Skip to contentSkip to conversation

arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq

PATCH Applied Tim Harvey 3 participants 5 messages Jun 6, 2023 – Jul 17, 2023

Subsystems (2)
lore
Share & tools
lore

Tim Harvey

author
#0 lore raw

PATCH 1/1 arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq

Add regulator config for cpu-supply in order to support cpufreq.

---
 .../dts/freescale/imx8mm-venice-gw7901.dts     | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +17 -1
index df3b2c93d2d5..d022b5807a24 100644
@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi {
 	};
 };
 
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
 
@@ -511,7 +527,7 @@ BUCK1 {
 			};
 
 			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
-			BUCK2 {
+			buck2: BUCK2 {
 				regulator-name = "buck2";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
Signature · 1 line
2.25.1
author
#1 lore raw
Quoted 45 lines · Tim Harvey

Add regulator config for cpu-supply in order to support cpufreq.

---
 .../dts/freescale/imx8mm-venice-gw7901.dts     | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +17 -2
index df3b2c93d2d5..d022b5807a24 100644
@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi {
        };
 };
 
+&A53_0 {
+       cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+       cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+       cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+       cpu-supply = <&buck2>;
+};
+
 &ddrc {
        operating-points-v2 = <&ddrc_opp_table>;
 
@@ -511,7 +527,7 @@ BUCK1 {
                        };
 
                        /* vdd_arm: 0.805-1.0V (typ=0.9V) */
-                       BUCK2 {
+                       buck2: BUCK2 {
                                regulator-name = "buck2";
                                regulator-min-microvolt = <700000>;
                                regulator-max-microvolt = <1300000>;
--
Quoted 2 lines

2.25.1

Hi Shawn,

I noticed this and several other of my pending patches delegated to you got marked as 'archived' and no longer appear as new in my patchwork queue [1]. I wanted to make sure they are still in your queue or see if I need to resubmit them. I'm not sure what the process is that you follow and if they got archived by you or something else. Please let me know if I need to do anything:

arm64: dts: imx8mm: add imx8mm-venice-gw73xx-0x-rpidsi overlay for display
arm64: dts: freescale: fix imx8mm-venice-gw72xx-0x-imx219 overlay
arm64: dts: freescale: Introduce imx8mp-venice-gw73xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW73xx-2x board
arm64: dts: freescale: Introduce imx8mp-venice-gw72xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW72xx-2x board
arm64: dts: freescale: Introduce imx8mp-venice-gw71xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW71xx-2x board
arm64: dts: freescale: Introduce imx8mm-venice-gw7905-0x
dt-bindings: arm: Add Gateworks i.MX8M GW7905-0x board
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7904: enable UART1 hardware flow control
arm64: dts: imx8m{m,n}-venice-gw7902: add SDR50/SDR104 SDIO support for wifi
arm64: dts: imx8mm-venice-gw7901: add SDR50/SDR104 SDIO support for wifi
arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq
arm64: dts: imx8mp-venice-gw74xx: update to revB PCB

best regards,

Tim
[1] https://patchwork.kernel.org/project/linux-arm-kernel/list/?submitter=75211

#2 lore raw
Quoted 51 lines · Tim Harvey
Quoted 45 lines · Tim Harvey

Add regulator config for cpu-supply in order to support cpufreq.

---
 .../dts/freescale/imx8mm-venice-gw7901.dts     | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +17 -2
index df3b2c93d2d5..d022b5807a24 100644
@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi {
        };
 };
 
+&A53_0 {
+       cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+       cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+       cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+       cpu-supply = <&buck2>;
+};
+
 &ddrc {
        operating-points-v2 = <&ddrc_opp_table>;
 
@@ -511,7 +527,7 @@ BUCK1 {
                        };
 
                        /* vdd_arm: 0.805-1.0V (typ=0.9V) */
-                       BUCK2 {
+                       buck2: BUCK2 {
                                regulator-name = "buck2";
                                regulator-min-microvolt = <700000>;
                                regulator-max-microvolt = <1300000>;
--
Quoted 2 lines

2.25.1

Hi Shawn,

Quoted 6 lines

I noticed this and several other of my pending patches delegated to you got marked as 'archived' and no longer appear as new in my patchwork queue [1]. I wanted to make sure they are still in your queue or see if I need to resubmit them. I'm not sure what the process is that you follow and if they got archived by you or something else. Please let me know if I need to do anything:

I do not use patchwork, so it doesn't reflect any status on my side.

Shawn

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel