Skip to contentSkip to conversation

usb: gadget: udc: core: Offload usb_udc_vbus_handler processing

PATCH In review Badhri Jagan Sridharan 2 participants 3 messages Jun 9, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v8 1/2 usb: gadget: udc: core: Offload usb_udc_vbus_handler processing

usb_udc_vbus_handler() can be invoked from interrupt context by irq handlers of the gadget drivers, however, usb_udc_connect_control() has to run in non-atomic context due to the following:
a. Some of the gadget driver implementations expect the ->pullup
callback to be invoked in non-atomic context.
b. usb_gadget_disconnect() acquires udc_lock which is a mutex.

Hence offload invocation of usb_udc_connect_control() to workqueue.

UDC should not be pulled up unless gadget driver is bound. The new flag "allow_connect" is now set by gadget_bind_driver() and cleared by gadget_unbind_driver(). This prevents work item to pull up the gadget even if queued when the gadget driver is already unbound.

Fixes 1016fc0c096c ("USB: gadget: Fix obscure lockdep violation for udc_mutex")

---
Changes since v1:
- Address Alan Stern's comment on usb_udc_vbus_handler invocation from atomic context:
* vbus_events_lock is now a spinlock and allocations in
* usb_udc_vbus_handler are atomic now.

Changes since v2:
- Addressing Alan Stern's comments:
** connect_lock is now held by callers of
* usb_gadget_pullup_update_locked() and gadget_(un)bind_driver() does
* notdirectly hold the lock.

** Both usb_gadget_(dis)connect() and usb_udc_vbus_handler() would
* set/clear udc->vbus and invoke usb_gadget_pullup_update_locked.

** Add "unbinding" to prevent new connections after the gadget is being
* unbound.

Changes since v3:
** Made a minor cleanup which I missed to do in v3 in
* usb_udc_vbus_handler().

Changes since v4:
- Addressing Alan Stern's comments:
** usb_udc_vbus_handler() now offloads invocation of usb_udc_connect_control()
* from workqueue.

** Dropped vbus_events list as this was redundant. Updating to the
* latest value is suffice

Changes since v5:
- Addressing Alan Stern's comments:
** Squashed allow_connect logic to this patch.
** Fixed comment length to wrap at 76
** Cancelling vbus_work in del_gadget()

Changes since v6:
- Added reviewed by tag

Changes since v7:
- None

---
 drivers/usb/gadget/udc/core.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)
drivers/usb/gadget/udc/core.c +27 -2
index 52e6d2e84e35..d2e4f78c53e3 100644
@@ -37,6 +37,9 @@ static const struct bus_type gadget_bus_type;
  * @vbus: for udcs who care about vbus status, this value is real vbus status;
  * for udcs who do not care about vbus status, this value is always true
  * @started: the UDC's started state. True if the UDC had started.
+ * @allow_connect: Indicates whether UDC is allowed to be pulled up.
+ * Set/cleared by gadget_(un)bind_driver() after gadget driver is bound or
+ * unbound.
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -48,6 +51,8 @@ struct usb_udc {
 	struct list_head		list;
 	bool				vbus;
 	bool				started;
+	bool				allow_connect;
+	struct work_struct		vbus_work;
 };
 
 static struct class *udc_class;
@@ -706,7 +711,7 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 		goto out;
 	}
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->allow_connect) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will be connected automatically after activation.
@@ -1086,6 +1091,13 @@ static void usb_udc_connect_control(struct usb_udc *udc)
 		usb_gadget_disconnect(udc->gadget);
 }
 
+static void vbus_event_work(struct work_struct *work)
+{
+	struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work);
+
+	usb_udc_connect_control(udc);
+}
+
 /**
  * usb_udc_vbus_handler - updates the udc core vbus status, and try to
  * connect or disconnect gadget
@@ -1094,6 +1106,14 @@ static void usb_udc_connect_control(struct usb_udc *udc)
  *
  * The udc driver calls it when it wants to connect or disconnect gadget
  * according to vbus status.
+ *
+ * This function can be invoked from interrupt context by irq handlers of
+ * the gadget drivers, however, usb_udc_connect_control() has to run in
+ * non-atomic context due to the following:
+ * a. Some of the gadget driver implementations expect the ->pullup
+ * callback to be invoked in non-atomic context.
+ * b. usb_gadget_disconnect() acquires udc_lock which is a mutex.
+ * Hence offload invocation of usb_udc_connect_control() to workqueue.
  */
 void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
 {
@@ -1101,7 +1121,7 @@ void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
 
 	if (udc) {
 		udc->vbus = status;
-		usb_udc_connect_control(udc);
+		schedule_work(&udc->vbus_work);
 	}
 }
 EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
@@ -1328,6 +1348,7 @@ int usb_add_gadget(struct usb_gadget *gadget)
 	mutex_lock(&udc_lock);
 	list_add_tail(&udc->list, &udc_list);
 	mutex_unlock(&udc_lock);
+	INIT_WORK(&udc->vbus_work, vbus_event_work);
 
 	ret = device_add(&udc->dev);
 	if (ret)
@@ -1459,6 +1480,7 @@ void usb_del_gadget(struct usb_gadget *gadget)
 	flush_work(&gadget->work);
 	device_del(&gadget->dev);
 	ida_free(&gadget_id_numbers, gadget->id_number);
+	cancel_work_sync(&udc->vbus_work);
 	device_unregister(&udc->dev);
 }
 EXPORT_SYMBOL_GPL(usb_del_gadget);
@@ -1527,6 +1549,7 @@ static int gadget_bind_driver(struct device *dev)
 	if (ret)
 		goto err_start;
 	usb_gadget_enable_async_callbacks(udc);
+	udc->allow_connect = true;
 	usb_udc_connect_control(udc);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
@@ -1558,6 +1581,8 @@ static void gadget_unbind_driver(struct device *dev)
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 
+	udc->allow_connect = false;
+	cancel_work_sync(&udc->vbus_work);
 	usb_gadget_disconnect(gadget);
 	usb_gadget_disable_async_callbacks(udc);
 	if (gadget->irq)

base-commit: d37537a1f7cf09e304fe7993cb5e732534a0fb22

Signature · 1 line
2.41.0.162.gfafddb0af9-goog
#1 lore raw

PATCH v8 2/2 usb: gadget: udc: core: Prevent soft_connect_store() race

usb_udc_connect_control(), soft_connect_store() and usb_gadget_deactivate() can potentially race against each other to invoke usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard udc->started, gadget->allow_connect, gadget->deactivate and gadget->connect with connect_lock so that ->pullup() is only invoked when the gadget is bound, started and not deactivated. The routines usb_gadget_connect_locked(), usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called with this lock held.

An earlier version of this commit was reverted due to the crash reported in
https://lore.kernel.org/all/[email protected]/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing") addresses the crash reported.

Fixes 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")

---
v5 is the first version in this series.
Changes since v5:
** Fixed up commit message
** Wrapped comments at 76.

Changes since v6:
** Address Alan comments around style/presentation.
** Fixed code to acquire ->connect_lock before testing gadget->deactivated.

Changes since v7:
** Remove unused out labels reported by ktest robot

---
 drivers/usb/gadget/udc/core.c | 155 +++++++++++++++++++++++-----------
 1 file changed, 106 insertions(+), 49 deletions(-)
drivers/usb/gadget/udc/core.c +106 -49
index d2e4f78c53e3..83fd1de14784 100644
@@ -40,6 +40,11 @@ static const struct bus_type gadget_bus_type;
  * @allow_connect: Indicates whether UDC is allowed to be pulled up.
  * Set/cleared by gadget_(un)bind_driver() after gadget driver is bound or
  * unbound.
+ * @connect_lock: protects udc->started, gadget->connect,
+ * gadget->allow_connect and gadget->deactivate. The routines
+ * usb_gadget_connect_locked(), usb_gadget_disconnect_locked(),
+ * usb_udc_connect_control_locked(), usb_gadget_udc_start_locked() and
+ * usb_gadget_udc_stop_locked() are called with this lock held.
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -53,6 +58,7 @@ struct usb_udc {
 	bool				started;
 	bool				allow_connect;
 	struct work_struct		vbus_work;
+	struct mutex			connect_lock;
 };
 
 static struct class *udc_class;
@@ -692,17 +698,8 @@ int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
 }
 EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
 
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).
- *
- * Returns zero on success, else negative errno.
- */
-int usb_gadget_connect(struct usb_gadget *gadget)
+static int usb_gadget_connect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -711,10 +708,12 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 		goto out;
 	}
 
-	if (gadget->deactivated || !gadget->udc->allow_connect) {
+	if (gadget->deactivated || !gadget->udc->allow_connect || !gadget->udc->started) {
 		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will be connected automatically after activation.
+		 * If the gadget isn't usable (because it is deactivated,
+		 * unbound, or not yet started), we only save the new state.
+		 * The gadget will be connected automatically when it is
+		 * activated/bound/started.
 		 */
 		gadget->connected = true;
 		goto out;
@@ -729,22 +728,31 @@ int usb_gadget_connect(struct usb_gadget *gadget)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(usb_gadget_connect);
 
 /**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
  *
- * Following a successful disconnect, invoke the ->disconnect() callback
- * for the current gadget driver so that UDC drivers don't need to.
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).
  *
  * Returns zero on success, else negative errno.
  */
-int usb_gadget_disconnect(struct usb_gadget *gadget)
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+static int usb_gadget_disconnect_locked(struct usb_gadget *gadget)
+	__must_hold(&gadget->udc->connect_lock)
 {
 	int ret = 0;
 
@@ -756,7 +764,7 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 	if (!gadget->connected)
 		goto out;
 
-	if (gadget->deactivated) {
+	if (gadget->deactivated || !gadget->udc->started) {
 		/*
 		 * If gadget is deactivated we only save new state.
 		 * Gadget will stay disconnected after activation.
@@ -779,6 +787,30 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 
 	return ret;
 }
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Following a successful disconnect, invoke the ->disconnect() callback
+ * for the current gadget driver so that UDC drivers don't need to.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret;
+
+	mutex_lock(&gadget->udc->connect_lock);
+	ret = usb_gadget_disconnect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
+
+	return ret;
+}
 EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
 
 /**
@@ -796,13 +828,14 @@ int usb_gadget_deactivate(struct usb_gadget *gadget)
 {
 	int ret = 0;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	if (gadget->deactivated)
-		goto out;
+		goto unlock;
 
 	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
+		ret = usb_gadget_disconnect_locked(gadget);
 		if (ret)
-			goto out;
+			goto unlock;
 
 		/*
 		 * If gadget was being connected before deactivation, we want
@@ -812,7 +845,8 @@ int usb_gadget_deactivate(struct usb_gadget *gadget)
 	}
 	gadget->deactivated = true;
 
-out:
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
 	trace_usb_gadget_deactivate(gadget, ret);
 
 	return ret;
@@ -832,8 +866,9 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 {
 	int ret = 0;
 
+	mutex_lock(&gadget->udc->connect_lock);
 	if (!gadget->deactivated)
-		goto out;
+		goto unlock;
 
 	gadget->deactivated = false;
 
@@ -842,9 +877,11 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 	 * while it was being deactivated, we call usb_gadget_connect().
 	 */
 	if (gadget->connected)
-		ret = usb_gadget_connect(gadget);
+		ret = usb_gadget_connect_locked(gadget);
+	mutex_unlock(&gadget->udc->connect_lock);
 
-out:
+unlock:
+	mutex_unlock(&gadget->udc->connect_lock);
 	trace_usb_gadget_activate(gadget, ret);
 
 	return ret;
@@ -1083,19 +1120,22 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 
 /* ------------------------------------------------------------------------- */
 
-static void usb_udc_connect_control(struct usb_udc *udc)
+/* Acquire connect_lock before calling this function. */
+static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock)
 {
 	if (udc->vbus)
-		usb_gadget_connect(udc->gadget);
+		usb_gadget_connect_locked(udc->gadget);
 	else
-		usb_gadget_disconnect(udc->gadget);
+		usb_gadget_disconnect_locked(udc->gadget);
 }
 
 static void vbus_event_work(struct work_struct *work)
 {
 	struct usb_udc *udc = container_of(work, struct usb_udc, vbus_work);
 
-	usb_udc_connect_control(udc);
+	mutex_lock(&udc->connect_lock);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 }
 
 /**
@@ -1144,7 +1184,7 @@ void usb_gadget_udc_reset(struct usb_gadget *gadget,
 EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
 
 /**
- * usb_gadget_udc_start - tells usb device controller to start up
+ * usb_gadget_udc_start_locked - tells usb device controller to start up
  * @udc: The UDC to be started
  *
  * This call is issued by the UDC Class driver when it's about
@@ -1155,8 +1195,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
  * necessary to have it powered on.
  *
  * Returns zero on success, else negative errno.
+ *
+ * Caller should acquire connect_lock before invoking this function.
  */
-static inline int usb_gadget_udc_start(struct usb_udc *udc)
+static inline int usb_gadget_udc_start_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	int ret;
 
@@ -1173,7 +1216,7 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
 }
 
 /**
- * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * usb_gadget_udc_stop_locked - tells usb device controller we don't need it anymore
  * @udc: The UDC to be stopped
  *
  * This call is issued by the UDC Class driver after calling
@@ -1182,8 +1225,11 @@ static inline int usb_gadget_udc_start(struct usb_udc *udc)
  * The details are implementation specific, but it can go as
  * far as powering off UDC completely and disable its data
  * line pullups.
+ *
+ * Caller should acquire connect lock before invoking this function.
  */
-static inline void usb_gadget_udc_stop(struct usb_udc *udc)
+static inline void usb_gadget_udc_stop_locked(struct usb_udc *udc)
+	__must_hold(&udc->connect_lock)
 {
 	if (!udc->started) {
 		dev_err(&udc->dev, "UDC had already stopped\n");
@@ -1342,6 +1388,7 @@ int usb_add_gadget(struct usb_gadget *gadget)
 
 	udc->gadget = gadget;
 	gadget->udc = udc;
+	mutex_init(&udc->connect_lock);
 
 	udc->started = false;
 
@@ -1545,12 +1592,16 @@ static int gadget_bind_driver(struct device *dev)
 	if (ret)
 		goto err_bind;
 
-	ret = usb_gadget_udc_start(udc);
-	if (ret)
+	mutex_lock(&udc->connect_lock);
+	ret = usb_gadget_udc_start_locked(udc);
+	if (ret) {
+		mutex_unlock(&udc->connect_lock);
 		goto err_start;
+	}
 	usb_gadget_enable_async_callbacks(udc);
 	udc->allow_connect = true;
-	usb_udc_connect_control(udc);
+	usb_udc_connect_control_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
@@ -1583,12 +1634,14 @@ static void gadget_unbind_driver(struct device *dev)
 
 	udc->allow_connect = false;
 	cancel_work_sync(&udc->vbus_work);
-	usb_gadget_disconnect(gadget);
+	mutex_lock(&udc->connect_lock);
+	usb_gadget_disconnect_locked(gadget);
 	usb_gadget_disable_async_callbacks(udc);
 	if (gadget->irq)
 		synchronize_irq(gadget->irq);
 	udc->driver->unbind(gadget);
-	usb_gadget_udc_stop(udc);
+	usb_gadget_udc_stop_locked(udc);
+	mutex_unlock(&udc->connect_lock);
 
 	mutex_lock(&udc_lock);
 	driver->is_bound = false;
@@ -1674,11 +1727,15 @@ static ssize_t soft_connect_store(struct device *dev,
 	}
 
 	if (sysfs_streq(buf, "connect")) {
-		usb_gadget_udc_start(udc);
-		usb_gadget_connect(udc->gadget);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_udc_start_locked(udc);
+		usb_gadget_connect_locked(udc->gadget);
+		mutex_unlock(&udc->connect_lock);
 	} else if (sysfs_streq(buf, "disconnect")) {
-		usb_gadget_disconnect(udc->gadget);
-		usb_gadget_udc_stop(udc);
+		mutex_lock(&udc->connect_lock);
+		usb_gadget_disconnect_locked(udc->gadget);
+		usb_gadget_udc_stop_locked(udc);
+		mutex_unlock(&udc->connect_lock);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);
 		ret = -EINVAL;
Signature · 1 line
2.41.0.162.gfafddb0af9-goog
Reviewed-by on v8 2/2
#2 lore raw

Re: [PATCH v8 2/2] usb: gadget: udc: core: Prevent soft_connect_store() race

Quoted 15 lines · Badhri Jagan Sridharan

usb_udc_connect_control(), soft_connect_store() and usb_gadget_deactivate() can potentially race against each other to invoke usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard udc->started, gadget->allow_connect, gadget->deactivate and gadget->connect with connect_lock so that ->pullup() is only invoked when the gadget is bound, started and not deactivated. The routines usb_gadget_connect_locked(), usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called with this lock held.

An earlier version of this commit was reverted due to the crash reported in
https://lore.kernel.org/all/[email protected]/.
commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing") addresses the crash reported.

Quoted 4 lines
Fixes 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler")

---