4.14.310-rc1 review

Signed-off-by Al Viro <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/file.c |    1 +
 1 file changed, 1 insertion(+)

fs/file.c +1 -0

@@ -629,6 +629,7 @@ int __close_fd(struct files_struct *file
 	fdt = files_fdtable(files);
 	if (fd >= fdt->max_fds)
 		goto out_unlock;
+	fd = array_index_nospec(fd, fdt->max_fds);
 	file = fdt->fd[fd];
 	if (!file)
 		goto out_unlock;

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #2 lore raw

PATCH 2/21 x86/CPU/AMD: Disable XSAVES on AMD family 0x17

From: Andrew Cooper <[email protected]>

commit b0563468eeac88ebc70559d52a0b66efc37e4e9d upstream.

AMD Erratum 1386 is summarised as:

XSAVES Instruction May Fail to Save XMM Registers to the Provided State Save Area

This piece of accidental chronomancy causes the %xmm registers to occasionally reset back to an older value.

Ignore the XSAVES feature on all AMD Zen1/2 hardware. The XSAVEC instruction (which works fine) is equivalent on affected parts.

[ bp: Typos, move it into the F17h-specific function. ]

Reported-by Tavis Ormandy <[email protected]>

Signed-off-by Andrew Cooper <[email protected]>

Signed-off-by Borislav Petkov (AMD) <[email protected]>

Cc <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/kernel/cpu/amd.c |    9 +++++++++
 1 file changed, 9 insertions(+)

arch/x86/kernel/cpu/amd.c +9 -0

@@ -197,6 +197,15 @@ static void init_amd_k6(struct cpuinfo_x
 		return;
 	}
 #endif
+	/*
+	 * Work around Erratum 1386.  The XSAVES instruction malfunctions in
+	 * certain circumstances on Zen1/2 uarch, and not all parts have had
+	 * updated microcode at the time of writing (March 2023).
+	 *
+	 * Affected parts all have no supervisor XSAVE states, meaning that
+	 * the XSAVEC instruction (which works fine) is equivalent.
+	 */
+	clear_cpu_cap(c, X86_FEATURE_XSAVES);
 }
 
 static void init_amd_k7(struct cpuinfo_x86 *c)

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #3 lore raw

PATCH 3/21 ext4: fix RENAME_WHITEOUT handling for inline directories

From: Eric Whitney <[email protected]>

commit c9f62c8b2dbf7240536c0cc9a4529397bb8bf38e upstream.

A significant number of xfstests can cause ext4 to log one or more warning messages when they are run on a test file system where the inline_data feature has been enabled. An example:

"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."

The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068, 070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585, 589, 626, 631, and 650.

In this situation, the warning message indicates a bug in the code that performs the RENAME_WHITEOUT operation on a directory entry that has been stored inline. It doesn't detect that the directory is stored inline, and incorrectly attempts to compute a dirent block checksum on the whiteout inode when creating it. This attempt fails as a result of the integrity checking in get_dirent_tail (usually due to a failure to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message is then emitted.

Fix this by simply collecting the inlined data state at the time the search for the source directory entry is performed. Existing code handles the rest, and this is sufficient to eliminate all spurious warning messages produced by the tests above. Go one step further and do the same in the code that resets the source directory entry in the event of failure. The inlined state should be present in the "old" struct, but given the possibility of a race there's no harm in taking a conservative approach and getting that information again since the directory entry is being reread anyway.

Fixes b7ff91fd030d ("ext4: find old entry again if failed to rename whiteout")

Signed-off-by Eric Whitney <[email protected]>

Reviewed-by Jan Kara <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/ext4/namei.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

fs/ext4/namei.c +7 -6

@@ -1425,11 +1425,10 @@ static struct buffer_head * ext4_find_en
 		int has_inline_data = 1;
 		ret = ext4_find_inline_entry(dir, &fname, res_dir,
 					     &has_inline_data);
-		if (has_inline_data) {
-			if (inlined)
-				*inlined = 1;
+		if (inlined)
+			*inlined = has_inline_data;
+		if (has_inline_data)
 			goto cleanup_and_exit;
-		}
 	}
 
 	if ((namelen <= 2) && (name[0] == '.') &&

@@ -3520,7 +3519,8 @@ static void ext4_resetent(handle_t *hand
 	 * so the old->de may no longer valid and need to find it again
 	 * before reset old inode info.
 	 */
-	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de, NULL);
+	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de,
+				 &old.inlined);
 	if (IS_ERR(old.bh))
 		retval = PTR_ERR(old.bh);
 	if (!old.bh)

@@ -3688,7 +3688,8 @@ static int ext4_rename(struct inode *old
 			return retval;
 	}
 
-	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de, NULL);
+	old.bh = ext4_find_entry(old.dir, &old.dentry->d_name, &old.de,
+				 &old.inlined);
 	if (IS_ERR(old.bh))
 		return PTR_ERR(old.bh);
 	/*

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #4 lore raw

PATCH 4/21 ext4: fix another off-by-one fsmap error on 1k block filesystems

Link https://syzkaller.appspot.com/bug?id=79d5768e9bfe362911ac1a5057a36fc6b5c30002

From: Darrick J. Wong <[email protected]>

commit c993799baf9c5861f8df91beb80e1611b12efcbd upstream.

Apparently syzbot figured out that issuing this FSMAP call:

struct fsmap_head cmd = {
	.fmh_count	= ...;
	.fmh_keys	= {
		{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
		{ .fmr_device = /* ext4 dev */, .fmr_physical = 0, },
	},

...
};
ret = ioctl(fd, FS_IOC_GETFSMAP, &cmd);

Produces this crash if the underlying filesystem is a 1k-block ext4 filesystem:

kernel BUG at fs/ext4/ext4.h:3331!
invalid opcode: 0000 [#1] PREEMPT SMP

CPU: 3 PID: 3227965 Comm: xfs_io Tainted: G        W  O       6.2.0-rc8-achx
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:ext4_mb_load_buddy_gfp+0x47c/0x570 [ext4]
RSP: 0018:ffffc90007c03998 EFLAGS: 00010246
RAX: ffff888004978000 RBX: ffffc90007c03a20 RCX: ffff888041618000
RDX: 0000000000000000 RSI: 00000000000005a4 RDI: ffffffffa0c99b11
RBP: ffff888012330000 R08: ffffffffa0c2b7d0 R09: 0000000000000400
R10: ffffc90007c03950 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000ffffffff R14: 0000000000000c40 R15: ffff88802678c398
FS:  00007fdf2020c880(0000) GS:ffff88807e100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd318a5fe8 CR3: 000000007f80f001 CR4: 00000000001706e0
Call Trace:
 <TASK>
 ext4_mballoc_query_range+0x4b/0x210 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 ext4_getfsmap_datadev+0x713/0x890 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 ext4_getfsmap+0x2b7/0x330 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 ext4_ioc_getfsmap+0x153/0x2b0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 __ext4_ioctl+0x2a7/0x17e0 [ext4 dfa189daddffe8fecd3cdfd00564e0f265a8ab80]
 __x64_sys_ioctl+0x82/0xa0
 do_syscall_64+0x2b/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fdf20558aff
RSP: 002b:00007ffd318a9e30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000000200c0 RCX: 00007fdf20558aff
RDX: 00007fdf1feb2010 RSI: 00000000c0c0583b RDI: 0000000000000003
RBP: 00005625c0634be0 R08: 00005625c0634c40 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdf1feb2010
R13: 00005625be70d994 R14: 0000000000000800 R15: 0000000000000000

For GETFSMAP calls, the caller selects a physical block device by writing its block number into fsmap_head.fmh_keys[01].fmr_device. To query mappings for a subrange of the device, the starting byte of the range is written to fsmap_head.fmh_keys[0].fmr_physical and the last byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.

IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd set the inputs as follows:

	fmh_keys[0] = { .fmr_device = major(8, 0), .fmr_physical = 3},
	fmh_keys[1] = { .fmr_device = major(8, 0), .fmr_physical = 14},

Which would return you whatever is mapped in the 12 bytes starting at physical offset 3.

The crash is due to insufficient range validation of keys[1] in ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of the filesystem, which means that s_first_data_block is nonzero. ext4_get_group_no_and_offset subtracts this quantity from the blocknr argument before cracking it into a group number and a block number within a group. IOWs, block group 0 spans blocks 1-8192 (1-based) instead of 0-8191 (0-based) like what happens with larger blocksizes.

The net result of this encoding is that blocknr < s_first_data_block is not a valid input to this function. The end_fsb variable is set from the keys that are copied from userspace, which means that in the above example, its value is zero. That leads to an underflow here:

	blocknr = blocknr - le32_to_cpu(es->s_first_data_block);

The division then operates on -1:

	offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
		EXT4_SB(sb)->s_cluster_bits;

Leaving an impossibly large group number (2^32-1) in blocknr. ext4_getfsmap_check_keys checked that keys[0].fmr_physical and keys[1].fmr_physical are in increasing order, but ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least s_first_data_block. This implies that we have to check it again after the adjustment, which is the piece that I forgot.

Reported-by [email protected]

Fixes 4a4956249dac ("ext4: fix off-by-one fsmap error on 1k block filesystems")

Link https://lore.kernel.org/r/Y+58NPTH7VNGgzdd@magnolia open here

Signed-off-by Darrick J. Wong <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/ext4/fsmap.c |    2 ++
 1 file changed, 2 insertions(+)

fs/ext4/fsmap.c +2 -0

@@ -499,6 +499,8 @@ static int ext4_getfsmap_datadev(struct
 		keys[0].fmr_physical = bofs;
 	if (keys[1].fmr_physical >= eofs)
 		keys[1].fmr_physical = eofs - 1;
+	if (keys[1].fmr_physical < keys[0].fmr_physical)
+		return 0;
 	start_fsb = keys[0].fmr_physical;
 	end_fsb = keys[1].fmr_physical;

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #5 lore raw

PATCH 5/21 ext4: move where set the MAY_INLINE_DATA flag is set

From: Ye Bin <[email protected]>

commit 1dcdce5919115a471bf4921a57f20050c545a236 upstream.

The only caller of ext4_find_inline_data_nolock() that needs setting of EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In ext4_write_inline_data_end() we just need to update inode->i_inline_off. Since we are going to add one more caller that does not need to set EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA out to ext4_iget_extra_inode().

Signed-off-by Ye Bin <[email protected]>

Reviewed-by Jan Kara <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/ext4/inline.c |    1 -
 fs/ext4/inode.c  |    7 ++++++-
 2 files changed, 6 insertions(+), 2 deletions(-)

fs/ext4/inline.c +0 -1

@@ -163,7 +163,6 @@ int ext4_find_inline_data_nolock(struct
 					(void *)ext4_raw_inode(&is.iloc));
 		EXT4_I(inode)->i_inline_size = EXT4_MIN_INLINE_DATA_SIZE +
 				le32_to_cpu(is.s.here->e_value_size);
-		ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
 	}
 out:
 	brelse(is.iloc.bh);

fs/ext4/inode.c +6 -1

@@ -4752,8 +4752,13 @@ static inline int ext4_iget_extra_inode(
 
 	if (EXT4_INODE_HAS_XATTR_SPACE(inode)  &&
 	    *magic == cpu_to_le32(EXT4_XATTR_MAGIC)) {
+		int err;
+
 		ext4_set_inode_state(inode, EXT4_STATE_XATTR);
-		return ext4_find_inline_data_nolock(inode);
+		err = ext4_find_inline_data_nolock(inode);
+		if (!err && ext4_has_inline_data(inode))
+			ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
+		return err;
 	} else
 		EXT4_I(inode)->i_inline_off = 0;
 	return 0;

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #6 lore raw

PATCH 6/21 ext4: fix WARNING in ext4_update_inline_data

From: Ye Bin <[email protected]>

commit 2b96b4a5d9443ca4cad58b0040be455803c05a42 upstream.

Syzbot found the following issue:
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
fscrypt: AES-256-XTS using implementation "xts-aes-aesni"

------------[ cut here ]------------
WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
Modules linked in:
CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525
RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246
RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000
RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248
RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220
R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40
R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c
FS:  0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __alloc_pages_node include/linux/gfp.h:237 [inline]
 alloc_pages_node include/linux/gfp.h:260 [inline]
 __kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113
 __do_kmalloc_node mm/slab_common.c:956 [inline]
 __kmalloc+0xfe/0x190 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 kzalloc include/linux/slab.h:720 [inline]
 ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346
 ext4_update_inline_dir fs/ext4/inline.c:1115 [inline]
 ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307
 ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385
 ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772
 ext4_create+0x36c/0x560 fs/ext4/namei.c:2817
 lookup_open fs/namei.c:3413 [inline]
 open_last_lookups fs/namei.c:3481 [inline]
 path_openat+0x12ac/0x2dd0 fs/namei.c:3711
 do_filp_open+0x264/0x4f0 fs/namei.c:3741
 do_sys_openat2+0x124/0x4e0 fs/open.c:1310
 do_sys_open fs/open.c:1326 [inline]
 __do_sys_openat fs/open.c:1342 [inline]
 __se_sys_openat fs/open.c:1337 [inline]
 __x64_sys_openat+0x243/0x290 fs/open.c:1337
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty

      ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
         ext4_xattr_shift_entries
	 ->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
  ext4_update_inline_dir
    get_max_inline_xattr_value_size
      if (EXT4_I(inode)->i_inline_off)
	entry = (struct ext4_xattr_entry *)((void *)raw_inode +
			EXT4_I(inode)->i_inline_off);
        free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
	->As entry is incorrect, then 'free' may be negative
   ext4_update_inline_data
      value = kzalloc(len, GFP_NOFS);
      -> len is unsigned int, maybe very large, then trigger warning when
         'kzalloc()'

To resolve the above issue we need to update 'i_inline_off' after 'ext4_xattr_shift_entries()'. We do not need to set EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty() already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA when it is needed may trigger a BUG_ON in ext4_writepages().

Reported-by [email protected]

Signed-off-by Ye Bin <[email protected]>

Reviewed-by Jan Kara <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/ext4/xattr.c |    3 +++
 1 file changed, 3 insertions(+)

fs/ext4/xattr.c +3 -0

@@ -2809,6 +2809,9 @@ shift:
 			(void *)header, total_ino);
 	EXT4_I(inode)->i_extra_isize = new_extra_isize;
 
+	if (ext4_has_inline_data(inode))
+		error = ext4_find_inline_data_nolock(inode);
+
 cleanup:
 	if (error && (mnt_count != le16_to_cpu(sbi->s_es->s_mnt_count))) {
 		ext4_warning(inode->i_sb, "Unable to expand inode %lu. Delete some EAs or run e2fsck.",

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #7 lore raw

PATCH 7/21 ext4: zero i_disksize when initializing the bootloader inode

Link https://bugzilla.kernel.org/show_bug.cgi?id=217159

From: Zhihao Cheng <[email protected]>

commit f5361da1e60d54ec81346aee8e3d8baf1be0b762 upstream.

If the boot loader inode has never been used before, the EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the i_size to 0. However, if the "never before used" boot loader has a non-zero i_size, then i_disksize will be non-zero, and the inconsistency between i_size and i_disksize can trigger a kernel warning:

 WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
 RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
 Call Trace:
  vfs_write+0x3b1/0x5c0
  ksys_write+0x77/0x160
  __x64_sys_write+0x22/0x30
  do_syscall_64+0x39/0x80

Reproducer:
1. create corrupted image and mount it:

       mke2fs -t ext4 /tmp/foo.img 200
       debugfs -wR "sif <5> size 25700" /tmp/foo.img
       mount -t ext4 /tmp/foo.img /mnt
       cd /mnt
       echo 123 > file
 2. Run the reproducer program:
       posix_memalign(&buf, 1024, 1024)
       fd = open("file", O_RDWR | O_DIRECT);
       ioctl(fd, EXT4_IOC_SWAP_BOOT);
       write(fd, buf, 1024);

Fix this by setting i_disksize as well as i_size to zero when initiaizing the boot loader inode.

Signed-off-by Zhihao Cheng <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/ext4/ioctl.c |    1 +
 1 file changed, 1 insertion(+)

fs/ext4/ioctl.c +1 -0

@@ -150,6 +150,7 @@ static long swap_inode_boot_loader(struc
 		ei_bl->i_flags = 0;
 		inode_bl->i_version = 1;
 		i_size_write(inode_bl, 0);
+		EXT4_I(inode_bl)->i_disksize = inode_bl->i_size;
 		inode_bl->i_mode = S_IFREG;
 		if (ext4_has_feature_extents(sb)) {
 			ext4_set_inode_flag(inode_bl, EXT4_INODE_EXTENTS);

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #8 lore raw

PATCH 8/21 nfc: change order inside nfc_se_io error path

From: Fedor Pchelkin <[email protected]>

commit 7d834b4d1ab66c48e8c0810fdeadaabb80fa2c81 upstream.

cb_context should be freed on the error path in nfc_se_io as stated by commit 25ff6f8a5a3b ("nfc: fix memory leak of se_io context in nfc_genl_se_io").

Make the error path in nfc_se_io unwind everything in reverse order, i.e. free the cb_context after unlocking the device.

Signed-off-by Fedor Pchelkin <[email protected]>

Reviewed-by Krzysztof Kozlowski <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jakub Kicinski <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/nfc/netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/nfc/netlink.c +1 -1

@@ -1454,8 +1454,8 @@ static int nfc_se_io(struct nfc_dev *dev
 	return rc;
 
 error:
-	kfree(cb_context);
 	device_unlock(&dev->dev);
+	kfree(cb_context);
 	return rc;
 }

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #9 lore raw

PATCH 9/21 nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties

From: Kang Chen <[email protected]>

[ Upstream commit 11f180a5d62a51b484e9648f9b310e1bd50b1a57 ]

devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause out-of-bounds write in device_property_read_u8_array later.

Fixes a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")

Signed-off-by Kang Chen <[email protected]>

Reviewed-by Krzysztof Kozlowski <[email protected]>

Reviewed-by Simon Horman <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Paolo Abeni <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nfc/fdp/i2c.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/nfc/fdp/i2c.c +4 -0

index 4020c11a9415b..3c543981ea180 100644
@@ -263,6 +263,9 @@ static void fdp_nci_i2c_read_device_properties(struct device *dev,
 					   len * sizeof(**fw_vsc_cfg),
 					   GFP_KERNEL);
 
+		if (!*fw_vsc_cfg)
+			goto alloc_err;
+
 		r = device_property_read_u8_array(dev, FDP_DP_FW_VSC_CFG_NAME,
 						  *fw_vsc_cfg, len);

@@ -276,6 +279,7 @@ static void fdp_nci_i2c_read_device_properties(struct device *dev,
 		*fw_vsc_cfg = NULL;
 	}
 
+alloc_err:
 	dev_dbg(dev, "Clock type: %d, clock frequency: %d, VSC: %s",
 		*clock_type, *clock_freq, *fw_vsc_cfg != NULL ? "yes" : "no");
 }

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #10 lore raw

PATCH 10/21 ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()

From: Eric Dumazet <[email protected]>

[ Upstream commit 693aa2c0d9b6d5b1f2745d31b6e70d09dbbaf06e ]

ila_xlat_nl_cmd_get_mapping() generates an empty skb, triggerring a recent sanity check [1].

Instead, return an error code, so that user space
can get it.

[1]
skb_assert_len

WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156

sp : ffff80001e0d6c40
x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0
x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00
x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10
x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0
x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600 x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e

Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_handle_end kernel/softirq.c:414 [inline]
softirqs last enabled at (136418): [<ffff800008020ea8>] __do_softirq+0xd4c/0xfa4 kernel/softirq.c:600
softirqs last disabled at (136371): [<ffff80000802b4a4>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80
---[ end trace 0000000000000000 ]---

skb len=0 headroom=0 headlen=0 tailroom=192 mac=(0,0) net=(0,-1) trans=-1 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0010 pkttype=6 iif=0 dev name=nlmon0 feat=0x0000000000005861

Fixes 7f00feaf1076 ("ila: Add generic ILA translation facility")

Reported-by syzbot <[email protected]>

Signed-off-by Eric Dumazet <[email protected]>

Signed-off-by David S. Miller <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/ipv6/ila/ila_xlat.c | 1 +
 1 file changed, 1 insertion(+)

net/ipv6/ila/ila_xlat.c +1 -0

index 3123b9de91b5e..9dd76af884f1d 100644
@@ -442,6 +442,7 @@ static int ila_nl_cmd_get_mapping(struct sk_buff *skb, struct genl_info *info)
 
 	rcu_read_lock();
 
+	ret = -ESRCH;
 	ila = ila_lookup_by_params(&xp, ilan);
 	if (ila) {
 		ret = ila_dump_info(ila,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #11 lore raw

PATCH 11/21 net: caif: Fix use-after-free in cfusbl_device_notify()

From: Shigeru Yoshida <[email protected]>

[ Upstream commit 9781e98a97110f5e76999058368b4be76a788484 ]

syzbot reported use-after-free in cfusbl_device_notify() [1]. This causes a stack trace like below:

BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214

CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
 print_report mm/kasan/report.c:429 [inline]
 kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
 cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
 call_netdevice_notifiers net/core/dev.c:1997 [inline]
 netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
 netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
 default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>

When unregistering a net device, unregister_netdevice_many_notify() sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers with NETDEV_UNREGISTER, and adds the device to the todo list.

Later on, devices in the todo list are processed by netdev_run_todo(). netdev_run_todo() waits devices' reference count become 1 while rebdoadcasting NETDEV_UNREGISTER notification.

When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple times, the parent device might be freed. This could cause UAF. Processing NETDEV_UNREGISTER multiple times also causes inbalance of reference count for the module.

This patch fixes the issue by accepting only first NETDEV_UNREGISTER notification.

Fixes 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")

CC [email protected] <[email protected]>

Reported-by [email protected]

Link https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f [1]

Signed-off-by Shigeru Yoshida <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Jakub Kicinski <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/caif/caif_usb.c | 3 +++
 1 file changed, 3 insertions(+)

net/caif/caif_usb.c +3 -0

index 485dde566c1a9..98c0548c6f947 100644
@@ -135,6 +135,9 @@ static int cfusbl_device_notify(struct notifier_block *me, unsigned long what,
 	struct usb_device *usbdev;
 	int res;
 
+	if (what == NETDEV_UNREGISTER && dev->reg_state >= NETREG_UNREGISTERED)
+		return 0;
+
 	/* Check whether we have a NCM device, and find its VID/PID. */
 	if (!(dev->dev.parent && dev->dev.parent->driver &&
 	      strcmp(dev->dev.parent->driver->name, "cdc_ncm") == 0))

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #12 lore raw

PATCH 12/21 clk: qcom: mmcc-apq8084: remove spdm clocks

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 7b347f4b677b6d84687e67d82b6b17c6f55ea2b4 ]

SPDM is used for debug/profiling and does not have any other functionality. These clocks can safely be removed.

Reviewed-by Konrad Dybcio <[email protected]>

Signed-off-by Dmitry Baryshkov <[email protected]>

Signed-off-by Bjorn Andersson <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/clk/qcom/mmcc-apq8084.c | 271 --------------------------------
 1 file changed, 271 deletions(-)

drivers/clk/qcom/mmcc-apq8084.c +0 ~~-271~~

index 30777f9f1a439..9c50b5a90e0b6 100644
@@ -2373,262 +2373,6 @@ static struct clk_branch mmss_rbcpr_clk = {
 	},
 };
 
-static struct clk_branch mmss_spdm_ahb_clk = {
-	.halt_reg = 0x0230,
-	.clkr = {
-		.enable_reg = 0x0230,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_ahb_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_ahb_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_axi_clk = {
-	.halt_reg = 0x0210,
-	.clkr = {
-		.enable_reg = 0x0210,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_axi_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_axi_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_csi0_clk = {
-	.halt_reg = 0x023c,
-	.clkr = {
-		.enable_reg = 0x023c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_csi0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_csi0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_gfx3d_clk = {
-	.halt_reg = 0x022c,
-	.clkr = {
-		.enable_reg = 0x022c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_gfx3d_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_gfx3d_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_jpeg0_clk = {
-	.halt_reg = 0x0204,
-	.clkr = {
-		.enable_reg = 0x0204,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_jpeg0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_jpeg0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_jpeg1_clk = {
-	.halt_reg = 0x0208,
-	.clkr = {
-		.enable_reg = 0x0208,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_jpeg1_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_jpeg1_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_jpeg2_clk = {
-	.halt_reg = 0x0224,
-	.clkr = {
-		.enable_reg = 0x0224,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_jpeg2_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_jpeg2_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_mdp_clk = {
-	.halt_reg = 0x020c,
-	.clkr = {
-		.enable_reg = 0x020c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_mdp_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_mdp_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_pclk0_clk = {
-	.halt_reg = 0x0234,
-	.clkr = {
-		.enable_reg = 0x0234,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_pclk0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_pclk0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_pclk1_clk = {
-	.halt_reg = 0x0228,
-	.clkr = {
-		.enable_reg = 0x0228,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_pclk1_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_pclk1_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_vcodec0_clk = {
-	.halt_reg = 0x0214,
-	.clkr = {
-		.enable_reg = 0x0214,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_vcodec0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_vcodec0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_vfe0_clk = {
-	.halt_reg = 0x0218,
-	.clkr = {
-		.enable_reg = 0x0218,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_vfe0_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_vfe0_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_vfe1_clk = {
-	.halt_reg = 0x021c,
-	.clkr = {
-		.enable_reg = 0x021c,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_vfe1_clk",
-			.parent_names = (const char *[]){
-				"mmss_spdm_vfe1_div_clk",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_rm_axi_clk = {
-	.halt_reg = 0x0304,
-	.clkr = {
-		.enable_reg = 0x0304,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_rm_axi_clk",
-			.parent_names = (const char *[]){
-				"mmss_axi_clk_src",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-static struct clk_branch mmss_spdm_rm_ocmemnoc_clk = {
-	.halt_reg = 0x0308,
-	.clkr = {
-		.enable_reg = 0x0308,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "mmss_spdm_rm_ocmemnoc_clk",
-			.parent_names = (const char *[]){
-				"ocmemnoc_clk_src",
-			},
-			.num_parents = 1,
-			.flags = CLK_SET_RATE_PARENT,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
-
 static struct clk_branch mmss_misc_ahb_clk = {
 	.halt_reg = 0x502c,
 	.clkr = {

@@ -3261,21 +3005,6 @@ static struct clk_regmap *mmcc_apq8084_clocks[] = {
 	[MDSS_VSYNC_CLK] = &mdss_vsync_clk.clkr,
 	[MMSS_RBCPR_AHB_CLK] = &mmss_rbcpr_ahb_clk.clkr,
 	[MMSS_RBCPR_CLK] = &mmss_rbcpr_clk.clkr,
-	[MMSS_SPDM_AHB_CLK] = &mmss_spdm_ahb_clk.clkr,
-	[MMSS_SPDM_AXI_CLK] = &mmss_spdm_axi_clk.clkr,
-	[MMSS_SPDM_CSI0_CLK] = &mmss_spdm_csi0_clk.clkr,
-	[MMSS_SPDM_GFX3D_CLK] = &mmss_spdm_gfx3d_clk.clkr,
-	[MMSS_SPDM_JPEG0_CLK] = &mmss_spdm_jpeg0_clk.clkr,
-	[MMSS_SPDM_JPEG1_CLK] = &mmss_spdm_jpeg1_clk.clkr,
-	[MMSS_SPDM_JPEG2_CLK] = &mmss_spdm_jpeg2_clk.clkr,
-	[MMSS_SPDM_MDP_CLK] = &mmss_spdm_mdp_clk.clkr,
-	[MMSS_SPDM_PCLK0_CLK] = &mmss_spdm_pclk0_clk.clkr,
-	[MMSS_SPDM_PCLK1_CLK] = &mmss_spdm_pclk1_clk.clkr,
-	[MMSS_SPDM_VCODEC0_CLK] = &mmss_spdm_vcodec0_clk.clkr,
-	[MMSS_SPDM_VFE0_CLK] = &mmss_spdm_vfe0_clk.clkr,
-	[MMSS_SPDM_VFE1_CLK] = &mmss_spdm_vfe1_clk.clkr,
-	[MMSS_SPDM_RM_AXI_CLK] = &mmss_spdm_rm_axi_clk.clkr,
-	[MMSS_SPDM_RM_OCMEMNOC_CLK] = &mmss_spdm_rm_ocmemnoc_clk.clkr,
 	[MMSS_MISC_AHB_CLK] = &mmss_misc_ahb_clk.clkr,
 	[MMSS_MMSSNOC_AHB_CLK] = &mmss_mmssnoc_ahb_clk.clkr,
 	[MMSS_MMSSNOC_BTO_AHB_CLK] = &mmss_mmssnoc_bto_ahb_clk.clkr,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #13 lore raw

PATCH 13/21 MIPS: Fix a compilation issue

From: xurui <[email protected]>

[ Upstream commit 109d587a4b4d7ccca2200ab1f808f43ae23e2585 ]

arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]

All bits in KORINA_STAT are already at the correct position, so there is no addtional shift needed.

Signed-off-by xurui <[email protected]>

Signed-off-by Thomas Bogendoerfer <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/mips/include/asm/mach-rc32434/pci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/mips/include/asm/mach-rc32434/pci.h +1 -1

index 6f40d1515580b..1ff8a987025c8 100644
@@ -377,7 +377,7 @@ struct pci_msu {
 				 PCI_CFG04_STAT_SSE | \
 				 PCI_CFG04_STAT_PE)
 
-#define KORINA_CNFG1		((KORINA_STAT<<16)|KORINA_CMD)
+#define KORINA_CNFG1		(KORINA_STAT | KORINA_CMD)
 
 #define KORINA_REVID		0
 #define KORINA_CLASS_CODE	0

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #14 lore raw

PATCH 14/21 alpha: fix R_ALPHA_LITERAL reloc for large modules

From: Edward Humes <[email protected]>

[ Upstream commit b6b17a8b3ecd878d98d5472a9023ede9e669ca72 ]

Previously, R_ALPHA_LITERAL relocations would overflow for large kernel modules.

This was because the Alpha's apply_relocate_add was relying on the kernel's module loader to have sorted the GOT towards the very end of the module as it was mapped into memory in order to correctly assign the global pointer. While this behavior would mostly work fine for small kernel modules, this approach would overflow on kernel modules with large GOT's since the global pointer would be very far away from the GOT, and thus, certain entries would be out of range.

This patch fixes this by instead using the Tru64 behavior of assigning the global pointer to be 32KB away from the start of the GOT. The change made in this patch won't work for multi-GOT kernel modules as it makes the assumption the module only has one GOT located at the beginning of .got, although for the vast majority kernel modules, this should be fine. Of the kernel modules that would previously result in a relocation error, none of them, even modules like nouveau, have even come close to filling up a single GOT, and they've all worked fine under this patch.

Signed-off-by Edward Humes <[email protected]>

Signed-off-by Matt Turner <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/alpha/kernel/module.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

arch/alpha/kernel/module.c +1 -3

index 47632fa8c24e0..b169dc9a9ac17 100644
@@ -158,10 +158,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:14 UTC #15 lore raw

PATCH 15/21 macintosh: windfarm: Use unsigned type for 1-bit bitfields

Link https://lore.kernel.org/r/20230215-windfarm-wsingle-bit-bitfield-constant-conversion-v1-1-26415072e855@kernel.org open here

From: Nathan Chancellor <[email protected]>

[ Upstream commit 748ea32d2dbd813d3bd958117bde5191182f909a ]

Clang warns:

drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]

                  lm->inited = 1;
                             ^ ~

drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]

                  pow->fake_volts = 1;
                                  ^ ~
  drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
                  pow->quadratic = 1;
                                 ^ ~

There is no bug here since no code checks the actual value of these fields, just whether or not they are zero (boolean context), but this can be easily fixed by switching to an unsigned type.

Signed-off-by Nathan Chancellor <[email protected]>

Signed-off-by Michael Ellerman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/macintosh/windfarm_lm75_sensor.c | 4 ++--
 drivers/macintosh/windfarm_smu_sensors.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

drivers/macintosh/windfarm_lm75_sensor.c +2 -2

index 6cdfe714901d5..1332fc789056a 100644
@@ -34,8 +34,8 @@
 #endif
 
 struct wf_lm75_sensor {
-	int			ds1775 : 1;
-	int			inited : 1;
+	unsigned int		ds1775 : 1;
+	unsigned int		inited : 1;
 	struct i2c_client	*i2c;
 	struct wf_sensor	sens;
 };

drivers/macintosh/windfarm_smu_sensors.c +2 -2

index 172fd267dcf60..0f4017a8189e5 100644
@@ -275,8 +275,8 @@ struct smu_cpu_power_sensor {
 	struct list_head	link;
 	struct wf_sensor	*volts;
 	struct wf_sensor	*amps;
-	int			fake_volts : 1;
-	int			quadratic : 1;
+	unsigned int		fake_volts : 1;
+	unsigned int		quadratic : 1;
 	struct wf_sensor	sens;
 };
 #define to_smu_cpu_power(c) container_of(c, struct smu_cpu_power_sensor, sens)

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:15 UTC #16 lore raw

PATCH 16/21 PCI: Add SolidRun vendor ID

From: Alvaro Karsz <[email protected]>

[ Upstream commit db6c4dee4c104f50ed163af71c53bfdb878a8318 ]

Add SolidRun vendor ID to pci_ids.h

The vendor ID is used in 2 different source files, the SNET vDPA driver and PCI quirks.

Signed-off-by Alvaro Karsz <[email protected]>

Acked-by Bjorn Helgaas <[email protected]>

Message-Id: <[email protected]>

Signed-off-by Michael S. Tsirkin <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 include/linux/pci_ids.h | 2 ++
 1 file changed, 2 insertions(+)

include/linux/pci_ids.h +2 -0

index d4eae72202fab..0122286beda53 100644
@@ -3045,6 +3045,8 @@
 
 #define PCI_VENDOR_ID_3COM_2		0xa727
 
+#define PCI_VENDOR_ID_SOLIDRUN		0xd063
+
 #define PCI_VENDOR_ID_DIGIUM		0xd161
 #define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:15 UTC #17 lore raw

PATCH 17/21 PCI: Avoid FLR for SolidRun SNET DPU rev 1

From: Alvaro Karsz <[email protected]>

[ Upstream commit d089d69cc1f824936eeaa4fa172f8fa1a0949eaa ]

This patch fixes a FLR bug on the SNET DPU rev 1 by setting the PCI_DEV_FLAGS_NO_FLR_RESET flag.

As there is a quirk to avoid FLR (quirk_no_flr), I added a new quirk to check the rev ID before calling to quirk_no_flr.

Without this patch, a SNET DPU rev 1 may hang when FLR is applied.

Signed-off-by Alvaro Karsz <[email protected]>

Acked-by Bjorn Helgaas <[email protected]>

Message-Id: <[email protected]>

Signed-off-by Michael S. Tsirkin <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pci/quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

drivers/pci/quirks.c +8 -0

index b9fedf9c77cb9..d0bff9a9f9a9c 100644
@@ -5068,6 +5068,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x7901, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
 
+/* FLR may cause the SolidRun SNET DPU (rev 0x1) to hang */
+static void quirk_no_flr_snet(struct pci_dev *dev)
+{
+	if (dev->revision == 0x1)
+		quirk_no_flr(dev);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLIDRUN, 0x1000, quirk_no_flr_snet);
+
 static void quirk_no_ext_tags(struct pci_dev *pdev)
 {
 	struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:15 UTC #18 lore raw

PATCH 18/21 media: ov5640: Fix analogue gain control

From: Paul Elder <[email protected]>

[ Upstream commit afa4805799c1d332980ad23339fdb07b5e0cf7e0 ]

Gain control is badly documented in publicly available (including leaked) documentation.

There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value (plus an enable bit in bit 6). The driver hardcodes it to 0x43, which one application note states is equal to x1.047. The documentation also states that 0x40 is equel to x1.000. The pre-gain thus seems to be expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984. What the pre-gain does is however unspecified.

There is then an AGC gain limit, in registers 0x3a18 and 0x3a19, expressed as a 10-bit "real gain format" value. One application note sets it to 0x00f8 and states it is equal to x15.5, so it appears to be expressed in 1/16 increments, up to x63.9375.

The manual gain is stored in registers 0x350a and 0x350b, also as a 10-bit "real gain format" value. It is documented in the application note as a Q6.4 values, up to x63.9375.

One version of the datasheet indicates that the sensor supports a digital gain:

The OV5640 supports 1/2/4 digital gain. Normally, the gain is controlled automatically by the automatic gain control (AGC) block.

It isn't clear how that would be controlled manually.

There appears to be no indication regarding whether the gain controlled through registers 0x350a and 0x350b is an analogue gain only or also includes digital gain. The words "real gain" don't necessarily mean "combined analogue and digital gains". Some OmniVision sensors (such as the OV8858) are documented as supoprting different formats for the gain values, selectable through a register bit, and they are called "real gain format" and "sensor gain format". For that sensor, we have (one of) the gain registers documented as

0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain

If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1, gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain, 0x70 is 4x gain

(The second part of the text makes little sense)

"Real gain" may thus refer to the combination of the coarse and fine analogue gains as a single value.

The OV5640 0x350a and 0x350b registers thus appear to control analogue gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.

If registers 0x350a and 0x350b are later found to control digital gain as well, the driver could then restrict the range of the analogue gain control value to lower than x64 and add a separate digital gain control.

Signed-off-by Paul Elder <[email protected]>

Signed-off-by Laurent Pinchart <[email protected]>

Reviewed-by Jacopo Mondi <[email protected]>

Reviewed-by Jai Luthra <[email protected]>

Signed-off-by Sakari Ailus <[email protected]>

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/media/i2c/ov5640.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/media/i2c/ov5640.c +1 -1

index eb0331b8a5833..b78e35425d14f 100644
@@ -2002,7 +2002,7 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
 	/* Auto/manual gain */
 	ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
 					     0, 1, 1, 1);
-	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
+	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN,
 					0, 1023, 1, 0);
 
 	ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,

Signature · 1 line

2.39.2

Greg Kroah-Hartman

author maintainer

2023-03-15 12:15 UTC #19 lore raw

PATCH 19/21 tipc: improve function tipc_wait_for_cond()

From: Tung Nguyen <[email protected]>

commit 223b7329ec6a0dae1b7f7db7b770e93f4a069ef9 upstream.

Commit 844cf763fba6 ("tipc: make macro tipc_wait_for_cond() smp safe") replaced finish_wait() with remove_wait_queue() but still used prepare_to_wait(). This causes unnecessary conditional checking before adding to wait queue in prepare_to_wait().

This commit replaces prepare_to_wait() with add_wait_queue() as the pair function with remove_wait_queue().

Acked-by Ying Xue <[email protected]>

Acked-by Jon Maloy <[email protected]>

Signed-off-by Tung Nguyen <[email protected]>

Signed-off-by David S. Miller <[email protected]>

Cc Lee Jones <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/tipc/socket.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/tipc/socket.c +1 -1

@@ -373,7 +373,7 @@ static int tipc_sk_sock_err(struct socke
 		rc_ = tipc_sk_sock_err((sock_), timeo_);		       \
 		if (rc_)						       \
 			break;						       \
-		prepare_to_wait(sk_sleep(sk_), &wait_, TASK_INTERRUPTIBLE);    \
+		add_wait_queue(sk_sleep(sk_), &wait_);                         \
 		release_sock(sk_);					       \
 		*(timeo_) = wait_woken(&wait_, TASK_INTERRUPTIBLE, *(timeo_)); \
 		sched_annotate_sleep();				               \

Greg Kroah-Hartman

author maintainer

2023-03-15 12:15 UTC #20 lore raw

PATCH 20/21 drm/i915: Dont use BAR mappings for ring buffers with LLC

From: John Harrison <[email protected]>

commit 85636167e3206c3fbd52254fc432991cc4e90194 upstream.

Direction from hardware is that ring buffers should never be mapped via the BAR on systems with LLC. There are too many caching pitfalls due to the way BAR accesses are routed. So it is safest to just not use it.

Signed-off-by John Harrison <[email protected]>

Fixes 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere")

Cc Chris Wilson <[email protected]>

Cc Joonas Lahtinen <[email protected]>

Cc Jani Nikula <[email protected]>

Cc Rodrigo Vivi <[email protected]>

Cc Tvrtko Ursulin <[email protected]>

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

Cc <[email protected]> # v4.9+

Tested-by Jouni Högander <[email protected]>

Reviewed-by Daniele Ceraolo Spurio <[email protected]>

(cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919)

Signed-off-by Jani Nikula <[email protected]>

Signed-off-by John Harrison <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/i915/intel_ringbuffer.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/gpu/drm/i915/intel_ringbuffer.c +2 -2

@@ -1314,7 +1314,7 @@ int intel_ring_pin(struct intel_ring *ri
 	if (unlikely(ret))
 		return ret;
 
-	if (i915_vma_is_map_and_fenceable(vma))
+	if (i915_vma_is_map_and_fenceable(vma) && !HAS_LLC(vma->vm->i915))
 		addr = (void __force *)i915_vma_pin_iomap(vma);
 	else
 		addr = i915_gem_object_pin_map(vma->obj, map);

@@ -1346,7 +1346,7 @@ void intel_ring_unpin(struct intel_ring
 	/* Discard any unused bytes beyond that submitted to hw. */
 	intel_ring_reset(ring, ring->tail);
 
-	if (i915_vma_is_map_and_fenceable(ring->vma))
+	if (i915_vma_is_map_and_fenceable(ring->vma) && !HAS_LLC(ring->vma->vm->i915))
 		i915_vma_unpin_iomap(ring->vma);
 	else
 		i915_gem_object_unpin_map(ring->vma->obj);

Greg Kroah-Hartman

author maintainer

2023-03-15 12:15 UTC #21 lore raw

PATCH 21/21 x86/cpu: Fix LFENCE serialization check in init_amd()

From: Rhythm Mahajan <[email protected]>

The commit: 3f235279828c ("x86/cpu: Restore AMD's DE_CFG MSR after resume") which was backported from the upstream commit: 2632daebafd0 renamed the MSR_F10H_DECFG_LFENCE_SERIALIZE macro to MSR_AMD64_DE_CFG_LFENCE_SERIALIZE. The fix for 4.14 and 4.9 changed MSR_F10H_DECFG_LFENCE_SERIALIZE to MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT in the init_amd() function, but should have used MSR_AMD64_DE_CFG_LFENCE_SERIALIZE. This causes a discrepency in the LFENCE serialization check in the init_amd() function.

This causes a ~16% sysbench memory regression, when running:

    sysbench --test=memory run

Fixes 3f235279828c ("x86/cpu: Restore AMD's DE_CFG MSR after resume")

Signed-off-by Rhythm Mahajan <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/kernel/cpu/amd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/x86/kernel/cpu/amd.c +1 -1

@@ -950,7 +950,7 @@ static void init_amd(struct cpuinfo_x86
 		 * serializing.
 		 */
 		ret = rdmsrl_safe(MSR_AMD64_DE_CFG, &val);
-		if (!ret && (val & MSR_AMD64_DE_CFG_LFENCE_SERIALIZE_BIT)) {
+		if (!ret && (val & MSR_AMD64_DE_CFG_LFENCE_SERIALIZE)) {
 			/* A serializing LFENCE stops RDTSC speculation */
 			set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 		} else {

Chris Paterson

Tested-by on the v1 series

2023-03-15 13:55 UTC #22 lore raw