Skip to contentSkip to conversation

arm: mach-k3: j7200: Add main_uart1 device and clock data

PATCH In review Bhavya Kapoor 2 participants 5 messages May 12, 2023 – Jun 1, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover arm: mach-k3: j7200: Add main_uart1 device and clock data

Add device data and clock data for main_uart1 for J7200 SoC so that main_uart1 will be powered on and its clock will be set up while booting the J7200 SoC.

Bhavya Kapoor (2):
arm: mach-k3: j7200: dev-data.c: Add main_uart1 device data
arm: mach-k3: j7200: clk-data.c: Add main_uart1 clock data

 arch/arm/mach-k3/j7200/clk-data.c | 7 +++++--
 arch/arm/mach-k3/j7200/dev-data.c | 3 ++-
 2 files changed, 7 insertions(+), 3 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/2 arm: mach-k3: j7200: dev-data.c: Add main_uart1 device data

Add device data for main_uart1 in dev-data.c for J7200. Now, main_uart1 will be powered on while booting the J7200 SoC.

---
 arch/arm/mach-k3/j7200/dev-data.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-k3/j7200/dev-data.c +2 -1
index d3194ae51a..c1a4dab694 100644
@@ -53,6 +53,7 @@ static struct ti_dev soc_dev_list[] = {
 	PSC_DEV(92, &soc_lpsc_list[5]),
 	PSC_DEV(91, &soc_lpsc_list[6]),
 	PSC_DEV(146, &soc_lpsc_list[7]),
+	PSC_DEV(278, &soc_lpsc_list[7]),
 	PSC_DEV(4, &soc_lpsc_list[8]),
 	PSC_DEV(4, &soc_lpsc_list[9]),
 	PSC_DEV(202, &soc_lpsc_list[10]),
@@ -77,5 +78,5 @@ const struct ti_k3_pd_platdata j7200_pd_platdata = {
 	.num_psc = 2,
 	.num_pd = 6,
 	.num_lpsc = 17,
-	.num_devs = 22,
+	.num_devs = 23,
 };
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH 1/2] arm: mach-k3: j7200: dev-data.c: Add main_uart1 device data

Quoted 4 lines · Bhavya Kapoor

Add device data for main_uart1 in dev-data.c for J7200. Now, main_uart1 will be powered on while booting the J7200 SoC.

Applied to u-boot/next, thanks!

Signature · 1 line
Tom
#3 lore raw

PATCH 2/2 arm: mach-k3: j7200: clk-data.c: Add main_uart1 clock data

In reply to Bhavya Kapoor

Add main_uart1 clocks in clk-data.c for J7200. Now, main_uart1 clocks will be set up while booting the J7200 SoC.

---
 arch/arm/mach-k3/j7200/clk-data.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
arch/arm/mach-k3/j7200/clk-data.c +5 -2
index 0437e30abb..9b45786a2d 100644
@@ -379,6 +379,7 @@ static const struct clk_data clk_list[] = {
 	CLK_MUX("main_pll4_xref_sel_out0", main_pll4_xref_sel_out0_parents, 2, 0x43008090, 4, 1, 0),
 	CLK_MUX("mcu_clkout_mux_out0", mcu_clkout_mux_out0_parents, 2, 0x40f08010, 0, 1, 0),
 	CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 0, 48000000),
+	CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out1", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c4, 0, 2, 0, 0, 48000000),
 	CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0, 0),
 	CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfracf_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0, 0),
 	CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfracf_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0, 0),
@@ -534,6 +535,8 @@ static const struct dev_clk soc_dev_clk_data[] = {
 	DEV_CLK(197, 2, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
 	DEV_CLK(202, 2, "hsdiv0_16fft_main_8_hsdivout0_clk"),
 	DEV_CLK(203, 0, "hsdiv0_16fft_main_8_hsdivout0_clk"),
+	DEV_CLK(278, 2, "usart_programmable_clock_divider_out1"),
+	DEV_CLK(278, 3, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
 	DEV_CLK(288, 3, "postdiv2_16fft_main_1_hsdivout7_clk"),
 	DEV_CLK(288, 4, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
 	DEV_CLK(288, 6, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
@@ -546,7 +549,7 @@ static const struct dev_clk soc_dev_clk_data[] = {
 
 const struct ti_k3_clk_platdata j7200_clk_platdata = {
 	.clk_list = clk_list,
-	.clk_list_cnt = 108,
+	.clk_list_cnt = 109,
 	.soc_dev_clk_data = soc_dev_clk_data,
-	.soc_dev_clk_data_cnt = 127,
+	.soc_dev_clk_data_cnt = 129,
 };
Signature · 1 line
2.34.1
#4 lore raw

Re: [PATCH 2/2] arm: mach-k3: j7200: clk-data.c: Add main_uart1 clock data

Quoted 4 lines · Bhavya Kapoor

Add main_uart1 clocks in clk-data.c for J7200. Now, main_uart1 clocks will be set up while booting the J7200 SoC.

Applied to u-boot/next, thanks!

Signature · 1 line
Tom