Skip to contentSkip to conversation

i2c: designware: code consolidation & cleanups

PATCH Superseded Andy Shevchenko 5 participants 35 messages Jul 25, 2023 – Sep 25, 2023

Subsystems (3)

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Andy Shevchenko

author reviewer
#0 lore raw

cover i2c: designware: code consolidation & cleanups

Mainly this is about firmware parsing and configuring code consolidation. Besides that some cleanups here and there.

Andy Shevchenko (9):
i2c: designware: Move has_acpi_companion() to common code
i2c: designware: Change i2c_dw_acpi_configure() prototype
i2c: designware: Align dw_i2c_of_configure() with

    i2c_dw_acpi_configure()

i2c: designware: Propagate firmware node
i2c: designware: Always provide ID tables
i2c: designware: Consolidate firmware parsing and configure code
i2c: desingware: Unify firmware type checks
i2c: designware: Get rid of redundant 'else'
i2c: designware: Fix spelling and other issues in the comments

 drivers/i2c/busses/i2c-designware-amdpsp.c  |  10 +-
 drivers/i2c/busses/i2c-designware-common.c  |  84 +++++++++++---
 drivers/i2c/busses/i2c-designware-core.h    |  25 ++---
 drivers/i2c/busses/i2c-designware-master.c  |  15 ++-
 drivers/i2c/busses/i2c-designware-pcidrv.c  |  13 +--
 drivers/i2c/busses/i2c-designware-platdrv.c | 117 ++++++--------------
 drivers/i2c/busses/i2c-designware-slave.c   |   6 +-
 7 files changed, 131 insertions(+), 139 deletions(-)
Signature · 1 line
2.40.0.1.gaa8946217a0b
author reviewer
#1 lore raw

PATCH 1/9 i2c: designware: Move has_acpi_companion() to common code

Instead of checking in callers, move the call to the callee.

---
 drivers/i2c/busses/i2c-designware-common.c  | 11 +++++++++--
 drivers/i2c/busses/i2c-designware-pcidrv.c  |  3 +--
 drivers/i2c/busses/i2c-designware-platdrv.c |  3 +--
 3 files changed, 11 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +9 -2
index cdd8c67d9129..683f7a9beb46 100644
@@ -255,9 +255,8 @@ static void i2c_dw_acpi_params(struct device *device, char method[],
 	kfree(buf.pointer);
 }
 
-int i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(device);
 	struct i2c_timings *t = &dev->timings;
 	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
 
@@ -285,6 +284,14 @@ int i2c_dw_acpi_configure(struct device *device)
 		dev->sda_hold_time = fs_ht;
 		break;
 	}
+}
+
+int i2c_dw_acpi_configure(struct device *device)
+{
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+	if (has_acpi_companion(device))
+		i2c_dw_acpi_do_configure(dev, device);
 
 	return 0;
 }
drivers/i2c/busses/i2c-designware-pcidrv.c +1 -2
index 61d7a27aa070..d9d80650fbdc 100644
@@ -303,8 +303,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 
 	i2c_dw_adjust_bus_speed(dev);
 
-	if (has_acpi_companion(&pdev->dev))
-		i2c_dw_acpi_configure(&pdev->dev);
+	i2c_dw_acpi_configure(&pdev->dev);
 
 	r = i2c_dw_validate_speed(dev);
 	if (r) {
drivers/i2c/busses/i2c-designware-platdrv.c +1 -2
index 970c1c3b0402..4eedb0734438 100644
@@ -314,8 +314,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node)
 		dw_i2c_of_configure(pdev);
 
-	if (has_acpi_companion(&pdev->dev))
-		i2c_dw_acpi_configure(&pdev->dev);
+	i2c_dw_acpi_configure(&pdev->dev);
 
 	ret = i2c_dw_validate_speed(dev);
 	if (ret)
Signature · 1 line
2.40.0.1.gaa8946217a0b
maintainer Reviewed-by on v1 1/9
#2 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Hi Andy,

Quoted 25 lines · Andy Shevchenko

Instead of checking in callers, move the call to the callee.

---
 drivers/i2c/busses/i2c-designware-common.c  | 11 +++++++++--
 drivers/i2c/busses/i2c-designware-pcidrv.c  |  3 +--
 drivers/i2c/busses/i2c-designware-platdrv.c |  3 +--
 3 files changed, 11 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +1 -2
index cdd8c67d9129..683f7a9beb46 100644
@@ -255,9 +255,8 @@ static void i2c_dw_acpi_params(struct device *device, char method[],
 	kfree(buf.pointer);
 }
 
-int i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(device);
 	struct i2c_timings *t = &dev->timings;
 	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
 

drivers/i2c/busses/i2c-designware-common.c int i2c_dw_acpi_configure(struct device *device) · line 289

Quoted 6 lines
drivers/i2c/busses/i2c-designware-common.c +3 -0
@@ -285,6 +284,14 @@ int i2c_dw_acpi_configure(struct device *device)
 		dev->sda_hold_time = fs_ht;
 		break;
 	}
+}
+
+int i2c_dw_acpi_configure(struct device *device)

I was about to ask you why are we keeping this int, but then I saw that you are making it void in the next patch :)

Andi

#3 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Quoted 20 lines · Andi Shyti

Hi Andy,

Quoted 17 lines · Andy Shevchenko

Instead of checking in callers, move the call to the callee.

---
  drivers/i2c/busses/i2c-designware-common.c  | 11 +++++++++--
  drivers/i2c/busses/i2c-designware-pcidrv.c  |  3 +--
  drivers/i2c/busses/i2c-designware-platdrv.c |  3 +--
  3 files changed, 11 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +0 -0
index cdd8c67d9129..683f7a9beb46 100644
@@ -255,9 +255,8 @@ static void i2c_dw_acpi_params(struct device *device, char method[],
  	kfree(buf.pointer);
  }
 
Quoted 2 lines

drivers/i2c/busses/i2c-designware-common.c static void i2c_dw_acpi_params(struct device *device, char method[], · line 258

Quoted 2 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
-int i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device)

Because of this dual dev pointer obscurity which is cleaned in the next patch and Andi's comment below in my opinion it makes sense to combine patches 1 and 2.

Quoted 16 lines

drivers/i2c/busses/i2c-designware-common.c int i2c_dw_acpi_configure(struct device *device) · line 289

Quoted 12 lines
drivers/i2c/busses/i2c-designware-common.c +3 -1
  {
-	struct dw_i2c_dev *dev = dev_get_drvdata(device);
  	struct i2c_timings *t = &dev->timings;
  	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
 
@@ -285,6 +284,14 @@ int i2c_dw_acpi_configure(struct device *device)
  		dev->sda_hold_time = fs_ht;
  		break;
  	}
+}
+
+int i2c_dw_acpi_configure(struct device *device)

I was about to ask you why are we keeping this int, but then I saw that you are making it void in the next patch :)

author reviewer
#4 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Quoted 2 lines · Jarkko Nikula
Quoted 1 line · Andi Shyti

On Tue, Jul 25, 2023 at 05:30:15PM +0300, Andy Shevchenko wrote:

...

Quoted 6 lines
Quoted 2 lines

drivers/i2c/busses/i2c-designware-common.c static void i2c_dw_acpi_params(struct device *device, char method[], · line 258

Quoted 2 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
-int i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device)

Because of this dual dev pointer obscurity which is cleaned in the next patch and Andi's comment below in my opinion it makes sense to combine patches 1 and 2.

Besides that these 2 are logically slightly different, the changes don't drop the duality here. And there is also the other patch at the end of the series that makes the below disappear.

Not sure that any of these would be the best approach (Git commit is cheap, maintenance and backporting might be harder). So, ideas are welcome!

...

Quoted 4 lines
Quoted 4 lines
Quoted 1 line

+int i2c_dw_acpi_configure(struct device *device)

I was about to ask you why are we keeping this int, but then I saw that you are making it void in the next patch :)

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#5 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Quoted 13 lines · Andy Shevchenko
Quoted 2 lines · Jarkko Nikula
Quoted 1 line · Andi Shyti

On Tue, Jul 25, 2023 at 05:30:15PM +0300, Andy Shevchenko wrote:

...

Quoted 6 lines
Quoted 2 lines

drivers/i2c/busses/i2c-designware-common.c static void i2c_dw_acpi_params(struct device *device, char method[], · line 258

Quoted 2 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
-int i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device)

Because of this dual dev pointer obscurity which is cleaned in the next patch and Andi's comment below in my opinion it makes sense to combine patches 1 and 2.

Quoted 7 lines

Besides that these 2 are logically slightly different, the changes don't drop the duality here. And there is also the other patch at the end of the series that makes the below disappear.

Not sure that any of these would be the best approach (Git commit is cheap, maintenance and backporting might be harder). So, ideas are welcome!

Unless I'm missing something you won't need to carry both struct dw_i2c_dev *dev and struct device *device since struct dw_i2c_dev carries it already and it's set before calling the dw_i2c_of_configure() and i2c_dw_acpi_configure().

Also it feels needless to add new _do_configure() functions since only reason for them seems to be how patches are organized now.

So if instead of this in i2c_dw_fw_parse_and_configure()

	if (is_of_node(fwnode))
		i2c_dw_of_do_configure(dev, dev->dev);
	else if (is_acpi_node(fwnode))
		i2c_dw_acpi_do_configure(dev, dev->dev);

let end result be

	if (is_of_node(fwnode))
		i2c_dw_of_configure(dev);
	else if (is_acpi_node(fwnode))
		i2c_dw_acpi_configure(dev);

My gut feeling says patchset would be a bit simpler if we aim for this end result in mind.

Simplest patches like int to void return type conversion first since either i2c_dw_acpi_configure() and dw_i2c_of_configure() return is not used now. Then perhaps dw_i2c_of_configure() renaming.

Moving to common code I don't know how well it's splittable into smaller patches or would single bigger patch look better.

#6 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Quoted 46 lines · Jarkko Nikula
Quoted 13 lines · Andy Shevchenko
Quoted 2 lines · Jarkko Nikula
Quoted 1 line · Andi Shyti

On Tue, Jul 25, 2023 at 05:30:15PM +0300, Andy Shevchenko wrote:

...

Quoted 6 lines
Quoted 2 lines

drivers/i2c/busses/i2c-designware-common.c static void i2c_dw_acpi_params(struct device *device, char method[], · line 258

Quoted 2 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
-int i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device)

Because of this dual dev pointer obscurity which is cleaned in the next patch and Andi's comment below in my opinion it makes sense to combine patches 1 and 2.

Quoted 7 lines

Besides that these 2 are logically slightly different, the changes don't drop the duality here. And there is also the other patch at the end of the series that makes the below disappear.

Not sure that any of these would be the best approach (Git commit is cheap, maintenance and backporting might be harder). So, ideas are welcome!

Unless I'm missing something you won't need to carry both struct dw_i2c_dev *dev and struct device *device since struct dw_i2c_dev carries it already and it's set before calling the dw_i2c_of_configure() and i2c_dw_acpi_configure().

Also it feels needless to add new _do_configure() functions since only reason for them seems to be how patches are organized now.

So if instead of this in i2c_dw_fw_parse_and_configure()

	if (is_of_node(fwnode))
		i2c_dw_of_do_configure(dev, dev->dev);
	else if (is_acpi_node(fwnode))
		i2c_dw_acpi_do_configure(dev, dev->dev);

let end result be

	if (is_of_node(fwnode))
		i2c_dw_of_configure(dev);
	else if (is_acpi_node(fwnode))
		i2c_dw_acpi_configure(dev);

My gut feeling says patchset would be a bit simpler if we aim for this end result in mind.

Quoted 6 lines

Simplest patches like int to void return type conversion first since either i2c_dw_acpi_configure() and dw_i2c_of_configure() return is not used now. Then perhaps dw_i2c_of_configure() renaming.

Moving to common code I don't know how well it's splittable into smaller patches or would single bigger patch look better.

Does this all mean that the series needs to be refactored?

author reviewer
#7 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Quoted 2 lines · Wolfram Sang
Quoted 1 line · Jarkko Nikula

On 7/31/23 23:14, Andy Shevchenko wrote:

...

Quoted 4 lines
Quoted 2 lines

Moving to common code I don't know how well it's splittable into smaller patches or would single bigger patch look better.

Does this all mean that the series needs to be refactored?

At least that is my impression. Just have no time to look at it (yet).

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#8 lore raw

Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code

Quoted 4 lines
Quoted 2 lines

Does this all mean that the series needs to be refactored?

At least that is my impression. Just have no time to look at it (yet).

Okay, I'll set it to 'changes requested' then. Thanks for the heads up!

author reviewer
#9 lore raw

PATCH 2/9 i2c: designware: Change i2c_dw_acpi_configure() prototype

In reply to Andy Shevchenko

There is no point to have it being int and at the same time it may take struct dw_i2c_dev pointer instead of plain device.

Change the prototype and implementation accordingly.

---
 drivers/i2c/busses/i2c-designware-common.c  | 10 +++-------
 drivers/i2c/busses/i2c-designware-core.h    |  4 ++--
 drivers/i2c/busses/i2c-designware-pcidrv.c  |  2 +-
 drivers/i2c/busses/i2c-designware-platdrv.c |  2 +-
 4 files changed, 7 insertions(+), 11 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +3 -7
index 683f7a9beb46..222b530c0441 100644
@@ -286,14 +286,10 @@ static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *devi
 	}
 }
 
-int i2c_dw_acpi_configure(struct device *device)
+void i2c_dw_acpi_configure(struct dw_i2c_dev *dev)
 {
-	struct dw_i2c_dev *dev = dev_get_drvdata(device);
-
-	if (has_acpi_companion(device))
-		i2c_dw_acpi_do_configure(dev, device);
-
-	return 0;
+	if (has_acpi_companion(dev->dev))
+		i2c_dw_acpi_do_configure(dev, dev->dev);
 }
 EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
 
drivers/i2c/busses/i2c-designware-core.h +2 -2
index cf4f684f5356..03f4d44ae94c 100644
@@ -394,7 +394,7 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
 void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
 
 #if IS_ENABLED(CONFIG_ACPI)
-int i2c_dw_acpi_configure(struct device *device);
+void i2c_dw_acpi_configure(struct dw_i2c_dev *dev);
 #else
-static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; }
+static inline void i2c_dw_acpi_configure(struct dw_i2c_dev *dev) { }
 #endif
drivers/i2c/busses/i2c-designware-pcidrv.c +1 -1
index d9d80650fbdc..7f5a04538c71 100644
@@ -303,7 +303,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 
 	i2c_dw_adjust_bus_speed(dev);
 
-	i2c_dw_acpi_configure(&pdev->dev);
+	i2c_dw_acpi_configure(dev);
 
 	r = i2c_dw_validate_speed(dev);
 	if (r) {
drivers/i2c/busses/i2c-designware-platdrv.c +1 -1
index 4eedb0734438..c60e55b8398e 100644
@@ -314,7 +314,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node)
 		dw_i2c_of_configure(pdev);
 
-	i2c_dw_acpi_configure(&pdev->dev);
+	i2c_dw_acpi_configure(dev);
 
 	ret = i2c_dw_validate_speed(dev);
 	if (ret)
Signature · 1 line
2.40.0.1.gaa8946217a0b
maintainer Reviewed-by on v1 2/9
#10 lore raw

Re: [PATCH v1 2/9] i2c: designware: Change i2c_dw_acpi_configure() prototype

Hi Andy,

Quoted 6 lines · Andy Shevchenko

There is no point to have it being int and at the same time it may take struct dw_i2c_dev pointer instead of plain device.

Change the prototype and implementation accordingly.

Andi

author reviewer
#11 lore raw

PATCH 3/9 i2c: designware: Align dw_i2c_of_configure() with i2c_dw_acpi_configure()

In reply to Andy Shevchenko

For the sake of consistency align dw_i2c_of_configure() with i2c_dw_acpi_configure() and rename the former to i2c_dw_of_configure().

---
 drivers/i2c/busses/i2c-designware-platdrv.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +9 -10
index c60e55b8398e..d35a6bbcb6fb 100644
@@ -132,9 +132,9 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static int dw_i2c_of_configure(struct platform_device *pdev)
+static void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device)
 {
-	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct platform_device *pdev = to_platform_device(device);
 
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:
@@ -145,8 +145,12 @@ static int dw_i2c_of_configure(struct platform_device *pdev)
 	default:
 		break;
 	}
+}
 
-	return 0;
+static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
+{
+	if (dev_of_node(dev->dev))
+		i2c_dw_of_do_configure(dev, dev->dev);
 }
 
 static const struct of_device_id dw_i2c_of_match[] = {
@@ -162,10 +166,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	return -ENODEV;
 }
 
-static inline int dw_i2c_of_configure(struct platform_device *pdev)
-{
-	return -ENODEV;
-}
+static inline void i2c_dw_of_configure(struct dw_i2c_dev *dev) { }
 #endif
 
 static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
@@ -311,9 +312,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	i2c_dw_adjust_bus_speed(dev);
 
-	if (pdev->dev.of_node)
-		dw_i2c_of_configure(pdev);
-
+	i2c_dw_of_configure(dev);
 	i2c_dw_acpi_configure(dev);
 
 	ret = i2c_dw_validate_speed(dev);
Signature · 1 line
2.40.0.1.gaa8946217a0b
maintainer Reviewed-by on v1 3/9
#12 lore raw

Re: [PATCH v1 3/9] i2c: designware: Align dw_i2c_of_configure() with i2c_dw_acpi_configure()

Hi Andy,

Quoted 25 lines · Andy Shevchenko

For the sake of consistency align dw_i2c_of_configure() with i2c_dw_acpi_configure() and rename the former to i2c_dw_of_configure().

---
 drivers/i2c/busses/i2c-designware-platdrv.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +2 -2
index c60e55b8398e..d35a6bbcb6fb 100644
@@ -132,9 +132,9 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static int dw_i2c_of_configure(struct platform_device *pdev)
+static void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device)
 {
-	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct platform_device *pdev = to_platform_device(device);
 
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:

drivers/i2c/busses/i2c-designware-platdrv.c static int dw_i2c_of_configure(struct platform_device *pdev) · line 153

Quoted 10 lines
drivers/i2c/busses/i2c-designware-platdrv.c +5 -1
@@ -145,8 +145,12 @@ static int dw_i2c_of_configure(struct platform_device *pdev)
 	default:
 		break;
 	}
+}
 
-	return 0;
+static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
+{
+	if (dev_of_node(dev->dev))
+		i2c_dw_of_do_configure(dev, dev->dev);

You could add this check above and avoid this micro-if-functions.

	if (!dev_of_node(dev->dev))
		return;

up to you...

Andi

Quoted 29 lines
drivers/i2c/busses/i2c-designware-platdrv.c +2 -7
 }
 
 static const struct of_device_id dw_i2c_of_match[] = {
@@ -162,10 +166,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	return -ENODEV;
 }
 
-static inline int dw_i2c_of_configure(struct platform_device *pdev)
-{
-	return -ENODEV;
-}
+static inline void i2c_dw_of_configure(struct dw_i2c_dev *dev) { }
 #endif
 
 static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
@@ -311,9 +312,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	i2c_dw_adjust_bus_speed(dev);
 
-	if (pdev->dev.of_node)
-		dw_i2c_of_configure(pdev);
-
+	i2c_dw_of_configure(dev);
 	i2c_dw_acpi_configure(dev);
 
 	ret = i2c_dw_validate_speed(dev);
Signature · 1 line
2.40.0.1.gaa8946217a0b
author reviewer
#13 lore raw

Re: [PATCH v1 3/9] i2c: designware: Align dw_i2c_of_configure() with i2c_dw_acpi_configure()

Quoted 1 line · Andi Shyti

On Tue, Jul 25, 2023 at 05:30:17PM +0300, Andy Shevchenko wrote:

...

Quoted 11 lines

drivers/i2c/busses/i2c-designware-platdrv.c static int dw_i2c_of_configure(struct platform_device *pdev) · line 153

Quoted 4 lines
drivers/i2c/busses/i2c-designware-platdrv.c +4 -0
+static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
+{
+	if (dev_of_node(dev->dev))
+		i2c_dw_of_do_configure(dev, dev->dev);

You could add this check above and avoid this micro-if-functions.

	if (!dev_of_node(dev->dev))
		return;

up to you...

Have you had a chance to look into patch 7? Maybe you can come up with some advice or ideas on how to make the series better...

Quoted 1 line

Thank you!

Quoted 1 line
Quoted 1 line

}

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author reviewer
#14 lore raw

PATCH 4/9 i2c: designware: Propagate firmware node

In reply to Andy Shevchenko

Propagate firmware node by using a specific API call, i.e. device_set_node().

---
 drivers/i2c/busses/i2c-designware-core.h    | 6 ++++--
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 --
 drivers/i2c/busses/i2c-designware-platdrv.c | 2 --
 3 files changed, 4 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-designware-core.h +4 -2
index 03f4d44ae94c..f0c683ad860f 100644
@@ -10,11 +10,11 @@
  */
 
 #include <linux/bits.h>
-#include <linux/compiler_types.h>
 #include <linux/completion.h>
-#include <linux/dev_printk.h>
+#include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/types.h>
 
@@ -363,6 +363,8 @@ static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
 
 static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
+	device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));
+
 	switch (dev->mode) {
 	case DW_IC_SLAVE:
 		return i2c_dw_probe_slave(dev);
drivers/i2c/busses/i2c-designware-pcidrv.c +0 -2
index 7f5a04538c71..a42a47e0032d 100644
@@ -9,7 +9,6 @@
  * Copyright (C) 2009 Provigent Ltd.
  * Copyright (C) 2011, 2015, 2016 Intel Corporation.
  */
-#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/errno.h>
@@ -325,7 +324,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = 0;
-	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
 	adap->nr = controller->bus_num;
 
 	r = i2c_dw_probe(dev);
drivers/i2c/busses/i2c-designware-platdrv.c +0 -2
index d35a6bbcb6fb..512fb1d8ddfc 100644
@@ -357,8 +357,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap->owner = THIS_MODULE;
 	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
 					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
-	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
-	adap->dev.of_node = pdev->dev.of_node;
 	adap->nr = -1;
 
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
Signature · 1 line
2.40.0.1.gaa8946217a0b
#15 lore raw

Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node

Quoted 28 lines · Andy Shevchenko

Propagate firmware node by using a specific API call, i.e. device_set_node().

---
  drivers/i2c/busses/i2c-designware-core.h    | 6 ++++--
  drivers/i2c/busses/i2c-designware-pcidrv.c  | 2 --
  drivers/i2c/busses/i2c-designware-platdrv.c | 2 --
  3 files changed, 4 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-designware-core.h +2 -2
index 03f4d44ae94c..f0c683ad860f 100644
@@ -10,11 +10,11 @@
   */
 
  #include <linux/bits.h>
-#include <linux/compiler_types.h>
  #include <linux/completion.h>
-#include <linux/dev_printk.h>
+#include <linux/device.h>
  #include <linux/errno.h>
  #include <linux/i2c.h>
+#include <linux/property.h>
  #include <linux/regmap.h>
  #include <linux/types.h>
 

drivers/i2c/busses/i2c-designware-core.h static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } · line 367

Quoted 5 lines
drivers/i2c/busses/i2c-designware-core.h +2 -0
@@ -363,6 +363,8 @@ static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
 
  static inline int i2c_dw_probe(struct dw_i2c_dev *dev)
  {
+	device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));
+

Would this be better to put in the same place where ACPI_COMPANION_SET() is removed like below? I'd keep this static inline function in the header file as simple as possible. All extra code might invite adding even more.

Quoted 21 lines
drivers/i2c/busses/i2c-designware-core.h +0 -0
  	switch (dev->mode) {
  	case DW_IC_SLAVE:
  		return i2c_dw_probe_slave(dev);
drivers/i2c/busses/i2c-designware-pcidrv.c +0 -2
index 7f5a04538c71..a42a47e0032d 100644
@@ -9,7 +9,6 @@
   * Copyright (C) 2009 Provigent Ltd.
   * Copyright (C) 2011, 2015, 2016 Intel Corporation.
   */
-#include <linux/acpi.h>
  #include <linux/delay.h>
  #include <linux/err.h>
  #include <linux/errno.h>
@@ -325,7 +324,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
  	adap = &dev->adapter;
  	adap->owner = THIS_MODULE;
  	adap->class = 0;
-	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
  	adap->nr = controller->bus_num;
author reviewer
#16 lore raw

Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node

Quoted 2 lines · Jarkko Nikula
Quoted 1 line · Andy Shevchenko

Propagate firmware node by using a specific API call, i.e. device_set_node().

...

Quoted 5 lines

drivers/i2c/busses/i2c-designware-core.h static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } · line 366

Quoted 1 line
drivers/i2c/busses/i2c-designware-core.h +1 -0
+	device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));

Would this be better to put in the same place where ACPI_COMPANION_SET() is removed like below? I'd keep this static inline function in the header file as simple as possible. All extra code might invite adding even more.

We come again to the duplication and prone to deviation code, I wouldn't like to go this way. The idea of this call is to unify and avoid mistakes, like updating only in ACPI or DT (or any new one if happens in the future) case and leaving the second one unconsidered.

That said, I would rather drop this patch until i2c core will take this once for all (may be never in the reasonable future :-).

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#17 lore raw

Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node

Hi Andy,

Quoted 12 lines · Andy Shevchenko
Quoted 2 lines · Jarkko Nikula
Quoted 1 line · Andy Shevchenko

Propagate firmware node by using a specific API call, i.e. device_set_node().

...

Quoted 5 lines

drivers/i2c/busses/i2c-designware-core.h static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } · line 366

Quoted 1 line
drivers/i2c/busses/i2c-designware-core.h +1 -0
+	device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));

Would this be better to put in the same place where ACPI_COMPANION_SET() is removed like below? I'd keep this static inline function in the header file as simple as possible. All extra code might invite adding even more.

Quoted 4 lines

We come again to the duplication and prone to deviation code, I wouldn't like to go this way. The idea of this call is to unify and avoid mistakes, like updating only in ACPI or DT (or any new one if happens in the future) case and leaving the second one unconsidered.

it's anyway an inline function becoming a bit too fat. Can't we make it not inline?

Quoted 2 lines

That said, I would rather drop this patch until i2c core will take this once for all (may be never in the reasonable future :-).

Which patch are you referring to that should be taken into i2c core?

Andi

author reviewer
#18 lore raw

Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node

Quoted 4 lines · Andi Shyti
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Jarkko Nikula
Quoted 1 line · Andy Shevchenko

Propagate firmware node by using a specific API call, i.e. device_set_node().

...

Quoted 11 lines
Quoted 10 lines
Quoted 5 lines

drivers/i2c/busses/i2c-designware-core.h static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } · line 366

Quoted 1 line
drivers/i2c/busses/i2c-designware-core.h +1 -0
+	device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev));

Would this be better to put in the same place where ACPI_COMPANION_SET() is removed like below? I'd keep this static inline function in the header file as simple as possible. All extra code might invite adding even more.

We come again to the duplication and prone to deviation code, I wouldn't like to go this way. The idea of this call is to unify and avoid mistakes, like updating only in ACPI or DT (or any new one if happens in the future) case and leaving the second one unconsidered.

Quoted 8 lines

it's anyway an inline function becoming a bit too fat. Can't we make it not inline?

Quoted 2 lines

That said, I would rather drop this patch until i2c core will take this once for all (may be never in the reasonable future :-).

Which patch are you referring to that should be taken into i2c core?

Something I tried to do in the past but failed.
https://lore.kernel.org/linux-i2c/[email protected]/

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author reviewer
#19 lore raw

PATCH 5/9 i2c: designware: Always provide ID tables

In reply to Andy Shevchenko

There is no need to have ugly ifdeffery and additional macros for the ID tables. Always provide them. Since we touch the ACPI table, make it sorted by ID.

While at it, group MODULE_ALIAS() with other MODULE_*() macros.

---
 drivers/i2c/busses/i2c-designware-platdrv.c | 65 ++++++++++-----------
 1 file changed, 31 insertions(+), 34 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +31 -34
index 512fb1d8ddfc..d2ffd041c0c7 100644
@@ -40,28 +40,6 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 	return clk_get_rate(dev->clk) / KILO;
 }
 
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id dw_i2c_acpi_match[] = {
-	{ "INT33C2", 0 },
-	{ "INT33C3", 0 },
-	{ "INT3432", 0 },
-	{ "INT3433", 0 },
-	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
-	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
-	{ "AMD0010", ACCESS_INTR_MASK },
-	{ "AMDI0010", ACCESS_INTR_MASK },
-	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
-	{ "AMDI0510", 0 },
-	{ "APMC0D0F", 0 },
-	{ "HISI02A1", 0 },
-	{ "HISI02A2", 0 },
-	{ "HISI02A3", 0 },
-	{ "HYGO0010", ACCESS_INTR_MASK },
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
-#endif
-
 #ifdef CONFIG_OF
 #define BT1_I2C_CTL			0x100
 #define BT1_I2C_CTL_ADDR_MASK		GENMASK(7, 0)
@@ -152,14 +130,6 @@ static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
 	if (dev_of_node(dev->dev))
 		i2c_dw_of_do_configure(dev, dev->dev);
 }
-
-static const struct of_device_id dw_i2c_of_match[] = {
-	{ .compatible = "snps,designware-i2c", },
-	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
-	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
-	{},
-};
-MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #else
 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
@@ -485,16 +455,41 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 #define DW_I2C_DEV_PMOPS NULL
 #endif
 
-/* Work with hotplug and coldplug */
-MODULE_ALIAS("platform:i2c_designware");
+static const struct of_device_id dw_i2c_of_match[] = {
+	{ .compatible = "snps,designware-i2c", },
+	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
+	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
+
+static const struct acpi_device_id dw_i2c_acpi_match[] = {
+	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
+	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
+	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "AMDI0010", ACCESS_INTR_MASK },
+	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
+	{ "AMDI0510", 0 },
+	{ "APMC0D0F", 0 },
+	{ "HISI02A1", 0 },
+	{ "HISI02A2", 0 },
+	{ "HISI02A3", 0 },
+	{ "HYGO0010", ACCESS_INTR_MASK },
+	{ "INT33C2", 0 },
+	{ "INT33C3", 0 },
+	{ "INT3432", 0 },
+	{ "INT3433", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
 
 static struct platform_driver dw_i2c_driver = {
 	.probe = dw_i2c_plat_probe,
 	.remove_new = dw_i2c_plat_remove,
 	.driver		= {
 		.name	= "i2c_designware",
-		.of_match_table = of_match_ptr(dw_i2c_of_match),
-		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
+		.of_match_table = dw_i2c_of_match,
+		.acpi_match_table = dw_i2c_acpi_match,
 		.pm	= DW_I2C_DEV_PMOPS,
 	},
 };
@@ -511,6 +506,8 @@ static void __exit dw_i2c_exit_driver(void)
 }
 module_exit(dw_i2c_exit_driver);
 
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");
 MODULE_AUTHOR("Baruch Siach <[email protected]>");
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
 MODULE_LICENSE("GPL");
Signature · 1 line
2.40.0.1.gaa8946217a0b
Acked-by on v1 5/9
#20 lore raw

Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables

Quoted 11 lines · Andy Shevchenko

There is no need to have ugly ifdeffery and additional macros for the ID tables. Always provide them. Since we touch the ACPI table, make it sorted by ID.

While at it, group MODULE_ALIAS() with other MODULE_*() macros.

---
  drivers/i2c/busses/i2c-designware-platdrv.c | 65 ++++++++++-----------
  1 file changed, 31 insertions(+), 34 deletions(-)

(minor comment below if you plan to update)

drivers/i2c/busses/i2c-designware-platdrv.c static void __exit dw_i2c_exit_driver(void) · line 510

Quoted 2 lines
drivers/i2c/busses/i2c-designware-platdrv.c +2 -0
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");

Perhaps this comment can be retired, i.e. dropped.

author reviewer
#21 lore raw

Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables

Quoted 1 line · Jarkko Nikula

On 7/25/23 17:30, Andy Shevchenko wrote:

...

Quoted 4 lines

drivers/i2c/busses/i2c-designware-platdrv.c static void __exit dw_i2c_exit_driver(void) · line 510

Quoted 2 lines
drivers/i2c/busses/i2c-designware-platdrv.c +2 -0
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");

Perhaps this comment can be retired, i.e. dropped.

Then it needs to be done in a separate patch, because in the other file the comment will be left untouched.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer Reviewed-by
#22 lore raw

Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables

Hi Andy,

Quoted 5 lines · Andy Shevchenko
Quoted 1 line · Jarkko Nikula

On 7/25/23 17:30, Andy Shevchenko wrote:

...

Quoted 7 lines
Quoted 4 lines

drivers/i2c/busses/i2c-designware-platdrv.c static void __exit dw_i2c_exit_driver(void) · line 510

Quoted 2 lines
drivers/i2c/busses/i2c-designware-platdrv.c +2 -0
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");

Perhaps this comment can be retired, i.e. dropped.

Then it needs to be done in a separate patch, because in the other file the comment will be left untouched.

You are being a bit too religios here... if you want to stick to this, then you need to send a patch for sorting by ID, a patch for grouping together MODULE_*, a patch to remove this comment and a patch to always provide the id table.

I think, "while at it", you can safely remove the redundant comment :)

It doesn't make too much difference to me anyway:

Andi

author reviewer
#23 lore raw

Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables

Quoted 3 lines · Andi Shyti
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Jarkko Nikula

On 7/25/23 17:30, Andy Shevchenko wrote:

...

Quoted 9 lines
Quoted 7 lines
Quoted 4 lines

drivers/i2c/busses/i2c-designware-platdrv.c static void __exit dw_i2c_exit_driver(void) · line 510

Quoted 2 lines
drivers/i2c/busses/i2c-designware-platdrv.c +2 -0
+/* Work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");

Perhaps this comment can be retired, i.e. dropped.

Then it needs to be done in a separate patch, because in the other file the comment will be left untouched.

You are being a bit too religios here...

No, it's being consistent. Either we remove them both or don't touch.

Quoted 11 lines

if you want to stick to
this, then you need to send a patch for sorting by ID, a patch for grouping together MODULE_*, a patch to remove this comment and a patch to always provide the id table.

I think, "while at it", you can safely remove the redundant comment :)

It doesn't make too much difference to me anyway:

Thank you!

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author reviewer
#24 lore raw

PATCH 6/9 i2c: designware: Consolidate firmware parsing and configure code

In reply to Andy Shevchenko

We have two same code flows in the PCI and plaform drivers. Moreover, the flow requires the common code to export a few functions. Instead, consolidate that flow under new function called i2c_dw_fw_parse_and_configure() and drop unneeded exports.

---
 drivers/i2c/busses/i2c-designware-common.c  | 70 +++++++++++++++++++--
 drivers/i2c/busses/i2c-designware-core.h    |  9 +--
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 10 +--
 drivers/i2c/busses/i2c-designware-platdrv.c | 48 +-------------
 4 files changed, 68 insertions(+), 69 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +64 -6
index 222b530c0441..443426474cfc 100644
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/swab.h>
@@ -188,7 +189,7 @@ static const u32 supported_speeds[] = {
 	I2C_MAX_STANDARD_MODE_FREQ,
 };
 
-int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
+static int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
 {
 	struct i2c_timings *t = &dev->timings;
 	unsigned int i;
@@ -208,7 +209,49 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
 
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_validate_speed);
+
+#ifdef CONFIG_OF
+
+#include <linux/platform_device.h>
+
+#define MSCC_ICPU_CFG_TWI_DELAY		0x0
+#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
+#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4
+
+static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
+{
+	writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
+	       dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
+
+	return 0;
+}
+
+static void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device)
+{
+	struct platform_device *pdev = dev_is_platform(device) ? to_platform_device(device) : NULL;
+
+	switch (dev->flags & MODEL_MASK) {
+	case MODEL_MSCC_OCELOT:
+		dev->ext = devm_platform_ioremap_resource(pdev, 1);
+		if (!IS_ERR(dev->ext))
+			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
+		break;
+	default:
+		break;
+	}
+}
+
+static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
+{
+	if (dev_of_node(dev->dev))
+		i2c_dw_of_do_configure(dev, dev->dev);
+}
+
+#else	/* CONFIG_OF */
+
+static inline void i2c_dw_of_configure(struct dw_i2c_dev *dev) { }
+
+#endif	/* CONFIG_OF */
 
 #ifdef CONFIG_ACPI
 
@@ -286,12 +329,11 @@ static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *devi
 	}
 }
 
-void i2c_dw_acpi_configure(struct dw_i2c_dev *dev)
+static void i2c_dw_acpi_configure(struct dw_i2c_dev *dev)
 {
 	if (has_acpi_companion(dev->dev))
 		i2c_dw_acpi_do_configure(dev, dev->dev);
 }
-EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
 
 static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 {
@@ -313,11 +355,13 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 
 #else	/* CONFIG_ACPI */
 
+static inline void i2c_dw_acpi_configure(struct dw_i2c_dev *dev) { }
+
 static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
 
 #endif	/* CONFIG_ACPI */
 
-void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
+static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
 {
 	u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev);
 	struct i2c_timings *t = &dev->timings;
@@ -333,7 +377,21 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
 	else
 		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed);
+
+int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev)
+{
+	struct i2c_timings *t = &dev->timings;
+
+	i2c_parse_fw_timings(dev->dev, t, false);
+
+	i2c_dw_adjust_bus_speed(dev);
+
+	i2c_dw_of_configure(dev);
+	i2c_dw_acpi_configure(dev);
+
+	return i2c_dw_validate_speed(dev);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_fw_parse_and_configure);
 
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 {
drivers/i2c/busses/i2c-designware-core.h +1 -8
index f0c683ad860f..8547590fc91b 100644
@@ -392,11 +392,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);
 int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev);
 #endif
 
-int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
-void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
-
-#if IS_ENABLED(CONFIG_ACPI)
-void i2c_dw_acpi_configure(struct dw_i2c_dev *dev);
-#else
-static inline void i2c_dw_acpi_configure(struct dw_i2c_dev *dev) { }
-#endif
+int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev);
drivers/i2c/busses/i2c-designware-pcidrv.c +1 -9
index a42a47e0032d..28a60fdb9ca2 100644
@@ -252,7 +252,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	int r;
 	struct dw_pci_controller *controller;
 	struct dw_scl_sda_cfg *cfg;
-	struct i2c_timings *t;
 
 	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
 		return dev_err_probe(&pdev->dev, -EINVAL,
@@ -287,9 +286,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	dev->irq = pci_irq_vector(pdev, 0);
 	dev->flags |= controller->flags;
 
-	t = &dev->timings;
-	i2c_parse_fw_timings(&pdev->dev, t, false);
-
 	pci_set_drvdata(pdev, dev);
 
 	if (controller->setup) {
@@ -300,11 +296,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 		}
 	}
 
-	i2c_dw_adjust_bus_speed(dev);
-
-	i2c_dw_acpi_configure(dev);
-
-	r = i2c_dw_validate_speed(dev);
+	r = i2c_dw_fw_parse_and_configure(dev);
 	if (r) {
 		pci_free_irq_vectors(pdev);
 		return r;
drivers/i2c/busses/i2c-designware-platdrv.c +2 -46

83 lines not on this page · raw message

Signature · 1 line
2.40.0.1.gaa8946217a0b
maintainer Reviewed-by on v1 6/9
#25 lore raw

Re: [PATCH v1 6/9] i2c: designware: Consolidate firmware parsing and configure code

Hi Andy,

Quoted 6 lines · Andy Shevchenko

We have two same code flows in the PCI and plaform drivers. Moreover, the flow requires the common code to export a few functions. Instead, consolidate that flow under new function called i2c_dw_fw_parse_and_configure() and drop unneeded exports.

this is just some code refactoring... didn't see anything wrong here:

Andi

author reviewer
#26 lore raw

PATCH 7/9 i2c: desingware: Unify firmware type checks

In reply to Andy Shevchenko

Instead of asymmetrical checks for the firmware use is_*_node() calls. With that, drop now local wrappers against

---
 drivers/i2c/busses/i2c-designware-common.c | 23 +++++++---------------
 1 file changed, 7 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +7 -16
index 443426474cfc..e6df6a484955 100644
@@ -241,15 +241,9 @@ static void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device
 	}
 }
 
-static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
-{
-	if (dev_of_node(dev->dev))
-		i2c_dw_of_do_configure(dev, dev->dev);
-}
-
 #else	/* CONFIG_OF */
 
-static inline void i2c_dw_of_configure(struct dw_i2c_dev *dev) { }
+static inline void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device) { }
 
 #endif	/* CONFIG_OF */
 
@@ -329,12 +323,6 @@ static void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *devi
 	}
 }
 
-static void i2c_dw_acpi_configure(struct dw_i2c_dev *dev)
-{
-	if (has_acpi_companion(dev->dev))
-		i2c_dw_acpi_do_configure(dev, dev->dev);
-}
-
 static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 {
 	u32 acpi_speed;
@@ -355,7 +343,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 
 #else	/* CONFIG_ACPI */
 
-static inline void i2c_dw_acpi_configure(struct dw_i2c_dev *dev) { }
+static inline void i2c_dw_acpi_do_configure(struct dw_i2c_dev *dev, struct device *device) { }
 
 static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
 
@@ -380,14 +368,17 @@ static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
 
 int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev)
 {
+	struct fwnode_handle *fwnode = dev_fwnode(dev->dev);
 	struct i2c_timings *t = &dev->timings;
 
 	i2c_parse_fw_timings(dev->dev, t, false);
 
 	i2c_dw_adjust_bus_speed(dev);
 
-	i2c_dw_of_configure(dev);
-	i2c_dw_acpi_configure(dev);
+	if (is_of_node(fwnode))
+		i2c_dw_of_do_configure(dev, dev->dev);
+	else if (is_acpi_node(fwnode))
+		i2c_dw_acpi_do_configure(dev, dev->dev);
 
 	return i2c_dw_validate_speed(dev);
 }
Signature · 1 line
2.40.0.1.gaa8946217a0b
maintainer Reviewed-by on v1 7/9
#27 lore raw

Re: [PATCH v1 7/9] i2c: desingware: Unify firmware type checks

Hi Andy,

Quoted 13 lines · Andy Shevchenko

Instead of asymmetrical checks for the firmware use is_*_node() calls. With that, drop now local wrappers against

---
 drivers/i2c/busses/i2c-designware-common.c | 23 +++++++---------------
 1 file changed, 7 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +0 -0
index 443426474cfc..e6df6a484955 100644

drivers/i2c/busses/i2c-designware-common.c static void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device · line 249

Quoted 9 lines
drivers/i2c/busses/i2c-designware-common.c +0 -6
@@ -241,15 +241,9 @@ static void i2c_dw_of_do_configure(struct dw_i2c_dev *dev, struct device *device
 	}
 }
 
-static void i2c_dw_of_configure(struct dw_i2c_dev *dev)
-{
-	if (dev_of_node(dev->dev))
-		i2c_dw_of_do_configure(dev, dev->dev);
-}
-

I have to partially agree with Jarkko here, the patch splitting of this series is a bit too exotic. Series need to be understood by reading them forward, not backward.

Oversplitting sometimes might even reduce readability and "reviewability" (can I say so?). And this function, in seven patches, has been added, moved and removed, and I had to read the series twice :)

Anyway, I won't ask you to refactor the whole series, I understand your logic.

Andi

author reviewer
#28 lore raw

PATCH 8/9 i2c: designware: Get rid of redundant 'else'

In reply to Andy Shevchenko

In the snippets like the following

	if (...)
		return / goto / break / continue ...;
	else
		...

the 'else' is redundant. Get rid of it.

---
 drivers/i2c/busses/i2c-designware-common.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +3 -3
index e6df6a484955..de28dd66c5eb 100644
@@ -615,10 +615,10 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 
 	if (abort_source & DW_IC_TX_ARB_LOST)
 		return -EAGAIN;
-	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+	if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
 		return -EINVAL; /* wrong msgs[] data */
-	else
-		return -EIO;
+
+	return -EIO;
 }
 
 int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
Signature · 1 line
2.40.0.1.gaa8946217a0b
author reviewer
#30 lore raw

PATCH 9/9 i2c: designware: Fix spelling and other issues in the comments

In reply to Andy Shevchenko

Fix spelling and other issues, such as kernel doc reported about, in the comments.

---
 drivers/i2c/busses/i2c-designware-amdpsp.c | 10 +++++-----
 drivers/i2c/busses/i2c-designware-common.c |  8 +++++---
 drivers/i2c/busses/i2c-designware-core.h   | 10 +++++-----
 drivers/i2c/busses/i2c-designware-master.c | 15 +++++++++------
 drivers/i2c/busses/i2c-designware-slave.c  |  6 ++++--
 5 files changed, 28 insertions(+), 21 deletions(-)
drivers/i2c/busses/i2c-designware-amdpsp.c +5 -5
index 63454b06e5da..8fbd2a10c31a 100644
@@ -155,7 +155,7 @@ static void psp_release_i2c_bus_deferred(struct work_struct *work)
 
 	/*
 	 * If there is any pending transaction, cannot release the bus here.
-	 * psp_release_i2c_bus will take care of this later.
+	 * psp_release_i2c_bus() will take care of this later.
 	 */
 	if (psp_i2c_access_count)
 		goto cleanup;
@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void)
 {
 	mutex_lock(&psp_i2c_access_mutex);
 
-	/* Return early if mailbox was malfunctional */
+	/* Return early if mailbox was malfunctioned */
 	if (psp_i2c_mbox_fail)
 		goto cleanup;
 
 	/*
-	 * If we are last owner of PSP semaphore, need to release aribtration
+	 * If we are last owner of PSP semaphore, need to release arbitration
 	 * via mailbox.
 	 */
 	psp_i2c_access_count--;
@@ -235,9 +235,9 @@ static void psp_release_i2c_bus(void)
 
 /*
  * Locking methods are based on the default implementation from
- * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations
+ * drivers/i2c/i2c-core-base.c, but with PSP acquire and release operations
  * added. With this in place we can ensure that i2c clients on the bus shared
- * with psp are able to lock HW access to the bus for arbitrary number of
+ * with PSP are able to lock HW access to the bus for arbitrary number of
  * operations - that is e.g. write-wait-read.
  */
 static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
drivers/i2c/busses/i2c-designware-common.c +5 -3
index de28dd66c5eb..beb190f7d005 100644
@@ -123,6 +123,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)
  * Autodetects needed register access mode and creates the regmap with
  * corresponding read/write callbacks. This must be called before doing any
  * other register access.
+ *
+ * Return: 0 on success, or negative errno otherwise.
  */
 int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
 {
@@ -170,7 +172,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
 	/*
 	 * Note we'll check the return value of the regmap IO accessors only
 	 * at the probe stage. The rest of the code won't do this because
-	 * basically we have MMIO-based regmap so non of the read/write methods
+	 * basically we have MMIO-based regmap, so none of the read/write methods
 	 * can fail.
 	 */
 	dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg);
@@ -330,7 +332,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
 
 	acpi_speed = i2c_acpi_find_bus_speed(device);
 	/*
-	 * Some DSTDs use a non standard speed, round down to the lowest
+	 * Some DSDTs use a non standard speed, round down to the lowest
 	 * standard speed.
 	 */
 	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
@@ -508,7 +510,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
 
 		/*
 		 * Wait 10 times the signaling period of the highest I2C
-		 * transfer supported by the driver (for 400KHz this is
+		 * transfer supported by the driver (for 400kHz this is
 		 * 25us) as described in the DesignWare I2C databook.
 		 */
 		usleep_range(25, 250);
drivers/i2c/busses/i2c-designware-core.h +5 -5
index 8547590fc91b..8eb037298670 100644
@@ -139,10 +139,10 @@
 #define DW_IC_SLAVE				1
 
 /*
- * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register.
  *
- * Only expected abort codes are listed here
- * refer to the datasheet for the full list
+ * Only expected abort codes are listed here,
+ * refer to the datasheet for the full list.
  */
 #define ABRT_7B_ADDR_NOACK			0
 #define ABRT_10ADDR1_NOACK			1
@@ -197,7 +197,7 @@ struct reset_control;
  * @rst: optional reset for the controller
  * @slave: represent an I2C slave device
  * @get_clk_rate_khz: callback to retrieve IP specific bus speed
- * @cmd_err: run time hadware error code
+ * @cmd_err: run time hardware error code
  * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs array
@@ -232,7 +232,7 @@ struct reset_control;
  * @release_lock: function to release a hardware lock on the bus
  * @semaphore_idx: Index of table with semaphore type attached to the bus. It's
  *	-1 if there is no semaphore.
- * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
+ * @shared_with_punit: true if this bus is shared with the SoC's PUNIT
  * @disable: function to disable the controller
  * @init: function to initialize the I2C hardware
  * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
drivers/i2c/busses/i2c-designware-master.c +9 -6
index 3bfd7a2232db..e81c5b6188a6 100644
@@ -165,12 +165,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
 }
 
 /**
- * i2c_dw_init_master() - Initialize the designware I2C master hardware
+ * i2c_dw_init_master() - Initialize the DesignWare I2C master hardware
  * @dev: device private data
  *
  * This functions configures and enables the I2C master.
  * This function is called during I2C init function, and in case of timeout at
  * run time.
+ *
+ * Return: 0 on success, or negative errno otherwise.
  */
 static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 {
@@ -311,7 +313,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		/*
 		 * Initiate the i2c read/write transaction of buffer length,
 		 * and poll for bus busy status. For the last message transfer,
-		 * update the command with stopbit enable.
+		 * update the command with stop bit enable.
 		 */
 		for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) {
 			if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1)
@@ -418,7 +420,7 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg
 
 /*
  * Initiate (and continue) low level master read/write transaction.
- * This function is only called from i2c_dw_isr, and pumping i2c_msg
+ * This function is only called from i2c_dw_isr(), and pumping i2c_msg
  * messages into the tx buffer.  Even if the size of i2c_msg data is
  * longer than the size of the tx buffer, it handles everything.
  */
@@ -456,7 +458,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			buf = msgs[dev->msg_write_idx].buf;
 			buf_len = msgs[dev->msg_write_idx].len;
 
-			/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
+			/*
+			 * If both IC_EMPTYFIFO_HOLD_MASTER_EN and
 			 * IC_RESTART_EN are set, we must manually
 			 * set restart bit between messages.
 			 */
@@ -910,7 +913,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
 	rinfo->unprepare_recovery = i2c_dw_unprepare_recovery;
 	adap->bus_recovery_info = rinfo;
 
-	dev_info(dev->dev, "running with gpio recovery mode! scl%s",
+	dev_info(dev->dev, "running with GPIO recovery mode! scl%s",
 		 rinfo->sda_gpiod ? ",sda" : "");
 
 	return 0;
@@ -1015,7 +1018,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
 			       dev_name(dev->dev), dev);
 	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+		dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
 			dev->irq, ret);
 		return ret;
 	}
drivers/i2c/busses/i2c-designware-slave.c +4 -2
index 2e079cf20bb5..bb44f41efdfc 100644
@@ -30,12 +30,14 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
 }
 
 /**
- * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
+ * i2c_dw_init_slave() - Initialize the DesignWare i2c slave hardware
  * @dev: device private data
  *
  * This function configures and enables the I2C in slave mode.
  * This function is called during I2C init function, and in case of timeout at
  * run time.
+ *
+ * Return: 0 on success, or negative errno otherwise.
  */
 static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
 {
@@ -263,7 +265,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
 			       IRQF_SHARED, dev_name(dev->dev), dev);
 	if (ret) {
-		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+		dev_err(dev->dev, "failure requesting IRQ %i: %d\n",
 			dev->irq, ret);
 		return ret;
 	}
Signature · 1 line
2.40.0.1.gaa8946217a0b
maintainer
#31 lore raw

Re: [PATCH v1 9/9] i2c: designware: Fix spelling and other issues in the comments

Hi Andy,

[...]

drivers/i2c/busses/i2c-designware-amdpsp.c static void psp_release_i2c_bus(void) · line 213

Quoted 6 lines
drivers/i2c/busses/i2c-designware-amdpsp.c +1 -1
@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void)
 {
 	mutex_lock(&psp_i2c_access_mutex);
 
-	/* Return early if mailbox was malfunctional */
+	/* Return early if mailbox was malfunctioned */

I think "was malfunctioned" is not really correct... maybe "has malfunctioned"? "is malfunctioning"?

Quoted 2 lines
drivers/i2c/busses/i2c-designware-amdpsp.c +0 -0
 	if (psp_i2c_mbox_fail)
 		goto cleanup;

[...]

drivers/i2c/busses/i2c-designware-common.c void __i2c_dw_disable(struct dw_i2c_dev *dev) · line 513

Quoted 6 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
@@ -508,7 +510,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
 
 		/*
 		 * Wait 10 times the signaling period of the highest I2C
-		 * transfer supported by the driver (for 400KHz this is
+		 * transfer supported by the driver (for 400kHz this is

what did you change here? :)

The rest looks good.

Thanks,
Andi

Quoted 3 lines
drivers/i2c/busses/i2c-designware-common.c +0 -0
 		 * 25us) as described in the DesignWare I2C databook.
 		 */
 		usleep_range(25, 250);
author reviewer
#32 lore raw

Re: [PATCH v1 9/9] i2c: designware: Fix spelling and other issues in the comments

On Fri, Aug 04, 2023 at 11:41:57PM +0200, Andi Shyti wrote:

...

Quoted 9 lines

drivers/i2c/busses/i2c-designware-amdpsp.c static void psp_release_i2c_bus(void) · line 213

Quoted 6 lines
drivers/i2c/busses/i2c-designware-amdpsp.c +1 -1
@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void)
 {
 	mutex_lock(&psp_i2c_access_mutex);
 
-	/* Return early if mailbox was malfunctional */
+	/* Return early if mailbox was malfunctioned */

I think "was malfunctioned" is not really correct... maybe "has malfunctioned"? "is malfunctioning"?

I first stumbled over this, but than I read the function name... I guess they are correct. So I think I need to drop this hunk.

...

Quoted 4 lines

drivers/i2c/busses/i2c-designware-common.c void __i2c_dw_disable(struct dw_i2c_dev *dev) · line 513

Quoted 2 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
-		 * transfer supported by the driver (for 400KHz this is
+		 * transfer supported by the driver (for 400kHz this is

what did you change here? :)

Proper units. k is the official SI prefix for KILO.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#33 lore raw

Re: [PATCH v1 9/9] i2c: designware: Fix spelling and other issues in the comments

Quoted 8 lines · Andy Shevchenko

On Fri, Aug 04, 2023 at 11:41:57PM +0200, Andi Shyti wrote:

...

Quoted 4 lines
Quoted 4 lines
drivers/i2c/busses/i2c-designware-amdpsp.c +0 -0
@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void)
 {
 	mutex_lock(&psp_i2c_access_mutex);
 
Quoted 8 lines
Quoted 5 lines

drivers/i2c/busses/i2c-designware-amdpsp.c static void psp_release_i2c_bus(void) · line 213

Quoted 2 lines
drivers/i2c/busses/i2c-designware-amdpsp.c +1 -1
-	/* Return early if mailbox was malfunctional */
+	/* Return early if mailbox was malfunctioned */

I think "was malfunctioned" is not really correct... maybe "has malfunctioned"? "is malfunctioning"?

I first stumbled over this, but than I read the function name... I guess they are correct. So I think I need to drop this hunk.

"malfunctional" actually doesn't exist as a word. I think this is correct:

"Return early if the mailbox is malfunctioning"

Quoted 8 lines

...

Quoted 4 lines

drivers/i2c/busses/i2c-designware-common.c void __i2c_dw_disable(struct dw_i2c_dev *dev) · line 513

Quoted 2 lines
drivers/i2c/busses/i2c-designware-common.c +1 -1
-		 * transfer supported by the driver (for 400KHz this is
+		 * transfer supported by the driver (for 400kHz this is

what did you change here? :)

Proper units. k is the official SI prefix for KILO.

oh right! didn't see it :)

Thanks,
Andi

Reviewed-by on the v1 series
#34 lore raw
In reply to Andy Shevchenko
Quoted 15 lines · Andy Shevchenko

Mainly this is about firmware parsing and configuring code consolidation. Besides that some cleanups here and there.

Andy Shevchenko (9):
i2c: designware: Move has_acpi_companion() to common code
i2c: designware: Change i2c_dw_acpi_configure() prototype
i2c: designware: Align dw_i2c_of_configure() with

     i2c_dw_acpi_configure()

i2c: designware: Propagate firmware node
i2c: designware: Always provide ID tables
i2c: designware: Consolidate firmware parsing and configure code
i2c: desingware: Unify firmware type checks
i2c: designware: Get rid of redundant 'else'
i2c: designware: Fix spelling and other issues in the comments

Quoted 9 lines
  drivers/i2c/busses/i2c-designware-amdpsp.c  |  10 +-
  drivers/i2c/busses/i2c-designware-common.c  |  84 +++++++++++---
  drivers/i2c/busses/i2c-designware-core.h    |  25 ++---
  drivers/i2c/busses/i2c-designware-master.c  |  15 ++-
  drivers/i2c/busses/i2c-designware-pcidrv.c  |  13 +--
  drivers/i2c/busses/i2c-designware-platdrv.c | 117 ++++++--------------
  drivers/i2c/busses/i2c-designware-slave.c   |   6 +-
  7 files changed, 131 insertions(+), 139 deletions(-)