dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
Subsystems (2)
PATCH v3 1/2 dt-bindings: arm: Add Gateworks i.MX8M Mini GW7905-0x board
Add DT compatible string for a Gateworks GW7905-0x board based on the i.MX8M Mini from NXP.
---
v3:
- add Krzysztof's tag
v2:
- sort alphabetically
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -909,6 +909,7 @@ properties: - fsl,imx8mm-evk # i.MX8MM EVK Board - fsl,imx8mm-evkb # i.MX8MM EVKB Board - gateworks,imx8mm-gw7904 + - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board - gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw72xx-0x # i.MX8MM Gateworks Development Kit - gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit
Signature · 1 line
2.25.1
PATCH v3 2/2 arm64: dts: freescale: Add imx8mm-venice-gw7905-0x
The Gateworks imx8mm-venice-gw7905-0x consists of a SOM + baseboard.
The GW700x SOM contains the following:
- i.MX8M Mini SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button controller, and ADC's
- PMIC
- SOM connector providing:
- FEC GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 2.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW7905 Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB 3.0 HUB
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
---
v3:
- change clock name from pcie0-refclk to clock-pcie0
- start properties with compatible then reg with pinctrl following
v2:
- no changes
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mm-venice-gw7905-0x.dts | 28 ++ .../dts/freescale/imx8mm-venice-gw7905.dtsi | 303 ++++++++++++++++++ 3 files changed, 332 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts new file +28 -0
@@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mm.dtsi" +#include "imx8mm-venice-gw700x.dtsi" +#include "imx8mm-venice-gw7905.dtsi" + +/ { + model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit"; + compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +}; + +/* Disable SOM interfaces not used on baseboard */ +&fec1 { + status = "disabled"; +}; + +&usdhc1 { + status = "disabled"; +};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi new file +303 -0
303 lines not on this page · raw message
Signature · 1 line
2.25.1
Shawn Guo
AppliedQuoted 5 lines · Tim Harvey
Add DT compatible string for a Gateworks GW7905-0x board based on the i.MX8M Mini from NXP.
Signed-off-by Tim Harvey <[email protected]>
Applied both, thanks!