dt-bindings: mfd: gateworks-gsc: remove unnecessary fan-controller nodes
PATCH v2 1/4 dt-bindings: mfd: gateworks-gsc: remove unnecessary fan-controller nodes
Remove the unnecessary #address-cells and #size-cells nodes from the fan-controller. These are not needed as the fan controller does not have any children.
---
v2:
- udpated commit log to explain why the nodes are unnessesary
- added Krzysztof's rb tag
- added Connor's ab tag
--- .../devicetree/bindings/mfd/gateworks-gsc.yaml | 10 ---------- 1 file changed, 10 deletions(-)
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +0 -10
@@ -122,12 +122,6 @@ patternProperties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1
@@ -135,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible
@@ -194,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; };
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 2/4 arm64: dts: imx8mm-venice-gw700x: remove invalid props from fan-controller
Remove the invalid #address-cells and #size-cells nodes from the fan-controller.
---
v2: update commit log
--- arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +0 -2
@@ -234,8 +234,6 @@ channel@a2 { }; fan-controller@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x0a>; };
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 2/4] arm64: dts: imx8mm-venice-gw700x: remove invalid props from fan-controller
Quoted 4 lines · Tim Harvey
Remove the invalid #address-cells and #size-cells nodes from the fan-controller.
Signed-off-by Tim Harvey <[email protected]>
Applied 2/4, 3/4 and 4/4, thanks!
PATCH v2 3/4 ARM: dts: imx6qdl-gw54xx: remove invalid nodes from fan-controller
In reply to Tim HarveyRemove the invalid #address-cells and #size-cells nodes from the fan-controller.
---
v2: new patch
--- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +0 -2
@@ -349,8 +349,6 @@ channel@26 { fan-controller@2c { compatible = "gw,gsc-fan"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x2c>; }; };
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 4/4 ARM: dts: imx6qdl-gw5912: remove invalid nodes from fan-controller
In reply to Tim HarveyRemove the invalid #address-cells and #size-cells nodes from the fan-controller.
---
v2: new patch
--- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-gw5912.dtsi +0 -2
@@ -243,8 +243,6 @@ channel@23 { fan-controller@a { compatible = "gw,gsc-fan"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x0a>; }; };
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Rob Herring
maintainerQuoted 7 lines · Tim Harvey
Remove the unnecessary #address-cells and #size-cells nodes from the fan-controller. These are not needed as the fan controller does not have any children.
Signed-off-by Tim Harvey <[email protected]>Acked-by Conor Dooley <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>
Quoted 8 lines
---
v2:
- udpated commit log to explain why the nodes are unnessesary
- added Krzysztof's rb tag
- added Connor's ab tag--- .../devicetree/bindings/mfd/gateworks-gsc.yaml | 10 ---------- 1 file changed, 10 deletions(-)
This is not going to get applied if you don't send it to Lee.
Quoted 39 lines
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +0
-10@@ -122,12 +122,6 @@ patternProperties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1@@ -135,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible@@ -194,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; };Signature · 1 line
2.25.1
Quoted 18 lines · Rob Herring
Quoted 7 lines · Tim Harvey
Remove the unnecessary #address-cells and #size-cells nodes from the fan-controller. These are not needed as the fan controller does not have any children.
Signed-off-by Tim Harvey <[email protected]>Acked-by Conor Dooley <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>Quoted 8 lines
---
v2:
- udpated commit log to explain why the nodes are unnessesary
- added Krzysztof's rb tag
- added Connor's ab tag--- .../devicetree/bindings/mfd/gateworks-gsc.yaml | 10 ---------- 1 file changed, 10 deletions(-)
Quoted 1 line
This is not going to get applied if you don't send it to Lee.
Lee,
Sorry, I missed adding you to this thread. Can you pick it up or do you need me to re-send to the list and you?
Best Regards,
Tim
Quoted 40 lines
Quoted 40 lines
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml +0
-11@@ -122,12 +122,6 @@ patternProperties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1@@ -135,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible@@ -194,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; }; --2.25.1
Lee Jones
maintainerQuoted 19 lines · Tim Harvey
Quoted 18 lines · Rob Herring
Quoted 15 lines · Tim Harvey
Remove the unnecessary #address-cells and #size-cells nodes from the fan-controller. These are not needed as the fan controller does not have any children.
Signed-off-by Tim Harvey <[email protected]>Acked-by Conor Dooley <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>---
v2:
- udpated commit log to explain why the nodes are unnessesary
- added Krzysztof's rb tag
- added Connor's ab tag--- .../devicetree/bindings/mfd/gateworks-gsc.yaml | 10 ---------- 1 file changed, 10 deletions(-)
Quoted 6 lines
Quoted 1 line
This is not going to get applied if you don't send it to Lee.
Lee,
Sorry, I missed adding you to this thread. Can you pick it up or do you need me to re-send to the list and you?
I need you to resend it please.
Signature · 1 line
Lee Jones [李琼斯]