Skip to contentSkip to conversation

arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart

PATCH Applied Bryan Brattlof 2 participants 2 messages Apr 25, 2023 – Jun 6, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart

From: Nishanth Menon <[email protected]>

wkup_uart and main_uart1 on this platform is used by tifs and DM firmwares. Describe them for completeness including the pinmux.

[[email protected]: updated pinmux and commit subject]

---

Changes from v2: [1]
- Included the patch version to the $subject

Changes from v1: [0]
- Updated $subject to align with previous commits

[1] https://lore.kernel.org/lkml/[email protected]/
[0] https://lore.kernel.org/linux-devicetree/[email protected]/

 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 40 +++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +38 -2
index f6a67f072dca6..65caa5611d6d5 100644
@@ -17,7 +17,9 @@ / {
 	model = "Texas Instruments AM62A7 SK";
 
 	aliases {
+		serial0 = &wkup_uart0;
 		serial2 = &main_uart0;
+		serial3 = &main_uart1;
 		mmc1 = &sdhci1;
 	};
 
@@ -114,11 +116,38 @@ led-0 {
 	};
 };
 
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
+			AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
+			AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
+			AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
+		>;
+	};
+};
+
+/* WKUP UART0 is used for DM firmware logs */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+};
+
 &main_pmx0 {
 	main_uart0_pins_default: main-uart0-pins-default {
 		pinctrl-single,pins = <
-			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
-			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
+			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-pins-default {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
+			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
+			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
 		>;
 	};
 
@@ -254,6 +283,13 @@ &main_uart0 {
 	pinctrl-0 = <&main_uart0_pins_default>;
 };
 
+/* Main UART1 is used for TIFS firmware logs */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	status = "reserved";
+};
+
 &usbss1 {
 	status = "okay";
 };

base-commit: 891db0c48efb48c3af334006f9d7ea6a0aa49cb9

Signature · 1 line
2.40.0
maintainer Applied
#1 lore raw

Hi Bryan Brattlof,

Quoted 4 lines · Bryan Brattlof

wkup_uart and main_uart1 on this platform is used by tifs and DM firmwares. Describe them for completeness including the pinmux.

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

[1/1] arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart

      commit: bb73613b1670681afdfe0707522ee834e43df484

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh