Add support for PMICs used on Tegra 3 devices
v6 cover Add support for PMICs used on Tegra 3 devices
Patch set adds basic support for PMICs used in many Tegra 3 devices. All PMIC drivers are based on datasheets provided by vendors. Implemented API include regulator set/get voltage enable/disable and basic PMIC r/w capabilities.
Drivers were tested by me on LG P895 (max77663), HTC One X (TPS80032) and ASUS TF300T (tps65911). Calculations and behavior were correct, predictable and reproducible.
Poweroff functional will be added after this basic drivers are merged.
---
Changes from v5:
- pass tps6591x regulator children directly via udevice_id data field
Changes from v4:
- used private structure for TPS80031 SPMS driver so that internal flags do not interfere with those from dm_regulator_uclass_plat
- fixed detection on ldoln and ldousb for palmas ldo driver
Changes from v3:
- expanded descriptions in Kconfigs for pmics and regulators
- replaced ret with other variable name if it is not used for return
- dropped prefixed with pmic name
- dropped () in ~(var) type expressions
- return dm_i2c_* output in pmic_read/write functions
- switched to log_debug in some places
- added descryptions for some "non obvious" functions
- fixed tps80031 spms voltage calculation in non linear region
- adjsuted tps65911 vio voltage calculation
Changes from v2:
- removed all previously made poweroff API in favour to use sysreset after this patchset is accepted
Changes from v1:
- created poweroff API for PMIC and integrated it call into do_poweroff
- added poweroff function to submitted max77663, tps80032 and tps65911 drivers
- fixed registers asignments for regulators with non-numeric name (ldoln, ldousb, vddctrl)
---
Svyatoslav Ryhel (8):
power: pmic: palmas: support TI TPS65913 PMIC
power: regulator: palmas: fix ldoln and ldousb detection
power: pmic: add the base MAX77663 PMIC support
power: regulator: max77663: add regulator support
power: pmic: add the base TPS80031 PMIC support
power: regulator: tps80031: add regulator support
power: pmic: tps65910: add TPS65911 PMIC support
power: regulator: tps65911: add regulator support
doc/device-tree-bindings/pmic/max77663.txt | 84 ++++ doc/device-tree-bindings/pmic/tps65911.txt | 78 ++++ doc/device-tree-bindings/pmic/tps80031.txt | 76 ++++ drivers/power/pmic/Kconfig | 20 + drivers/power/pmic/Makefile | 2 + drivers/power/pmic/max77663.c | 86 ++++ drivers/power/pmic/palmas.c | 1 + drivers/power/pmic/pmic_tps65910_dm.c | 15 +- drivers/power/pmic/tps80031.c | 87 ++++ drivers/power/regulator/Kconfig | 28 ++ drivers/power/regulator/Makefile | 3 + drivers/power/regulator/max77663_regulator.c | 378 ++++++++++++++++++ drivers/power/regulator/palmas_regulator.c | 24 +- drivers/power/regulator/tps65911_regulator.c | 397 +++++++++++++++++++ drivers/power/regulator/tps80031_regulator.c | 350 ++++++++++++++++ include/power/max77663.h | 42 ++ include/power/tps65910_pmic.h | 44 ++ include/power/tps80031.h | 45 +++ 18 files changed, 1747 insertions(+), 13 deletions(-) create mode 100644 doc/device-tree-bindings/pmic/max77663.txt create mode 100644 doc/device-tree-bindings/pmic/tps65911.txt create mode 100644 doc/device-tree-bindings/pmic/tps80031.txt create mode 100644 drivers/power/pmic/max77663.c create mode 100644 drivers/power/pmic/tps80031.c create mode 100644 drivers/power/regulator/max77663_regulator.c create mode 100644 drivers/power/regulator/tps65911_regulator.c create mode 100644 drivers/power/regulator/tps80031_regulator.c create mode 100644 include/power/max77663.h create mode 100644 include/power/tps80031.h
Signature · 1 line
2.39.2
PATCH v6 1/8 power: pmic: palmas: support TI TPS65913 PMIC
Existing PALMAS PMIC driver is fully compatible with TI TPS65913 PMIC found in many Tegra 4 devices, like Tegra Note 7 and ASUS TF701T. TPS65913 shares same structure of regulators like TPS659038 so data can be reused.
--- drivers/power/pmic/palmas.c | 1 + 1 file changed, 1 insertion(+)
drivers/power/pmic/palmas.c +1 -0
@@ -87,6 +87,7 @@ static struct dm_pmic_ops palmas_ops = {static const struct udevice_id palmas_ids[] = { { .compatible ="ti,tps659038" , .data =TPS659038 }, + { .compatible ="ti,tps65913" , .data =TPS659038 }, { .compatible ="ti,tps65917" , .data =TPS65917 }, { } };
Signature · 1 line
2.39.2
PATCH v6 2/8 power: regulator: palmas: fix ldoln and ldousb detection
In reply to Svyatoslav Ryheldev->driver_data will carry the tail of ldo if there is a number and if there is no number it will be an error code, anyway it will not be zero. This results in a wrong ldo regulator detection.
To avoid this check for non-numerical ldo first and then manipulate dev->driver_data.
--- drivers/power/regulator/palmas_regulator.c | 24 +++++++++++++--------- 1 file changed, 14 insertions(+), 10 deletions(-)
drivers/power/regulator/palmas_regulator.c +14 -10
@@ -301,19 +301,23 @@ static int palmas_ldo_probe(struct udevice *dev) uc_pdata->type =REGULATOR_TYPE_LDO ; -if (dev->driver_data) { +/* check for ldoln and ldousb cases */ +if (!strcmp ("ldoln" , dev->name)) { + uc_pdata->ctrl_reg = palmas_ldo_ctrl[type][9 ]; + uc_pdata->volt_reg = palmas_ldo_volt[type][9 ]; +return 0 ; + } + +if (!strcmp ("ldousb" , dev->name)) { + uc_pdata->ctrl_reg = palmas_ldo_ctrl[type][10 ]; + uc_pdata->volt_reg = palmas_ldo_volt[type][10 ]; +return 0 ; + } + +if (dev->driver_data >0 ) {u8 idx = dev->driver_data -1 ; uc_pdata->ctrl_reg = palmas_ldo_ctrl[type][idx]; uc_pdata->volt_reg = palmas_ldo_volt[type][idx]; - }else { -/* check for ldoln and ldousb cases */ -if (!strcmp ("ldoln" , dev->name)) { - uc_pdata->ctrl_reg = palmas_ldo_ctrl[type][9 ]; - uc_pdata->volt_reg = palmas_ldo_volt[type][9 ]; - }else if (!strcmp ("ldousb" , dev->name)) { - uc_pdata->ctrl_reg = palmas_ldo_ctrl[type][10 ]; - uc_pdata->volt_reg = palmas_ldo_volt[type][10 ]; - } }return 0 ;
Signature · 1 line
2.39.2
PATCH v6 3/8 power: pmic: add the base MAX77663 PMIC support
In reply to Svyatoslav RyhelAdd support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers.
--- doc/device-tree-bindings/pmic/max77663.txt | 84 +++++++++++++++++++++ drivers/power/pmic/Kconfig | 9 +++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/max77663.c | 86 ++++++++++++++++++++++ include/power/max77663.h | 42 +++++++++++ 5 files changed, 222 insertions(+) create mode 100644 doc/device-tree-bindings/pmic/max77663.txt create mode 100644 drivers/power/pmic/max77663.c create mode 100644 include/power/max77663.h
doc/device-tree-bindings/pmic/max77663.txt new file +84 -0
@@ -0,0 +1,84 @@ +MAXIM, MAX77663 PMIC + +This device uses two drivers: +- drivers/power/pmic/max77663.c (for parent device) +- drivers/power/regulator/max77663_regulator.c (for child regulators) + +This chapter describes the binding info for the PMIC driver and regulators. + +Required properties for PMIC: +- compatible: "maxim,max77663" +- reg: usually 0x1c or 0x3c + +With those two properties, the pmic device can be used for read/write only. +To bind each regulator, the optional regulators subnode should exists. + +Optional subnode: +- name: regulators (subnode list of each device's regulator) + +Regulators subnode contains set on supported regulators. + +Required properties: +- regulator-name: used for regulator uclass platform data '.name', + +List of supported regulator nodes names for max77663: +- sd0, sd1, sd2, sd3, ldo0, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8 + +Optional: +- regulator-min-microvolt: minimum allowed Voltage to set +- regulator-max-microvolt: minimum allowed Voltage to set +- regulator-always-on: regulator should be never disabled +- regulator-boot-on: regulator should be enabled by the bootloader + +Linux driver binding for this driver is compatible. + +Example: + +max77663@1c { + compatible = "maxim,max77663"; + reg = <0x1c>; + + regulators { + sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + ... + + ldo0 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ... + + ldo2 { + regulator-name = "avdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vdd_sdmmc3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ... + + ldo8 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +};
drivers/power/pmic/Kconfig +9 -0
@@ -184,6 +184,15 @@ config SPL_DM_PMIC_PFUZE100 This config enables implementation of driver-model pmic uclass features for PMIC PFUZE100 in SPL. The driver implements read/write operations. +config DM_PMIC_MAX77663 + bool "Enable Driver Model for PMIC MAX77663" + ---help--- + This config enables implementation of driver-model pmic uclass features + for PMIC MAX77663. The driver implements read/write operations. + This is a Power Management IC with a decent set of peripherals from which + 4 DC-to-DC Step-Down (SD) Regulators, 9 Low-Dropout Linear (LDO) Regulators, + 8 GPIOs, Real-Time Clock (RTC) and more with I2C Compatible Interface. + config DM_PMIC_MAX77686 bool "Enable Driver Model for PMIC MAX77686" ---help---
drivers/power/pmic/Makefile +1 -0
@@ -6,6 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o +obj-$(CONFIG_$(SPL_)DM_PMIC_MAX77663) += max77663.o obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
drivers/power/pmic/max77663.c new file +86 -0
86 lines not on this page · raw message
include/power/max77663.h new file +42 -0
42 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH v6 4/8 power: regulator: max77663: add regulator support
In reply to Svyatoslav RyhelThe driver provides regulator set/get voltage enable/disable functions for MAXIM MAX77663 PMICs.
--- drivers/power/regulator/Kconfig | 9 + drivers/power/regulator/Makefile | 1 + drivers/power/regulator/max77663_regulator.c | 378 +++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 drivers/power/regulator/max77663_regulator.c
drivers/power/regulator/Kconfig +9 -0
@@ -141,6 +141,15 @@ config SPL_REGULATOR_PWM This config enables implementation of driver-model regulator uclass features for PWM regulators in SPL. +config DM_REGULATOR_MAX77663 + bool "Enable Driver Model for REGULATOR MAX77663" + depends on DM_REGULATOR && DM_PMIC_MAX77663 + ---help--- + This config enables implementation of driver-model regulator uclass + features for REGULATOR MAX77663. The driver supports both DC-to-DC + Step-Down (SD) Regulators and Low-Dropout Linear (LDO) Regulators + found in MAX77663 PMIC and implements get/set api for value and enable. + config DM_REGULATOR_MAX77686 bool "Enable Driver Model for REGULATOR MAX77686" depends on DM_REGULATOR && DM_PMIC_MAX77686
drivers/power/regulator/Makefile +1 -0
@@ -10,6 +10,7 @@ obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o obj-$(CONFIG_$(SPL_)REGULATOR_AXP) += axp_regulator.o obj-$(CONFIG_$(SPL_)REGULATOR_AXP_USB_POWER) += axp_usb_power.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o +obj-$(CONFIG_$(SPL_)DM_REGULATOR_MAX77663) += max77663_regulator.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_DM_REGULATOR_NPCM8XX) += npcm8xx_regulator.o obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
drivers/power/regulator/max77663_regulator.c new file +378 -0
378 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH v6 5/8 power: pmic: add the base TPS80031 PMIC support
In reply to Svyatoslav RyhelAdd support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers.
--- doc/device-tree-bindings/pmic/tps80031.txt | 76 +++++++++++++++++++ drivers/power/pmic/Kconfig | 11 +++ drivers/power/pmic/Makefile | 1 + drivers/power/pmic/tps80031.c | 87 ++++++++++++++++++++++ include/power/tps80031.h | 45 +++++++++++ 5 files changed, 220 insertions(+) create mode 100644 doc/device-tree-bindings/pmic/tps80031.txt create mode 100644 drivers/power/pmic/tps80031.c create mode 100644 include/power/tps80031.h
doc/device-tree-bindings/pmic/tps80031.txt new file +76 -0
@@ -0,0 +1,76 @@ +Texas Instruments, TPS80031/TPS80032 PMIC + +This device uses two drivers: +- drivers/power/pmic/tps80031.c (for parent device) +- drivers/power/regulator/tps80031_regulator.c (for child regulators) + +This chapter describes the binding info for the PMIC driver and regulators. + +Required properties for PMIC: +- compatible: "ti,tps80031" or "ti,tps80032" +- reg: 0x48 + +With those two properties, the pmic device can be used for read/write only. +To bind each regulator, the optional regulators subnode should exists. + +Optional subnode: +- name: regulators (subnode list of each device's regulator) + +Regulators subnode contains set on supported regulators. + +Required properties: +- regulator-name: used for regulator uclass platform data '.name', + +List of supported regulator nodes names for tps80031/tps80032: +- smps1, smps2, smps3, smps4, smps5 +- ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldoln, ldousb + +SMPS5 in Linux 3.1.10 is referred as vio, but datasheet clearly names it SMPS5. + +Optional: +- regulator-min-microvolt: minimum allowed Voltage to set +- regulator-max-microvolt: minimum allowed Voltage to set +- regulator-always-on: regulator should be never disabled +- regulator-boot-on: regulator should be enabled by the bootloader + +Example: + +tps80032@48 { + compatible = "ti,tps80032"; + reg = <0x48>; + + regulators { + smps1 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + ... + + smps5 { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + }; + + ... + + ldousb { + regulator-name = "avdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +};
drivers/power/pmic/Kconfig +11 -0
@@ -350,6 +350,17 @@ config DM_PMIC_TPS65910 DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO pmic children. +config DM_PMIC_TPS80031 + bool "Enable driver for Texas Instruments TPS80031/TPS80032 PMIC" + ---help--- + This config enables implementation of driver-model pmic uclass features + for TPS80031/TPS80032 PMICs. The driver implements read/write operations. + This is a Power Management IC with a decent set of peripherals from which + 5 Buck Converters refered as Switched-mode power supply (SMPS), 11 General- + Purpose Low-Dropout Voltage Regulators (LDO), USB OTG Module, Real-Time + Clock (RTC) with Timer and Alarm Wake-Up, Two Digital PWM Outputs and more + with I2C Compatible Interface. PMIC occupies 4 I2C addresses. + config PMIC_STPMIC1 bool "Enable support for STMicroelectronics STPMIC1 PMIC" depends on DM_I2C
drivers/power/pmic/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o +obj-$(CONFIG_$(SPL_)DM_PMIC_TPS80031) += tps80031.o obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
drivers/power/pmic/tps80031.c new file +87 -0
87 lines not on this page · raw message
include/power/tps80031.h new file +45 -0
45 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH v6 6/8 power: regulator: tps80031: add regulator support
In reply to Svyatoslav RyhelThe driver provides regulator set/get voltage enable/disable functions for TI TPS80031/TPS80032 PMICs.
--- drivers/power/regulator/Kconfig | 8 + drivers/power/regulator/Makefile | 1 + drivers/power/regulator/tps80031_regulator.c | 350 +++++++++++++++++++ 3 files changed, 359 insertions(+) create mode 100644 drivers/power/regulator/tps80031_regulator.c
drivers/power/regulator/Kconfig +8 -0
@@ -356,6 +356,14 @@ config DM_REGULATOR_TPS62360 implements the get/set api for value only, as the power line is always on. +config DM_REGULATOR_TPS80031 + bool "Enable driver for TPS80031/TPS80032 PMIC regulators" + depends on DM_PMIC_TPS80031 + ---help--- + This enables implementation of driver-model regulator uclass + features for TPS80031/TPS80032 PMICs. The driver implements + get/set api for: value and enable. + config DM_REGULATOR_STPMIC1 bool "Enable driver for STPMIC1 regulators" depends on DM_REGULATOR && PMIC_STPMIC1
drivers/power/regulator/Makefile +1 -0
@@ -33,6 +33,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o +obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o obj-$(CONFIG_DM_REGULATOR_TPS65941) += tps65941_regulator.o obj-$(CONFIG_DM_REGULATOR_SCMI) += scmi_regulator.o
drivers/power/regulator/tps80031_regulator.c new file +350 -0
350 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH v6 7/8 power: pmic: tps65910: add TPS65911 PMIC support
In reply to Svyatoslav RyhelAdd support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write functions to access pmic registers.
--- doc/device-tree-bindings/pmic/tps65911.txt | 78 ++++++++++++++++++++++ drivers/power/pmic/pmic_tps65910_dm.c | 15 ++++- include/power/tps65910_pmic.h | 44 ++++++++++++ 3 files changed, 134 insertions(+), 3 deletions(-) create mode 100644 doc/device-tree-bindings/pmic/tps65911.txt
doc/device-tree-bindings/pmic/tps65911.txt new file +78 -0
@@ -0,0 +1,78 @@ +Texas Instruments, TPS65911 PMIC + +This device uses two drivers: +- drivers/power/pmic/tps65910.c (for parent device) +- drivers/power/regulator/tps65911_regulator.c (for child regulators) + +This chapter describes the binding info for the PMIC driver and regulators. + +Required properties for PMIC: +- compatible: "ti,tps65911" +- reg: 0x2d + +With those two properties, the pmic device can be used for read/write only. +To bind each regulator, the optional regulators subnode should exists. + +Optional subnode: +- name: regulators (subnode list of each device's regulator) + +Regulators subnode contains set on supported regulators. + +Required properties: +- regulator-name: used for regulator uclass platform data '.name', + +List of supported regulator nodes names for tps65911: +- vdd1, vdd2, vddctrl, vddio +- ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8 + +vddio in datasheet is referred as vio, but for reduction of code and +unification of smps regulators it is named vddio. + +Optional: +- regulator-min-microvolt: minimum allowed Voltage to set +- regulator-max-microvolt: minimum allowed Voltage to set +- regulator-always-on: regulator should be never disabled +- regulator-boot-on: regulator should be enabled by the bootloader + +Example: + +tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + regulators { + vdd1 { + regulator-name = "vdd_1v2_backlight"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ... + + vddio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "vdd_emmc_core"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ... + + ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + }; +};
drivers/power/pmic/pmic_tps65910_dm.c +12 -3
@@ -11,13 +11,19 @@#include <power/regulator.h> #include <power/tps65910_pmic.h> -static const struct pmic_child_info pmic_children_info[] = { +static const struct pmic_child_info tps65910_children_info[] = { { .prefix ="ldo_" , .driver =TPS65910_LDO_DRIVER }, { .prefix ="buck_" , .driver =TPS65910_BUCK_DRIVER }, { .prefix ="boost_" , .driver =TPS65910_BOOST_DRIVER }, { }, }; +static const struct pmic_child_info tps65911_children_info[] = { + { .prefix ="ldo" , .driver =TPS65911_LDO_DRIVER }, + { .prefix ="vdd" , .driver =TPS65911_VDD_DRIVER }, + { }, +}; +static int pmic_tps65910_reg_count (struct udevice *dev) {return TPS65910_NUM_REGS ;
@@ -49,6 +55,8 @@ static int pmic_tps65910_read(struct udevice *dev, uint reg, u8 *buffer,static int pmic_tps65910_bind (struct udevice *dev) { +const struct pmic_child_info *tps6591x_children_info = + (struct pmic_child_info *)dev_get_driver_data (dev);ofnode regulators_node;int children;
@@ -58,7 +66,7 @@ static int pmic_tps65910_bind(struct udevice *dev)return -EINVAL ; } - children =pmic_bind_children (dev, regulators_node, pmic_children_info); + children =pmic_bind_children (dev, regulators_node, tps6591x_children_info);if (!children)debug ("%s has no children (regulators)\n" , dev->name);
@@ -82,7 +90,8 @@ static struct dm_pmic_ops pmic_tps65910_ops = { };static const struct udevice_id pmic_tps65910_match[] = { - { .compatible ="ti,tps65910" }, + { .compatible ="ti,tps65910" , .data = (ulong)&tps65910_children_info }, + { .compatible ="ti,tps65911" , .data = (ulong)&tps65911_children_info }, {/* sentinel */ } };
include/power/tps65910_pmic.h +44 -0
48 lines not on this page · raw message
Signature · 1 line
2.39.2
PATCH v6 8/8 power: regulator: tps65911: add regulator support
In reply to Svyatoslav RyhelThe driver provides regulator set/get voltage enable/disable functions for TI TPS5911 PMIC.
--- drivers/power/regulator/Kconfig | 11 + drivers/power/regulator/Makefile | 1 + drivers/power/regulator/tps65911_regulator.c | 397 +++++++++++++++++++ 3 files changed, 409 insertions(+) create mode 100644 drivers/power/regulator/tps65911_regulator.c
drivers/power/regulator/Kconfig +11 -0
@@ -346,6 +346,17 @@ config DM_REGULATOR_TPS65910 regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements the get/set api for value and enable. +config DM_REGULATOR_TPS65911 + bool "Enable driver for TPS65911 PMIC regulators" + depends on DM_PMIC_TPS65910 + ---help--- + This config enables implementation of driver-model regulator + uclass features for the TPS65911 PMIC. The driver supports Step-Down + DC-DC Converters for Processor Cores (VDD1 and VDD2), Step-Down DC-DC + Converter for I/O Power (VIO), Controller for External FETs (VDDCtrl) + and LDO Voltage Regulators found in TPS65911 PMIC and implements + get/set api for value and enable. + config DM_REGULATOR_TPS62360 bool "Enable driver for TPS6236x Power Regulator" depends on DM_REGULATOR
drivers/power/regulator/Makefile +1 -0
@@ -32,6 +32,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o +obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS65911) += tps65911_regulator.o obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_TPS80031) += tps80031_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
drivers/power/regulator/tps65911_regulator.c new file +397 -0
397 lines not on this page · raw message
Signature · 1 line
2.39.2