fdt: common API to populate kaslr seed
Subsystems (2)
PATCH v2 1/4 fdt: common API to populate kaslr seed
From: Dhananjay Phadke <[email protected]>
fdt_fixup_kaslr_seed() will update given FDT with random seed value. Source for random seed can be TPM or RNG driver in u-boot or sec firmware (ARM).
--- arch/arm/cpu/armv8/sec_firmware.c | 39 +++++++++++-------------------- common/fdt_support.c | 19 +++++++++++++++ drivers/core/ofnode.c | 17 ++++++++++++++ include/dm/ofnode.h | 12 ++++++++++ include/fdt_support.h | 9 +++++++ 5 files changed, 71 insertions(+), 25 deletions(-)
arch/arm/cpu/armv8/sec_firmware.c +14 -25
@@ -411,46 +411,35 @@ int sec_firmware_init(const void *sec_firmware_img,/* * fdt_fix_kaslr - Add kalsr-seed node in Device tree * @fdt: Device tree -* @eret: 0 in case of error, 1 for success +* @eret: 0 for success */ int fdt_fixup_kaslr (void *fdt) { -int nodeoffset; -int err, ret =0 ; -u8 rand[8 ]; +int ret =0 ;#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT ) +u8 rand[8 ]; +ofnode root; +/* Check if random seed generation is supported */ if (sec_firmware_support_hwrng () == false) {printf ("WARNING: SEC firmware not running, no kaslr-seed\n" ); -return 0 ; +return -EOPNOTSUPP ; } - err =sec_firmware_get_random (rand,8 ); -if (err <0 ) { + ret =sec_firmware_get_random (rand,8 ); +if (ret <0 ) {printf ("WARNING: No random number to set kaslr-seed\n" ); -return 0 ; +return ret; } - err =fdt_check_header (fdt); -if (err <0 ) { -printf ("fdt_chosen: %s\n" ,fdt_strerror (err)); -return 0 ; + ret =root_ofnode_from_fdt (fdt, &root); +if (ret <0 ) { +printf ("WARNING: Unable to get root ofnode\n" ); +return ret; } -/* find or create "/chosen" node. */ - nodeoffset =fdt_find_or_add_subnode (fdt,0 ,"chosen" ); -if (nodeoffset <0 ) -return 0 ; - - err =fdt_setprop (fdt, nodeoffset,"kaslr-seed" , rand, -sizeof (rand)); -if (err <0 ) { -printf ("WARNING: can't set kaslr-seed %s.\n" , -fdt_strerror (err)); -return 0 ; - } - ret =1 ; + ret =fdt_fixup_kaslr_seed (root, rand,sizeof (rand));#endif return ret;
common/fdt_support.c +19 -0
@@ -631,6 +631,25 @@ void fdt_fixup_ethernet(void *fdt) } } +int fdt_fixup_kaslr_seed (ofnode node,const u8 *seed,int len) +{ +ofnode chosen; +int ret; + +/* find or create "/chosen" node. */ + ret =ofnode_add_subnode (node,"chosen" , &chosen); +if (ret && ret != -EEXIST ) +return -ENOENT ; + + ret =ofnode_write_prop (chosen,"kaslr-seed" , seed, len, true); +if (ret) { +printf ("WARNING: can't set kaslr-seed\n" ); +return ret; + } + +return 0 ; +} +int fdt_record_loadable (void *blob,u32 index,const char *name,uintptr_t load_addr,u32 size,uintptr_t entry_point,const char *type,const char *os,const char *arch)
drivers/core/ofnode.c +17 -0
@@ -870,6 +870,23 @@ ofnode oftree_path(oftree tree, const char *path) } } +int root_ofnode_from_fdt (void *fdt,ofnode *root_node) +{ +oftree tree; +/* If OFNODE_MULTI_TREE is not set, and if fdt is not the control FDT, +* oftree_from_fdt() will return NULL +*/ + tree =oftree_from_fdt (fdt); + +if (!oftree_valid (tree)) { +printf ("Cannot create oftree\n" ); +return -EINVAL ; + } + *root_node =oftree_root (tree); + +return 0 ; +} +const void *ofnode_read_chosen_prop (const char *propname,int *sizep) {ofnode chosen_node;
include/dm/ofnode.h +12 -0
@@ -901,6 +901,18 @@ ofnode oftree_path(oftree tree, const char *path);*/ ofnode oftree_root (oftree tree); +/** +* root_ofnode_from_fdt() - Gets the root ofnode given an FDT blob. +* Note, this will fail if OFNODE_MULTI_TREE +* is not set. +* +* @fdt: Device tree to use +* @root_node : Root ofnode +* +* Return: 0 if OK, -ve on error +*/ +int root_ofnode_from_fdt (void *fdt,ofnode *root_node); +/** * ofnode_read_chosen_prop() - get the value of a chosen property *
include/fdt_support.h +9 -0
@@ -11,6 +11,7 @@ !defined(USE_HOSTCC)#include <asm/u-boot.h> +#include <dm/ofnode.h> #include <linux/libfdt.h> #include <abuf.h>
@@ -121,6 +122,14 @@ static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],#endif void fdt_fixup_ethernet (void *fdt); + +/* +* fdt_fixup_kaslr_seed - Add kaslr-seed node in Device tree +* @node: ofnode +* @eret: 0 for success +*/ +int fdt_fixup_kaslr_seed (ofnode node,const u8 *seed,int len); +int fdt_find_and_setprop (void *fdt,const char *node,const char *prop,const void *val,int len,int create);void fdt_fixup_qe_firmware (void *fdt);
Signature · 1 line
2.40.0
PATCH v2 1/4 fdt: common API to populate kaslr seed
From: Dhananjay Phadke <[email protected]>
fdt_fixup_kaslr_seed() will update given ofnode with random seed value. Source for random seed can be TPM or RNG driver in u-boot or sec firmware (ARM).
--- arch/arm/cpu/armv8/sec_firmware.c | 39 +++++++++++-------------------- common/fdt_support.c | 19 +++++++++++++++ drivers/core/ofnode.c | 17 ++++++++++++++ include/dm/ofnode.h | 12 ++++++++++ include/fdt_support.h | 9 +++++++ 5 files changed, 71 insertions(+), 25 deletions(-)
arch/arm/cpu/armv8/sec_firmware.c +14 -25
@@ -411,46 +411,35 @@ int sec_firmware_init(const void *sec_firmware_img,/* * fdt_fix_kaslr - Add kalsr-seed node in Device tree * @fdt: Device tree -* @eret: 0 in case of error, 1 for success +* @eret: 0 for success */ int fdt_fixup_kaslr (void *fdt) { -int nodeoffset; -int err, ret =0 ; -u8 rand[8 ]; +int ret =0 ;#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT ) +u8 rand[8 ]; +ofnode root; +/* Check if random seed generation is supported */ if (sec_firmware_support_hwrng () == false) {printf ("WARNING: SEC firmware not running, no kaslr-seed\n" ); -return 0 ; +return -EOPNOTSUPP ; } - err =sec_firmware_get_random (rand,8 ); -if (err <0 ) { + ret =sec_firmware_get_random (rand,8 ); +if (ret <0 ) {printf ("WARNING: No random number to set kaslr-seed\n" ); -return 0 ; +return ret; } - err =fdt_check_header (fdt); -if (err <0 ) { -printf ("fdt_chosen: %s\n" ,fdt_strerror (err)); -return 0 ; + ret =root_ofnode_from_fdt (fdt, &root); +if (ret <0 ) { +printf ("WARNING: Unable to get root ofnode\n" ); +return ret; } -/* find or create "/chosen" node. */ - nodeoffset =fdt_find_or_add_subnode (fdt,0 ,"chosen" ); -if (nodeoffset <0 ) -return 0 ; - - err =fdt_setprop (fdt, nodeoffset,"kaslr-seed" , rand, -sizeof (rand)); -if (err <0 ) { -printf ("WARNING: can't set kaslr-seed %s.\n" , -fdt_strerror (err)); -return 0 ; - } - ret =1 ; + ret =fdt_fixup_kaslr_seed (root, rand,sizeof (rand));#endif return ret;
common/fdt_support.c +19 -0
@@ -631,6 +631,25 @@ void fdt_fixup_ethernet(void *fdt) } } +int fdt_fixup_kaslr_seed (ofnode node,const u8 *seed,int len) +{ +ofnode chosen; +int ret; + +/* find or create "/chosen" node. */ + ret =ofnode_add_subnode (node,"chosen" , &chosen); +if (ret && ret != -EEXIST ) +return -ENOENT ; + + ret =ofnode_write_prop (chosen,"kaslr-seed" , seed, len, true); +if (ret) { +printf ("WARNING: can't set kaslr-seed\n" ); +return ret; + } + +return 0 ; +} +int fdt_record_loadable (void *blob,u32 index,const char *name,uintptr_t load_addr,u32 size,uintptr_t entry_point,const char *type,const char *os,const char *arch)
drivers/core/ofnode.c +17 -0
@@ -870,6 +870,23 @@ ofnode oftree_path(oftree tree, const char *path) } } +int root_ofnode_from_fdt (void *fdt,ofnode *root_node) +{ +oftree tree; +/* If OFNODE_MULTI_TREE is not set, and if fdt is not the control FDT, +* oftree_from_fdt() will return NULL +*/ + tree =oftree_from_fdt (fdt); + +if (!oftree_valid (tree)) { +printf ("Cannot create oftree\n" ); +return -EINVAL ; + } + *root_node =oftree_root (tree); + +return 0 ; +} +const void *ofnode_read_chosen_prop (const char *propname,int *sizep) {ofnode chosen_node;
include/dm/ofnode.h +12 -0
@@ -901,6 +901,18 @@ ofnode oftree_path(oftree tree, const char *path);*/ ofnode oftree_root (oftree tree); +/** +* root_ofnode_from_fdt() - Gets the root ofnode given an FDT blob. +* Note, this will fail if OFNODE_MULTI_TREE +* is not set. +* +* @fdt: Device tree to use +* @root_node : Root ofnode +* +* Return: 0 if OK, -ve on error +*/ +int root_ofnode_from_fdt (void *fdt,ofnode *root_node); +/** * ofnode_read_chosen_prop() - get the value of a chosen property *
include/fdt_support.h +9 -0
@@ -11,6 +11,7 @@ !defined(USE_HOSTCC)#include <asm/u-boot.h> +#include <dm/ofnode.h> #include <linux/libfdt.h> #include <abuf.h>
@@ -121,6 +122,14 @@ static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],#endif void fdt_fixup_ethernet (void *fdt); + +/* +* fdt_fixup_kaslr_seed - Add kaslr-seed node in Device tree +* @node: ofnode +* @eret: 0 for success +*/ +int fdt_fixup_kaslr_seed (ofnode node,const u8 *seed,int len); +int fdt_find_and_setprop (void *fdt,const char *node,const char *prop,const void *val,int len,int create);void fdt_fixup_qe_firmware (void *fdt);
Signature · 1 line
2.40.0
PATCH v2 2/4 fdt: kaslr seed from tpm entropy
In reply to [email protected]From: Dhananjay Phadke <[email protected]>
Add support for KASLR seed from TPM device. Invokes tpm_get_random() API to read 8-bytes of random bytes for KASLR.
--- boot/image-fdt.c | 15 +++++++++++++++ common/fdt_support.c | 30 ++++++++++++++++++++++++++++++ include/fdt_support.h | 8 ++++++++ lib/Kconfig | 9 +++++++++ 4 files changed, 62 insertions(+)
boot/image-fdt.c +15 -0
@@ -624,6 +624,21 @@ int image_setup_libfdt(struct bootm_headers *images, void *blob, goto err; } +if (IS_ENABLED (CONFIG_KASLR_TPM_SEED )) { +ofnode root; + + ret =root_ofnode_from_fdt (blob, &root); +if (ret) { +printf ("ERROR: Unable to get root ofnode\n" ); + goto err; + } + ret =fdt_tpm_kaslr_seed (root); +if (ret) { +printf ("ERROR: fdt fixup KASLR failed: %d\n" , ret); + goto err; + } + } + fdt_ret =optee_copy_fdt_nodes (blob);if (fdt_ret) { printf("ERROR: transfer of optee nodes to new fdt failed: %s\n",
common/fdt_support.c +30 -0
@@ -13,6 +13,9 @@#include <mapmem.h> #include <net.h> #include <stdio_dev.h> +#include <tpm_api.h> +#include <dm/device.h> +#include <dm/uclass.h> #include <dm/ofnode.h> #include <linux/ctype.h> #include <linux/types.h>
@@ -650,6 +653,33 @@ int fdt_fixup_kaslr_seed(ofnode node, const u8 *seed, int len)return 0 ; } +int fdt_tpm_kaslr_seed (ofnode node) +{ +u8 rand[8 ] = {0 }; +struct udevice *dev; +int ret; + + ret =uclass_first_device_err (UCLASS_TPM , &dev); +if (ret) { +printf ("ERROR: Failed to find TPM device\n" ); +return ret; + } + + ret =tpm_get_random (dev, rand,sizeof (rand)); +if (ret) { +printf ("ERROR: TPM GetRandom failed, ret=%d\n" , ret); +return ret; + } + + ret =fdt_fixup_kaslr_seed (node, rand,sizeof (rand)); +if (ret) { +printf ("ERROR: failed to add kaslr-seed to fdt\n" ); +return ret; + } + +return 0 ; +} +int fdt_record_loadable (void *blob,u32 index,const char *name,uintptr_t load_addr,u32 size,uintptr_t entry_point,const char *type,const char *os,const char *arch)
include/fdt_support.h +8 -0
@@ -130,6 +130,14 @@ void fdt_fixup_ethernet(void *fdt);*/ int fdt_fixup_kaslr_seed (ofnode node,const u8 *seed,int len); +/* +* fdt_add_tpm_kaslr_seed - Add kalsr-seed node in Device tree with random +* bytes from TPM device +* @node: ofnode +* @eret: 0 for success +*/ +int fdt_tpm_kaslr_seed (ofnode node); +int fdt_find_and_setprop (void *fdt,const char *node,const char *prop,const void *val,int len,int create);void fdt_fixup_qe_firmware (void *fdt);
lib/Kconfig +9 -0
@@ -465,6 +465,15 @@ config VPL_TPM for the low-level TPM interface, but only one TPM is supported at a time by the TPM library. +config KASLR_TPM_SEED + bool "Use TPM for KASLR random seed" + depends on TPM_V1 || TPM_V2 + help + This enables support for using TPMs as entropy source for KASLR seed + populated in kernel's device tree. Both TPMv1 and TPMv2 are supported + for the low-level TPM interface, but only one TPM is supported at + a time by the library. + endmenu menu "Android Verified Boot"
Signature · 1 line
2.40.0
v2 cover Populate kaslr seed with TPM
In reply to [email protected]From: Sean Edmond <[email protected]>
This patch series creates a common API (fdt_fixup_kaslr_seed()) for populating the kaslr seed in the DTB. Existing users (kaslrseed, and ARMv8 sec firmware) have been updated to use this common API.
New functionality has been introduced to populate the kaslr using the TPM interface. This can be enabled with CONFIG_KASLR_TPM_SEED.
changes in v2:
- fdt_fixup_kaslr_seed() uses the ofnode API
- Add root_ofnode_from_fdt() to get the root node from an FDT and perform error checking on the oftree
- add comments to exported functions
- Add error checking in image_setup_libfdt() for return from fdt_tpm_kaslr_seed()
- uclass_get_device() -> uclass_first_device_err()
- Change default config for OFNODE_MULTI_TREE (y if !OF_LIVE)
Dhananjay Phadke (2):
fdt: common API to populate kaslr seed
fdt: kaslr seed from tpm entropy
Sean Edmond (2):
cmd: kaslrseed: Use common API to fixup FDT
dm: core: Modify default for OFNODE_MULTI_TREE
arch/arm/cpu/armv8/sec_firmware.c | 39 +++++++++--------------- boot/image-fdt.c | 15 ++++++++++ cmd/kaslrseed.c | 22 +++++--------- common/fdt_support.c | 49 +++++++++++++++++++++++++++++++ drivers/core/Kconfig | 2 +- drivers/core/ofnode.c | 17 +++++++++++ include/dm/ofnode.h | 12 ++++++++ include/fdt_support.h | 17 +++++++++++ lib/Kconfig | 9 ++++++ 9 files changed, 142 insertions(+), 40 deletions(-)
Signature · 1 line
2.40.0
PATCH v2 2/4 fdt: kaslr seed from tpm entropy
In reply to [email protected]From: Dhananjay Phadke <[email protected]>
Add support for KASLR seed from TPM device. Invokes tpm_get_random() API to read 8-bytes of random bytes for KASLR.
--- boot/image-fdt.c | 15 +++++++++++++++ common/fdt_support.c | 30 ++++++++++++++++++++++++++++++ include/fdt_support.h | 8 ++++++++ lib/Kconfig | 9 +++++++++ 4 files changed, 62 insertions(+)
boot/image-fdt.c +15 -0
@@ -624,6 +624,21 @@ int image_setup_libfdt(struct bootm_headers *images, void *blob, goto err; } +if (IS_ENABLED (CONFIG_KASLR_TPM_SEED )) { +ofnode root; + + ret =root_ofnode_from_fdt (blob, &root); +if (ret) { +printf ("ERROR: Unable to get root ofnode\n" ); + goto err; + } + ret =fdt_tpm_kaslr_seed (root); +if (ret) { +printf ("ERROR: fdt fixup KASLR failed: %d\n" , ret); + goto err; + } + } + fdt_ret =optee_copy_fdt_nodes (blob);if (fdt_ret) { printf("ERROR: transfer of optee nodes to new fdt failed: %s\n",
common/fdt_support.c +30 -0
@@ -13,6 +13,9 @@#include <mapmem.h> #include <net.h> #include <stdio_dev.h> +#include <tpm_api.h> +#include <dm/device.h> +#include <dm/uclass.h> #include <dm/ofnode.h> #include <linux/ctype.h> #include <linux/types.h>
@@ -650,6 +653,33 @@ int fdt_fixup_kaslr_seed(ofnode node, const u8 *seed, int len)return 0 ; } +int fdt_tpm_kaslr_seed (ofnode node) +{ +u8 rand[8 ] = {0 }; +struct udevice *dev; +int ret; + + ret =uclass_first_device_err (UCLASS_TPM , &dev); +if (ret) { +printf ("ERROR: Failed to find TPM device\n" ); +return ret; + } + + ret =tpm_get_random (dev, rand,sizeof (rand)); +if (ret) { +printf ("ERROR: TPM GetRandom failed, ret=%d\n" , ret); +return ret; + } + + ret =fdt_fixup_kaslr_seed (node, rand,sizeof (rand)); +if (ret) { +printf ("ERROR: failed to add kaslr-seed to fdt\n" ); +return ret; + } + +return 0 ; +} +int fdt_record_loadable (void *blob,u32 index,const char *name,uintptr_t load_addr,u32 size,uintptr_t entry_point,const char *type,const char *os,const char *arch)
include/fdt_support.h +8 -0
@@ -130,6 +130,14 @@ void fdt_fixup_ethernet(void *fdt);*/ int fdt_fixup_kaslr_seed (ofnode node,const u8 *seed,int len); +/* +* fdt_add_tpm_kaslr_seed - Add kalsr-seed node in Device tree with random +* bytes from TPM device +* @node: ofnode +* @eret: 0 for success +*/ +int fdt_tpm_kaslr_seed (ofnode node); +int fdt_find_and_setprop (void *fdt,const char *node,const char *prop,const void *val,int len,int create);void fdt_fixup_qe_firmware (void *fdt);
lib/Kconfig +9 -0
@@ -465,6 +465,15 @@ config VPL_TPM for the low-level TPM interface, but only one TPM is supported at a time by the TPM library. +config KASLR_TPM_SEED + bool "Use TPM for KASLR random seed" + depends on TPM_V1 || TPM_V2 + help + This enables support for using TPMs as entropy source for KASLR seed + populated in kernel's device tree. Both TPMv1 and TPMv2 are supported + for the low-level TPM interface, but only one TPM is supported at + a time by the library. + endmenu menu "Android Verified Boot"
Signature · 1 line
2.40.0
PATCH v2 3/4 cmd: kaslrseed: Use common API to fixup FDT
In reply to [email protected]From: Sean Edmond <[email protected]>
Use the newly introduced common API fdt_fixup_kaslr_seed() in the kaslrseed command.
--- cmd/kaslrseed.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)
cmd/kaslrseed.c +8 -14
@@ -19,7 +19,7 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *constsize_t n =0x8 ;struct udevice *dev;u64 *buf; -int nodeoffset; +ofnode root;int ret =CMD_RET_SUCCESS ;if (uclass_get_device (UCLASS_RNG ,0 , &dev) || !dev) {
@@ -45,21 +45,15 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *constreturn CMD_RET_FAILURE ; } - ret =fdt_check_header (working_fdt); -if (ret <0 ) { -printf ("fdt_chosen: %s\n" ,fdt_strerror (ret)); -return CMD_RET_FAILURE ; - } - - nodeoffset =fdt_find_or_add_subnode (working_fdt,0 ,"chosen" ); -if (nodeoffset <0 ) { -printf ("Reading chosen node failed\n" ); -return CMD_RET_FAILURE ; + ret =root_ofnode_from_fdt (working_fdt, &root); +if (ret) { +printf ("ERROR: Unable to get root ofnode\n" ); + goto CMD_RET_FAILURE; } - ret =fdt_setprop (working_fdt, nodeoffset,"kaslr-seed" , buf,sizeof (buf)); -if (ret <0 ) { -printf ("Unable to set kaslr-seed on chosen node: %s\n" ,fdt_strerror (ret)); + ret =fdt_fixup_kaslr_seed (root, buf,sizeof (buf)); +if (ret) { +printf ("ERROR: failed to add kaslr-seed to fdt\n" );return CMD_RET_FAILURE ; }
Signature · 1 line
2.40.0
PATCH v2 3/4 cmd: kaslrseed: Use common API to fixup FDT
In reply to [email protected]From: Sean Edmond <[email protected]>
Use the newly introduced common API fdt_fixup_kaslr_seed() in the kaslrseed command.
--- cmd/kaslrseed.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)
cmd/kaslrseed.c +8 -14
@@ -19,7 +19,7 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *constsize_t n =0x8 ;struct udevice *dev;u64 *buf; -int nodeoffset; +ofnode root;int ret =CMD_RET_SUCCESS ;if (uclass_get_device (UCLASS_RNG ,0 , &dev) || !dev) {
@@ -45,21 +45,15 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *constreturn CMD_RET_FAILURE ; } - ret =fdt_check_header (working_fdt); -if (ret <0 ) { -printf ("fdt_chosen: %s\n" ,fdt_strerror (ret)); -return CMD_RET_FAILURE ; - } - - nodeoffset =fdt_find_or_add_subnode (working_fdt,0 ,"chosen" ); -if (nodeoffset <0 ) { -printf ("Reading chosen node failed\n" ); -return CMD_RET_FAILURE ; + ret =root_ofnode_from_fdt (working_fdt, &root); +if (ret) { +printf ("ERROR: Unable to get root ofnode\n" ); + goto CMD_RET_FAILURE; } - ret =fdt_setprop (working_fdt, nodeoffset,"kaslr-seed" , buf,sizeof (buf)); -if (ret <0 ) { -printf ("Unable to set kaslr-seed on chosen node: %s\n" ,fdt_strerror (ret)); + ret =fdt_fixup_kaslr_seed (root, buf,sizeof (buf)); +if (ret) { +printf ("ERROR: failed to add kaslr-seed to fdt\n" );return CMD_RET_FAILURE ; }
Signature · 1 line
2.40.0
PATCH v2 4/4 dm: core: Modify default for OFNODE_MULTI_TREE
In reply to [email protected]From: Sean Edmond <[email protected]>
There is a preference to use the "ofnode" API for FDT fixups moving forward. The FDT fixup will usually be for the kernel FDT. To fixup the kernel FDT with the ofnode API, it's required to set the OFNODE_MULTI_TREE option.
To ensure exisiting users on kasls fixup are not impacted, Let's modify the default value for OFNODE_MULTI_TREE to ensure it's always set if !OF_LIVE. This will cause a 1007 byte increase in the code size.
--- drivers/core/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/core/Kconfig +1 -1
@@ -424,7 +424,7 @@ config DM_DEV_READ_INLINE config OFNODE_MULTI_TREE bool "Allow the ofnode interface to access any tree" - default y if EVENT && !DM_DEV_READ_INLINE && !DM_INLINE_OFNODE + default y if !OF_LIVE help Normally U-Boot makes use of its control FDT, the one used to bind devices and provide options. In some cases, U-Boot must also process
Signature · 1 line
2.40.0
PATCH v2 4/4 dm: core: Modify default for OFNODE_MULTI_TREE
In reply to [email protected]From: Sean Edmond <[email protected]>
There is a preference to use the "ofnode" API for FDT fixups moving forward. The FDT fixup will usually be for the kernel FDT. To fixup the kernel FDT with the ofnode API, it's required to set the OFNODE_MULTI_TREE option.
To ensure existing users of kaslr fdt fixup are not impacted, Let's modify the default value for OFNODE_MULTI_TREE to ensure it's always set if !OF_LIVE. This will cause a 1007 byte increase in the code size.
--- drivers/core/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/core/Kconfig +1 -1
@@ -424,7 +424,7 @@ config DM_DEV_READ_INLINE config OFNODE_MULTI_TREE bool "Allow the ofnode interface to access any tree" - default y if EVENT && !DM_DEV_READ_INLINE && !DM_INLINE_OFNODE + default y if !OF_LIVE help Normally U-Boot makes use of its control FDT, the one used to bind devices and provide options. In some cases, U-Boot must also process
Signature · 1 line
2.40.0