ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
Subsystems (2)
PATCH 1/1 ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows following device warning:
'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"'
This is not critical, as KSZ driver by itself assigns default value of tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps' has been specified with the default value of 2000 ps.
--- arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +1 -0
@@ -152,6 +152,7 @@ label = "cpu"; ethernet = <&macb0>; phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; fixed-link { speed = <1000>;
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 5 lines · Lukasz Majewski
Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows following device warning:
'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"'
Quoted 7 lines
This is not critical, as KSZ driver by itself assigns default value of tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps' has been specified with the default value of 2000 ps.
Signed-off-by Lukasz Majewski <[email protected]>
Applied to at91-dt, thanks!
Dear Community,
Quoted 7 lines
Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows following device warning:
'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"'
Quoted 7 lines
This is not critical, as KSZ driver by itself assigns default value of tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps' has been specified with the default value of 2000 ps.
Gentle ping on this patch.
Claudiu, could you pick it as well?
Quoted 11 lines
Signed-off-by Lukasz Majewski <[email protected]>--- arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 1 + 1 file changed, 1 insertion(+)(quoted diff) +0
-0
b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dtsindex99cd6d15998b..b66570080894100644 ---a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts+++b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts@@ -152,6 +152,7 @@ label = "cpu";
arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts line 158
Quoted 6 lines
arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +1
-0ethernet = <&macb0>; phy-mode = "rgmii-txid"; + tx-internal-delay-ps = <2000>; fixed-link { speed = <1000>;
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
claudiu beznea
maintainerHi, Lukasz,
Quoted 12 lines · Lukasz Majewski
Dear Community,
Quoted 10 lines
Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows following device warning:
'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"'
This is not critical, as KSZ driver by itself assigns default value of tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
Quoted 8 lines
Quoted 4 lines
However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps' has been specified with the default value of 2000 ps.
Gentle ping on this patch.
Claudiu, could you pick it as well?
It's already in arm-soc:
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel