Skip to contentSkip to conversation

drm/panel: simple: Add connector_type for innolux_at043tn24

PATCH Superseded Fabio Estevam 2 participants 2 messages Jun 19, 2023 – Jun 20, 2023

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/panel: simple: Add connector_type for innolux_at043tn24

From: Fabio Estevam <[email protected]>

The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type' information to avoid the following warning:

panel-simple panel: Specify missing connector_type

---
 drivers/gpu/drm/panel/panel-simple.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/panel/panel-simple.c +1 -0
index a247a0e7c799..7c80528d571e 100644
@@ -2178,6 +2178,7 @@ static const struct panel_desc innolux_at043tn24 = {
 		.height = 54,
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
 };
 
Signature · 1 line
2.34.1
#1 lore raw

Hi,

Quoted 8 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type' information to avoid the following warning:

panel-simple panel: Specify missing connector_type

Maybe a fixes tag ?

Neil

Quoted 16 lines
---
  drivers/gpu/drm/panel/panel-simple.c | 1 +
  1 file changed, 1 insertion(+)
drivers/gpu/drm/panel/panel-simple.c +1 -0
index a247a0e7c799..7c80528d571e 100644
@@ -2178,6 +2178,7 @@ static const struct panel_desc innolux_at043tn24 = {
  		.height = 54,
  	},
  	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
  	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
  };