Skip to contentSkip to conversation

netlabel: fix shift wrapping bug in netlbl_catmap_setlong()

PATCH New Sasha Levin 1 participant 9 messages Aug 29, 2023

Subsystems (8)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/9 netlabel: fix shift wrapping bug in netlbl_catmap_setlong()

From: Dmitry Mastykin <[email protected]>

[ Upstream commit b403643d154d15176b060b82f7fc605210033edd ]

There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted.

---
 net/netlabel/netlabel_kapi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/netlabel/netlabel_kapi.c +2 -1
index 54c0830039470..27511c90a26f4 100644
@@ -857,7 +857,8 @@ int netlbl_catmap_setlong(struct netlbl_lsm_catmap **catmap,
 
 	offset -= iter->startbit;
 	idx = offset / NETLBL_CATMAP_MAPSIZE;
-	iter->bitmap[idx] |= bitmap << (offset % NETLBL_CATMAP_MAPSIZE);
+	iter->bitmap[idx] |= (NETLBL_CATMAP_MAPTYPE)bitmap
+			     << (offset % NETLBL_CATMAP_MAPSIZE);
 
 	return 0;
 }
Signature · 1 line
2.40.1
author maintainer
#1 lore raw

PATCH 2/9 bnx2x: fix page fault following EEH recovery

From: David Christensen <[email protected]>

[ Upstream commit 7ebe4eda4265642859507d1b3ca330d8c196cfe5 ]

In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference.

This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface.

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +7 -2
index 553f3de939574..9c26c46771f5e 100644
@@ -14317,11 +14317,16 @@ static void bnx2x_io_resume(struct pci_dev *pdev)
 	bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
 							DRV_MSG_SEQ_NUMBER_MASK;
 
-	if (netif_running(dev))
-		bnx2x_nic_load(bp, LOAD_NORMAL);
+	if (netif_running(dev)) {
+		if (bnx2x_nic_load(bp, LOAD_NORMAL)) {
+			netdev_err(bp->dev, "Error during driver initialization, try unloading/reloading the driver\n");
+			goto done;
+		}
+	}
 
 	netif_device_attach(dev);
 
+done:
 	rtnl_unlock();
 }
 
Signature · 1 line
2.40.1
author maintainer
#2 lore raw

PATCH 3/9 smb/client: print "Unknown" instead of bogus link speed value

In reply to Sasha Levin

From: Enzo Matsumiya <[email protected]>

[ Upstream commit 50e63d6db6fd30a6dd9a33c49aa5b0bba36e1a92 ]

The virtio driver for Linux guests will not set a link speed to its paravirtualized NICs. This will be seen as -1 in the ethernet layer, and when some servers (e.g. samba) fetches it, it's converted to an unsigned value (and multiplied by 1000 * 1000), so in client side we end up with:

1) Speed: 4294967295000000 bps

in DebugData.

This patch introduces a helper that returns a speed string (in Mbps or Gbps) if interface speed is valid (>= SPEED_10 and <= SPEED_800000), or "Unknown" otherwise.

The reason to not change the value in iface->speed is because we don't know the real speed of the HW backing the server NIC, so let's keep considering these as the fastest NICs available.

Also print "Capabilities: None" when the interface doesn't support any.

---
 fs/cifs/cifs_debug.c | 47 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)
fs/cifs/cifs_debug.c +46 -1
index e7501533c2ec9..8294e8be16661 100644
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/uaccess.h>
+#include <uapi/linux/ethtool.h>
 #include "cifspdu.h"
 #include "cifsglob.h"
 #include "cifsproto.h"
@@ -144,18 +145,62 @@ cifs_dump_channel(struct seq_file *m, int i, struct cifs_chan *chan)
 		   atomic_read(&server->num_waiters));
 }
 
+static inline const char *smb_speed_to_str(size_t bps)
+{
+	size_t mbps = bps / 1000 / 1000;
+
+	switch (mbps) {
+	case SPEED_10:
+		return "10Mbps";
+	case SPEED_100:
+		return "100Mbps";
+	case SPEED_1000:
+		return "1Gbps";
+	case SPEED_2500:
+		return "2.5Gbps";
+	case SPEED_5000:
+		return "5Gbps";
+	case SPEED_10000:
+		return "10Gbps";
+	case SPEED_14000:
+		return "14Gbps";
+	case SPEED_20000:
+		return "20Gbps";
+	case SPEED_25000:
+		return "25Gbps";
+	case SPEED_40000:
+		return "40Gbps";
+	case SPEED_50000:
+		return "50Gbps";
+	case SPEED_56000:
+		return "56Gbps";
+	case SPEED_100000:
+		return "100Gbps";
+	case SPEED_200000:
+		return "200Gbps";
+	case SPEED_400000:
+		return "400Gbps";
+	case SPEED_800000:
+		return "800Gbps";
+	default:
+		return "Unknown";
+	}
+}
+
 static void
 cifs_dump_iface(struct seq_file *m, struct cifs_server_iface *iface)
 {
 	struct sockaddr_in *ipv4 = (struct sockaddr_in *)&iface->sockaddr;
 	struct sockaddr_in6 *ipv6 = (struct sockaddr_in6 *)&iface->sockaddr;
 
-	seq_printf(m, "\tSpeed: %zu bps\n", iface->speed);
+	seq_printf(m, "\tSpeed: %s\n", smb_speed_to_str(iface->speed));
 	seq_puts(m, "\t\tCapabilities: ");
 	if (iface->rdma_capable)
 		seq_puts(m, "rdma ");
 	if (iface->rss_capable)
 		seq_puts(m, "rss ");
+	if (!iface->rdma_capable && !iface->rss_capable)
+		seq_puts(m, "None");
 	seq_putc(m, '\n');
 	if (iface->sockaddr.ss_family == AF_INET)
 		seq_printf(m, "\t\tIPv4: %pI4\n", &ipv4->sin_addr);
Signature · 1 line
2.40.1
author maintainer
#3 lore raw

PATCH 4/9 sctp: handle invalid error codes without calling BUG()

In reply to Sasha Levin

From: Dan Carpenter <[email protected]>

[ Upstream commit a0067dfcd9418fd3b0632bc59210d120d038a9c6 ]

The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition values but if the call to sctp_ulpevent_make_authkey() fails, it returns -ENOMEM.

This results in calling BUG() inside the sctp_side_effects() function. Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE() instead.

This code predates git.

---
 net/sctp/sm_sideeffect.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/sctp/sm_sideeffect.c +4 -1
index 463c4a58d2c36..970c6a486a9b0 100644
@@ -1251,7 +1251,10 @@ static int sctp_side_effects(enum sctp_event_type event_type,
 	default:
 		pr_err("impossible disposition %d in state %d, event_type %d, event_id %d\n",
 		       status, state, event_type, subtype.chunk);
-		BUG();
+		error = status;
+		if (error >= 0)
+			error = -EINVAL;
+		WARN_ON_ONCE(1);
 		break;
 	}
 
Signature · 1 line
2.40.1
author maintainer
#4 lore raw

PATCH 5/9 cifs: add a warning when the in-flight count goes negative

In reply to Sasha Levin

From: Shyam Prasad N <[email protected]>

[ Upstream commit e4645cc2f1e2d6f268bb8dcfac40997c52432aed ]

We've seen the in-flight count go into negative with some internal stress testing in Microsoft.

Adding a WARN when this happens, in hope of understanding why this happens when it happens.

---
 fs/cifs/smb2ops.c | 1 +
 1 file changed, 1 insertion(+)
fs/cifs/smb2ops.c +1 -0
index 560c4ababfe1a..fe96e2afeea61 100644
@@ -85,6 +85,7 @@ smb2_add_credits(struct TCP_Server_Info *server,
 		*val = 65000; /* Don't get near 64K credits, avoid srv bugs */
 		pr_warn_once("server overflowed SMB3 credits\n");
 	}
+	WARN_ON_ONCE(server->in_flight == 0);
 	server->in_flight--;
 	if (server->in_flight == 0 &&
 	   ((optype & CIFS_OP_MASK) != CIFS_NEG_OP) &&
Signature · 1 line
2.40.1
author maintainer
#5 lore raw

PATCH 6/9 scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity

In reply to Sasha Levin

From: Sagar Biradar <[email protected]>

[ Upstream commit 9dc704dcc09eae7d21b5da0615eb2ed79278f63e ]

Fix the I/O hang that arises because of the MSIx vector not having a mapped online CPU upon receiving completion.

SCSI cmds take the blk_mq route, which is setup during init. Reserved cmds fetch the vector_no from mq_map after init is complete. Before init, they have to use 0 - as per the norm.

---
 drivers/scsi/aacraid/aacraid.h |  1 +
 drivers/scsi/aacraid/commsup.c |  6 +++++-
 drivers/scsi/aacraid/linit.c   | 14 ++++++++++++++
 drivers/scsi/aacraid/src.c     | 25 +++++++++++++++++++++++--
 4 files changed, 43 insertions(+), 3 deletions(-)
drivers/scsi/aacraid/aacraid.h +1 -0
index 3733df77bc65d..4aa7335b66a1f 100644
@@ -1677,6 +1677,7 @@ struct aac_dev
 	u32			handle_pci_error;
 	bool			init_reset;
 	u8			soft_reset_support;
+	u8			use_map_queue;
 };
 
 #define aac_adapter_interrupt(dev) \
drivers/scsi/aacraid/commsup.c +5 -1
index deb32c9f4b3e6..3f062e4013ab6 100644
@@ -223,8 +223,12 @@ int aac_fib_setup(struct aac_dev * dev)
 struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
 {
 	struct fib *fibptr;
+	u32 blk_tag;
+	int i;
 
-	fibptr = &dev->fibs[scsi_cmd_to_rq(scmd)->tag];
+	blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+	i = blk_mq_unique_tag_to_tag(blk_tag);
+	fibptr = &dev->fibs[i];
 	/*
 	 *	Null out fields that depend on being zero at the start of
 	 *	each I/O
drivers/scsi/aacraid/linit.c +14 -0
index 3168915adaa75..c00c214a2b87a 100644
@@ -19,6 +19,7 @@
 
 #include <linux/compat.h>
 #include <linux/blkdev.h>
+#include <linux/blk-mq-pci.h>
 #include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -506,6 +507,15 @@ static int aac_slave_configure(struct scsi_device *sdev)
 	return 0;
 }
 
+static void aac_map_queues(struct Scsi_Host *shost)
+{
+	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+	blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+			      aac->pdev, 0);
+	aac->use_map_queue = true;
+}
+
 /**
  *	aac_change_queue_depth		-	alter queue depths
  *	@sdev:	SCSI device we are considering
@@ -1485,6 +1495,7 @@ static struct scsi_host_template aac_driver_template = {
 	.bios_param			= aac_biosparm,
 	.shost_attrs			= aac_attrs,
 	.slave_configure		= aac_slave_configure,
+	.map_queues			= aac_map_queues,
 	.change_queue_depth		= aac_change_queue_depth,
 	.sdev_attrs			= aac_dev_attrs,
 	.eh_abort_handler		= aac_eh_abort,
@@ -1771,6 +1782,8 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_lun = AAC_MAX_LUN;
 
 	pci_set_drvdata(pdev, shost);
+	shost->nr_hw_queues = aac->max_msix;
+	shost->host_tagset = 1;
 
 	error = scsi_add_host(shost, &pdev->dev);
 	if (error)
@@ -1903,6 +1916,7 @@ static void aac_remove_one(struct pci_dev *pdev)
 	struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
 
 	aac_cancel_rescan_worker(aac);
+	aac->use_map_queue = false;
 	scsi_remove_host(shost);
 
 	__aac_shutdown(aac);
drivers/scsi/aacraid/src.c +23 -2
index 11ef58204e96f..61949f3741886 100644
@@ -493,6 +493,10 @@ static int aac_src_deliver_message(struct fib *fib)
 #endif
 
 	u16 vector_no;
+	struct scsi_cmnd *scmd;
+	u32 blk_tag;
+	struct Scsi_Host *shost = dev->scsi_host_ptr;
+	struct blk_mq_queue_map *qmap;
 
 	atomic_inc(&q->numpending);
 
@@ -505,8 +509,25 @@ static int aac_src_deliver_message(struct fib *fib)
 		if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)
 			&& dev->sa_firmware)
 			vector_no = aac_get_vector(dev);
-		else
-			vector_no = fib->vector_no;
+		else {
+			if (!fib->vector_no || !fib->callback_data) {
+				if (shost && dev->use_map_queue) {
+					qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
+					vector_no = qmap->mq_map[raw_smp_processor_id()];
+				}
+				/*
+				 *	We hardcode the vector_no for
+				 *	reserved commands as a valid shost is
+				 *	absent during the init
+				 */
+				else
+					vector_no = 0;
+			} else {
+				scmd = (struct scsi_cmnd *)fib->callback_data;
+				blk_tag = blk_mq_unique_tag(scsi_cmd_to_rq(scmd));
+				vector_no = blk_mq_unique_tag_to_hwq(blk_tag);
+			}
+		}
 
 		if (native_hba) {
 			if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) {
Signature · 1 line
2.40.1
author maintainer
#6 lore raw

PATCH 7/9 scsi: storvsc: Always set no_report_opcodes

In reply to Sasha Levin

From: Michael Kelley <[email protected]>

[ Upstream commit 31d16e712bdcaee769de4780f72ff8d6cd3f0589 ]

Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI command, so scsi_report_opcode() always fails, resulting in messages like this:

hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001

The recently added support for command duration limits calls scsi_report_opcode() four times as each device comes online, which significantly increases the number of messages logged in a system with many disks.

Fix the problem by always marking Hyper-V synthetic SCSI devices as not supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI command is not issued and no messages are logged.

---
 drivers/scsi/storvsc_drv.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/storvsc_drv.c +2 -0
index c9b1500c2ab87..98db7bcbe2af1 100644
@@ -1626,6 +1626,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice)
 {
 	blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
 
+	/* storvsc devices don't support MAINTENANCE_IN SCSI cmd */
+	sdevice->no_report_opcodes = 1;
 	sdevice->no_write_same = 1;
 
 	/*
Signature · 1 line
2.40.1
author maintainer
#7 lore raw

PATCH 8/9 scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path

In reply to Sasha Levin

From: Justin Tee <[email protected]>

[ Upstream commit 9cefd6e7e0a77b0fbca5c793f6fb6821b0962775 ]

The kernel test robot reported sparse warnings regarding incorrect type assignment for __be16 variables in bsg loopback path.

Change the flagged lines to use the be16_to_cpu() and cpu_to_be16() macros appropriately.

---
 drivers/scsi/lpfc/lpfc_bsg.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/lpfc/lpfc_bsg.c +4 -4
index fdf08cb572071..ed827f198cb68 100644
@@ -911,7 +911,7 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			struct lpfc_iocbq *piocbq)
 {
 	uint32_t evt_req_id = 0;
-	uint32_t cmd;
+	u16 cmd;
 	struct lpfc_dmabuf *dmabuf = NULL;
 	struct lpfc_bsg_event *evt;
 	struct event_data *evt_dat = NULL;
@@ -936,7 +936,7 @@ lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 
 	ct_req = (struct lpfc_sli_ct_request *)bdeBuf1->virt;
 	evt_req_id = ct_req->FsType;
-	cmd = ct_req->CommandResponse.bits.CmdRsp;
+	cmd = be16_to_cpu(ct_req->CommandResponse.bits.CmdRsp);
 
 	spin_lock_irqsave(&phba->ct_ev_lock, flags);
 	list_for_each_entry(evt, &phba->ct_ev_waiters, node) {
@@ -3243,8 +3243,8 @@ lpfc_bsg_diag_loopback_run(struct bsg_job *job)
 			ctreq->RevisionId.bits.InId = 0;
 			ctreq->FsType = SLI_CT_ELX_LOOPBACK;
 			ctreq->FsSubType = 0;
-			ctreq->CommandResponse.bits.CmdRsp = ELX_LOOPBACK_DATA;
-			ctreq->CommandResponse.bits.Size   = size;
+			ctreq->CommandResponse.bits.CmdRsp = cpu_to_be16(ELX_LOOPBACK_DATA);
+			ctreq->CommandResponse.bits.Size   = cpu_to_be16(size);
 			segment_offset = ELX_LOOPBACK_HEADER_SZ;
 		} else
 			segment_offset = 0;
Signature · 1 line
2.40.1
author maintainer
#8 lore raw

PATCH 9/9 ALSA: seq: oss: Fix racy open/close of MIDI devices

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ]

Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races.

---
 sound/core/seq/oss/seq_oss_midi.c | 35 +++++++++++++++++++------------
 1 file changed, 22 insertions(+), 13 deletions(-)
sound/core/seq/oss/seq_oss_midi.c +22 -13
index 07efb38f58ac1..f2940b29595f0 100644
@@ -37,6 +37,7 @@ struct seq_oss_midi {
 	struct snd_midi_event *coder;	/* MIDI event coder */
 	struct seq_oss_devinfo *devinfo;	/* assigned OSSseq device */
 	snd_use_lock_t use_lock;
+	struct mutex open_mutex;
 };
 
 
@@ -172,6 +173,7 @@ snd_seq_oss_midi_check_new_port(struct snd_seq_port_info *pinfo)
 	mdev->flags = pinfo->capability;
 	mdev->opened = 0;
 	snd_use_lock_init(&mdev->use_lock);
+	mutex_init(&mdev->open_mutex);
 
 	/* copy and truncate the name of synth device */
 	strscpy(mdev->name, pinfo->name, sizeof(mdev->name));
@@ -322,15 +324,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode)
 	int perm;
 	struct seq_oss_midi *mdev;
 	struct snd_seq_port_subscribe subs;
+	int err;
 
 	mdev = get_mididev(dp, dev);
 	if (!mdev)
 		return -ENODEV;
 
+	mutex_lock(&mdev->open_mutex);
 	/* already used? */
 	if (mdev->opened && mdev->devinfo != dp) {
-		snd_use_lock_free(&mdev->use_lock);
-		return -EBUSY;
+		err = -EBUSY;
+		goto unlock;
 	}
 
 	perm = 0;
@@ -340,14 +344,14 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode)
 		perm |= PERM_READ;
 	perm &= mdev->flags;
 	if (perm == 0) {
-		snd_use_lock_free(&mdev->use_lock);
-		return -ENXIO;
+		err = -ENXIO;
+		goto unlock;
 	}
 
 	/* already opened? */
 	if ((mdev->opened & perm) == perm) {
-		snd_use_lock_free(&mdev->use_lock);
-		return 0;
+		err = 0;
+		goto unlock;
 	}
 
 	perm &= ~mdev->opened;
@@ -372,13 +376,17 @@ snd_seq_oss_midi_open(struct seq_oss_devinfo *dp, int dev, int fmode)
 	}
 
 	if (! mdev->opened) {
-		snd_use_lock_free(&mdev->use_lock);
-		return -ENXIO;
+		err = -ENXIO;
+		goto unlock;
 	}
 
 	mdev->devinfo = dp;
+	err = 0;
+
+ unlock:
+	mutex_unlock(&mdev->open_mutex);
 	snd_use_lock_free(&mdev->use_lock);
-	return 0;
+	return err;
 }
 
 /*
@@ -393,10 +401,9 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev)
 	mdev = get_mididev(dp, dev);
 	if (!mdev)
 		return -ENODEV;
-	if (! mdev->opened || mdev->devinfo != dp) {
-		snd_use_lock_free(&mdev->use_lock);
-		return 0;
-	}
+	mutex_lock(&mdev->open_mutex);
+	if (!mdev->opened || mdev->devinfo != dp)
+		goto unlock;
 
 	memset(&subs, 0, sizeof(subs));
 	if (mdev->opened & PERM_WRITE) {
@@ -415,6 +422,8 @@ snd_seq_oss_midi_close(struct seq_oss_devinfo *dp, int dev)
 	mdev->opened = 0;
 	mdev->devinfo = NULL;
 
+ unlock:
+	mutex_unlock(&mdev->open_mutex);
 	snd_use_lock_free(&mdev->use_lock);
 	return 0;
 }
Signature · 1 line
2.40.1