Skip to contentSkip to conversation

Add initial support for SM7125 and Xiaomi SM7125 platform

PATCH Superseded David Wronek 2 participants 12 messages Jul 15, 2023

Subsystems (5)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover Add initial support for SM7125 and Xiaomi SM7125 platform

This series introduces support for the Qualcomm SM7125 SoC and the Xiaomi SM7125 platform.

---
Changes in v2:
- Allow qcom,board-id and qcom,msm-id properties
- Use QCOM_SCM_VMID_MSS_MSA definition
- Change initial regulator modes from LPM to HPM
- Move status to the bottom of nodes
- Fix up PM6150 interrupts
- Move clk patch to beginning of series
- Fix up copyright
- Take ownership of all commits with permission
- Link to v1: https://lore.kernel.org/all/[email protected]/

Changes in v3:
- Disable pm6150 rtc by default
- Fix wrong pm8150l PMIC in joyeuse dts
- Link to v2: https://lore.kernel.org/all/[email protected]/

---
David Wronek (7):
clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
soc: qcom: socinfo: Add SoC ID for SM7125
arm64: dts: qcom: pm6150: Add resin and rtc nodes
arm64: dts: qcom: Add SM7125 device tree
arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6150.dtsi          |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 423 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7125.dtsi          |  16 +
 drivers/clk/qcom/gcc-sc7180.c                 |   1 +
 drivers/soc/qcom/socinfo.c                    |   1 +
 include/dt-bindings/arm/qcom,ids.h            |   1 +
 9 files changed, 482 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
Signature · 1 line
2.41.0
#1 lore raw

PATCH v3 1/7 clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error.

Fixes 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
---
 drivers/clk/qcom/gcc-sc7180.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/qcom/gcc-sc7180.c +1 -0
index cef3c77564cf..49f36e1df4fa 100644
@@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
 		.name = "gcc_sdcc2_apps_clk_src",
 		.parent_data = gcc_parent_data_5,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_5),
+		.flags = CLK_OPS_PARENT_ENABLE,
 		.ops = &clk_rcg2_floor_ops,
 	},
 };
Signature · 1 line
2.41.0
Reviewed-by on v3 1/7
#2 lore raw

Re: [PATCH v3 1/7] clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

Quoted 6 lines · David Wronek

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error.

Fixes 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")

---

Konrad

Quoted 15 lines
 drivers/clk/qcom/gcc-sc7180.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/qcom/gcc-sc7180.c +1 -0
index cef3c77564cf..49f36e1df4fa 100644
@@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
 		.name = "gcc_sdcc2_apps_clk_src",
 		.parent_data = gcc_parent_data_5,
 		.num_parents = ARRAY_SIZE(gcc_parent_data_5),
+		.flags = CLK_OPS_PARENT_ENABLE,
 		.ops = &clk_rcg2_floor_ops,
 	},
 };
#3 lore raw

PATCH v3 2/7 dt-bindings: arm: qcom,ids: Add SoC ID for SM7125

In reply to David Wronek

Add the SoC ID for Qualcomm SM7125.

---
 include/dt-bindings/arm/qcom,ids.h | 1 +
 1 file changed, 1 insertion(+)
include/dt-bindings/arm/qcom,ids.h +1 -0
index bcbe9ee2cdaf..6a8dd2e42b24 100644
@@ -215,6 +215,7 @@
 #define QCOM_ID_SDA429W			437
 #define QCOM_ID_SM8350			439
 #define QCOM_ID_QCM2290			441
+#define QCOM_ID_SM7125			443
 #define QCOM_ID_SM6115			444
 #define QCOM_ID_IPQ5010			446
 #define QCOM_ID_IPQ5018			447
Signature · 1 line
2.41.0
#4 lore raw

PATCH v3 3/7 dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board

In reply to David Wronek

Document the xiaomi,joyeuse board based on the Qualcomm SM7125 SoC.

---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +7 -0
index 450f616774e0..a403c433e9b5 100644
@@ -77,6 +77,7 @@ description: |
         sm6125
         sm6350
         sm6375
+        sm7125
         sm7225
         sm8150
         sm8250
@@ -929,6 +930,11 @@ properties:
               - sony,pdx225
           - const: qcom,sm6375
 
+      - items:
+          - enum:
+              - xiaomi,joyeuse
+          - const: qcom,sm7125
+
       - items:
           - enum:
               - fairphone,fp4
@@ -1072,6 +1078,7 @@ allOf:
               - qcom,sm6115
               - qcom,sm6125
               - qcom,sm6350
+              - qcom,sm7125
               - qcom,sm7225
               - qcom,sm8150
               - qcom,sm8250
Signature · 1 line
2.41.0
#5 lore raw

PATCH v3 4/7 soc: qcom: socinfo: Add SoC ID for SM7125

In reply to David Wronek

Add the SoC ID entry for Qualcomm SM7125.

---
 drivers/soc/qcom/socinfo.c | 1 +
 1 file changed, 1 insertion(+)
drivers/soc/qcom/socinfo.c +1 -0
index 4d49945b3a35..785b88e2da54 100644
@@ -371,6 +371,7 @@ static const struct soc_id soc_id[] = {
 	{ qcom_board_id(SDA429W) },
 	{ qcom_board_id(SM8350) },
 	{ qcom_board_id(QCM2290) },
+	{ qcom_board_id(SM7125) },
 	{ qcom_board_id(SM6115) },
 	{ qcom_board_id(IPQ5010) },
 	{ qcom_board_id(IPQ5018) },
Signature · 1 line
2.41.0
#6 lore raw

PATCH v3 5/7 arm64: dts: qcom: pm6150: Add resin and rtc nodes

In reply to David Wronek

Add support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device, both disabled by default.

---
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/qcom/pm6150.dtsi +16 -0
index 2e6afa296141..af51eb0646ba 100644
@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm6150_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
+		pm6150_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
 		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
Signature · 1 line
2.41.0
Reviewed-by on v3 5/7
#7 lore raw

Re: [PATCH v3 5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes

Quoted 6 lines · David Wronek

Add support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device, both disabled by default.

---

Konrad

Quoted 37 lines
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/qcom/pm6150.dtsi +16 -0
index 2e6afa296141..af51eb0646ba 100644
@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm6150_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
+		pm6150_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
 		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
#8 lore raw

PATCH v3 6/7 arm64: dts: qcom: Add SM7125 device tree

In reply to David Wronek

The Snapdragon 720G (sm7125) is software-wise very similar to the Snapdragon 7c with minor differences in clock speeds and as added here, it uses the Kryo 465 instead of Kryo 468.

---
 arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
arch/arm64/boot/dts/qcom/sm7125.dtsi new file +16 -0
new file mode 100644
index 000000000000..12dd72859a43
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include "sc7180.dtsi"
+
+/* SM7125 uses Kryo 465 instead of Kryo 468 */
+&CPU0 { compatible = "qcom,kryo465"; };
+&CPU1 { compatible = "qcom,kryo465"; };
+&CPU2 { compatible = "qcom,kryo465"; };
+&CPU3 { compatible = "qcom,kryo465"; };
+&CPU4 { compatible = "qcom,kryo465"; };
+&CPU5 { compatible = "qcom,kryo465"; };
+&CPU6 { compatible = "qcom,kryo465"; };
+&CPU7 { compatible = "qcom,kryo465"; };
Signature · 1 line
2.41.0
Reviewed-by on v3 6/7
#9 lore raw

Re: [PATCH v3 6/7] arm64: dts: qcom: Add SM7125 device tree

Quoted 6 lines · David Wronek

The Snapdragon 720G (sm7125) is software-wise very similar to the Snapdragon 7c with minor differences in clock speeds and as added here, it uses the Kryo 465 instead of Kryo 468.

---

Konrad

Quoted 26 lines
 arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
arch/arm64/boot/dts/qcom/sm7125.dtsi new file +16 -0
new file mode 100644
index 000000000000..12dd72859a43
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include "sc7180.dtsi"
+
+/* SM7125 uses Kryo 465 instead of Kryo 468 */
+&CPU0 { compatible = "qcom,kryo465"; };
+&CPU1 { compatible = "qcom,kryo465"; };
+&CPU2 { compatible = "qcom,kryo465"; };
+&CPU3 { compatible = "qcom,kryo465"; };
+&CPU4 { compatible = "qcom,kryo465"; };
+&CPU5 { compatible = "qcom,kryo465"; };
+&CPU6 { compatible = "qcom,kryo465"; };
+&CPU7 { compatible = "qcom,kryo465"; };
#10 lore raw

PATCH v3 7/7 arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

In reply to David Wronek

There are 6 Xiaomi smartphones with the SM7125 SoC:

- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)

These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro.

---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 423 ++++++++++++++++++
 3 files changed, 440 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
index 337abc4ceb17..7ef9e7d43904 100644
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file +16 -0
new file mode 100644
index 000000000000..2b3d1ed1bcae
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-miatoll.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9 Pro (Global)";
+	compatible = "xiaomi,joyeuse", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x50022 1>;
+};
arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi new file +423 -0

423 lines not on this page · raw message

Signature · 1 line
2.41.0
Reviewed-by on v3 7/7
#11 lore raw

Re: [PATCH v3 7/7] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform

Quoted 9 lines · David Wronek

There are 6 Xiaomi smartphones with the SM7125 SoC:

- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)

Quoted 6 lines

These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro.

---

The copyright headers seem weird, but other than that:

Konrad

Quoted 470 lines
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts   |  16 +
 .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi  | 423 ++++++++++++++++++
 3 files changed, 440 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
index 337abc4ceb17..7ef9e7d43904 100644
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file +16 -0
new file mode 100644
index 000000000000..2b3d1ed1bcae
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-miatoll.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9 Pro (Global)";
+	compatible = "xiaomi,joyeuse", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x50022 1>;
+};
arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi new file +423 -0
new file mode 100644
index 000000000000..80073140e475
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7125.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_SM7125 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-down {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8400000>;
+			no-map;
+		};
+
+		venus_mem: memory@8ee00000 {
+			reg = <0x0 0x8ee00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@8f300000 {
+			reg = <0x0 0x8f300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@91100000 {
+			reg = <0x0 0x91100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		wlan_mem: memory@93900000 {
+			reg = <0x0 0x93900000 0x0 0x200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0x10000>;
+			no-map;
+		};
+
+		gpu_mem: memory@93b15000 {
+			reg = <0x0 0x93b15000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@9d800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9d800000 0x0 0x400000>;
+			record-size = <0x80000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x100000>;
+		};
+
+		rmtfs_mem: memory@fa601000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xfa601000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a_0p88: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_0p664: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p1: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_3p0: ldo18 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p23: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_3p0: ldo6 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&dispcc {
+	/* HACK: disable until a panel driver is ready to retain simplefb */
+	status = "disabled";
+};
+
+&pm6150_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm6150_rtc {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_3p0>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a_0p88>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	status = "okay";
+};