virtio_net: add per queue interrupt coalescing support
Subsystems (5)
v4 cover virtio_net: add per queue interrupt coalescing support
Currently, coalescing parameters are grouped for all transmit and receive virtqueues. This patch series add support to set or get the parameters for a specified virtqueue.
When the traffic between virtqueues is unbalanced, for example, one virtqueue is busy and another virtqueue is idle, then it will be very useful to control coalescing parameters at the virtqueue granularity.
Example command:
$ ethtool -Q eth5 queue_mask 0x1 --coalesce tx-packets 10 Would set max_packets=10 to VQ 1. $ ethtool -Q eth5 queue_mask 0x1 --coalesce rx-packets 10 Would set max_packets=10 to VQ 0. $ ethtool -Q eth5 queue_mask 0x1 --show-coalesce Queue: 0 Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0
rx-usecs: 222
rx-frames: 0
rx-usecs-irq: 0
rx-frames-irq: 256
tx-usecs: 222
tx-frames: 0
tx-usecs-irq: 0
tx-frames-irq: 256
rx-usecs-low: 0
rx-frame-low: 0
tx-usecs-low: 0
tx-frame-low: 0
rx-usecs-high: 0
rx-frame-high: 0
tx-usecs-high: 0
tx-frame-high: 0
Gavin Li (3):
virtio_net: extract interrupt coalescing settings to a structure
virtio_net: support per queue interrupt coalesce command
---
changelog:v1->v2
- Addressed the comment from Xuan Zhuo
- Allocate memory from heap instead of using stack memory for control vq messagesv2->v3
- Addressed the comment from Heng Qi
- Use control_buf for control vq messagesv3->v4
- Addressed the comment from Michael S. Tsirkin
- Refactor set_coalesce of both per queue and global config that were littered with if/else branches
---
virtio_net: enable per queue interrupt coalesce feature
drivers/net/virtio_net.c | 187 ++++++++++++++++++++++++++++---- include/uapi/linux/virtio_net.h | 14 +++ 2 files changed, 177 insertions(+), 24 deletions(-)
Signature · 1 line
2.39.1
PATCH v4 1/3 virtio_net: extract interrupt coalescing settings to a structure
Extract interrupt coalescing settings to a structure so that it could be reused in other data structures.
--- drivers/net/virtio_net.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/net/virtio_net.c +19 -16
@@ -126,6 +126,11 @@ static const struct virtnet_stat_desc virtnet_rq_stats_desc[] = {#define VIRTNET_SQ_STATS_LEN ARRAY_SIZE(virtnet_sq_stats_desc)#define VIRTNET_RQ_STATS_LEN ARRAY_SIZE(virtnet_rq_stats_desc) +struct virtnet_interrupt_coalesce { +u32 max_packets; +u32 max_usecs; +}; +/* Internal representation of a send virtqueue */ struct send_queue {/* Virtqueue associated with this send _queue */
@@ -281,10 +286,8 @@ struct virtnet_info {u32 speed;/* Interrupt coalescing settings */ -u32 tx_usecs; -u32 rx_usecs; -u32 tx_max_packets; -u32 rx_max_packets; +struct virtnet_interrupt_coalesce intr_coal_tx; +struct virtnet_interrupt_coalesce intr_coal_rx;unsigned long guest_offloads;unsigned long guest_offloads_capable;
@@ -3056,8 +3059,8 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return -EINVAL ;/* Save parameters */ - vi->tx_usecs = ec->tx_coalesce_usecs; - vi->tx_max_packets = ec->tx_max_coalesced_frames; + vi->intr_coal_tx.max_usecs = ec->tx_coalesce_usecs; + vi->intr_coal_tx.max_packets = ec->tx_max_coalesced_frames; vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames);
@@ -3069,8 +3072,8 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return -EINVAL ;/* Save parameters */ - vi->rx_usecs = ec->rx_coalesce_usecs; - vi->rx_max_packets = ec->rx_max_coalesced_frames; + vi->intr_coal_rx.max_usecs = ec->rx_coalesce_usecs; + vi->intr_coal_rx.max_packets = ec->rx_max_coalesced_frames;return 0 ; }
@@ -3132,10 +3135,10 @@ static int virtnet_get_coalesce(struct net_device *dev,struct virtnet_info *vi =netdev_priv (dev);if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_NOTF_COAL )) { - ec->rx_coalesce_usecs = vi->rx_usecs; - ec->tx_coalesce_usecs = vi->tx_usecs; - ec->tx_max_coalesced_frames = vi->tx_max_packets; - ec->rx_max_coalesced_frames = vi->rx_max_packets; + ec->rx_coalesce_usecs = vi->intr_coal_rx.max_usecs; + ec->tx_coalesce_usecs = vi->intr_coal_tx.max_usecs; + ec->tx_max_coalesced_frames = vi->intr_coal_tx.max_packets; + ec->rx_max_coalesced_frames = vi->intr_coal_rx.max_packets; }else { ec->rx_max_coalesced_frames =1 ;
@@ -4119,10 +4122,10 @@ static int virtnet_probe(struct virtio_device *vdev) }if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_NOTF_COAL )) { - vi->rx_usecs =0 ; - vi->tx_usecs =0 ; - vi->tx_max_packets =0 ; - vi->rx_max_packets =0 ; + vi->intr_coal_rx.max_usecs =0 ; + vi->intr_coal_tx.max_usecs =0 ; + vi->intr_coal_tx.max_packets =0 ; + vi->intr_coal_rx.max_packets =0 ; }if (virtio_has_feature (vdev,VIRTIO_NET_F_HASH_REPORT ))
Signature · 1 line
2.39.1
PATCH v4 2/3 virtio_net: support per queue interrupt coalesce command
In reply to Gavin LiAdd interrupt_coalesce config in send_queue and receive_queue to cache user config.
Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM.
Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration.
--- drivers/net/virtio_net.c | 149 ++++++++++++++++++++++++++++++-- include/uapi/linux/virtio_net.h | 14 +++ 2 files changed, 155 insertions(+), 8 deletions(-)
drivers/net/virtio_net.c +141 -8
@@ -144,6 +144,8 @@ struct send_queue {struct virtnet_sq_stats stats; +struct virtnet_interrupt_coalesce intr_coal; +struct napi_struct napi;/* Record whether sq is in reset state. */
@@ -161,6 +163,8 @@ struct receive_queue {struct virtnet_rq_stats stats; +struct virtnet_interrupt_coalesce intr_coal; +/* Chain pages by the private ptr. */ struct page *pages;
@@ -212,6 +216,7 @@ struct control_buf {struct virtio_net_ctrl_rss rss;struct virtio_net_ctrl_coal_tx coal_tx;struct virtio_net_ctrl_coal_rx coal_rx; +struct virtio_net_ctrl_coal_vq coal_vq; };struct virtnet_info {
@@ -3078,6 +3083,55 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } +static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 vqn,u32 max_usecs,u32 max_packets) +{ +struct scatterlist sgs; + + vi->ctrl->coal_vq.vqn =cpu_to_le16 (vqn); + vi->ctrl->coal_vq.coal.max_usecs =cpu_to_le32 (max_usecs); + vi->ctrl->coal_vq.coal.max_packets =cpu_to_le32 (max_packets); +sg_init_one (&sgs, &vi->ctrl->coal_vq,sizeof (vi->ctrl->coal_vq)); + +if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , +VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET , + &sgs)) +return -EINVAL ; + +return 0 ; +} + +static int virtnet_send_notf_coal_vq_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec, +u16 queue) +{ +int err; + +if (ec->rx_coalesce_usecs || ec->rx_max_coalesced_frames) { + err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (queue), + ec->rx_coalesce_usecs, + ec->rx_max_coalesced_frames); +if (err) +return err; +/* Save parameters */ + vi->rq[queue].intr_coal.max_usecs = ec->rx_coalesce_usecs; + vi->rq[queue].intr_coal.max_packets = ec->rx_max_coalesced_frames; + } + +if (ec->tx_coalesce_usecs || ec->tx_max_coalesced_frames) { + err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (queue), + ec->tx_coalesce_usecs, + ec->tx_max_coalesced_frames); +if (err) +return err; +/* Save parameters */ + vi->sq[queue].intr_coal.max_usecs = ec->tx_coalesce_usecs; + vi->sq[queue].intr_coal.max_packets = ec->tx_max_coalesced_frames; + } + +return 0 ; +} +static int virtnet_coal_params_supported (struct ethtool_coalesce *ec) {/* usecs coalescing is supported only if VIRTIO_NET_F_NOTF_COAL
@@ -3093,22 +3147,42 @@ static int virtnet_coal_params_supported(struct ethtool_coalesce *ec)return 0 ; } +static int virtnet_should_update_vq_weight (int dev_flags,int weight, +int vq_weight,bool *should_update) +{ +if (weight ^ vq_weight) { +if (dev_flags &IFF_UP ) +return -EBUSY ; + *should_update = true; + } + +return 0 ; +} +static int virtnet_set_coalesce (struct net_device *dev,struct ethtool_coalesce *ec,struct kernel_ethtool_coalesce *kernel_coal,struct netlink_ext_ack *extack) {struct virtnet_info *vi =netdev_priv (dev); -int ret, i, napi_weight; +int ret, queue_number, napi_weight;bool update_napi = false;/* Can't change NAPI weight if the link is up */ napi_weight = ec->tx_max_coalesced_frames ?NAPI_POLL_WEIGHT :0 ; -if (napi_weight ^ vi->sq[0 ].napi.weight) { -if (dev->flags &IFF_UP ) -return -EBUSY ; -else - update_napi = true; +for (queue_number =0 ; queue_number < vi->max_queue_pairs; queue_number++) { + ret =virtnet_should_update_vq_weight (dev->flags, napi_weight, + vi->sq[queue_number].napi.weight, + &update_napi); +if (ret) +return ret; + +if (update_napi) { +/* All queues that belong to [queue_number, queue_count] will be +* updated for the sake of simplicity, which might not be necessary +*/ +break ; + } }if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_NOTF_COAL ))
@@ -3120,8 +3194,8 @@ static int virtnet_set_coalesce(struct net_device *dev,return ret;if (update_napi) { -for (i =0 ; i < vi->max_queue_pairs; i++) - vi->sq[i].napi.weight = napi_weight; +for (; queue_number < vi->max_queue_pairs; queue_number++) + vi->sq[queue_number].napi.weight = napi_weight; }return ret;
@@ -3149,6 +3223,63 @@ static int virtnet_get_coalesce(struct net_device *dev,return 0 ; } +static int virtnet_set_per_queue_coalesce (struct net_device *dev, +u32 queue, +struct ethtool_coalesce *ec) +{ +struct virtnet_info *vi =netdev_priv (dev); +int ret, napi_weight; +bool update_napi = false; + +if (queue >= vi->max_queue_pairs) +return -EINVAL ; + +/* Can't change NAPI weight if the link is up */ + napi_weight = ec->tx_max_coalesced_frames ?NAPI_POLL_WEIGHT :0 ; + ret =virtnet_should_update_vq_weight (dev->flags, napi_weight, + vi->sq[queue].napi.weight, + &update_napi); +if (ret) +return ret; + +if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) + ret =virtnet_send_notf_coal_vq_cmds (vi, ec, queue); +else + ret =virtnet_coal_params_supported (ec); + +if (ret) +return ret; + +if (update_napi) + vi->sq[queue].napi.weight = napi_weight; + +return 0 ; +} + +static int virtnet_get_per_queue_coalesce (struct net_device *dev, +u32 queue, +struct ethtool_coalesce *ec) +{ +struct virtnet_info *vi =netdev_priv (dev); + +if (queue >= vi->max_queue_pairs) +return -EINVAL ; + +if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) { + ec->rx_coalesce_usecs = vi->rq[queue].intr_coal.max_usecs; + ec->tx_coalesce_usecs = vi->sq[queue].intr_coal.max_usecs; + ec->tx_max_coalesced_frames = vi->sq[queue].intr_coal.max_packets; + ec->rx_max_coalesced_frames = vi->rq[queue].intr_coal.max_packets; + }else { + ec->rx_max_coalesced_frames =1 ; + +if (vi->sq[0 ].napi.weight) + ec->tx_max_coalesced_frames =1 ; + } + +return 0 ; +} +static void virtnet_init_settings (struct net_device *dev) {struct virtnet_info *vi =netdev_priv (dev);
@@ -3279,6 +3410,8 @@ static const struct ethtool_ops virtnet_ethtool_ops = { .set_link_ksettings = virtnet_set_link_ksettings, .set_coalesce = virtnet_set_coalesce, .get_coalesce = virtnet_get_coalesce, + .set_per_queue_coalesce = virtnet_set_per_queue_coalesce, + .get_per_queue_coalesce = virtnet_get_per_queue_coalesce, .get_rxfh_key_size = virtnet_get_rxfh_key_size, .get_rxfh_indir_size = virtnet_get_rxfh_indir_size, .get_rxfh = virtnet_get_rxfh,
include/uapi/linux/virtio_net.h +14 -0
@@ -56,6 +56,7 @@#define VIRTIO_NET_F_MQ 22/* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 23/* Set MAC address */ +#define VIRTIO_NET_F_VQ_NOTF_COAL 52/* Device supports virtqueue notification coalescing */ #define VIRTIO_NET_F_NOTF_COAL 53/* Device supports notifications coalescing */ #define VIRTIO_NET_F_GUEST_USO4 54/* Guest can handle USOv4 in. */ #define VIRTIO_NET_F_GUEST_USO6 55/* Guest can handle USOv6 in. */
@@ -391,5 +392,18 @@ struct virtio_net_ctrl_coal_rx { };#define VIRTIO_NET_CTRL_NOTF_COAL_RX_SET 1 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET 2 +#define VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET 3 + +struct virtio_net_ctrl_coal { +__le32 max_packets; +__le32 max_usecs; +}; + +struct virtio_net_ctrl_coal_vq { +__le16 vqn; +__le16 reserved; +struct virtio_net_ctrl_coal coal; +};#endif /* _UAPI_LINUX_VIRTIO_NET_H */
Signature · 1 line
2.39.1
Paolo Abeni
maintainerRe: [PATCH net-next V4 2/3] virtio_net: support per queue interrupt coalesce command
Quoted 7 lines · Gavin Li
Add
interrupt_coalesceconfig insend_queueandreceive_queueto cache user config.Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM.
Quoted 8 lines
Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration.
Signed-off-by Gavin Li <[email protected]>Reviewed-by Dragos Tatulea <[email protected]>Reviewed-by Jiri Pirko <[email protected]>
FTR, this patch is significantly different from the version previously acked/reviewed, I'm unsure if all the reviewers are ok with the new one.
[...]
Quoted 17 lines
static int virtnet_set_coalesce(struct
net_device*dev,drivers/net/virtio_net.c +1
-6struct ethtool_coalesce *ec, struct kernel_ethtool_coalesce *kernel_coal, struct netlink_ext_ack *extack) { struct virtnet_info *vi = netdev_priv(dev); -int ret, i, napi_weight; +int ret, queue_number, napi_weight;bool update_napi = false;/* Can't change NAPI weight if the link is up */ napi_weight = ec->tx_max_coalesced_frames ?NAPI_POLL_WEIGHT :0 ; -if (napi_weight ^ vi->sq[0 ].napi.weight) { -if (dev->flags &IFF_UP ) -return -EBUSY ; -else - update_napi = true;
drivers/net/virtio_net.c static int virtnet_coal_params_supported(struct ethtool_coalesce *ec) · line 3182
Quoted 10 lines
drivers/net/virtio_net.c +10
-0+for (queue_number =0 ; queue_number < vi->max_queue_pairs; queue_number++) { + ret =virtnet_should_update_vq_weight (dev->flags, napi_weight, + vi->sq[queue_number].napi.weight, + &update_napi); +if (ret) +return ret; + +if (update_napi) { +/* All queues that belong to [queue_number, queue_count] will be +* updated for the sake of simplicity, which might not be necessary
It looks like the comment above still refers to the old code. Should be:
[queue_number, vi->max_queue_pairs]
Otherwise LGTM, thanks!
Paolo
Re: [PATCH net-next V4 2/3] virtio_net: support per queue interrupt coalesce command
Quoted 13 lines · Paolo Abeni
Quoted 11 lines · Gavin Li
Add
interrupt_coalesceconfig insend_queueandreceive_queueto cache user config.Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM.
Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Gavin Li <[email protected]>Reviewed-by Dragos Tatulea <[email protected]>Reviewed-by Jiri Pirko <[email protected]>FTR, this patch is significantly different from the version previously acked/reviewed, I'm unsure if all the reviewers are ok with the new one.
Good point, and I plan to review this no later than next Monday and offer my ack if necessary. Please hold this series now.
Thanks
Quoted 39 lines
[...]
Quoted 17 lines
static int virtnet_set_coalesce(struct
net_device*dev,
structethtool_coalesce*ec, structkernel_ethtool_coalesce*kernel_coal, structnetlink_ext_ack*extack){ struct virtnet_info *vi = netdev_priv(dev);drivers/net/virtio_net.c +1
-6-int ret, i, napi_weight; +int ret, queue_number, napi_weight;bool update_napi = false;/* Can't change NAPI weight if the link is up */ napi_weight = ec->tx_max_coalesced_frames ?NAPI_POLL_WEIGHT :0 ; -if (napi_weight ^ vi->sq[0 ].napi.weight) { -if (dev->flags &IFF_UP ) -return -EBUSY ; -else - update_napi = true;drivers/net/virtio_net.c static int virtnet_coal_params_supported(struct ethtool_coalesce *ec) · line 3182
Quoted 10 lines
drivers/net/virtio_net.c +10
-0+for (queue_number =0 ; queue_number < vi->max_queue_pairs; queue_number++) { + ret =virtnet_should_update_vq_weight (dev->flags, napi_weight, + vi->sq[queue_number].napi.weight, + &update_napi); +if (ret) +return ret; + +if (update_napi) { +/* All queues that belong to [queue_number, queue_count] will be +* updated for the sake of simplicity, which might not be necessary It looks like the comment above still refers to the old code. Should be:
[queue_number, vi->max_queue_pairs]Otherwise LGTM, thanks!
Paolo
Re: [PATCH net-next V4 2/3] virtio_net: support per queue interrupt coalesce command
In reply to Paolo AbeniQuoted 17 lines · Paolo Abeni
Quoted 7 lines · Gavin Li
Add
interrupt_coalesceconfig insend_queueandreceive_queueto cache user config.Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM.
Quoted 8 lines
Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration.
Signed-off-by Gavin Li <[email protected]>Reviewed-by Dragos Tatulea <[email protected]>Reviewed-by Jiri Pirko <[email protected]>
Quoted 5 lines
FTR, this patch is significantly different from the version previously acked/reviewed, I'm unsure if all the reviewers are ok with the new one.
[...]
still ok by me
let's wait for Jason too.
Quoted 30 lines
Quoted 17 lines
static int virtnet_set_coalesce(struct
net_device*dev,drivers/net/virtio_net.c +1
-6struct ethtool_coalesce *ec, struct kernel_ethtool_coalesce *kernel_coal, struct netlink_ext_ack *extack) { struct virtnet_info *vi = netdev_priv(dev); -int ret, i, napi_weight; +int ret, queue_number, napi_weight;bool update_napi = false;/* Can't change NAPI weight if the link is up */ napi_weight = ec->tx_max_coalesced_frames ?NAPI_POLL_WEIGHT :0 ; -if (napi_weight ^ vi->sq[0 ].napi.weight) { -if (dev->flags &IFF_UP ) -return -EBUSY ; -else - update_napi = true;drivers/net/virtio_net.c static int virtnet_coal_params_supported(struct ethtool_coalesce *ec) · line 3182
Quoted 10 lines
drivers/net/virtio_net.c +10
-0+for (queue_number =0 ; queue_number < vi->max_queue_pairs; queue_number++) { + ret =virtnet_should_update_vq_weight (dev->flags, napi_weight, + vi->sq[queue_number].napi.weight, + &update_napi); +if (ret) +return ret; + +if (update_napi) { +/* All queues that belong to [queue_number, queue_count] will be +* updated for the sake of simplicity, which might not be necessary It looks like the comment above still refers to the old code. Should be:
Quoted 5 lines
[queue_number, vi->max_queue_pairs]Otherwise LGTM, thanks!
Paolo
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Re: [PATCH net-next V4 2/3] virtio_net: support per queue interrupt coalesce command
Quoted 21 lines · Michael S. Tsirkin
Quoted 20 lines · Paolo Abeni
Quoted 7 lines · Gavin Li
Add
interrupt_coalesceconfig insend_queueandreceive_queueto cache user config.Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM.
Quoted 8 lines
Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration.
Signed-off-by Gavin Li <[email protected]>Reviewed-by Dragos Tatulea <[email protected]>Reviewed-by Jiri Pirko <[email protected]>FTR, this patch is significantly different from the version previously acked/reviewed, I'm unsure if all the reviewers are ok with the new one.
Quoted 6 lines
Quoted 1 line
[...]
still ok by me
let's wait for Jason too.
I'm fine with this series (I've acked each patch).
Thanks
Quoted 35 lines
Quoted 35 lines
Quoted 18 lines
static int virtnet_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec, struct kernel_ethtool_coalesce *kernel_coal, struct netlink_ext_ack *extack) { struct virtnet_info *vi = netdev_priv(dev);drivers/net/virtio_net.c +1
-6-int ret, i, napi_weight; +int ret, queue_number, napi_weight;bool update_napi = false;/* Can't change NAPI weight if the link is up */ napi_weight = ec->tx_max_coalesced_frames ?NAPI_POLL_WEIGHT :0 ; -if (napi_weight ^ vi->sq[0 ].napi.weight) { -if (dev->flags &IFF_UP ) -return -EBUSY ; -else - update_napi = true;drivers/net/virtio_net.c static int virtnet_coal_params_supported(struct ethtool_coalesce *ec) · line 3182
Quoted 10 lines
drivers/net/virtio_net.c +10
-0+for (queue_number =0 ; queue_number < vi->max_queue_pairs; queue_number++) { + ret =virtnet_should_update_vq_weight (dev->flags, napi_weight, + vi->sq[queue_number].napi.weight, + &update_napi); +if (ret) +return ret; + +if (update_napi) { +/* All queues that belong to [queue_number, queue_count] will be +* updated for the sake of simplicity, which might not be necessary It looks like the comment above still refers to the old code. Should be:
[queue_number, vi->max_queue_pairs]Otherwise LGTM, thanks!
Paolo
Re: [PATCH net-next V4 2/3] virtio_net: support per queue interrupt coalesce command
In reply to Gavin LiQuoted 11 lines · Gavin Li
Add
interrupt_coalesceconfig insend_queueandreceive_queueto cache user config.Send per virtqueue interrupt moderation config to underlying device in order to have more efficient interrupt moderation and cpu utilization of guest VM.
Additionally, address all the VQs when updating the global configuration, as now the individual VQs configuration can diverge from the global configuration.
Quoted 5 lines
Signed-off-by Gavin Li <[email protected]>Reviewed-by Dragos Tatulea <[email protected]>Reviewed-by Jiri Pirko <[email protected]>Reviewed-by Heng Qi <[email protected]>
Thanks
PATCH v4 3/3 virtio_net: enable per queue interrupt coalesce feature
In reply to Gavin LiEnable per queue interrupt coalesce feature bit in driver and validate its dependency with control queue.
--- drivers/net/virtio_net.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/virtio_net.c +3 -0
@@ -4088,6 +4088,8 @@ static bool virtnet_validate_features(struct virtio_device *vdev)VIRTNET_FAIL_ON (vdev,VIRTIO_NET_F_HASH_REPORT ,"VIRTIO_NET_F_CTRL_VQ" ) ||VIRTNET_FAIL_ON (vdev,VIRTIO_NET_F_NOTF_COAL , +"VIRTIO_NET_F_CTRL_VQ" ) || +VIRTNET_FAIL_ON (vdev,VIRTIO_NET_F_VQ_NOTF_COAL , "VIRTIO_NET_F_CTRL_VQ"))) { return false; }
@@ -4512,6 +4514,7 @@ static struct virtio_device_id id_table[] = {VIRTIO_NET_F_MTU ,VIRTIO_NET_F_CTRL_GUEST_OFFLOADS , \VIRTIO_NET_F_SPEED_DUPLEX ,VIRTIO_NET_F_STANDBY , \VIRTIO_NET_F_RSS ,VIRTIO_NET_F_HASH_REPORT ,VIRTIO_NET_F_NOTF_COAL , \ +VIRTIO_NET_F_VQ_NOTF_COAL , \VIRTIO_NET_F_GUEST_HDRLEN static unsigned int features[] = {
Signature · 1 line
2.39.1
Re: [PATCH net-next V4 3/3] virtio_net: enable per queue interrupt coalesce feature
Quoted 8 lines · Gavin Li
Enable per queue interrupt coalesce feature bit in driver and validate its dependency with control queue.
Signed-off-by Gavin Li <[email protected]>Reviewed-by Dragos Tatulea <[email protected]>Reviewed-by Jiri Pirko <[email protected]>Reviewed-by Heng Qi <[email protected]>
Thanks
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization