Skip to contentSkip to conversation

Improve performance for BLK_MQ_F_BLOCKING drivers

PATCH Superseded Bart Van Assche 2 participants 9 messages Jul 19, 2023 – Jul 21, 2023

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Improve performance for BLK_MQ_F_BLOCKING drivers

Hi Jens,

Request queues are run asynchronously if BLK_MQ_F_BLOCKING has been set. This results in suboptimal performance. This patch series improves performance if BLK_MQ_F_BLOCKING has been set by running request queues synchronously whenever possible.

Please consider this patch series for the next merge window.

Thanks,

Bart.

Changes compared to v1:
- Fixed support for the combination BLK_MQ_F_BLOCKING + BLIST_SINGLELUN.

Bart Van Assche (3):
scsi: Inline scsi_kick_queue()
scsi: Remove a blk_mq_run_hw_queues() call
block: Improve performance for BLK_MQ_F_BLOCKING drivers

 block/blk-mq.c          | 17 +++++++++++------
 drivers/scsi/scsi_lib.c | 11 +++--------
 2 files changed, 14 insertions(+), 14 deletions(-)
#1 lore raw

PATCH v2 1/3 scsi: Inline scsi_kick_queue()

scsi_kick_queue() is too short to keep it as a separate function. Hence inline it. This patch prepares for modifying the second argument passed to blk_mq_run_hw_queues().

Cc Martin K. Petersen <[email protected]>
---
 drivers/scsi/scsi_lib.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
drivers/scsi/scsi_lib.c +2 -7
index ad9afae49544..414d29eef968 100644
@@ -300,11 +300,6 @@ void scsi_device_unbusy(struct scsi_device *sdev, struct scsi_cmnd *cmd)
 	cmd->budget_token = -1;
 }
 
-static void scsi_kick_queue(struct request_queue *q)
-{
-	blk_mq_run_hw_queues(q, false);
-}
-
 /*
  * Kick the queue of SCSI device @sdev if @sdev != current_sdev. Called with
  * interrupts disabled.
@@ -340,7 +335,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev)
 	 * but in most cases, we will be first. Ideally, each LU on the
 	 * target would get some limited time or requests on the target.
 	 */
-	scsi_kick_queue(current_sdev->request_queue);
+	blk_mq_run_hw_queues(current_sdev->request_queue, false);
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	if (!starget->starget_sdev_user)
@@ -427,7 +422,7 @@ static void scsi_starved_list_run(struct Scsi_Host *shost)
 			continue;
 		spin_unlock_irqrestore(shost->host_lock, flags);
 
-		scsi_kick_queue(slq);
+		blk_mq_run_hw_queues(slq, false);
 		blk_put_queue(slq);
 
 		spin_lock_irqsave(shost->host_lock, flags);
Reviewed-by on v2 1/3
#2 lore raw

Re: [PATCH v2 1/3] scsi: Inline scsi_kick_queue()

Quoted 3 lines · Bart Van Assche

scsi_kick_queue() is too short to keep it as a separate function. Hence inline it. This patch prepares for modifying the second argument passed to blk_mq_run_hw_queues().

It wouldn't say "too short" as short functions can be useful too. But this one is indeed quite pointless, so the change looks good, even if the commit log could be improved a bit:

#3 lore raw

PATCH v2 2/3 scsi: Remove a blk_mq_run_hw_queues() call

In reply to Bart Van Assche

blk_mq_kick_requeue_list() calls blk_mq_run_hw_queues() asynchronously. Leave out the direct blk_mq_run_hw_queues() call. This patch causes scsi_run_queue() to call blk_mq_run_hw_queues() asynchronously instead of synchronously. Since scsi_run_queue() is not called from the hot I/O submission path, this patch does not affect the hot path.

Cc Martin K. Petersen <[email protected]>
---
 drivers/scsi/scsi_lib.c | 1 -
 1 file changed, 1 deletion(-)
drivers/scsi/scsi_lib.c +0 -1
index 414d29eef968..7043ca0f4da9 100644
@@ -448,7 +448,6 @@ static void scsi_run_queue(struct request_queue *q)
 		scsi_starved_list_run(sdev->host);
 
 	blk_mq_kick_requeue_list(q);
-	blk_mq_run_hw_queues(q, false);
 }
 
 void scsi_requeue_run_queue(struct work_struct *work)
#4 lore raw

Re: [PATCH v2 2/3] scsi: Remove a blk_mq_run_hw_queues() call

Quoted 5 lines · Bart Van Assche

blk_mq_kick_requeue_list() calls blk_mq_run_hw_queues() asynchronously. Leave out the direct blk_mq_run_hw_queues() call. This patch causes scsi_run_queue() to call blk_mq_run_hw_queues() asynchronously instead of synchronously. Since scsi_run_queue() is not called from the hot I/O submission path, this patch does not affect the hot path.

I think this looks good, but a comment in the code that we now rely on blk_mq_kick_requeue_list to run the queue for us might be useful as that is a little counter-intuitive.

#5 lore raw

PATCH v2 3/3 block: Improve performance for BLK_MQ_F_BLOCKING drivers

In reply to Bart Van Assche

blk_mq_run_queue() runs the queue asynchronously if BLK_MQ_F_BLOCKING has been set. This is suboptimal since running the queue asynchronously is slower than running the queue synchronously. This patch modifies blk_mq_run_queue() as follows if BLK_MQ_F_BLOCKING has been set:
- Run the queue synchronously if it is allowed to sleep.
- Run the queue asynchronously if it is not allowed to sleep. Additionally, blk_mq_run_hw_queue(hctx, false) calls are modified into blk_mq_run_hw_queue(hctx, hctx->flags & BLK_MQ_F_BLOCKING) if the caller may be invoked from atomic context.

The following caller chains have been reviewed:

blk_mq_run_hw_queue(hctx, false)
blk_mq_get_tag() /* may sleep, hence the functions it calls may also sleep */
blk_execute_rq_nowait()
nvme_*() /* the NVMe driver does not set BLK_MQ_F_BLOCKING */
scsi_eh_lock_door() /* may sleep */
sg_common_write() /* implements an ioctl and hence may sleep */
st_scsi_execute() /* may sleep */
pscsi_execute_cmd() /* may sleep */
ufshpb_execute_umap_req() /* may sleep */
ufshbp_execute_map_req() /* may sleep */
blk_execute_rq() /* may sleep */
blk_mq_run_hw_queues(q, async=false)
blk_freeze_queue_start() /* may sleep */
blk_mq_requeue_work() /* may sleep */
scsi_kick_queue()
scsi_requeue_run_queue() /* may sleep */ scsi_run_host_queues()
scsi_ioctl_reset() /* may sleep */
blk_mq_insert_requests(hctx, ctx, list, run_queue_async=false)
blk_mq_dispatch_plug_list(plug, from_sched=false)
blk_mq_flush_plug_list(plug, from_schedule=false)
__blk_flush_plug(plug, from_schedule=false) blk_add_rq_to_plug()
blk_execute_rq_nowait() /* see above */ blk_mq_submit_bio() /* may sleep if REQ_NOWAIT has not been set */
blk_mq_plug_issue_direct()
blk_mq_flush_plug_list() /* see above */
blk_mq_dispatch_plug_list(plug, from_sched=false)
blk_mq_flush_plug_list() /* see above */
blk_mq_try_issue_directly()
blk_mq_submit_bio() /* may sleep if REQ_NOWAIT has not been set */
blk_mq_try_issue_list_directly(hctx, list)
blk_mq_insert_requests() /* see above */

Cc Christoph Hellwig <[email protected]>
Cc Ming Lei <[email protected]>
---
 block/blk-mq.c          | 17 +++++++++++------
 drivers/scsi/scsi_lib.c |  3 ++-
 2 files changed, 13 insertions(+), 7 deletions(-)
block/blk-mq.c +11 -6
index 5504719b970d..d5ab0bd8b472 100644
@@ -1289,7 +1289,8 @@ static void blk_add_rq_to_plug(struct blk_plug *plug, struct request *rq)
  *
  * Description:
  *    Insert a fully prepared request at the back of the I/O scheduler queue
- *    for execution.  Don't wait for completion.
+ *    for execution. Don't wait for completion. May sleep if BLK_MQ_F_BLOCKING
+ *    has been set.
  *
  * Note:
  *    This function will invoke @done directly if the queue is dead.
@@ -2213,6 +2214,8 @@ void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
 	 */
 	WARN_ON_ONCE(!async && in_interrupt());
 
+	might_sleep_if(!async && hctx->flags & BLK_MQ_F_BLOCKING);
+
 	/*
 	 * When queue is quiesced, we may be switching io scheduler, or
 	 * updating nr_hw_queues, or other things, and we can't run queue
@@ -2228,8 +2231,7 @@ void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
 	if (!need_run)
 		return;
 
-	if (async || (hctx->flags & BLK_MQ_F_BLOCKING) ||
-	    !cpumask_test_cpu(raw_smp_processor_id(), hctx->cpumask)) {
+	if (async || !cpumask_test_cpu(raw_smp_processor_id(), hctx->cpumask)) {
 		blk_mq_delay_run_hw_queue(hctx, 0);
 		return;
 	}
@@ -2364,7 +2366,7 @@ void blk_mq_start_hw_queue(struct blk_mq_hw_ctx *hctx)
 {
 	clear_bit(BLK_MQ_S_STOPPED, &hctx->state);
 
-	blk_mq_run_hw_queue(hctx, false);
+	blk_mq_run_hw_queue(hctx, hctx->flags & BLK_MQ_F_BLOCKING);
 }
 EXPORT_SYMBOL(blk_mq_start_hw_queue);
 
@@ -2394,7 +2396,8 @@ void blk_mq_start_stopped_hw_queues(struct request_queue *q, bool async)
 	unsigned long i;
 
 	queue_for_each_hw_ctx(q, hctx, i)
-		blk_mq_start_stopped_hw_queue(hctx, async);
+		blk_mq_start_stopped_hw_queue(hctx, async ||
+					(hctx->flags & BLK_MQ_F_BLOCKING));
 }
 EXPORT_SYMBOL(blk_mq_start_stopped_hw_queues);
 
@@ -2452,6 +2455,8 @@ static void blk_mq_insert_requests(struct blk_mq_hw_ctx *hctx,
 	list_for_each_entry(rq, list, queuelist) {
 		BUG_ON(rq->mq_ctx != ctx);
 		trace_block_rq_insert(rq);
+		if (rq->cmd_flags & REQ_NOWAIT)
+			run_queue_async = true;
 	}
 
 	spin_lock(&ctx->lock);
@@ -2612,7 +2617,7 @@ static void blk_mq_try_issue_directly(struct blk_mq_hw_ctx *hctx,
 
 	if ((rq->rq_flags & RQF_USE_SCHED) || !blk_mq_get_budget_and_tag(rq)) {
 		blk_mq_insert_request(rq, 0);
-		blk_mq_run_hw_queue(hctx, false);
+		blk_mq_run_hw_queue(hctx, rq->cmd_flags & REQ_NOWAIT);
 		return;
 	}
 
drivers/scsi/scsi_lib.c +2 -1
index 7043ca0f4da9..84fb0feb047f 100644
@@ -335,7 +335,8 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev)
 	 * but in most cases, we will be first. Ideally, each LU on the
 	 * target would get some limited time or requests on the target.
 	 */
-	blk_mq_run_hw_queues(current_sdev->request_queue, false);
+	blk_mq_run_hw_queues(current_sdev->request_queue,
+			     shost->queuecommand_may_block);
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	if (!starget->starget_sdev_user)
#6 lore raw

Re: [PATCH v2 3/3] block: Improve performance for BLK_MQ_F_BLOCKING drivers

Quoted 2 lines · Bart Van Assche

blk_mq_run_queue() runs the queue asynchronously if BLK_MQ_F_BLOCKING has been set.

Maybe something like:

blk_mq_run_queue() always runs the queue asynchronously if BLK_MQ_F_BLOCKING is set on the tag_set.

block/blk-mq.c void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async) · line 2217

Quoted 10 lines

+ * for execution. Don't wait for completion. May sleep if BLK_MQ_F_BLOCKING
+ * has been set.
*
* Note:
* This function will invoke @done directly if the queue is dead.

block/blk-mq.c +1 -0
@@ -2213,6 +2214,8 @@ void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
 	 */
 	WARN_ON_ONCE(!async && in_interrupt());
 
+	might_sleep_if(!async && hctx->flags & BLK_MQ_F_BLOCKING);

This is some odd an very complex calling conventions. I suspect most !BLK_MQ_F_BLOCKING could also deal with the may sleep if not async, and that would give us a much easier to audit change as we could remove the WARN_ON_ONCE above and just do a:

	might_sleep_if(!async);

In fact this might be a good time to split up blk_mq_run_hw_queue into blk_mq_run_hw_queue and blk_mq_run_hw_queue_async and do away with the bool and have cristal clear calling conventions.

If we really need !async calles than can sleep we can add a specific blk_mq_run_hw_queue_atomic.

#7 lore raw

Re: [PATCH v2 3/3] block: Improve performance for BLK_MQ_F_BLOCKING drivers

Quoted 17 lines · Christoph Hellwig

block/blk-mq.c void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async) · line 2217

Quoted 10 lines · Bart Van Assche

+ * for execution. Don't wait for completion. May sleep if BLK_MQ_F_BLOCKING
+ * has been set.
*
* Note:
* This function will invoke @done directly if the queue is dead.

block/blk-mq.c +1 -0
@@ -2213,6 +2214,8 @@ void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async)
  	 */
  	WARN_ON_ONCE(!async && in_interrupt());
 
+	might_sleep_if(!async && hctx->flags & BLK_MQ_F_BLOCKING);

This is some odd an very complex calling conventions. I suspect most !BLK_MQ_F_BLOCKING could also deal with the may sleep if not async, and that would give us a much easier to audit change as we could remove the WARN_ON_ONCE above and just do a:

Quoted 8 lines
	might_sleep_if(!async);

In fact this might be a good time to split up blk_mq_run_hw_queue into blk_mq_run_hw_queue and blk_mq_run_hw_queue_async and do away with the bool and have cristal clear calling conventions.

If we really need !async calles than can sleep we can add a specific blk_mq_run_hw_queue_atomic.

Hi Christoph,

blk_mq_run_hw_queue(hctx, false) is called from inside the block layer with an RCU lock held if BLK_MQ_F_BLOCKING and with an SRCU lock held if BLK_MQ_F_BLOCKING is not set. So I'm not sure whether it is possible to simplify the above might_sleep_if() statement. From block/blk-mq.h:

/* run the code block in @dispatch_ops with rcu/srcu read lock held */
#define __blk_mq_run_dispatch_ops(q, check_sleep, dispatch_ops) \

do {								\
	if ((q)->tag_set->flags & BLK_MQ_F_BLOCKING) {		\
		struct blk_mq_tag_set *__tag_set = (q)->tag_set; \
		int srcu_idx;					\
								\
		might_sleep_if(check_sleep);			\
		srcu_idx = srcu_read_lock(__tag_set->srcu);	\
		(dispatch_ops);					\
		srcu_read_unlock(__tag_set->srcu, srcu_idx);	\
	} else {						\
		rcu_read_lock();				\
		(dispatch_ops);					\
		rcu_read_unlock();				\
	}							\
} while (0)

Thanks,

Bart.

#8 lore raw

Re: [PATCH v2 3/3] block: Improve performance for BLK_MQ_F_BLOCKING drivers

Quoted 4 lines · Bart Van Assche

blk_mq_run_hw_queue(hctx, false) is called from inside the block layer with an RCU lock held if BLK_MQ_F_BLOCKING and with an SRCU lock held if BLK_MQ_F_BLOCKING is not set. So I'm not sure whether it is possible to simplify the above might_sleep_if() statement. From block/blk-mq.h:

Ok, it looks like we can't go down that way then.