hw/cxl: CDAT file handling fixes.
Jonathan Cameron via
Appliedcover hw/cxl: CDAT file handling fixes.
I've picked up Hao Zeng's v5 and added a patch to deal with the issues that Peter pointed out in this area.
On error, the CDAT file handling left resource dangling and didn't cleanly exit from calling functions. Hao Zeng dealt with closing the file. The second patch deals with the buffer allocation and ensuring a clean exit at the two callers.
Hao Zeng (1):
hw/cxl: cdat: Fix open file not closed in ct3_load_cdat()
Jonathan Cameron (1):
hw/cxl: cdat: Fix failure to free buffer in erorr paths
hw/cxl/cxl-cdat.c | 60 +++++++++++++++--------------------- hw/mem/cxl_type3.c | 4 +++ hw/pci-bridge/cxl_upstream.c | 3 ++ 3 files changed, 32 insertions(+), 35 deletions(-)
Signature · 1 line
2.37.2
PATCH 1/2 hw/cxl: cdat: Fix open file not closed in ct3_load_cdat()
From: Hao Zeng <[email protected]>
Open file descriptor not closed in error paths. Fix by replace open coded handling of read of whole file into a buffer with g_file_get_contents()
--
Changes since v5:
- Drop if guard on g_free() as per checkpatch warning.
--- hw/cxl/cxl-cdat.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-)
hw/cxl/cxl-cdat.c +8 -21
@@ -110,29 +110,18 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp) g_autofree CDATEntry *cdat_st = NULL;uint8_t sum =0 ;int num_ent; -int i =0 , ent =1 , file_size =0 ; +int i =0 , ent =1 ; +gsize file_size =0 ;CDATSubHeader *hdr; -FILE *fp =NULL ; +GError *error =NULL ;/* Read CDAT file and create its cache */ - fp =fopen (cdat->filename,"r" ); -if (!fp) { -error_setg (errp,"CDAT: Unable to open file" ); +if (!g_file_get_contents (cdat->filename, (gchar **)&cdat->buf, + &file_size, &error)) { +error_setg (errp,"CDAT: File read failed: %s" , error->message); +g_error_free (error);return ; } - -fseek (fp,0 ,SEEK_END ); - file_size =ftell (fp); -fseek (fp,0 ,SEEK_SET ); - cdat->buf =g_malloc0 (file_size); - -if (fread (cdat->buf, file_size,1 , fp) ==0 ) { -error_setg (errp,"CDAT: File read failed" ); -return ; - } - -fclose (fp); -if (file_size <sizeof (CDATTableHeader)) {error_setg (errp,"CDAT: File too short" );return ;
@@ -218,7 +207,5 @@ void cxl_doe_cdat_release(CXLComponentState *cxl_cstate) cdat->free_cdat_table (cdat->built_buf, cdat->built_buf_len, cdat->private); } -if (cdat->buf) { -free (cdat->buf); - } +g_free (cdat->buf); }
Signature · 1 line
2.37.2
Re: [PATCH 1/2] hw/cxl: cdat: Fix open file not closed in ct3_load_cdat()
Quoted 6 lines · Jonathan Cameron via
From: Hao Zeng <[email protected]>
Open file descriptor not closed in error paths. Fix by replace open coded handling of read of whole file into a buffer with
g_file_get_contents()
Quoted 7 lines
Fixes aba578bdac ("hw/cxl: CDAT Data Object Exchange implementation")Signed-off-by Zeng Hao <[email protected]>Suggested-by Philippe Mathieu-Daudé <[email protected]>Suggested-by Peter Maydell <[email protected]>Suggested-by Jonathan Cameron via <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>
Quoted 62 lines
--
Changes since v5:
- Drop if guard ong_free()as per checkpatch warning.--- hw/cxl/cxl-cdat.c | 29 ++++++++--------------------- 1 file changed, 8 insertions(+), 21 deletions(-)hw/cxl/cxl-cdat.c +8
-21@@ -110,29 +110,18 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp) g_autofree CDATEntry *cdat_st = NULL;uint8_t sum =0 ;int num_ent; -int i =0 , ent =1 , file_size =0 ; +int i =0 , ent =1 ; +gsize file_size =0 ;CDATSubHeader *hdr; -FILE *fp =NULL ; +GError *error =NULL ;/* Read CDAT file and create its cache */ - fp =fopen (cdat->filename,"r" ); -if (!fp) { -error_setg (errp,"CDAT: Unable to open file" ); +if (!g_file_get_contents (cdat->filename, (gchar **)&cdat->buf, + &file_size, &error)) { +error_setg (errp,"CDAT: File read failed: %s" , error->message); +g_error_free (error);return ; } - -fseek (fp,0 ,SEEK_END ); - file_size =ftell (fp); -fseek (fp,0 ,SEEK_SET ); - cdat->buf =g_malloc0 (file_size); - -if (fread (cdat->buf, file_size,1 , fp) ==0 ) { -error_setg (errp,"CDAT: File read failed" ); -return ; - } - -fclose (fp); -if (file_size <sizeof (CDATTableHeader)) {error_setg (errp,"CDAT: File too short" );return ;@@ -218,7 +207,5 @@ void cxl_doe_cdat_release(CXLComponentState *cxl_cstate) cdat->free_cdat_table (cdat->built_buf, cdat->built_buf_len, cdat->private); } -if (cdat->buf) { -free (cdat->buf); - } +g_free (cdat->buf); }Signature · 1 line
2.37.2
PATCH 2/2 hw/cxl: cdat: Fix failure to free buffer in erorr paths
In reply to Jonathan Cameron viaThe failure paths in CDAT file loading did not clear up properly. Change to using g_auto_free and a local pointer for the buffer to ensure this function has no side effects on error.
Also drop some unnecessary checks that can not fail.
Cleanup properly after a failure to load a CDAT file.
--- hw/cxl/cxl-cdat.c | 33 ++++++++++++++++++--------------- hw/mem/cxl_type3.c | 4 ++++ hw/pci-bridge/cxl_upstream.c | 3 +++ 3 files changed, 25 insertions(+), 15 deletions(-)
hw/cxl/cxl-cdat.c +18 -15
@@ -108,6 +108,7 @@ static void ct3_build_cdat(CDATObject *cdat, Error **errp)static void ct3_load_cdat (CDATObject *cdat,Error **errp) { g_autofree CDATEntry *cdat_st = NULL; + g_autofree char *buf = NULL;uint8_t sum =0 ;int num_ent;int i =0 , ent =1 ;
@@ -116,7 +117,7 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp)GError *error =NULL ;/* Read CDAT file and create its cache */ -if (!g_file_get_contents (cdat->filename, (gchar **)&cdat->buf, +if (!g_file_get_contents (cdat->filename, (gchar **)&buf, &file_size, &error)) {error_setg (errp,"CDAT: File read failed: %s" , error->message);g_error_free (error);
@@ -129,9 +130,17 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp) i =sizeof (CDATTableHeader); num_ent =1 ;while (i < file_size) { - hdr = (CDATSubHeader *)(cdat->buf + i); + hdr = (CDATSubHeader *)(buf + i); +if (i +sizeof (CDATSubHeader) > file_size) { +error_setg (errp,"CDAT: Truncated table" ); +return ; + }cdat_len_check (hdr, errp); i += hdr->length; +if (i > file_size) { +error_setg (errp,"CDAT: Truncated table" ); +return ; + } num_ent++; }if (i != file_size) {
@@ -139,33 +148,26 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp)return ; } - cdat_st =g_malloc0 (sizeof (*cdat_st) * num_ent); -if (!cdat_st) { -error_setg (errp,"CDAT: Failed to allocate entry array" ); -return ; - } + cdat_st =g_new0 (CDATEntry, num_ent);/* Set CDAT header, Entry = 0 */ - cdat_st[0 ].base = cdat->buf; + cdat_st[0 ].base = buf; cdat_st[0 ].length =sizeof (CDATTableHeader); i =0 ;while (i < cdat_st[0 ].length) { - sum += cdat->buf[i++]; + sum += buf[i++]; }/* Read CDAT structures */ while (i < file_size) { - hdr = (CDATSubHeader *)(cdat->buf + i); -cdat_len_check (hdr, errp); - + hdr = (CDATSubHeader *)(buf + i); cdat_st[ent].base = hdr; cdat_st[ent].length = hdr->length; -while (cdat->buf + i < - (uint8_t *)cdat_st[ent].base + cdat_st[ent].length) { +while (buf + i < (char *)cdat_st[ent].base + cdat_st[ent].length) {assert (i < file_size); - sum += cdat->buf[i++]; + sum += buf[i++]; } ent++;
@@ -176,6 +178,7 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp) } cdat->entry_len = num_ent; cdat->entry =g_steal_pointer (&cdat_st); + cdat->buf =g_steal_pointer (&buf); }void cxl_doe_cdat_init (CXLComponentState *cxl_cstate,Error **errp)
hw/mem/cxl_type3.c +4 -0
@@ -593,6 +593,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp) cxl_cstate->cdat.free_cdat_table = ct3_free_cdat_table; cxl_cstate->cdat.private = ct3d;cxl_doe_cdat_init (cxl_cstate, errp); +if (*errp) { + goto err_free_special_ops; + }pcie_cap_deverr_init (pci_dev);/* Leave a bit of room for expansion */
@@ -605,6 +608,7 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp) err_release_cdat:cxl_doe_cdat_release (cxl_cstate); +err_free_special_ops:g_free (regs->special_ops); err_address_space_free:address_space_destroy (&ct3d->hostmem_as);
hw/pci-bridge/cxl_upstream.c +3 -0
@@ -346,6 +346,9 @@ static void cxl_usp_realize(PCIDevice *d, Error **errp) cxl_cstate->cdat.free_cdat_table = free_default_cdat_table; cxl_cstate->cdat.private = d;cxl_doe_cdat_init (cxl_cstate, errp); +if (*errp) { + goto err_cap; + }return ;
Signature · 1 line
2.37.2
Re: [PATCH 2/2] hw/cxl: cdat: Fix failure to free buffer in erorr paths
Quoted 9 lines · Jonathan Cameron via
The failure paths in CDAT file loading did not clear up properly. Change to using
g_auto_freeand a local pointer for the buffer to ensure this function has no side effects on error.
Also drop some unnecessary checks that can not fail.Cleanup properly after a failure to load a CDAT file.
Suggested-by Peter Maydell <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>
Quoted 135 lines
--- hw/cxl/cxl-cdat.c | 33 ++++++++++++++++++--------------- hw/mem/cxl_type3.c | 4 ++++ hw/pci-bridge/cxl_upstream.c | 3 +++ 3 files changed, 25 insertions(+), 15 deletions(-)hw/cxl/cxl-cdat.c +18
-15@@ -108,6 +108,7 @@ static void ct3_build_cdat(CDATObject *cdat, Error **errp)static void ct3_load_cdat (CDATObject *cdat,Error **errp) { g_autofree CDATEntry *cdat_st = NULL; + g_autofree char *buf = NULL;uint8_t sum =0 ;int num_ent;int i =0 , ent =1 ;@@ -116,7 +117,7 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp)GError *error =NULL ;/* Read CDAT file and create its cache */ -if (!g_file_get_contents (cdat->filename, (gchar **)&cdat->buf, +if (!g_file_get_contents (cdat->filename, (gchar **)&buf, &file_size, &error)) {error_setg (errp,"CDAT: File read failed: %s" , error->message);g_error_free (error);@@ -129,9 +130,17 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp) i =sizeof (CDATTableHeader); num_ent =1 ;while (i < file_size) { - hdr = (CDATSubHeader *)(cdat->buf + i); + hdr = (CDATSubHeader *)(buf + i); +if (i +sizeof (CDATSubHeader) > file_size) { +error_setg (errp,"CDAT: Truncated table" ); +return ; + }cdat_len_check (hdr, errp); i += hdr->length; +if (i > file_size) { +error_setg (errp,"CDAT: Truncated table" ); +return ; + } num_ent++; }if (i != file_size) {@@ -139,33 +148,26 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp)return ; } - cdat_st =g_malloc0 (sizeof (*cdat_st) * num_ent); -if (!cdat_st) { -error_setg (errp,"CDAT: Failed to allocate entry array" ); -return ; - } + cdat_st =g_new0 (CDATEntry, num_ent);/* Set CDAT header, Entry = 0 */ - cdat_st[0 ].base = cdat->buf; + cdat_st[0 ].base = buf; cdat_st[0 ].length =sizeof (CDATTableHeader); i =0 ;while (i < cdat_st[0 ].length) { - sum += cdat->buf[i++]; + sum += buf[i++]; }/* Read CDAT structures */ while (i < file_size) { - hdr = (CDATSubHeader *)(cdat->buf + i); -cdat_len_check (hdr, errp); - + hdr = (CDATSubHeader *)(buf + i); cdat_st[ent].base = hdr; cdat_st[ent].length = hdr->length; -while (cdat->buf + i < - (uint8_t *)cdat_st[ent].base + cdat_st[ent].length) { +while (buf + i < (char *)cdat_st[ent].base + cdat_st[ent].length) {assert (i < file_size); - sum += cdat->buf[i++]; + sum += buf[i++]; } ent++;@@ -176,6 +178,7 @@ static void ct3_load_cdat(CDATObject *cdat, Error **errp) } cdat->entry_len = num_ent; cdat->entry =g_steal_pointer (&cdat_st); + cdat->buf =g_steal_pointer (&buf); }void cxl_doe_cdat_init (CXLComponentState *cxl_cstate,Error **errp)hw/mem/cxl_type3.c +4
-0@@ -593,6 +593,9 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp) cxl_cstate->cdat.free_cdat_table = ct3_free_cdat_table; cxl_cstate->cdat.private = ct3d;cxl_doe_cdat_init (cxl_cstate, errp); +if (*errp) { + goto err_free_special_ops; + }pcie_cap_deverr_init (pci_dev);/* Leave a bit of room for expansion */ @@ -605,6 +608,7 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp) err_release_cdat:cxl_doe_cdat_release (cxl_cstate); +err_free_special_ops:g_free (regs->special_ops); err_address_space_free:address_space_destroy (&ct3d->hostmem_as);hw/pci-bridge/cxl_upstream.c +3
-0@@ -346,6 +346,9 @@ static void cxl_usp_realize(PCIDevice *d, Error **errp) cxl_cstate->cdat.free_cdat_table = free_default_cdat_table; cxl_cstate->cdat.private = d;cxl_doe_cdat_init (cxl_cstate, errp); +if (*errp) { + goto err_cap; + }return ;Signature · 1 line
2.37.2
Quoted 11 lines · Jonathan Cameron via
I've picked up Hao Zeng's v5 and added a patch to deal with the issues that Peter pointed out in this area.
On error, the CDAT file handling left resource dangling and didn't cleanly exit from calling functions. Hao Zeng dealt with closing the file. The second patch deals with the buffer allocation and ensuring a clean exit at the two callers.
Hao Zeng (1):
hw/cxl: cdat: Fix open file not closed inct3_load_cdat()
Quoted 7 lines
Jonathan Cameron (1):
hw/cxl: cdat: Fix failure to free buffer in erorr pathshw/cxl/cxl-cdat.c | 60 +++++++++++++++--------------------- hw/mem/cxl_type3.c | 4 +++ hw/pci-bridge/cxl_upstream.c | 3 ++ 3 files changed, 32 insertions(+), 35 deletions(-)
Hi!
Is it a stable (8.0 & 7.2) material?
The issues does not seem to be very important, still smells like a good thing to have in -stable.
Thanks,
/mjt
Quoted 20 lines · On Sat, 20 May 2023 07:46:16 +0300 Michael Tokarev <[email protected]> wrote:
Quoted 11 lines · Jonathan Cameron via
I've picked up Hao Zeng's v5 and added a patch to deal with the issues that Peter pointed out in this area.
On error, the CDAT file handling left resource dangling and didn't cleanly exit from calling functions. Hao Zeng dealt with closing the file. The second patch deals with the buffer allocation and ensuring a clean exit at the two callers.
Hao Zeng (1):
hw/cxl: cdat: Fix open file not closed inct3_load_cdat()Quoted 7 lines
Jonathan Cameron (1):
hw/cxl: cdat: Fix failure to free buffer in erorr pathshw/cxl/cxl-cdat.c | 60 +++++++++++++++--------------------- hw/mem/cxl_type3.c | 4 +++ hw/pci-bridge/cxl_upstream.c | 3 ++ 3 files changed, 32 insertions(+), 35 deletions(-)
Quoted 5 lines
Hi!
Is it a stable (8.0 & 7.2) material?
The issues does not seem to be very important, still smells like a good thing to have in -stable.
Issues are leaks only on an error path, so I'd say no for stable. If others disagree these should be harmless.
Jonathan
Quoted 5 lines
Thanks,
/mjt