Skip to contentSkip to conversation

docs:remove cxl3 device size

PATCH In review Raghu H 2 participants 10 messages Apr 5, 2023 – Apr 14, 2023

lore
Share & tools
lore

Raghu H

author
#0 lore raw

PATCH 1/1 docs:remove cxl3 device size

cxl device typ3 size is read from the memory backend device, removing the size option specified in cxl sample command.

Updating sample command to reflect target architecture as x86_64.

---
 docs/system/devices/cxl.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
docs/system/devices/cxl.rst +7 -7
index f25783a4ec..b228146cec 100644
@@ -302,7 +302,7 @@ Example command lines
 ---------------------
 A very simple setup with just one directly attached CXL Type 3 device::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
   ...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
@@ -315,7 +315,7 @@ A setup suitable for 4 way interleave. Only one fixed window provided, to enable
 interleave across 2 CXL host bridges.  Each host bridge has 2 CXL Root Ports, with
 the CXL Type3 device directly attached (no switches).::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
   ...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
@@ -339,7 +339,7 @@ the CXL Type3 device directly attached (no switches).::
 
 An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
   ...
   -object memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M \
@@ -354,13 +354,13 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
   -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
   -device cxl-upstream,bus=root_port0,id=us0 \
   -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
-  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
   -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
-  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
   -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
-  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
   -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
-  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
 
 Kernel Configuration Options
Signature · 1 line
2.34.1
#1 lore raw

On Wed, 5 Apr 2023 15:57:38 +0530
Raghu H <[email protected]> wrote:
Hi Raghu,

Thanks for tidying this up! (and reporting it in the first place) A few minor comments for v2.

A better title might be
docs/cxl: Remove incorrect CXL type 3 size parameter.

Quoted 1 line

cxl device typ3 size is read from the memory backend device, removing the

cxl-type3 memory size is read directly from the provided memory backed end device. Remove non existent size option.

Quoted 3 lines

size option specified in cxl sample command.

Updating sample command to reflect target architecture as x86_64.

There are two changes in here. Please split it into two patches and add a minimal cover letter (mostly as it gives a place for people to respond to both of them with tags etc).

Quoted 11 lines
---
 docs/system/devices/cxl.rst | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
docs/system/devices/cxl.rst +0 -0
index f25783a4ec..b228146cec 100644

docs/system/devices/cxl.rst Example command lines · line 305

Quoted 5 lines
docs/system/devices/cxl.rst +1 -1
@@ -302,7 +302,7 @@ Example command lines
 ---------------------
 A very simple setup with just one directly attached CXL Type 3 device::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \

Minimize the change (and definitely don't tell people to use kvm as that's broken for some usecases - instructions in CXL memory).

+ qemu-system-x86_64 -M q35,cxl=on -m 4G,maxmem=8G,slots=8 \
is probably the right combination (I tidied up the g / G mix whilst touching the line.

Quoted 39 lines
docs/system/devices/cxl.rst +6 -6
...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
@@ -315,7 +315,7 @@ A setup suitable for 4 way interleave. Only one fixed window provided, to enable
 interleave across 2 CXL host bridges.  Each host bridge has 2 CXL Root Ports, with
 the CXL Type3 device directly attached (no switches).::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
@@ -339,7 +339,7 @@ the CXL Type3 device directly attached (no switches).::
 
 An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
...
   -object memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M \
@@ -354,13 +354,13 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
   -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
   -device cxl-upstream,bus=root_port0,id=us0 \
   -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
-  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
   -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
-  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
   -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
-  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
   -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
-  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
 
 Kernel Configuration Options
author
#2 lore raw

cover Update CXL documentation

Thanks Jonathan for quick review/comments on earlier patch, as suggested splitting into two separate patches
https://www.mail-archive.com/[email protected]/msg952999.html

Removed the unsupported size option for cxl-type3 device, Qemu reads the device size directly from the backend memory device config.

Currently the Qemu CXL emulation for AARCH64 is not available and its only supported on x86_64 platform emulations. Removing the incorrect information and populating with supported x86_64 sample command to emulate cxl devices.

The document will be updated when the AARCH64 support is mainlined.

Raghu H (2):
docs/cxl: Remove incorrect CXL type 3 size parameter docs/cxl: Replace unsupported AARCH64 with x86_64

 docs/system/devices/cxl.rst | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

base-commit: 7d0334e49111787ae19fbc8d29ff6e7347f0605e

Signature · 1 line
2.34.1
author
#3 lore raw

PATCH 1/2 docs/cxl: Remove incorrect CXL type 3 size parameter

cxl-type3 memory size is read directly from the provided memory backed end device. Remove non existent size option

---
 docs/system/devices/cxl.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
docs/system/devices/cxl.rst +4 -4
index f25783a4ec..46f9ae9bf1 100644
@@ -354,13 +354,13 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
   -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
   -device cxl-upstream,bus=root_port0,id=us0 \
   -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
-  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
   -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
-  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
   -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
-  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
   -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
-  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
 
 Kernel Configuration Options
Signature · 1 line
2.34.1
author
#4 lore raw

PATCH 2/2 docs/cxl: Replace unsupported AARCH64 with x86_64

In reply to Raghu H

Currently Qemu CXL emulation support is not availabe on AARCH64 but its available with qemu x86_64 architecture, updating the document to reflect the supported platform.

---
 docs/system/devices/cxl.rst | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
docs/system/devices/cxl.rst +6 -3
index 46f9ae9bf1..c786f0f312 100644
@@ -302,7 +302,8 @@ Example command lines
 ---------------------
 A very simple setup with just one directly attached CXL Type 3 device::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 \
+  -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
   ...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
@@ -315,7 +316,8 @@ A setup suitable for 4 way interleave. Only one fixed window provided, to enable
 interleave across 2 CXL host bridges.  Each host bridge has 2 CXL Root Ports, with
 the CXL Type3 device directly attached (no switches).::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 \
+  -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
   ...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
@@ -339,7 +341,8 @@ the CXL Type3 device directly attached (no switches).::
 
 An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -m 4G,slots=8,maxmem=8G -smp 4 \
+  -machine type=q35,accel=kvm,nvdimm=on,cxl=on -enable-kvm \
   ...
   -object memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M \
Signature · 1 line
2.34.1
author
#5 lore raw

cover Update CXL documentation

In reply to Jonathan Cameron via

Thanks Jonathan for quick review/comments on earlier patch, as suggested splitting into two separate patches
https://www.mail-archive.com/[email protected]/msg952999.html

Removed the unsupported size option for cxl-type3 device, Qemu reads the device size directly from the backend memory device config.

Currently the Qemu CXL emulation for AARCH64 is not available and its only supported on x86_64 platform emulations. Removing the incorrect information and populating with supported x86_64 sample command to emulate cxl devices.

The document will be updated when the AARCH64 support is mainlined.

Raghu H (2):
docs/cxl: Remove incorrect CXL type 3 size parameter docs/cxl: Replace unsupported AARCH64 with x86_64

 docs/system/devices/cxl.rst | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

base-commit: 7d0334e49111787ae19fbc8d29ff6e7347f0605e

Signature · 1 line
2.34.1
author
#6 lore raw

PATCH v2 1/2 docs/cxl: Remove incorrect CXL type 3 size parameter

cxl-type3 memory size is read directly from the provided memory backed end device. Remove non existent size option

---
 docs/system/devices/cxl.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
docs/system/devices/cxl.rst +4 -4
index f25783a4ec..46f9ae9bf1 100644
@@ -354,13 +354,13 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
   -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
   -device cxl-upstream,bus=root_port0,id=us0 \
   -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
-  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0 \
   -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
-  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1 \
   -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
-  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2 \
   -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
-  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3 \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
 
 Kernel Configuration Options
Signature · 1 line
2.34.1
author
#7 lore raw

PATCH v2 2/2 docs/cxl: Replace unsupported AARCH64 with x86_64

In reply to Raghu H

Currently Qemu CXL emulation support is not availabe on AARCH64 but its available with qemu x86_64 architecture, updating the document to reflect the supported platform.

---
 docs/system/devices/cxl.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
docs/system/devices/cxl.rst +3 -3
index 46f9ae9bf1..2ca5a78c51 100644
@@ -302,7 +302,7 @@ Example command lines
 ---------------------
 A very simple setup with just one directly attached CXL Type 3 device::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -M q35,cxl=on -m 4G,maxmem=8G,slots=8 -smp 4 \
   ...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
@@ -315,7 +315,7 @@ A setup suitable for 4 way interleave. Only one fixed window provided, to enable
 interleave across 2 CXL host bridges.  Each host bridge has 2 CXL Root Ports, with
 the CXL Type3 device directly attached (no switches).::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -M q35,cxl=on -m 4G,maxmem=8G,slots=8 -smp 4 \
   ...
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem2,share=on,mem-path=/tmp/cxltest2.raw,size=256M \
@@ -339,7 +339,7 @@ the CXL Type3 device directly attached (no switches).::
 
 An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
 
-  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  qemu-system-x86_64 -M q35,cxl=on -m 4G,maxmem=8G,slots=8 -smp 4 \
   ...
   -object memory-backend-file,id=cxl-mem0,share=on,mem-path=/tmp/cxltest.raw,size=256M \
   -object memory-backend-file,id=cxl-mem1,share=on,mem-path=/tmp/cxltest1.raw,size=256M \
Signature · 1 line
2.34.1
Reviewed-by Jonathan Cameron on the v1 series
#8 lore raw

Re: [PATCH v1 0/2] Update CXL documentation

In reply to Raghu H
Quoted 7 lines · On Thu, 6 Apr 2023 18:58:37 +0530 Raghu H <[email protected]> wrote:

Thanks Jonathan for quick review/comments on earlier patch, as suggested splitting into two separate patches
https://www.mail-archive.com/[email protected]/msg952999.html

Removed the unsupported size option for cxl-type3 device, Qemu reads the device size directly from the backend memory device config.

Quoted 6 lines

Currently the Qemu CXL emulation for AARCH64 is not available and its only supported on x86_64 platform emulations. Removing the incorrect information and populating with supported x86_64 sample command to emulate cxl devices.

The document will be updated when the AARCH64 support is mainlined.

Both look good to me. No need to rush these in.

I'll queue these up in my local tree (and update gitlab/jic23/qemu sometime later this week) but if anyone wants to pick them directly that's fine too.

Quoted 11 lines

Raghu H (2):
docs/cxl: Remove incorrect CXL type 3 size parameter docs/cxl: Replace unsupported AARCH64 with x86_64

 docs/system/devices/cxl.rst | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

base-commit: 7d0334e49111787ae19fbc8d29ff6e7347f0605e

author
#9 lore raw

Re: [PATCH v1 0/2] Update CXL documentation

Thanks Jonathan! I assume it will be merged sometime later with your other patches in the 8.x version!

Quoted 38 lines · Jonathan Cameron
Quoted 7 lines · On Thu, 6 Apr 2023 18:58:37 +0530 Raghu H <[email protected]> wrote:

Thanks Jonathan for quick review/comments on earlier patch, as suggested splitting into two separate patches
https://www.mail-archive.com/[email protected]/msg952999.html

Removed the unsupported size option for cxl-type3 device, Qemu reads the device size directly from the backend memory device config.

Quoted 6 lines

Currently the Qemu CXL emulation for AARCH64 is not available and its only supported on x86_64 platform emulations. Removing the incorrect information and populating with supported x86_64 sample command to emulate cxl devices.

The document will be updated when the AARCH64 support is mainlined.

Both look good to me. No need to rush these in.

I'll queue these up in my local tree (and update gitlab/jic23/qemu sometime later this week) but if anyone wants to pick them directly that's fine too.

Quoted 11 lines

Raghu H (2):
docs/cxl: Remove incorrect CXL type 3 size parameter docs/cxl: Replace unsupported AARCH64 with x86_64

 docs/system/devices/cxl.rst | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

base-commit: 7d0334e49111787ae19fbc8d29ff6e7347f0605e