Skip to contentSkip to conversation

Enable vdpa net migration with features depending on CVQ

PATCH Superseded Eugenio Pérez 2 participants 14 messages Aug 10, 2023 – Aug 22, 2023 Networking

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Enable vdpa net migration with features depending on CVQ

At this moment the migration of net features that depends on CVQ is not possible, as there is no reliable way to restore the device state like mac address, number of enabled queues, etc to the destination. This is mainly caused because the device must only read CVQ, and process all the commands before resuming the dataplane.

This series lift that requirement, sending the VHOST_VDPA_SET_VRING_ENABLE ioctl for dataplane vqs only after the device has processed all commands.
---
From v1:
* Factor out VRING_ENABLE ioctls from vhost_vdpa_dev_start to the caller, instead of providing a callback to know if it must be called or not.
* at https://lists.nongnu.org/archive/html/qemu-devel/2023-07/msg05447.html

From FRC:
* Enable vqs early in case CVQ cannot be shadowed.
* at https://lists.gnu.org/archive/html/qemu-devel/2023-07/msg01325.html

Eugenio Pérez (5):
vdpa: use first queue SVQ state for CVQ default
vdpa: export vhost_vdpa_set_vring_ready
vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load
vdpa: move vhost_vdpa_set_vrings_ready to the caller
vdpa: remove net cvq migration blocker

 include/hw/virtio/vhost-vdpa.h |  1 +
 hw/virtio/vdpa-dev.c           |  3 ++
 hw/virtio/vhost-vdpa.c         | 22 +++++-----
 net/vhost-vdpa.c               | 75 +++++++++++++++++++---------------
 hw/virtio/trace-events         |  2 +-
 5 files changed, 57 insertions(+), 46 deletions(-)
Signature · 1 line
2.39.3
#1 lore raw

PATCH v2 1/5 vdpa: use first queue SVQ state for CVQ default

Previous to this patch the only way CVQ would be shadowed is if it does support to isolate CVQ group or if all vqs were shadowed from the beginning. The second condition was checked at the beginning, and no more configuration was done.

After this series we need to check if data queues are shadowed because they are in the middle of the migration. As checking if they are shadowed already covers the previous case, let's just mimic it.

---
 net/vhost-vdpa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/vhost-vdpa.c +1 -1
index 9795306742..a772540250 100644
@@ -505,7 +505,7 @@ static int vhost_vdpa_net_cvq_start(NetClientState *nc)
 
     s0 = vhost_vdpa_net_first_nc_vdpa(s);
     v->shadow_data = s0->vhost_vdpa.shadow_vqs_enabled;
-    v->shadow_vqs_enabled = s->always_svq;
+    v->shadow_vqs_enabled = s0->vhost_vdpa.shadow_vqs_enabled;
     s->vhost_vdpa.address_space_id = VHOST_VDPA_GUEST_PA_ASID;
 
     if (s->vhost_vdpa.shadow_data) {
Signature · 1 line
2.39.3
Acked-by on v2 1/5
#2 lore raw

Re: [PATCH v2 1/5] vdpa: use first queue SVQ state for CVQ default

Quoted 11 lines · Eugenio Pérez

Previous to this patch the only way CVQ would be shadowed is if it does support to isolate CVQ group or if all vqs were shadowed from the beginning. The second condition was checked at the beginning, and no more configuration was done.

After this series we need to check if data queues are shadowed because they are in the middle of the migration. As checking if they are shadowed already covers the previous case, let's just mimic it.

Thanks

Quoted 20 lines
---
 net/vhost-vdpa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/vhost-vdpa.c +1 -2
index 9795306742..a772540250 100644
@@ -505,7 +505,7 @@ static int vhost_vdpa_net_cvq_start(NetClientState *nc)
 
     s0 = vhost_vdpa_net_first_nc_vdpa(s);
     v->shadow_data = s0->vhost_vdpa.shadow_vqs_enabled;
-    v->shadow_vqs_enabled = s->always_svq;
+    v->shadow_vqs_enabled = s0->vhost_vdpa.shadow_vqs_enabled;
     s->vhost_vdpa.address_space_id = VHOST_VDPA_GUEST_PA_ASID;
 
     if (s->vhost_vdpa.shadow_data) {
--

2.39.3

#3 lore raw

PATCH v2 2/5 vdpa: export vhost_vdpa_set_vring_ready

In reply to Eugenio Pérez

The vhost-vdpa net backend needs to enable vrings in a different order than default, so export it.

No functional change intended except for tracing, that now includes the (virtio) index being enabled and the return value of the ioctl.

Still ignoring return value of this function if called from vhost_vdpa_dev_start, as reorganize calling code around it is out of the scope of this series.

---
 include/hw/virtio/vhost-vdpa.h |  1 +
 hw/virtio/vhost-vdpa.c         | 25 +++++++++++++------------
 hw/virtio/trace-events         |  2 +-
 3 files changed, 15 insertions(+), 13 deletions(-)
include/hw/virtio/vhost-vdpa.h +1 -0
index e64bfc7f98..5407d54fd7 100644
@@ -57,6 +57,7 @@ typedef struct vhost_vdpa {
 } VhostVDPA;
 
 int vhost_vdpa_get_iova_range(int fd, struct vhost_vdpa_iova_range *iova_range);
+int vhost_vdpa_set_vring_ready(struct vhost_vdpa *v, unsigned idx);
 
 int vhost_vdpa_dma_map(struct vhost_vdpa *v, uint32_t asid, hwaddr iova,
                        hwaddr size, void *vaddr, bool readonly);
hw/virtio/vhost-vdpa.c +13 -12
index 42f2a4bae9..0d9975b5b5 100644
@@ -876,18 +876,17 @@ static int vhost_vdpa_get_vq_index(struct vhost_dev *dev, int idx)
     return idx;
 }
 
-static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
+int vhost_vdpa_set_vring_ready(struct vhost_vdpa *v, unsigned idx)
 {
-    int i;
-    trace_vhost_vdpa_set_vring_ready(dev);
-    for (i = 0; i < dev->nvqs; ++i) {
-        struct vhost_vring_state state = {
-            .index = dev->vq_index + i,
-            .num = 1,
-        };
-        vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
-    }
-    return 0;
+    struct vhost_dev *dev = v->dev;
+    struct vhost_vring_state state = {
+        .index = idx,
+        .num = 1,
+    };
+    int r = vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
+
+    trace_vhost_vdpa_set_vring_ready(dev, idx, r);
+    return r;
 }
 
 static int vhost_vdpa_set_config_call(struct vhost_dev *dev,
@@ -1298,7 +1297,9 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        vhost_vdpa_set_vring_ready(dev);
+        for (int i = 0; i < dev->nvqs; ++i) {
+            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
+        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
hw/virtio/trace-events +1 -1
index 7109cf1a3b..1cb9027d1e 100644
@@ -48,7 +48,7 @@ vhost_vdpa_set_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRI
 vhost_vdpa_get_device_id(void *dev, uint32_t device_id) "dev: %p device_id %"PRIu32
 vhost_vdpa_reset_device(void *dev) "dev: %p"
 vhost_vdpa_get_vq_index(void *dev, int idx, int vq_idx) "dev: %p idx: %d vq idx: %d"
-vhost_vdpa_set_vring_ready(void *dev) "dev: %p"
+vhost_vdpa_set_vring_ready(void *dev, unsigned i, int r) "dev: %p, idx: %u, r: %d"
 vhost_vdpa_dump_config(void *dev, const char *line) "dev: %p %s"
 vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, uint32_t flags) "dev: %p offset: %"PRIu32" size: %"PRIu32" flags: 0x%"PRIx32
 vhost_vdpa_get_config(void *dev, void *config, uint32_t config_len) "dev: %p config: %p config_len: %"PRIu32
Signature · 1 line
2.39.3
Acked-by on v2 2/5
#4 lore raw

Re: [PATCH v2 2/5] vdpa: export vhost_vdpa_set_vring_ready

Quoted 4 lines · Eugenio Pérez

The vhost-vdpa net backend needs to enable vrings in a different order than default, so export it.

Quoted 8 lines

No functional change intended except for tracing, that now includes the (virtio) index being enabled and the return value of the ioctl.

Still ignoring return value of this function if called from vhost_vdpa_dev_start, as reorganize calling code around it is out of the scope of this series.

Thanks

Quoted 78 lines
---
 include/hw/virtio/vhost-vdpa.h |  1 +
 hw/virtio/vhost-vdpa.c         | 25 +++++++++++++------------
 hw/virtio/trace-events         |  2 +-
 3 files changed, 15 insertions(+), 13 deletions(-)
include/hw/virtio/vhost-vdpa.h +1 -0
index e64bfc7f98..5407d54fd7 100644
@@ -57,6 +57,7 @@ typedef struct vhost_vdpa {
 } VhostVDPA;
 
 int vhost_vdpa_get_iova_range(int fd, struct vhost_vdpa_iova_range *iova_range);
+int vhost_vdpa_set_vring_ready(struct vhost_vdpa *v, unsigned idx);
 
 int vhost_vdpa_dma_map(struct vhost_vdpa *v, uint32_t asid, hwaddr iova,
                        hwaddr size, void *vaddr, bool readonly);
hw/virtio/vhost-vdpa.c +13 -12
index 42f2a4bae9..0d9975b5b5 100644
@@ -876,18 +876,17 @@ static int vhost_vdpa_get_vq_index(struct vhost_dev *dev, int idx)
     return idx;
 }
 
-static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
+int vhost_vdpa_set_vring_ready(struct vhost_vdpa *v, unsigned idx)
 {
-    int i;
-    trace_vhost_vdpa_set_vring_ready(dev);
-    for (i = 0; i < dev->nvqs; ++i) {
-        struct vhost_vring_state state = {
-            .index = dev->vq_index + i,
-            .num = 1,
-        };
-        vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
-    }
-    return 0;
+    struct vhost_dev *dev = v->dev;
+    struct vhost_vring_state state = {
+        .index = idx,
+        .num = 1,
+    };
+    int r = vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
+
+    trace_vhost_vdpa_set_vring_ready(dev, idx, r);
+    return r;
 }
 
 static int vhost_vdpa_set_config_call(struct vhost_dev *dev,
@@ -1298,7 +1297,9 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        vhost_vdpa_set_vring_ready(dev);
+        for (int i = 0; i < dev->nvqs; ++i) {
+            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
+        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
hw/virtio/trace-events +1 -2
index 7109cf1a3b..1cb9027d1e 100644
@@ -48,7 +48,7 @@ vhost_vdpa_set_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRI
 vhost_vdpa_get_device_id(void *dev, uint32_t device_id) "dev: %p device_id %"PRIu32
 vhost_vdpa_reset_device(void *dev) "dev: %p"
 vhost_vdpa_get_vq_index(void *dev, int idx, int vq_idx) "dev: %p idx: %d vq idx: %d"
-vhost_vdpa_set_vring_ready(void *dev) "dev: %p"
+vhost_vdpa_set_vring_ready(void *dev, unsigned i, int r) "dev: %p, idx: %u, r: %d"
 vhost_vdpa_dump_config(void *dev, const char *line) "dev: %p %s"
 vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, uint32_t flags) "dev: %p offset: %"PRIu32" size: %"PRIu32" flags: 0x%"PRIx32
 vhost_vdpa_get_config(void *dev, void *config, uint32_t config_len) "dev: %p config: %p config_len: %"PRIu32
--

2.39.3

#5 lore raw

PATCH v2 3/5 vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load

In reply to Eugenio Pérez

Next patches will add the corresponding data load.

---
 net/vhost-vdpa.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/vhost-vdpa.c +2 -2
index a772540250..9251351b4b 100644
@@ -965,7 +965,7 @@ static int vhost_vdpa_net_load_rx(VhostVDPAState *s,
     return 0;
 }
 
-static int vhost_vdpa_net_load(NetClientState *nc)
+static int vhost_vdpa_net_cvq_load(NetClientState *nc)
 {
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
     struct vhost_vdpa *v = &s->vhost_vdpa;
@@ -1004,7 +1004,7 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {
     .size = sizeof(VhostVDPAState),
     .receive = vhost_vdpa_receive,
     .start = vhost_vdpa_net_cvq_start,
-    .load = vhost_vdpa_net_load,
+    .load = vhost_vdpa_net_cvq_load,
     .stop = vhost_vdpa_net_cvq_stop,
     .cleanup = vhost_vdpa_cleanup,
     .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
Signature · 1 line
2.39.3
Acked-by on v2 3/5
#6 lore raw

Re: [PATCH v2 3/5] vdpa: rename vhost_vdpa_net_load to vhost_vdpa_net_cvq_load

Quoted 4 lines · Eugenio Pérez

Next patches will add the corresponding data load.

Thanks

Quoted 29 lines
---
 net/vhost-vdpa.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/vhost-vdpa.c +2 -3
index a772540250..9251351b4b 100644
@@ -965,7 +965,7 @@ static int vhost_vdpa_net_load_rx(VhostVDPAState *s,
     return 0;
 }
 
-static int vhost_vdpa_net_load(NetClientState *nc)
+static int vhost_vdpa_net_cvq_load(NetClientState *nc)
 {
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
     struct vhost_vdpa *v = &s->vhost_vdpa;
@@ -1004,7 +1004,7 @@ static NetClientInfo net_vhost_vdpa_cvq_info = {
     .size = sizeof(VhostVDPAState),
     .receive = vhost_vdpa_receive,
     .start = vhost_vdpa_net_cvq_start,
-    .load = vhost_vdpa_net_load,
+    .load = vhost_vdpa_net_cvq_load,
     .stop = vhost_vdpa_net_cvq_stop,
     .cleanup = vhost_vdpa_cleanup,
     .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
--

2.39.3

#7 lore raw

PATCH v2 4/5 vdpa: move vhost_vdpa_set_vrings_ready to the caller

In reply to Eugenio Pérez

Doing that way allows CVQ to be enabled before the dataplane vqs, restoring the state as MQ or MAC addresses properly in the case of a migration.

---
 hw/virtio/vdpa-dev.c   |  3 +++
 hw/virtio/vhost-vdpa.c |  3 ---
 net/vhost-vdpa.c       | 57 +++++++++++++++++++++++++++++-------------
 3 files changed, 42 insertions(+), 21 deletions(-)
hw/virtio/vdpa-dev.c +3 -0
index 363b625243..f22d5d5bc0 100644
@@ -255,6 +255,9 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
         error_setg_errno(errp, -ret, "Error starting vhost");
         goto err_guest_notifiers;
     }
+    for (i = 0; i < s->dev.nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(&s->vdpa, i);
+    }
     s->started = true;
 
     /*
hw/virtio/vhost-vdpa.c +0 -3
index 0d9975b5b5..8ca2e3800c 100644
@@ -1297,9 +1297,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        for (int i = 0; i < dev->nvqs; ++i) {
-            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
-        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
net/vhost-vdpa.c +39 -18

77 lines not on this page · raw message

Signature · 1 line
2.39.3
#8 lore raw

Re: [PATCH v2 4/5] vdpa: move vhost_vdpa_set_vrings_ready to the caller

Quoted 5 lines · Eugenio Pérez

Doing that way allows CVQ to be enabled before the dataplane vqs, restoring the state as MQ or MAC addresses properly in the case of a migration.

A typo in the subject, should be vhost_vdpa_set_vring_ready.

Quoted 63 lines
---
 hw/virtio/vdpa-dev.c   |  3 +++
 hw/virtio/vhost-vdpa.c |  3 ---
 net/vhost-vdpa.c       | 57 +++++++++++++++++++++++++++++-------------
 3 files changed, 42 insertions(+), 21 deletions(-)
hw/virtio/vdpa-dev.c +3 -0
index 363b625243..f22d5d5bc0 100644
@@ -255,6 +255,9 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
         error_setg_errno(errp, -ret, "Error starting vhost");
         goto err_guest_notifiers;
     }
+    for (i = 0; i < s->dev.nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(&s->vdpa, i);
+    }
     s->started = true;
 
     /*
hw/virtio/vhost-vdpa.c +0 -3
index 0d9975b5b5..8ca2e3800c 100644
@@ -1297,9 +1297,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        for (int i = 0; i < dev->nvqs; ++i) {
-            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
-        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
net/vhost-vdpa.c +16 -0
index 9251351b4b..3bf60f9431 100644
@@ -371,6 +371,22 @@ static int vhost_vdpa_net_data_start(NetClientState *nc)
     return 0;
 }
 
+static int vhost_vdpa_net_data_load(NetClientState *nc)
+{
+    VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
+    struct vhost_vdpa *v = &s->vhost_vdpa;
+    bool has_cvq = v->dev->vq_index_end % 2;
+
+    if (has_cvq) {
+        return 0;
+    }
+
+    for (int i = 0; i < v->dev->nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+    }
+    return 0;
+}
+
 static void vhost_vdpa_net_client_stop(NetClientState *nc)
 {
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);

net/vhost-vdpa.c static NetClientInfo net_vhost_vdpa_info = { · line 412

Quoted 4 lines
net/vhost-vdpa.c +1 -0
@@ -393,6 +409,7 @@ static NetClientInfo net_vhost_vdpa_info = {
         .size = sizeof(VhostVDPAState),
         .receive = vhost_vdpa_receive,
         .start = vhost_vdpa_net_data_start,
+        .load = vhost_vdpa_net_data_load,

This deserve an independent patch?

Thanks

Quoted 55 lines
net/vhost-vdpa.c +22 -19
         .stop = vhost_vdpa_net_client_stop,
         .cleanup = vhost_vdpa_cleanup,
         .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
@@ -974,26 +991,30 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
 
     assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
 
-    if (!v->shadow_vqs_enabled) {
-        return 0;
-    }
+    vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
 
-    n = VIRTIO_NET(v->dev->vdev);
-    r = vhost_vdpa_net_load_mac(s, n);
-    if (unlikely(r < 0)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_mq(s, n);
-    if (unlikely(r)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_offloads(s, n);
-    if (unlikely(r)) {
-        return r;
+    if (v->shadow_vqs_enabled) {
+        n = VIRTIO_NET(v->dev->vdev);
+        r = vhost_vdpa_net_load_mac(s, n);
+        if (unlikely(r < 0)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_mq(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_offloads(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_rx(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
     }
-    r = vhost_vdpa_net_load_rx(s, n);
-    if (unlikely(r)) {
-        return r;
+
+    for (int i = 0; i < v->dev->vq_index; ++i) {
+        vhost_vdpa_set_vring_ready(v, i);
     }
 
     return 0;
--

2.39.3

#9 lore raw

Re: [PATCH v2 4/5] vdpa: move vhost_vdpa_set_vrings_ready to the caller

Quoted 9 lines · Jason Wang
Quoted 5 lines · Eugenio Pérez

Doing that way allows CVQ to be enabled before the dataplane vqs, restoring the state as MQ or MAC addresses properly in the case of a migration.

A typo in the subject, should be vhost_vdpa_set_vring_ready.

I'll fix it in the next version, thanks!

Quoted 62 lines
Quoted 62 lines
---
 hw/virtio/vdpa-dev.c   |  3 +++
 hw/virtio/vhost-vdpa.c |  3 ---
 net/vhost-vdpa.c       | 57 +++++++++++++++++++++++++++++-------------
 3 files changed, 42 insertions(+), 21 deletions(-)
hw/virtio/vdpa-dev.c +3 -0
index 363b625243..f22d5d5bc0 100644
@@ -255,6 +255,9 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
         error_setg_errno(errp, -ret, "Error starting vhost");
         goto err_guest_notifiers;
     }
+    for (i = 0; i < s->dev.nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(&s->vdpa, i);
+    }
     s->started = true;
 
     /*
hw/virtio/vhost-vdpa.c +0 -3
index 0d9975b5b5..8ca2e3800c 100644
@@ -1297,9 +1297,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        for (int i = 0; i < dev->nvqs; ++i) {
-            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
-        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
net/vhost-vdpa.c +16 -0
index 9251351b4b..3bf60f9431 100644
@@ -371,6 +371,22 @@ static int vhost_vdpa_net_data_start(NetClientState *nc)
     return 0;
 }
 
+static int vhost_vdpa_net_data_load(NetClientState *nc)
+{
+    VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
+    struct vhost_vdpa *v = &s->vhost_vdpa;
+    bool has_cvq = v->dev->vq_index_end % 2;
+
+    if (has_cvq) {
+        return 0;
+    }
+
+    for (int i = 0; i < v->dev->nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+    }
+    return 0;
+}
+
 static void vhost_vdpa_net_client_stop(NetClientState *nc)
 {
Quoted 9 lines

net/vhost-vdpa.c static NetClientInfo net_vhost_vdpa_info = { · line 412

Quoted 6 lines
net/vhost-vdpa.c +1 -0
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
@@ -393,6 +409,7 @@ static NetClientInfo net_vhost_vdpa_info = {
         .size = sizeof(VhostVDPAState),
         .receive = vhost_vdpa_receive,
         .start = vhost_vdpa_net_data_start,
+        .load = vhost_vdpa_net_data_load,

This deserve an independent patch?

Do you mean to add another callback op? What name does it work?

Thanks!

Quoted 58 lines

Thanks

Quoted 55 lines
net/vhost-vdpa.c +22 -19
         .stop = vhost_vdpa_net_client_stop,
         .cleanup = vhost_vdpa_cleanup,
         .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
@@ -974,26 +991,30 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
 
     assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
 
-    if (!v->shadow_vqs_enabled) {
-        return 0;
-    }
+    vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
 
-    n = VIRTIO_NET(v->dev->vdev);
-    r = vhost_vdpa_net_load_mac(s, n);
-    if (unlikely(r < 0)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_mq(s, n);
-    if (unlikely(r)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_offloads(s, n);
-    if (unlikely(r)) {
-        return r;
+    if (v->shadow_vqs_enabled) {
+        n = VIRTIO_NET(v->dev->vdev);
+        r = vhost_vdpa_net_load_mac(s, n);
+        if (unlikely(r < 0)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_mq(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_offloads(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_rx(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
     }
-    r = vhost_vdpa_net_load_rx(s, n);
-    if (unlikely(r)) {
-        return r;
+
+    for (int i = 0; i < v->dev->vq_index; ++i) {
+        vhost_vdpa_set_vring_ready(v, i);
     }
 
     return 0;
--

2.39.3

#10 lore raw

Re: [PATCH v2 4/5] vdpa: move vhost_vdpa_set_vrings_ready to the caller

In reply to Jason Wang
Quoted 71 lines · Jason Wang
Quoted 5 lines · Eugenio Pérez

Doing that way allows CVQ to be enabled before the dataplane vqs, restoring the state as MQ or MAC addresses properly in the case of a migration.

A typo in the subject, should be vhost_vdpa_set_vring_ready.

Quoted 61 lines
---
 hw/virtio/vdpa-dev.c   |  3 +++
 hw/virtio/vhost-vdpa.c |  3 ---
 net/vhost-vdpa.c       | 57 +++++++++++++++++++++++++++++-------------
 3 files changed, 42 insertions(+), 21 deletions(-)
hw/virtio/vdpa-dev.c +3 -0
index 363b625243..f22d5d5bc0 100644
@@ -255,6 +255,9 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
         error_setg_errno(errp, -ret, "Error starting vhost");
         goto err_guest_notifiers;
     }
+    for (i = 0; i < s->dev.nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(&s->vdpa, i);
+    }
     s->started = true;
 
     /*
hw/virtio/vhost-vdpa.c +0 -3
index 0d9975b5b5..8ca2e3800c 100644
@@ -1297,9 +1297,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        for (int i = 0; i < dev->nvqs; ++i) {
-            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
-        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
net/vhost-vdpa.c +16 -0
index 9251351b4b..3bf60f9431 100644
@@ -371,6 +371,22 @@ static int vhost_vdpa_net_data_start(NetClientState *nc)
     return 0;
 }
 
+static int vhost_vdpa_net_data_load(NetClientState *nc)
+{
+    VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
+    struct vhost_vdpa *v = &s->vhost_vdpa;
+    bool has_cvq = v->dev->vq_index_end % 2;
+
+    if (has_cvq) {
+        return 0;
+    }
+
+    for (int i = 0; i < v->dev->nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+    }
+    return 0;
+}
+
 static void vhost_vdpa_net_client_stop(NetClientState *nc)
 {
Quoted 9 lines

net/vhost-vdpa.c static NetClientInfo net_vhost_vdpa_info = { · line 412

Quoted 6 lines
net/vhost-vdpa.c +1 -0
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
@@ -393,6 +409,7 @@ static NetClientInfo net_vhost_vdpa_info = {
         .size = sizeof(VhostVDPAState),
         .receive = vhost_vdpa_receive,
         .start = vhost_vdpa_net_data_start,
+        .load = vhost_vdpa_net_data_load,

This deserve an independent patch?

Ok so I misread your reply.

An independent patch would just add a stub vhost_vdpa_net_data_load, since it's its only purpose. I can add that to the patch message in the next version.

Thanks!

Quoted 58 lines

Thanks

Quoted 55 lines
net/vhost-vdpa.c +22 -19
         .stop = vhost_vdpa_net_client_stop,
         .cleanup = vhost_vdpa_cleanup,
         .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
@@ -974,26 +991,30 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
 
     assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
 
-    if (!v->shadow_vqs_enabled) {
-        return 0;
-    }
+    vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
 
-    n = VIRTIO_NET(v->dev->vdev);
-    r = vhost_vdpa_net_load_mac(s, n);
-    if (unlikely(r < 0)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_mq(s, n);
-    if (unlikely(r)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_offloads(s, n);
-    if (unlikely(r)) {
-        return r;
+    if (v->shadow_vqs_enabled) {
+        n = VIRTIO_NET(v->dev->vdev);
+        r = vhost_vdpa_net_load_mac(s, n);
+        if (unlikely(r < 0)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_mq(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_offloads(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_rx(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
     }
-    r = vhost_vdpa_net_load_rx(s, n);
-    if (unlikely(r)) {
-        return r;
+
+    for (int i = 0; i < v->dev->vq_index; ++i) {
+        vhost_vdpa_set_vring_ready(v, i);
     }
 
     return 0;
--

2.39.3

#11 lore raw

Re: [PATCH v2 4/5] vdpa: move vhost_vdpa_set_vrings_ready to the caller

Quoted 83 lines · Eugenio Perez Martin
Quoted 71 lines · Jason Wang
Quoted 5 lines · Eugenio Pérez

Doing that way allows CVQ to be enabled before the dataplane vqs, restoring the state as MQ or MAC addresses properly in the case of a migration.

A typo in the subject, should be vhost_vdpa_set_vring_ready.

Quoted 61 lines
---
 hw/virtio/vdpa-dev.c   |  3 +++
 hw/virtio/vhost-vdpa.c |  3 ---
 net/vhost-vdpa.c       | 57 +++++++++++++++++++++++++++++-------------
 3 files changed, 42 insertions(+), 21 deletions(-)
hw/virtio/vdpa-dev.c +3 -0
index 363b625243..f22d5d5bc0 100644
@@ -255,6 +255,9 @@ static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
         error_setg_errno(errp, -ret, "Error starting vhost");
         goto err_guest_notifiers;
     }
+    for (i = 0; i < s->dev.nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(&s->vdpa, i);
+    }
     s->started = true;
 
     /*
hw/virtio/vhost-vdpa.c +0 -3
index 0d9975b5b5..8ca2e3800c 100644
@@ -1297,9 +1297,6 @@ static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started)
         if (unlikely(!ok)) {
             return -1;
         }
-        for (int i = 0; i < dev->nvqs; ++i) {
-            vhost_vdpa_set_vring_ready(v, dev->vq_index + i);
-        }
     } else {
         vhost_vdpa_suspend(dev);
         vhost_vdpa_svqs_stop(dev);
net/vhost-vdpa.c +16 -0
index 9251351b4b..3bf60f9431 100644
@@ -371,6 +371,22 @@ static int vhost_vdpa_net_data_start(NetClientState *nc)
     return 0;
 }
 
+static int vhost_vdpa_net_data_load(NetClientState *nc)
+{
+    VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
+    struct vhost_vdpa *v = &s->vhost_vdpa;
+    bool has_cvq = v->dev->vq_index_end % 2;
+
+    if (has_cvq) {
+        return 0;
+    }
+
+    for (int i = 0; i < v->dev->nvqs; ++i) {
+        vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
+    }
+    return 0;
+}
+
 static void vhost_vdpa_net_client_stop(NetClientState *nc)
 {
Quoted 9 lines

net/vhost-vdpa.c static NetClientInfo net_vhost_vdpa_info = { · line 412

Quoted 6 lines
net/vhost-vdpa.c +1 -0
     VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
@@ -393,6 +409,7 @@ static NetClientInfo net_vhost_vdpa_info = {
         .size = sizeof(VhostVDPAState),
         .receive = vhost_vdpa_receive,
         .start = vhost_vdpa_net_data_start,
+        .load = vhost_vdpa_net_data_load,

This deserve an independent patch?

Quoted 5 lines

Ok so I misread your reply.

An independent patch would just add a stub vhost_vdpa_net_data_load, since it's its only purpose. I can add that to the patch message in the next version.

Fine with me.

Thanks

Quoted 62 lines

Thanks!

Quoted 58 lines

Thanks

Quoted 55 lines
net/vhost-vdpa.c +22 -19
         .stop = vhost_vdpa_net_client_stop,
         .cleanup = vhost_vdpa_cleanup,
         .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
@@ -974,26 +991,30 @@ static int vhost_vdpa_net_cvq_load(NetClientState *nc)
 
     assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
 
-    if (!v->shadow_vqs_enabled) {
-        return 0;
-    }
+    vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
 
-    n = VIRTIO_NET(v->dev->vdev);
-    r = vhost_vdpa_net_load_mac(s, n);
-    if (unlikely(r < 0)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_mq(s, n);
-    if (unlikely(r)) {
-        return r;
-    }
-    r = vhost_vdpa_net_load_offloads(s, n);
-    if (unlikely(r)) {
-        return r;
+    if (v->shadow_vqs_enabled) {
+        n = VIRTIO_NET(v->dev->vdev);
+        r = vhost_vdpa_net_load_mac(s, n);
+        if (unlikely(r < 0)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_mq(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_offloads(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
+        r = vhost_vdpa_net_load_rx(s, n);
+        if (unlikely(r)) {
+            return r;
+        }
     }
-    r = vhost_vdpa_net_load_rx(s, n);
-    if (unlikely(r)) {
-        return r;
+
+    for (int i = 0; i < v->dev->vq_index; ++i) {
+        vhost_vdpa_set_vring_ready(v, i);
     }
 
     return 0;
--

2.39.3

#12 lore raw

PATCH v2 5/5 vdpa: remove net cvq migration blocker

In reply to Eugenio Pérez

Now that we have add migration blockers if the device does not support all the needed features, remove the general blocker applied to all net devices with CVQ.

---
 net/vhost-vdpa.c | 12 ------------
 1 file changed, 12 deletions(-)
net/vhost-vdpa.c +0 -12
index 3bf60f9431..6bb56f7d94 100644
@@ -1413,18 +1413,6 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
         s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops;
         s->vhost_vdpa.shadow_vq_ops_opaque = s;
         s->cvq_isolated = cvq_isolated;
-
-        /*
-         * TODO: We cannot migrate devices with CVQ and no x-svq enabled as
-         * there is no way to set the device state (MAC, MQ, etc) before
-         * starting the datapath.
-         *
-         * Migration blocker ownership now belongs to s->vhost_vdpa.
-         */
-        if (!svq) {
-            error_setg(&s->vhost_vdpa.migration_blocker,
-                       "net vdpa cannot migrate with CVQ feature");
-        }
     }
     ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
     if (ret) {
Signature · 1 line
2.39.3
Acked-by on v2 5/5
#13 lore raw

Re: [PATCH v2 5/5] vdpa: remove net cvq migration blocker

Quoted 6 lines · Eugenio Pérez

Now that we have add migration blockers if the device does not support all the needed features, remove the general blocker applied to all net devices with CVQ.

Thanks

Quoted 30 lines
---
 net/vhost-vdpa.c | 12 ------------
 1 file changed, 12 deletions(-)
net/vhost-vdpa.c +0 -13
index 3bf60f9431..6bb56f7d94 100644
@@ -1413,18 +1413,6 @@ static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
         s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops;
         s->vhost_vdpa.shadow_vq_ops_opaque = s;
         s->cvq_isolated = cvq_isolated;
-
-        /*
-         * TODO: We cannot migrate devices with CVQ and no x-svq enabled as
-         * there is no way to set the device state (MAC, MQ, etc) before
-         * starting the datapath.
-         *
-         * Migration blocker ownership now belongs to s->vhost_vdpa.
-         */
-        if (!svq) {
-            error_setg(&s->vhost_vdpa.migration_blocker,
-                       "net vdpa cannot migrate with CVQ feature");
-        }
     }
     ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
     if (ret) {
--

2.39.3