firmware: stratix10-svc: Add command to get SEU error info
Subsystems (2)
PATCH 1/2 firmware: stratix10-svc: Add command to get SEU error info
From: Niravkumar L Rabara <[email protected]>
Introduce a new command to get Single Event Upset Error information.
Signed-off-by Niravkumar L Rabara <[email protected]>
--- include/linux/firmware/intel/stratix10-smc.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
include/linux/firmware/intel/stratix10-smc.h +20 -0
@@ -595,4 +595,24 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)#define INTEL_SIP_SMC_FCS_GET_PROVISION_DATA \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_GET_PROVISION_DATA) +/** +* Request INTEL_SIP_SMC_READ_SEU_ERR +* Sync call to get Single Event Upsate Error information +* SEU detects both corrected and uncorrected error +* +* Call register usage: +* a0 INTEL_SIP_SMC_READ_SEU_ERR +* a1-7 not used +* +* Return status: +* a0 INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_NOT_SUPPORTED or +* INTEL_SIP_SMC_STATUS_ERROR +* a1 error count of response data +* a2 sector address of response data +* a3 error data +*/ +#define INTEL_SIP_SMC_FUNCID_SEU_ERR_STATUS 143 +#define INTEL_SIP_SMC_READ_SEU_ERR \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_SEU_ERR_STATUS) +#endif
Signature · 1 line
2.25.1