Skip to contentSkip to conversation

ASoC: dt-bindings: adi,adau17x1: Convert to DT schema

PATCH In review Vijaya Anand 4 participants 8 messages Mar 15, 2023 – Mar 17, 2023

Subsystems (3)
Device tree bindings ASoC Analog devices inc ASoC codec drivers
lore
Share & tools
lore

Vijaya Anand

author
#0 lore raw

PATCH v2 1/1 ASoC: dt-bindings: adi,adau17x1: Convert to DT schema

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format.

Signed-off-by Vijaya Anand <[email protected]>
Cc Daniel Baluta <[email protected]>

---
Changes since v1:
- added 'Codec' in title to clarify type of devices
- put compatible devices in lexographic order
- changed description of clocks
- changed 'unevaluatedProperties' to 'additionalProperties'
- changed node names to be generic

---
 .../bindings/sound/adi,adau17x1.txt           | 32 ------------
 .../bindings/sound/adi,adau17x1.yaml          | 52 +++++++++++++++++++
 2 files changed, 52 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt
 create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml
Documentation/devicetree/bindings/sound/adi,adau17x1.txt deleted +0 -32
deleted file mode 100644
index 1447dec28125..000000000000
@@ -1,32 +0,0 @@
-Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781
-
-Required properties:
-
- - compatible:		Should contain one of the following:
-			"adi,adau1361"
-			"adi,adau1461"
-			"adi,adau1761"
-			"adi,adau1961"
-			"adi,adau1381"
-			"adi,adau1781"
-
- - reg:			The i2c address. Value depends on the state of ADDR0
-			and ADDR1, as wired in hardware.
-
-Optional properties:
- - clock-names:		If provided must be "mclk".
- - clocks:		phandle + clock-specifiers for the clock that provides
-			the audio master clock for the device.
-
-Examples:
-#include <dt-bindings/sound/adau17x1.h>
-
-	i2c_bus {
-		adau1361@38 {
-			compatible = "adi,adau1761";
-			reg = <0x38>;
-
-			clock-names = "mclk";
-			clocks = <&audio_clock>;
-		};
-	};
Documentation/devicetree/bindings/sound/adi,adau17x1.yaml new file +52 -0

52 lines not on this page · raw message

+ };

Signature · 1 line
2.37.1 (Apple Git-137.1)
Reviewed-by on v2 1/1
#1 lore raw
Quoted 7 lines · Vijaya Anand

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format.

Signed-off-by Vijaya Anand <[email protected]>
Cc Daniel Baluta <[email protected]>
Quoted 7 lines

---
Changes since v1:
- added 'Codec' in title to clarify type of devices
- put compatible devices in lexographic order
- changed description of clocks
- changed 'unevaluatedProperties' to 'additionalProperties'
- changed node names to be generic

You sent a v2, so this should be v3. Keep it consistent, otherwise it confuses reviewers...

Quoted 7 lines
---
 .../bindings/sound/adi,adau17x1.txt           | 32 ------------
 .../bindings/sound/adi,adau17x1.yaml          | 52 +++++++++++++++++++
 2 files changed, 52 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt
 create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml
Reviewed-by Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof

maintainer
#2 lore raw
In reply to Vijaya Anand
Quoted 15 lines · Vijaya Anand

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format.

Signed-off-by Vijaya Anand <[email protected]>
Cc Daniel Baluta <[email protected]>

---
Changes since v1:
- added 'Codec' in title to clarify type of devices
- put compatible devices in lexographic order
- changed description of clocks
- changed 'unevaluatedProperties' to 'additionalProperties'
- changed node names to be generic

Quoted 7 lines
---
 .../bindings/sound/adi,adau17x1.txt           | 32 ------------
 .../bindings/sound/adi,adau17x1.yaml          | 52 +++++++++++++++++++
 2 files changed, 52 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt
 create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/adi,adau17x1.yaml:8:2: [warning] wrong indentation: expected 2 but found 1 (indentation)

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/sound/adi,adau17x1.example.dts:29.3-30.1 syntax error FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/sound/adi,adau17x1.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

#3 lore raw
Quoted 28 lines · Rob Herring
Quoted 15 lines · Vijaya Anand

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format.

Signed-off-by Vijaya Anand <[email protected]>
Cc Daniel Baluta <[email protected]>

---
Changes since v1:
- added 'Codec' in title to clarify type of devices
- put compatible devices in lexographic order
- changed description of clocks
- changed 'unevaluatedProperties' to 'additionalProperties'
- changed node names to be generic

Quoted 7 lines
---
 .../bindings/sound/adi,adau17x1.txt           | 32 ------------
 .../bindings/sound/adi,adau17x1.yaml          | 52 +++++++++++++++++++
 2 files changed, 52 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.txt
 create mode 100644 Documentation/devicetree/bindings/sound/adi,adau17x1.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):

Quoted 7 lines

yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/adi,adau17x1.yaml:8:2: [warning] wrong indentation: expected 2 but found 1 (indentation)

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/sound/adi,adau17x1.example.dts:29.3-30.1 syntax error FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/sound/adi,adau17x1.example.dtb] Error 1

Test your patches before sending... this never worked.

Best regards,
Krzysztof

maintainer
#4 lore raw
In reply to Vijaya Anand
Quoted 6 lines · Vijaya Anand

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: adi,adau17x1: Convert to DT schema

      commit: 87771c94025890246a6dfec9773eb62bd41c4c5a

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

#5 lore raw
Quoted 8 lines · Mark Brown
Quoted 6 lines · Vijaya Anand

Convert the binding document for adi,adau17x1 from txt to yaml so one could validate dt-entries correctly and any future additions can go into yaml format. Add address and size cells to example to prevent errors regarding reg format.

Quoted 8 lines

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: adi,adau17x1: Convert to DT schema

      commit: 87771c94025890246a6dfec9773eb62bd41c4c5a

Hi Mark,

There was a warning from Rob's bot. Can you drop the patch or you expect follow-up?

Best regards,
Krzysztof

maintainer
#6 lore raw
Quoted 2 lines · Krzysztof Kozlowski

There was a warning from Rob's bot. Can you drop the patch or you expect follow-up?

A followup would be easiest.

#7 lore raw
Quoted 6 lines · Mark Brown
Quoted 2 lines · Krzysztof Kozlowski

There was a warning from Rob's bot. Can you drop the patch or you expect follow-up?

A followup would be easiest.

Sent one.

Best regards,
Krzysztof