_h = 4096
+ *
+ *    DISPLAY_VER = 12-13

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 918

Quoted 10 lines
tests/kms_plane_scaling.c +10 -0
+ *        max_src_w = 5120
+ *        max_src_h = 8192
+ *        max_dst_w = 8192
+ *        max_dst_h = 8192
+ *
+ *    DISPLAY_VER = 14
+ *        max_src_w = 4096
+ *        max_src_h = 8192
+ *        max_dst_w = 8192
+ *        max_dst_h = 8192

I think here could be added comment these numbers are coming from drivers/gpu/drm/i915/display/skl_scaler.c in kernel sources

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 930

Quoted 11 lines
tests/kms_plane_scaling.c +11 -0
+ */
+
+static void i915_max_source_size_test(data_t *d)
+{
+    enum pipe pipe = PIPE_A;
+    igt_output_t *output;
+    igt_fb_t fb;
+    igt_plane_t *plane;
+    int rval;
+
+    static const struct invalid_paramtests paramtests[1] = {

"static const struct invalid_paramtests paramtests[]" would be better here, ie. not declaring here how long is the list of tests

Quoted 9 lines
tests/kms_plane_scaling.c +9 -0
+        {
+            .testname = "max-src-size",
+            .planesize = {3840, 2400},
+            .params = {{~0}}
+        },
+    };
+
+    igt_fixture {
+        output = igt_get_single_output_for_pipe(&d->display, pipe);

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 948

Quoted 10 lines
tests/kms_plane_scaling.c +9 -0
+        igt_require(output);
+
+        igt_output_set_pipe(output, pipe);
+        plane = igt_output_get_plane_type(output, 
 DRM_PLANE_TYPE_PRIMARY);
+
+        igt_create_fb(d->drm_fd, 5120, 4320,
+            DRM_FORMAT_XRGB8888,
+            DRM_FORMAT_MOD_NONE,
+            &fb);

above indentation is off on those lines with parameters.

Quoted 42 lines
tests/kms_plane_scaling.c +33 -0
+    }
+
+    igt_describe("test for validating max source size.");
+    igt_subtest_with_dynamic("i915-max-source-size") {
+        for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) {
+            igt_dynamic(paramtests[i].testname) {
+                igt_plane_set_position(plane, 0, 0);
+                igt_plane_set_fb(plane, &fb);
+                igt_plane_set_size(plane,
+                            paramtests[i].planesize[0],
+                            paramtests[i].planesize[1]);
+
+                for (uint32_t j = 0; paramtests[i].params[j].prop != 
 ~0; j++)
+                    igt_plane_set_prop_value(plane,
+                                 paramtests[i].params[j].prop,
+                                 paramtests[i].params[j].value);
+
+                rval = igt_display_try_commit2(&d->display, 
 COMMIT_ATOMIC);
+
+                if (intel_display_ver(d->devid) < 11 || 
 intel_display_ver(d->devid) >= 14)
+                    igt_assert(rval == -EINVAL || rval == -ERANGE);
+                else
+                    igt_assert_eq(rval, 0);
+            }
+        }
+    }
+
+    igt_fixture {
+        igt_remove_fb(d->drm_fd, &fb);
+        igt_output_set_pipe(output, PIPE_NONE);
+    }
+}
+

  static int opt_handler(int opt, int opt_index, void *_data) {
      data_t *data = _data;

tests/kms_plane_scaling.c +0 -0
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, 
 opt_handler, &data)
       invalid_parameter_tests(&data);
Quoted 8 lines

tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1151

Quoted 6 lines
tests/kms_plane_scaling.c +5 -0
+    igt_fixture
+        igt_require_f(data.devid, "This test is valid only for i915 
 devices.\n");
+
+    i915_max_source_size_test(&data);
+

These above changes I think could be wrapped inside igt_subtest_group so that i915 requirement doesn't become inherited if someone come add something here after this test.

Done. Sent new series with the fixes https://patchwork.freedesktop.org/series/114059/

Quoted 5 lines
Quoted 4 lines
tests/kms_plane_scaling.c +0 -0
       igt_fixture {
           igt_display_fini(&data.display);
           close(data.drm_fd);
Signature · 1 line
~Swati Sharma
#10 lore raw

Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size

In reply to Swati Sharma

Hi Swati,

Quoted 6 lines · Swati Sharma

i915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).

Quoted 8 lines

On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width supported is 5120.

+cc Juha-Pekka

Quoted 50 lines
---
 tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +38 -0
index 9737d8645..ae917b202 100644
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d)
 	}
 }
 
+/*
+ *	Max source/destination width/height
+ *	for i915 driver.
+ *
+ *	DISPLAY_VER < 11
+ *		max_src_w = 4096
+ *		max_src_h = 4096
+ *		max_dst_w = 4096
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 11
+ *		max_src_w = 5120
+ *		max_src_h = 4096
+ *		max_dst_w = 5120
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 12-13
+ *		max_src_w = 5120
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ *
+ *	DISPLAY_VER = 14
+ *		max_src_w = 4096
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ */
+
+static void i915_max_source_size_test(data_t *d)
+{
+	enum pipe pipe = PIPE_A;
+	igt_output_t *output;
+	igt_fb_t fb;
+	igt_plane_t *plane;
+	int rval;
+
+	static const struct invalid_paramtests paramtests[1] = {

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 940

Quoted 10 lines
tests/kms_plane_scaling.c +10 -0
+		{
+			.testname = "max-src-size",
+			.planesize = {3840, 2400},
+			.params = {{~0}}
+		},
+	};
+
+	igt_fixture {
+		output = igt_get_single_output_for_pipe(&d->display, pipe);
+		igt_require(output);

--------------- ^
You are not in subtest.

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 949

Quoted 9 lines
tests/kms_plane_scaling.c +9 -0
+
+		igt_output_set_pipe(output, pipe);
+		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_fb(d->drm_fd, 5120, 4320,
+			DRM_FORMAT_XRGB8888,
+			DRM_FORMAT_MOD_NONE,
+			&fb);
+	}

Is this fixture only for i915 ? It looks generic, even if igt_create_fb will fail (but you need to remember fb_id here).

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 952

Quoted 3 lines
tests/kms_plane_scaling.c +3 -0
+
+	igt_describe("test for validating max source size.");
+	igt_subtest_with_dynamic("i915-max-source-size") {

Here you can put igt_require for i915 driver and also require for fb_id != 0.

Quoted 33 lines
tests/kms_plane_scaling.c +29 -0
+		for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) {
+			igt_dynamic(paramtests[i].testname) {
+				igt_plane_set_position(plane, 0, 0);
+				igt_plane_set_fb(plane, &fb);
+				igt_plane_set_size(plane,
+							paramtests[i].planesize[0],
+							paramtests[i].planesize[1]);
+
+				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
+					igt_plane_set_prop_value(plane,
+								 paramtests[i].params[j].prop,
+								 paramtests[i].params[j].value);
+
+				rval = igt_display_try_commit2(&d->display, COMMIT_ATOMIC);
+
+				if (intel_display_ver(d->devid) < 11 || intel_display_ver(d->devid) >= 14)
+					igt_assert(rval == -EINVAL || rval == -ERANGE);
+				else
+					igt_assert_eq(rval, 0);
+			}
+		}
+	}
+
+	igt_fixture {
+		igt_remove_fb(d->drm_fd, &fb);
+		igt_output_set_pipe(output, PIPE_NONE);
+	}
+}
+
 static int opt_handler(int opt, int opt_index, void *_data)
 {
 	data_t *data = _data;

tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1148

Quoted 5 lines
tests/kms_plane_scaling.c +2 -0
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
 
 	invalid_parameter_tests(&data);
 
+	igt_fixture
+		igt_require_f(data.devid, "This test is valid only for i915 devices.\n");

Do not do this, use igt_require_f inside (dynamic_)subtest.

Regards,
Kamil

Quoted 9 lines
tests/kms_plane_scaling.c +3 -0
+
+	i915_max_source_size_test(&data);
+
 	igt_fixture {
 		igt_display_fini(&data.display);
 		close(data.drm_fd);
Signature · 1 line
2.25.1
#11 lore raw

Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size

Quoted 83 lines · Kamil Konieczny

Hi Swati,

Quoted 6 lines · Swati Sharma

i915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).

Quoted 8 lines

On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width supported is 5120.

+cc Juha-Pekka

Quoted 50 lines
---
  tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++
  1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +38 -0
index 9737d8645..ae917b202 100644
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d)
  	}
  }
 
+/*
+ *	Max source/destination width/height
+ *	for i915 driver.
+ *
+ *	DISPLAY_VER < 11
+ *		max_src_w = 4096
+ *		max_src_h = 4096
+ *		max_dst_w = 4096
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 11
+ *		max_src_w = 5120
+ *		max_src_h = 4096
+ *		max_dst_w = 5120
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 12-13
+ *		max_src_w = 5120
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ *
+ *	DISPLAY_VER = 14
+ *		max_src_w = 4096
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ */
+
+static void i915_max_source_size_test(data_t *d)
+{
+	enum pipe pipe = PIPE_A;
+	igt_output_t *output;
+	igt_fb_t fb;
+	igt_plane_t *plane;
+	int rval;
+
+	static const struct invalid_paramtests paramtests[1] = {

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 940

Quoted 10 lines
tests/kms_plane_scaling.c +10 -0
+		{
+			.testname = "max-src-size",
+			.planesize = {3840, 2400},
+			.params = {{~0}}
+		},
+	};
+
+	igt_fixture {
+		output = igt_get_single_output_for_pipe(&d->display, pipe);
+		igt_require(output);

--------------- ^
You are not in subtest.

Quoted 12 lines

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 949

Quoted 9 lines
tests/kms_plane_scaling.c +9 -0
+
+		igt_output_set_pipe(output, pipe);
+		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_fb(d->drm_fd, 5120, 4320,
+			DRM_FORMAT_XRGB8888,
+			DRM_FORMAT_MOD_NONE,
+			&fb);
+	}

Is this fixture only for i915 ? It looks generic, even if igt_create_fb will fail (but you need to remember fb_id here).

just quickly drive by commenting.. these tests on this patch are for i915, hence above fixture is for tests below.

Quoted 8 lines

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 952

Quoted 4 lines
tests/kms_plane_scaling.c +3 -0
+
+	igt_describe("test for validating max source size.");
+	igt_subtest_with_dynamic("i915-max-source-size") {

Here you can put igt_require for i915 driver and also require for fb_id != 0.

If igt_create_fb will fail it will assert out at igt_create_fb_with_bo_size and there's no point in checking for fb_id being zero.

Quoted 34 lines
Quoted 34 lines
tests/kms_plane_scaling.c +29 -0
+		for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) {
+			igt_dynamic(paramtests[i].testname) {
+				igt_plane_set_position(plane, 0, 0);
+				igt_plane_set_fb(plane, &fb);
+				igt_plane_set_size(plane,
+							paramtests[i].planesize[0],
+							paramtests[i].planesize[1]);
+
+				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
+					igt_plane_set_prop_value(plane,
+								 paramtests[i].params[j].prop,
+								 paramtests[i].params[j].value);
+
+				rval = igt_display_try_commit2(&d->display, COMMIT_ATOMIC);
+
+				if (intel_display_ver(d->devid) < 11 || intel_display_ver(d->devid) >= 14)
+					igt_assert(rval == -EINVAL || rval == -ERANGE);
+				else
+					igt_assert_eq(rval, 0);
+			}
+		}
+	}
+
+	igt_fixture {
+		igt_remove_fb(d->drm_fd, &fb);
+		igt_output_set_pipe(output, PIPE_NONE);
+	}
+}
+
  static int opt_handler(int opt, int opt_index, void *_data)
  {
  	data_t *data = _data;
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
 
Quoted 6 lines

tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1148

Quoted 4 lines
tests/kms_plane_scaling.c +2 -0
  	invalid_parameter_tests(&data);
 
+	igt_fixture
+		igt_require_f(data.devid, "This test is valid only for i915 devices.\n");

Do not do this, use igt_require_f inside (dynamic_)subtest.

Imo igt_subtest_group is what's needed to be put around these, fixture is meant for this checking when anything inside will depend on something. Putting igt_require_f inside subtest will just waste test execution time when on platform where required conditions are not met. You can see same pattern used on other tests, simplest example coming to my mind at kms_addfb_basic.

/Juha-Pekka

Quoted 10 lines
Quoted 10 lines
tests/kms_plane_scaling.c +3 -0
+
+	i915_max_source_size_test(&data);
+
  	igt_fixture {
  		igt_display_fini(&data.display);
  		close(data.drm_fd);
Signature · 1 line
2.25.1
#12 lore raw

Re: [igt-dev] [PATCH i-g-t 3/3] tests/kms_plane_scaling: Add test to validate max source size

In reply to Kamil Konieczny

Hi Kamil,

I have floated next rev https://patchwork.freedesktop.org/series/114059/
addressing review comments from JP.

igt_require() inside dynamic_subtest() is not recommended. All these conditions should be checked before executing the test. In the past, we have seen CRASHES if such conditions are put inside the subtest.

Quoted 156 lines · Kamil Konieczny

Hi Swati,

Quoted 6 lines · Swati Sharma

i915 specific test is added to validate max source size. This test is expected to return -EINVAL for platforms where we have max source width 4096 whereas it will pass on platforms having max source width 5120. We have created fb of size 5120x4320 (=size of source) and downscaled to 3840x2400(=size of dest).

Quoted 8 lines

On MTL(disp_ver=14), in dmesg we can see "[drm:skl_update_scaler [i915]] scaler_user index 0.0: src 5120x4320 dst 3840x2400 size is out of scaler range." since max source width supported is 4096.
whereas same test will pass on ADLP(display_ver=13) since max source width supported is 5120.

+cc Juha-Pekka

Quoted 50 lines
---
  tests/kms_plane_scaling.c | 94 +++++++++++++++++++++++++++++++++++++++
  1 file changed, 94 insertions(+)
tests/kms_plane_scaling.c +38 -0
index 9737d8645..ae917b202 100644
@@ -890,6 +890,95 @@ static void invalid_parameter_tests(data_t *d)
  	}
  }
 
+/*
+ *	Max source/destination width/height
+ *	for i915 driver.
+ *
+ *	DISPLAY_VER < 11
+ *		max_src_w = 4096
+ *		max_src_h = 4096
+ *		max_dst_w = 4096
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 11
+ *		max_src_w = 5120
+ *		max_src_h = 4096
+ *		max_dst_w = 5120
+ *		max_dst_h = 4096
+ *
+ *	DISPLAY_VER = 12-13
+ *		max_src_w = 5120
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ *
+ *	DISPLAY_VER = 14
+ *		max_src_w = 4096
+ *		max_src_h = 8192
+ *		max_dst_w = 8192
+ *		max_dst_h = 8192
+ */
+
+static void i915_max_source_size_test(data_t *d)
+{
+	enum pipe pipe = PIPE_A;
+	igt_output_t *output;
+	igt_fb_t fb;
+	igt_plane_t *plane;
+	int rval;
+
+	static const struct invalid_paramtests paramtests[1] = {

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 940

Quoted 10 lines
tests/kms_plane_scaling.c +10 -0
+		{
+			.testname = "max-src-size",
+			.planesize = {3840, 2400},
+			.params = {{~0}}
+		},
+	};
+
+	igt_fixture {
+		output = igt_get_single_output_for_pipe(&d->display, pipe);
+		igt_require(output);

--------------- ^
You are not in subtest.

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 949

Quoted 9 lines
tests/kms_plane_scaling.c +9 -0
+
+		igt_output_set_pipe(output, pipe);
+		plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_fb(d->drm_fd, 5120, 4320,
+			DRM_FORMAT_XRGB8888,
+			DRM_FORMAT_MOD_NONE,
+			&fb);
+	}

Is this fixture only for i915 ? It looks generic, even if igt_create_fb will fail (but you need to remember fb_id here).

tests/kms_plane_scaling.c static void invalid_parameter_tests(data_t *d) · line 952

Quoted 3 lines
tests/kms_plane_scaling.c +3 -0
+
+	igt_describe("test for validating max source size.");
+	igt_subtest_with_dynamic("i915-max-source-size") {

Here you can put igt_require for i915 driver and also require for fb_id != 0.

Quoted 33 lines
tests/kms_plane_scaling.c +29 -0
+		for (uint32_t i = 0; i < ARRAY_SIZE(paramtests); i++) {
+			igt_dynamic(paramtests[i].testname) {
+				igt_plane_set_position(plane, 0, 0);
+				igt_plane_set_fb(plane, &fb);
+				igt_plane_set_size(plane,
+							paramtests[i].planesize[0],
+							paramtests[i].planesize[1]);
+
+				for (uint32_t j = 0; paramtests[i].params[j].prop != ~0; j++)
+					igt_plane_set_prop_value(plane,
+								 paramtests[i].params[j].prop,
+								 paramtests[i].params[j].value);
+
+				rval = igt_display_try_commit2(&d->display, COMMIT_ATOMIC);
+
+				if (intel_display_ver(d->devid) < 11 || intel_display_ver(d->devid) >= 14)
+					igt_assert(rval == -EINVAL || rval == -ERANGE);
+				else
+					igt_assert_eq(rval, 0);
+			}
+		}
+	}
+
+	igt_fixture {
+		igt_remove_fb(d->drm_fd, &fb);
+		igt_output_set_pipe(output, PIPE_NONE);
+	}
+}
+
  static int opt_handler(int opt, int opt_index, void *_data)
  {
  	data_t *data = _data;

tests/kms_plane_scaling.c igt_main_args("", long_opts, help_str, opt_handler, &data) · line 1148

Quoted 5 lines
tests/kms_plane_scaling.c +2 -0
@@ -1055,6 +1144,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
 
  	invalid_parameter_tests(&data);
 
+	igt_fixture
+		igt_require_f(data.devid, "This test is valid only for i915 devices.\n");

Do not do this, use igt_require_f inside (dynamic_)subtest.

Regards,
Kamil

Quoted 9 lines
tests/kms_plane_scaling.c +3 -0
+
+	i915_max_source_size_test(&data);
+
  	igt_fixture {
  		igt_display_fini(&data.display);
  		close(data.drm_fd);
Signature · 1 line
2.25.1
Signature · 1 line
~Swati Sharma
#13 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Validate max source size (rev2)

In reply to Swati Sharma
== Series Details ==

== Series Details ==

Series: Validate max source size (rev2)
URL : https://patchwork.freedesktop.org/series/114059/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12744 -> IGTPW_8503
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html

Participating hosts (40 -> 39)
------------------------------

Additional (1): fi-kbl-soraka
Missing (2): bat-kbl-2 fi-snb-2520m

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_8503:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@i915_suspend@basic-s2idle-without-i915:
- {bat-rpls-1}: [PASS][1] -> [ABORT][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/bat-rpls-1/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/bat-rpls-1/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_8503 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_gttfill@basic:
- fi-kbl-soraka: NOTRUN -> [SKIP][3] ([fdo#109271]) +15 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@[email protected]

* igt@gem_exec_suspend@basic-s3@smem:
- fi-rkl-11600: [PASS][4] -> [FAIL][5] ([fdo#103375]) +1 similar issue
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/fi-rkl-11600/igt@gem_exec_suspend@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-rkl-11600/igt@gem_exec_suspend@[email protected]

* igt@gem_huc_copy@huc-copy:
- fi-kbl-soraka: NOTRUN -> [SKIP][6] ([fdo#109271] / [i915#2190])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@[email protected]

* igt@gem_lmem_swapping@basic:
- fi-kbl-soraka: NOTRUN -> [SKIP][7] ([fdo#109271] / [i915#4613]) +3 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@[email protected]

* igt@i915_selftest@live@execlists:
- fi-kbl-soraka: NOTRUN -> [INCOMPLETE][8] ([i915#7913])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@gt_pm:
- fi-kbl-soraka: NOTRUN -> [DMESG-FAIL][9] ([i915#1886])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-kbl-soraka/igt@i915_selftest@live@gt_pm.html

#### Possible fixes ####

* igt@i915_selftest@live@hangcheck:
- fi-skl-guc: [DMESG-WARN][10] ([i915#8073]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/fi-skl-guc/igt@i915_selftest@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/fi-skl-guc/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@mman:
- {bat-rpls-1}: [TIMEOUT][12] ([i915#6794]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/bat-rpls-1/igt@i915_selftest@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/bat-rpls-1/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@reset:
- {bat-rpls-2}: [ABORT][14] ([i915#4983]) -> [PASS][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/bat-rpls-2/igt@i915_selftest@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/bat-rpls-2/igt@i915_selftest@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1886]: https://gitlab.freedesktop.org/drm/intel/issues/1886
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#6794]: https://gitlab.freedesktop.org/drm/intel/issues/6794
[i915#6997]: https://gitlab.freedesktop.org/drm/intel/issues/6997
[i915#7913]: https://gitlab.freedesktop.org/drm/intel/issues/7913
[i915#8073]: https://gitlab.freedesktop.org/drm/intel/issues/8073

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7160 -> IGTPW_8503

CI-20190529: 20190529
CI_DRM_12744: 2e4cac06e4de01a35626de676b9eeb474ae7ab5d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8503: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
IGT_7160: 45da871dd2684227e93a2fc002b87dfc58bd5fd9 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

Testlist changes
----------------

+igt@kms_plane_scaling@i915-max-source-size -igt@v3d/v3d_job_submission@array-job-submission -igt@v3d/v3d_job_submission@multiple-singlesync-to-multisync -igt@v3d/v3d_job_submission@threaded-job-submission -igt@v3d/v3d_submit_csd@bad-bo -igt@v3d/v3d_submit_csd@bad-extension -igt@v3d/v3d_submit_csd@bad-flag -igt@v3d/v3d_submit_csd@bad-in-sync -igt@v3d/v3d_submit_csd@bad-multisync-extension -igt@v3d/v3d_submit_csd@bad-multisync-in-sync -igt@v3d/v3d_submit_csd@bad-multisync-out-sync -igt@v3d/v3d_submit_csd@bad-multisync-pad -igt@v3d/v3d_submit_csd@bad-pad -igt@v3d/v3d_submit_csd@bad-perfmon -igt@v3d/v3d_submit_csd@job-perfmon -igt@v3d/v3d_submit_csd@multiple-job-submission -igt@v3d/v3d_submit_csd@multisync-out-syncs -igt@v3d/v3d_submit_csd@multi-and-single-sync -igt@v3d/v3d_submit_csd@single-in-sync -igt@v3d/v3d_submit_csd@single-out-sync -igt@v3d/v3d_submit_csd@valid-multisync-submission -igt@v3d/v3d_submit_csd@valid-submission

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html

#14 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for Validate max source size (rev2)

In reply to Swati Sharma
== Series Details ==

== Series Details ==

Series: Validate max source size (rev2)
URL : https://patchwork.freedesktop.org/series/114059/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12744_full -> IGTPW_8503_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html

Participating hosts (10 -> 11)
------------------------------

Additional (1): shard-rkl0

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_8503_full:

### IGT changes ###

#### Possible regressions ####

* {igt@kms_plane_scaling@i915-max-source-size@max-src-size} (NEW):
- shard-apl: NOTRUN -> [FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@kms_plane_scaling@[email protected]
- shard-glk: NOTRUN -> [FAIL][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk6/igt@kms_plane_scaling@[email protected]

New tests
---------

New tests have been introduced between CI_DRM_12744_full and IGTPW_8503_full:

### New IGT tests (2) ###

* igt@kms_plane_scaling@i915-max-source-size:
- Statuses :
- Exec time: [None] s

* igt@kms_plane_scaling@i915-max-source-size@max-src-size:
- Statuses : 2 fail(s) 2 pass(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_8503_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_fair@basic-none@vecs0:
- shard-glk: [PASS][3] -> [FAIL][4] ([i915#2842])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk2/igt@gem_exec_fair@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk4/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-solo@rcs0:
- shard-apl: [PASS][5] -> [FAIL][6] ([i915#2842])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl3/igt@gem_exec_fair@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_schedule@wide@rcs0:
- shard-glk: [PASS][7] -> [FAIL][8] ([i915#6659])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk9/igt@gem_exec_schedule@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk8/igt@gem_exec_schedule@[email protected]

* igt@gem_userptr_blits@vma-merge:
- shard-apl: NOTRUN -> [FAIL][9] ([i915#3318])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@[email protected]

* igt@gen9_exec_parse@allowed-single:
- shard-apl: [PASS][10] -> [ABORT][11] ([i915#5566])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl2/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl6/igt@[email protected]

* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-vga:
- shard-snb: NOTRUN -> [SKIP][12] ([fdo#109271]) +25 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-snb6/igt@i915_pm_lpsp@[email protected]

* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible@bc-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][13] -> [FAIL][14] ([i915#79]) +1 similar issue
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk2/igt@kms_flip@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk9/igt@kms_flip@[email protected]

* igt@kms_flip@2x-plain-flip-ts-check-interruptible@ab-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][15] -> [FAIL][16] ([i915#2122])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk1/igt@kms_flip@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk3/igt@kms_flip@[email protected]

* igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-gtt:
- shard-glk: NOTRUN -> [SKIP][17] ([fdo#109271]) +7 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk4/igt@kms_frontbuffer_tracking@fbcpsr-2p-scndscrn-pri-indfb-draw-mmap-gtt.html

* igt@kms_plane_alpha_blend@alpha-transparent-fb@pipe-c-dp-1:
- shard-apl: NOTRUN -> [FAIL][18] ([i915#4573]) +1 similar issue
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl2/igt@kms_plane_alpha_blend@[email protected]

* igt@kms_plane_scaling@plane-downscale-with-rotation-factor-0-75@pipe-b-dp-1:
- shard-apl: NOTRUN -> [SKIP][19] ([fdo#109271]) +32 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl3/igt@kms_plane_scaling@[email protected]

#### Possible fixes ####

* igt@drm_fdinfo@most-busy-idle-check-all@rcs0:
- {shard-rkl}: [FAIL][20] ([i915#7742]) -> [PASS][21]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-6/igt@drm_fdinfo@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@drm_fdinfo@[email protected]

* igt@fbdev@eof:
- {shard-rkl}: [SKIP][22] ([i915#2582]) -> [PASS][23] +1 similar issue
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-3/igt@[email protected]
- {shard-tglu}: [SKIP][24] ([i915#2582]) -> [PASS][25]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-tglu-6/igt@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-tglu-4/igt@[email protected]

* igt@gem_bad_reloc@negative-reloc:
- {shard-rkl}: [SKIP][26] ([i915#3281]) -> [PASS][27] +8 similar issues
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@[email protected]

* igt@gem_ctx_exec@basic-nohangcheck:
- {shard-rkl}: [FAIL][28] ([i915#6268]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-2/igt@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-3/igt@[email protected]

* igt@gem_ctx_isolation@preservation-s3@vcs0:
- shard-apl: [ABORT][30] -> [PASS][31]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl1/igt@gem_ctx_isolation@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl2/igt@gem_ctx_isolation@[email protected]

* igt@gem_eio@in-flight-external:
- {shard-rkl}: [ABORT][32] ([i915#7811]) -> [PASS][33]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-1/igt@[email protected]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-glk: [FAIL][34] ([i915#2842]) -> [PASS][35]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk9/igt@gem_exec_fair@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_suspend@basic-s3@smem:
- {shard-rkl}: [ABORT][36] ([i915#5122]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@gem_exec_suspend@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-3/igt@gem_exec_suspend@[email protected]

* igt@gem_pread@self:
- {shard-rkl}: [SKIP][38] ([i915#3282]) -> [PASS][39] +3 similar issues
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-3/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@[email protected]

* igt@gen9_exec_parse@allowed-single:
- shard-glk: [ABORT][40] ([i915#5566]) -> [PASS][41]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-glk6/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-glk4/igt@[email protected]

* igt@gen9_exec_parse@bb-chained:
- {shard-rkl}: [SKIP][42] ([i915#2527]) -> [PASS][43] +2 similar issues
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-3/igt@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-5/igt@[email protected]

* igt@i915_pm_dc@dc9-dpms:
- shard-apl: [SKIP][44] ([fdo#109271]) -> [PASS][45]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-apl7/igt@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-apl6/igt@[email protected]

* igt@i915_pm_rpm@drm-resources-equal:
- {shard-rkl}: [SKIP][46] ([fdo#109308]) -> [PASS][47]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-5/igt@[email protected]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-indfb-fliptrack-mmap-gtt:
- {shard-tglu}: [SKIP][48] ([i915#1849]) -> [PASS][49] +2 similar issues
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-tglu-6/igt@[email protected]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-tglu-3/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- {shard-rkl}: [SKIP][50] ([i915#1849] / [i915#4098]) -> [PASS][51] +12 similar issues
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-1/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt.html
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt.html

* igt@kms_psr@sprite_plane_onoff:
- {shard-rkl}: [SKIP][52] ([i915#1072]) -> [PASS][53] +1 similar issue
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@kms_psr@sprite_plane_onoff.html
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@kms_psr@sprite_plane_onoff.html

* igt@kms_vblank@pipe-a-query-forked:
- {shard-tglu}: [SKIP][54] ([i915#1845] / [i915#7651]) -> [PASS][55] +13 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-tglu-6/igt@[email protected]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-tglu-1/igt@[email protected]

* igt@kms_vblank@pipe-a-ts-continuation-idle:
- {shard-rkl}: [SKIP][56] ([i915#1845] / [i915#4098]) -> [PASS][57] +9 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12744/shard-rkl-4/igt@[email protected]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/shard-rkl-6/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109283]: https://bugs.freedesktop.org/show_bug.cgi?id=109283
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109308]: https://bugs.freedesktop.org/show_bug.cgi?id=109308
[fdo#109312]: https://bugs.freedesktop.org/show_bug.cgi?id=109312
[fdo#109313]: https://bugs.freedesktop.org/show_bug.cgi?id=109313
[fdo#109314]: https://bugs.freedesktop.org/show_bug.cgi?id=109314
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111644]: https://bugs.freedesktop.org/show_bug.cgi?id=111644
[fdo#111656]: https://bugs.freedesktop.org/show_bug.cgi?id=111656
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1257]: https://gitlab.freedesktop.org/drm/intel/issues/1257
[i915#132]: https://gitlab.freedesktop.org/drm/intel/issues/132
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1825]: https://gitlab.freedesktop.org/drm/intel/issues/1825
[i915#1839]: https://gitlab.freedesktop.org/drm/intel/issues/1839
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#1902]: https://gitlab.freedesktop.org/drm/intel/issues/1902
[i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
[i915#2434]: https://gitlab.freedesktop.org/drm/intel/issues/2434
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2658]: https://gitlab.freedesktop.org/drm/intel/issues/2658
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
[i915#2705]: https://gitlab.freedesktop.org/drm/intel/issues/2705
[i915#280]: https://gitlab.freedesktop.org/drm/intel/issues/280
[i915#284]: https://gitlab.freedesktop.org/drm/intel/issues/284
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2846]: https://gitlab.freedesktop.org/drm/intel/issues/2846
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
[i915#3116]: https://gitlab.freedesktop.org/drm/intel/issues/3116
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/intel/issues/3291
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3299]: https://gitlab.freedesktop.org/drm/intel/issues/3299
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3318]: https://gitlab.freedesktop.org/drm/intel/issues/3318
[i915#3323]: https://gitlab.freedesktop.org/drm/intel/issues/3323
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3361]: https://gitlab.freedesktop.org/drm/intel/issues/3361
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3528]: https://gitlab.freedesktop.org/drm/intel/issues/3528
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3558]: https://gitlab.freedesktop.org/drm/intel/issues/3558
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/intel/issues/3638
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3734]: https://gitlab.freedesktop.org/drm/intel/issues/3734
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3952]: https://gitlab.freedesktop.org/drm/intel/issues/3952
[i915#3955]: https://gitlab.freedesktop.org/drm/intel/issues/3955
[i915#404]: https://gitlab.freedesktop.org/drm/intel/issues/404
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4098]: https://gitlab.freedesktop.org/drm/intel/issues/4098
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4215]: https://gitlab.freedesktop.org/drm/intel/issues/4215
[i915#426]: https://gitlab.freedesktop.org/drm/intel/issues/426
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4387]: https://gitlab.freedesktop.org/drm/intel/issues/4387
[i915#4525]: https://gitlab.freedesktop.org/drm/intel/issues/4525
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#4565]: https://gitlab.freedesktop.org/drm/intel/issues/4565
[i915#4573]: https://gitlab.freedesktop.org/drm/intel/issues/4573
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4771]: https://gitlab.freedesktop.org/drm/intel/issues/4771
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4879]: https://gitlab.freedesktop.org/drm/intel/issues/4879
[i915#4880]: https://gitlab.freedesktop.org/drm/intel/issues/4880
[i915#4885]: https://gitlab.freedesktop.org/drm/intel/issues/4885
[i915#4958]: https://gitlab.freedesktop.org/drm/intel/issues/4958
[i915#5122]: https://gitlab.freedesktop.org/drm/intel/issues/5122
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5431]: https://gitlab.freedesktop.org/drm/intel/issues/5431
[i915#5439]: https://gitlab.freedesktop.org/drm/intel/issues/5439
[i915#5461]: https://gitlab.freedesktop.org/drm/intel/issues/5461
[i915#5563]: https://gitlab.freedesktop.org/drm/intel/issues/5563
[i915#5566]: https://gitlab.freedesktop.org/drm/intel/issues/5566
[i915#5723]: https://gitlab.freedesktop.org/drm/intel/issues/5723
[i915#5784]: https://gitlab.freedesktop.org/drm/intel/issues/5784
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6117]: https://gitlab.freedesktop.org/drm/intel/issues/6117
[i915#6247]: https://gitlab.freedesktop.org/drm/intel/issues/6247
[i915#6248]: https://gitlab.freedesktop.org/drm/intel/issues/6248
[i915#6252]: https://gitlab.freedesktop.org/drm/intel/issues/6252
[i915#6258]: https://gitlab.freedesktop.org/drm/intel/issues/6258
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6335]: https://gitlab.freedesktop.org/drm/intel/issues/6335
[i915#6412]: https://gitlab.freedesktop.org/drm/intel/issues/6412
[i915#6433]: https://gitlab.freedesktop.org/drm/intel/issues/6433
[i915#6497]: https://gitlab.freedesktop.org/drm/intel/issues/6497
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6590]: https://gitlab.freedesktop.org/drm/intel/issues/6590
[i915#6659]: https://gitlab.freedesktop.org/drm/intel/issues/6659
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#6944]: https://gitlab.freedesktop.org/drm/intel/issues/6944
[i915#6953]: https://gitlab.freedesktop.org/drm/intel/issues/6953
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7128]: https://gitlab.freedesktop.org/drm/intel/issues/7128
[i915#7294]: https://gitlab.freedesktop.org/drm/intel/issues/7294
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561
[i915#7582]: https://gitlab.freedesktop.org/drm/intel/issues/7582
[i915#7651]: https://gitlab.freedesktop.org/drm/intel/issues/7651
[i915#7697]: https://gitlab.freedesktop.org/drm/intel/issues/7697
[i915#7707]: https://gitlab.freedesktop.org/drm/intel/issues/7707
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7811]: https://gitlab.freedesktop.org/drm/intel/issues/7811
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#7949]: https://gitlab.freedesktop.org/drm/intel/issues/7949
[i915#7957]: https://gitlab.freedesktop.org/drm/intel/issues/7957
[i915#7975]: https://gitlab.freedesktop.org/drm/intel/issues/7975
[i915#7984]: https://gitlab.freedesktop.org/drm/intel/issues/7984
[i915#8151]: https://gitlab.freedesktop.org/drm/intel/issues/8151
[i915#8152]: https://gitlab.freedesktop.org/drm/intel/issues/8152
[i915#8155]: https://gitlab.freedesktop.org/drm/intel/issues/8155

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7160 -> IGTPW_8503

CI-20190529: 20190529
CI_DRM_12744: 2e4cac06e4de01a35626de676b9eeb474ae7ab5d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8503: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html
IGT_7160: 45da871dd2684227e93a2fc002b87dfc58bd5fd9 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8503/index.html