Add initial support for SM7125 and Xiaomi SM7125 platform
Subsystems (5)
v3 cover Add initial support for SM7125 and Xiaomi SM7125 platform
This series introduces support for the Qualcomm SM7125 SoC and the Xiaomi SM7125 platform.
---
Changes in v2:
- Allow qcom,board-id and qcom,msm-id properties
- Use QCOM_SCM_VMID_MSS_MSA definition
- Change initial regulator modes from LPM to HPM
- Move status to the bottom of nodes
- Fix up PM6150 interrupts
- Move clk patch to beginning of series
- Fix up copyright
- Take ownership of all commits with permission
- Link to v1: https://lore.kernel.org/all/[email protected]/
Changes in v3:
- Disable pm6150 rtc by default
- Fix wrong pm8150l PMIC in joyeuse dts
- Link to v2: https://lore.kernel.org/all/[email protected]/
---
David Wronek (7):
clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
soc: qcom: socinfo: Add SoC ID for SM7125
arm64: dts: qcom: pm6150: Add resin and rtc nodes
arm64: dts: qcom: Add SM7125 device tree
arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
.../devicetree/bindings/arm/qcom.yaml | 7 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 + .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 + drivers/clk/qcom/gcc-sc7180.c | 1 + drivers/soc/qcom/socinfo.c | 1 + include/dt-bindings/arm/qcom,ids.h | 1 + 9 files changed, 482 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
Signature · 1 line
2.41.0
PATCH v3 1/7 clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error.
--- drivers/clk/qcom/gcc-sc7180.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/qcom/gcc-sc7180.c +1 -0
@@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = { .name = "gcc_sdcc2_apps_clk_src", .parent_data = gcc_parent_data_5, .num_parents = ARRAY_SIZE(gcc_parent_data_5), + .flags = CLK_OPS_PARENT_ENABLE, .ops = &clk_rcg2_floor_ops, }, };
Signature · 1 line
2.41.0
Re: [PATCH v3 1/7] clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
Quoted 6 lines · David Wronek
Set .flags =
CLK_OPS_PARENT_ENABLEto fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error.Fixes 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")Signed-off-by David Wronek <[email protected]>---
Konrad
Quoted 15 lines
drivers/clk/qcom/gcc-sc7180.c | 1 + 1 file changed, 1 insertion(+)drivers/clk/qcom/gcc-sc7180.c +1
-0@@ -651,6 +651,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = { .name = "gcc_sdcc2_apps_clk_src", .parent_data = gcc_parent_data_5, .num_parents = ARRAY_SIZE(gcc_parent_data_5), + .flags = CLK_OPS_PARENT_ENABLE, .ops = &clk_rcg2_floor_ops, }, };
PATCH v3 2/7 dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
In reply to David WronekAdd the SoC ID for Qualcomm SM7125.
--- include/dt-bindings/arm/qcom,ids.h | 1 + 1 file changed, 1 insertion(+)
include/dt-bindings/arm/qcom,ids.h +1 -0
@@ -215,6 +215,7 @@#define QCOM_ID_SDA429W 437#define QCOM_ID_SM8350 439#define QCOM_ID_QCM2290 441 +#define QCOM_ID_SM7125 443#define QCOM_ID_SM6115 444#define QCOM_ID_IPQ5010 446#define QCOM_ID_IPQ5018 447
Signature · 1 line
2.41.0
PATCH v3 3/7 dt-bindings: arm: qcom: Document SM7125 and xiaomi,joyeuse board
In reply to David WronekDocument the xiaomi,joyeuse board based on the Qualcomm SM7125 SoC.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +7 -0
@@ -77,6 +77,7 @@ description: | sm6125 sm6350 sm6375 + sm7125 sm7225 sm8150 sm8250
@@ -929,6 +930,11 @@ properties: - sony,pdx225 - const: qcom,sm6375 + - items: + - enum: + - xiaomi,joyeuse + - const: qcom,sm7125 + - items: - enum: - fairphone,fp4
@@ -1072,6 +1078,7 @@ allOf: - qcom,sm6115 - qcom,sm6125 - qcom,sm6350 + - qcom,sm7125 - qcom,sm7225 - qcom,sm8150 - qcom,sm8250
Signature · 1 line
2.41.0
PATCH v3 4/7 soc: qcom: socinfo: Add SoC ID for SM7125
In reply to David WronekAdd the SoC ID entry for Qualcomm SM7125.
--- drivers/soc/qcom/socinfo.c | 1 + 1 file changed, 1 insertion(+)
drivers/soc/qcom/socinfo.c +1 -0
@@ -371,6 +371,7 @@ static const struct soc_id soc_id[] = { { qcom_board_id(SDA429W) }, { qcom_board_id(SM8350) }, { qcom_board_id(QCM2290) }, + { qcom_board_id(SM7125) }, { qcom_board_id(SM6115) }, { qcom_board_id(IPQ5010) }, { qcom_board_id(IPQ5018) },
Signature · 1 line
2.41.0
PATCH v3 5/7 arm64: dts: qcom: pm6150: Add resin and rtc nodes
In reply to David WronekAdd support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device, both disabled by default.
--- arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/qcom/pm6150.dtsi +16 -0
@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey { bias-pull-up; linux,code = <KEY_POWER>; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 { status = "disabled"; }; + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>;
Signature · 1 line
2.41.0
Re: [PATCH v3 5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes
Quoted 6 lines · David Wronek
Add support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device, both disabled by default.
Signed-off-by David Wronek <[email protected]>Tested-by Nikita Travkin <[email protected]>---
Konrad
Quoted 37 lines
arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)arch/arm64/boot/dts/qcom/pm6150.dtsi +16
-0@@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey { bias-pull-up; linux,code = <KEY_POWER>; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 {@@ -88,6 +96,14 @@ pm6150_adc_tm: adc-tm@3500 { status = "disabled"; }; + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>;
PATCH v3 6/7 arm64: dts: qcom: Add SM7125 device tree
In reply to David WronekThe Snapdragon 720G (sm7125) is software-wise very similar to the Snapdragon 7c with minor differences in clock speeds and as added here, it uses the Kryo 465 instead of Kryo 468.
--- arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsi
arch/arm64/boot/dts/qcom/sm7125.dtsi new file +16 -0
@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include "sc7180.dtsi" + +/* SM7125 uses Kryo 465 instead of Kryo 468 */ +&CPU0 { compatible = "qcom,kryo465"; }; +&CPU1 { compatible = "qcom,kryo465"; }; +&CPU2 { compatible = "qcom,kryo465"; }; +&CPU3 { compatible = "qcom,kryo465"; }; +&CPU4 { compatible = "qcom,kryo465"; }; +&CPU5 { compatible = "qcom,kryo465"; }; +&CPU6 { compatible = "qcom,kryo465"; }; +&CPU7 { compatible = "qcom,kryo465"; };
Signature · 1 line
2.41.0
Re: [PATCH v3 6/7] arm64: dts: qcom: Add SM7125 device tree
Quoted 6 lines · David Wronek
The Snapdragon 720G (sm7125) is software-wise very similar to the Snapdragon 7c with minor differences in clock speeds and as added here, it uses the Kryo 465 instead of Kryo 468.
Signed-off-by David Wronek <[email protected]>---
Konrad
Quoted 26 lines
arch/arm64/boot/dts/qcom/sm7125.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125.dtsiarch/arm64/boot/dts/qcom/sm7125.dtsi new file +16
-0@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include "sc7180.dtsi" + +/* SM7125 uses Kryo 465 instead of Kryo 468 */ +&CPU0 { compatible = "qcom,kryo465"; }; +&CPU1 { compatible = "qcom,kryo465"; }; +&CPU2 { compatible = "qcom,kryo465"; }; +&CPU3 { compatible = "qcom,kryo465"; }; +&CPU4 { compatible = "qcom,kryo465"; }; +&CPU5 { compatible = "qcom,kryo465"; }; +&CPU6 { compatible = "qcom,kryo465"; }; +&CPU7 { compatible = "qcom,kryo465"; };
PATCH v3 7/7 arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
In reply to David WronekThere are 6 Xiaomi smartphones with the SM7125 SoC:
- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)
These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro.
--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ 3 files changed, 440 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file +16 -0
@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-xiaomi-miatoll.dtsi" + +/ { + model = "Xiaomi Redmi Note 9 Pro (Global)"; + compatible = "xiaomi,joyeuse", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x50022 1>; +};
arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi new file +423 -0
423 lines not on this page · raw message
Signature · 1 line
2.41.0
Re: [PATCH v3 7/7] arm64: dts: qcom: Add support for the Xiaomi SM7125 platform
Quoted 9 lines · David Wronek
There are 6 Xiaomi smartphones with the SM7125 SoC:
- POCO M2 Pro (gram)
- Redmi Note 9S (curtana)
- Redmi Note 9 Pro (Global, joyeuse)
- Redmi Note 9 Pro (India, curtana)
- Redmi Note 9 Pro Max (excalibur)
- Redmi Note 10 Lite (curtana)
Quoted 6 lines
These devices share a common board design (a.k.a miatoll) with only a few differences. Add support for the common board, as well as support for the global Redmi Note 9 Pro.
Signed-off-by David Wronek <[email protected]>---
The copyright headers seem weird, but other than that:
Konrad
Quoted 470 lines
arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm7125-xiaomi-joyeuse.dts | 16 + .../boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi | 423 ++++++++++++++++++ 3 files changed, 440 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsiarch/arm64/boot/dts/qcom/Makefile +1
-0@@ -192,6 +192,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtbarch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts new file +16
-0@@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sm7125-xiaomi-miatoll.dtsi" + +/ { + model = "Xiaomi Redmi Note 9 Pro (Global)"; + compatible = "xiaomi,joyeuse", "qcom,sm7125"; + + /* required for bootloader to select correct board */ + qcom,board-id = <0x50022 1>; +};arch/arm64/boot/dts/qcom/sm7125-xiaomi-miatoll.dtsi new file +423
-0@@ -0,0 +1,423 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm7125.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &rmtfs_mem; + +/ { + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_SM7125 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + key-vol-down { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + reserved-memory { + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8400000>; + no-map; + }; + + venus_mem: memory@8ee00000 { + reg = <0x0 0x8ee00000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: memory@8f300000 { + reg = <0x0 0x8f300000 0x0 0x1e00000>; + no-map; + }; + + adsp_mem: memory@91100000 { + reg = <0x0 0x91100000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: memory@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + + ipa_fw_mem: memory@93b00000 { + reg = <0x0 0x93b00000 0x0 0x10000>; + no-map; + }; + + gpu_mem: memory@93b15000 { + reg = <0x0 0x93b15000 0x0 0x2000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>; + no-map; + }; + + pstore_mem: ramoops@9d800000 { + compatible = "ramoops"; + reg = <0x0 0x9d800000 0x0 0x400000>; + record-size = <0x80000>; + pmsg-size = <0x200000>; + console-size = <0x100000>; + }; + + rmtfs_mem: memory@fa601000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xfa601000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a_0p88: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_0p664: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p1: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_3p0: ldo18 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p23: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_3p0: ldo6 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&dispcc { + /* HACK: disable until a panel driver is ready to retain simplefb */ + status = "disabled"; +}; + +&pm6150_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm6150_rtc { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_3p0>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <34 4>, <59 4>; + + sdc2_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sd-cd-pins { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&usb_1 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + status = "okay"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p88>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p1>; + vdda-pll-supply = <&vreg_l11a_1p8>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4a_0p88>; + vdda-pll-supply = <&vreg_l3c_1p23>; + status = "okay"; +};