arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart
Subsystems (2)
PATCH v3 1/1 arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart
From: Nishanth Menon <[email protected]>
wkup_uart and main_uart1 on this platform is used by tifs and DM firmwares. Describe them for completeness including the pinmux.
---
Changes from v2: [1]
- Included the patch version to the $subject
Changes from v1: [0]
- Updated $subject to align with previous commits
[1] https://lore.kernel.org/lkml/[email protected]/
[0] https://lore.kernel.org/linux-devicetree/[email protected]/
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 40 +++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +38 -2
@@ -17,7 +17,9 @@ / { model = "Texas Instruments AM62A7 SK"; aliases { + serial0 = &wkup_uart0; serial2 = &main_uart0; + serial3 = &main_uart1; mmc1 = &sdhci1; };
@@ -114,11 +116,38 @@ led-0 { }; }; +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-pins-default { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ + AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ + AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ + AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ + >; + }; +}; + +/* WKUP UART0 is used for DM firmware logs */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; +}; + &main_pmx0 { main_uart0_pins_default: main-uart0-pins-default { pinctrl-single,pins = < - AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ + AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ + AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ + AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ >; };
@@ -254,6 +283,13 @@ &main_uart0 { pinctrl-0 = <&main_uart0_pins_default>; }; +/* Main UART1 is used for TIFS firmware logs */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + status = "reserved"; +}; + &usbss1 { status = "okay"; };
base-commit: 891db0c48efb48c3af334006f9d7ea6a0aa49cb9
Signature · 1 line
2.40.0
Hi Bryan Brattlof,
Quoted 4 lines · Bryan Brattlof
wkup_uartandmain_uart1on this platform is used by tifs and DM firmwares. Describe them for completeness including the pinmux.
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/1] arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart
commit: bb73613b1670681afdfe0707522ee834e43df484
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh