arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq
Add regulator config for cpu-supply in order to support cpufreq.
--- .../dts/freescale/imx8mm-venice-gw7901.dts | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +17 -1
@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi { }; }; +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>;
@@ -511,7 +527,7 @@ BUCK1 { }; /* vdd_arm: 0.805-1.0V (typ=0.9V) */ - BUCK2 { + buck2: BUCK2 { regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>;
Signature · 1 line
2.25.1
Quoted 45 lines · Tim Harvey
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by Tim Harvey <[email protected]>--- .../dts/freescale/imx8mm-venice-gw7901.dts | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +17
-2@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi { }; }; +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>;@@ -511,7 +527,7 @@ BUCK1 { }; /* vdd_arm: 0.805-1.0V (typ=0.9V) */ - BUCK2 { + buck2: BUCK2 { regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; --
Quoted 2 lines
2.25.1
Hi Shawn,
I noticed this and several other of my pending patches delegated to you got marked as 'archived' and no longer appear as new in my patchwork queue [1]. I wanted to make sure they are still in your queue or see if I need to resubmit them. I'm not sure what the process is that you follow and if they got archived by you or something else. Please let me know if I need to do anything:
arm64: dts: imx8mm: add imx8mm-venice-gw73xx-0x-rpidsi overlay for display
arm64: dts: freescale: fix imx8mm-venice-gw72xx-0x-imx219 overlay
arm64: dts: freescale: Introduce imx8mp-venice-gw73xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW73xx-2x board
arm64: dts: freescale: Introduce imx8mp-venice-gw72xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW72xx-2x board
arm64: dts: freescale: Introduce imx8mp-venice-gw71xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW71xx-2x board
arm64: dts: freescale: Introduce imx8mm-venice-gw7905-0x
dt-bindings: arm: Add Gateworks i.MX8M GW7905-0x board
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7904: enable UART1 hardware flow control
arm64: dts: imx8m{m,n}-venice-gw7902: add SDR50/SDR104 SDIO support for wifi
arm64: dts: imx8mm-venice-gw7901: add SDR50/SDR104 SDIO support for wifi
arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq
arm64: dts: imx8mp-venice-gw74xx: update to revB PCB
best regards,
Tim
[1] https://patchwork.kernel.org/project/linux-arm-kernel/list/?submitter=75211
Quoted 51 lines · Tim Harvey
Quoted 45 lines · Tim Harvey
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by Tim Harvey <[email protected]>--- .../dts/freescale/imx8mm-venice-gw7901.dts | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +17
-2@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi { }; }; +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>;@@ -511,7 +527,7 @@ BUCK1 { }; /* vdd_arm: 0.805-1.0V (typ=0.9V) */ - BUCK2 { + buck2: BUCK2 { regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; --Quoted 2 lines
2.25.1
Hi Shawn,
Quoted 6 lines
I noticed this and several other of my pending patches delegated to you got marked as 'archived' and no longer appear as new in my patchwork queue [1]. I wanted to make sure they are still in your queue or see if I need to resubmit them. I'm not sure what the process is that you follow and if they got archived by you or something else. Please let me know if I need to do anything:
I do not use patchwork, so it doesn't reflect any status on my side.
Shawn
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 3 lines · Tim Harvey
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by Tim Harvey<[email protected]>
LGTM:
Shawn Guo
AppliedQuoted 3 lines · Tim Harvey
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by Tim Harvey <[email protected]>
Applied, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel