arm: mach-k3: j7200: Add main_uart1 device and clock data
Subsystems (2)
cover arm: mach-k3: j7200: Add main_uart1 device and clock data
Add device data and clock data for main_uart1 for J7200 SoC so that main_uart1 will be powered on and its clock will be set up while booting the J7200 SoC.
Bhavya Kapoor (2):
arm: mach-k3: j7200: dev-data.c: Add main_uart1 device data
arm: mach-k3: j7200: clk-data.c: Add main_uart1 clock data
arch/arm/mach-k3/j7200/clk-data.c | 7 +++++-- arch/arm/mach-k3/j7200/dev-data.c | 3 ++- 2 files changed, 7 insertions(+), 3 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/2 arm: mach-k3: j7200: dev-data.c: Add main_uart1 device data
Add device data for main_uart1 in dev-data.c for J7200. Now, main_uart1 will be powered on while booting the J7200 SoC.
--- arch/arm/mach-k3/j7200/dev-data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-k3/j7200/dev-data.c +2 -1
@@ -53,6 +53,7 @@ static struct ti_dev soc_dev_list[] = {PSC_DEV (92 , &soc_lpsc_list[5 ]),PSC_DEV (91 , &soc_lpsc_list[6 ]),PSC_DEV (146 , &soc_lpsc_list[7 ]), +PSC_DEV (278 , &soc_lpsc_list[7 ]),PSC_DEV (4 , &soc_lpsc_list[8 ]),PSC_DEV (4 , &soc_lpsc_list[9 ]), PSC_DEV(202, &soc_lpsc_list[10]),
@@ -77,5 +78,5 @@ const struct ti_k3_pd_platdata j7200_pd_platdata = { .num_psc = 2, .num_pd = 6, .num_lpsc = 17, - .num_devs = 22, + .num_devs = 23, };
Signature · 1 line
2.34.1
Re: [PATCH 1/2] arm: mach-k3: j7200: dev-data.c: Add main_uart1 device data
Quoted 4 lines · Bhavya Kapoor
Add device data for
main_uart1indev-data.cfor J7200. Now,main_uart1will be powered on while booting the J7200 SoC.Signed-off-by Bhavya Kapoor <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom
PATCH 2/2 arm: mach-k3: j7200: clk-data.c: Add main_uart1 clock data
In reply to Bhavya KapoorAdd main_uart1 clocks in clk-data.c for J7200. Now, main_uart1 clocks will be set up while booting the J7200 SoC.
--- arch/arm/mach-k3/j7200/clk-data.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
arch/arm/mach-k3/j7200/clk-data.c +5 -2
@@ -379,6 +379,7 @@ static const struct clk_data clk_list[] = {CLK_MUX ("main_pll4_xref_sel_out0" , main_pll4_xref_sel_out0_parents,2 ,0x43008090 ,4 ,1 ,0 ),CLK_MUX ("mcu_clkout_mux_out0" , mcu_clkout_mux_out0_parents,2 ,0x40f08010 ,0 ,1 ,0 ),CLK_DIV_DEFFREQ ("usart_programmable_clock_divider_out0" ,"hsdiv4_16fft_main_1_hsdivout0_clk" ,0x1081c0 ,0 ,2 ,0 ,0 ,48000000 ), +CLK_DIV_DEFFREQ ("usart_programmable_clock_divider_out1" ,"hsdiv4_16fft_main_1_hsdivout0_clk" ,0x1081c4 ,0 ,2 ,0 ,0 ,48000000 ),CLK_DIV ("hsdiv0_16fft_main_12_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_12_foutvcop_clk" ,0x68c080 ,0 ,7 ,0 ,0 ),CLK_DIV ("hsdiv0_16fft_main_7_hsdivout0_clk" ,"pllfracf_ssmod_16fft_main_7_foutvcop_clk" ,0x687080 ,0 ,7 ,0 ,0 ), CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfracf_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0, 0),
@@ -534,6 +535,8 @@ static const struct dev_clk soc_dev_clk_data[] = {DEV_CLK (197 ,2 ,"k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk" ),DEV_CLK (202 ,2 ,"hsdiv0_16fft_main_8_hsdivout0_clk" ),DEV_CLK (203 ,0 ,"hsdiv0_16fft_main_8_hsdivout0_clk" ), +DEV_CLK (278 ,2 ,"usart_programmable_clock_divider_out1" ), +DEV_CLK (278 ,3 ,"k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk" ),DEV_CLK (288 ,3 ,"postdiv2_16fft_main_1_hsdivout7_clk" ),DEV_CLK (288 ,4 ,"k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk" ), DEV_CLK(288, 6, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
@@ -546,7 +549,7 @@ static const struct dev_clk soc_dev_clk_data[] = {const struct ti_k3_clk_platdata j7200_clk_platdata = { .clk_list = clk_list, - .clk_list_cnt =108 , + .clk_list_cnt =109 , .soc_dev_clk_data = soc_dev_clk_data, - .soc_dev_clk_data_cnt =127 , + .soc_dev_clk_data_cnt =129 , };
Signature · 1 line
2.34.1
Re: [PATCH 2/2] arm: mach-k3: j7200: clk-data.c: Add main_uart1 clock data
Quoted 4 lines · Bhavya Kapoor
Add
main_uart1clocks inclk-data.cfor J7200. Now,main_uart1clocks will be set up while booting the J7200 SoC.Signed-off-by Bhavya Kapoor <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom