Skip to contentSkip to conversation

CXL, ACPI, APEI, EINJ: Update EINJ for CXL 1.1 error types

PATCH Superseded Ben Cheatham 2 participants 7 messages Sep 5, 2023 – Sep 6, 2023

Subsystems (3)

v3 of 15 Superseded Latest is v15 →

lore
Share & tools
lore
#0 lore raw

v3 cover CXL, ACPI, APEI, EINJ: Update EINJ for CXL 1.1 error types

v3 Changes:
- Add sysfs files for finding valid CXL 1.1 downstream port MMIO addresses, along with validation of said addresses
- Update EINJ documentation to include relevant information for injecting CXL error types
- Dropped Yazen's from tag

This patch is a follow up to the discussion at [1], and builds on Tony's CXL error patch at [2].

The new CXL error types will use the Memory Address field in the SET_ERROR_TYPE_WITH_ADDRESS structure in order to target a CXL 1.1 compliant memory-mapped downstream port. The value of the memory address will be in the port's MMIO range, and it will not represent physical (normal or persistent) memory.

In v2 [3], the user supplied the MMIO address for the downstream port, but per Dan Williams' suggestion [3], the addresses are predetermined and the user only picks the error type to inject and the downstream port to inject into. In order to inject an error, the user write the error type to the error_type file under the einj debugfs directory, then writes any integer into one of the files under the cxl directory.

[1]:

[2]:

[3]:

Ben Cheatham (3):
CXL, PCIE: Add cxl_rcrb_addr file to dport_dev ACPI, APEI, EINJ: Add CXL 1.1 EINJ error type support ACPI, APEI, EINJ: Update EINJ documentation

 Documentation/ABI/testing/sysfs-bus-cxl       |  8 +++
 .../firmware-guide/acpi/apei/einj.rst         | 26 ++++++++--
 drivers/acpi/apei/einj.c                      | 26 +++++++++-
 drivers/cxl/acpi.c                            |  2 +
 drivers/cxl/core/port.c                       | 50 +++++++++++++++++++
 drivers/cxl/cxl.h                             |  3 ++
 include/linux/cxl.h                           | 18 +++++++
 7 files changed, 128 insertions(+), 5 deletions(-)
 create mode 100644 include/linux/cxl.h
Signature · 1 line
2.34.1
#1 lore raw

PATCH v3 1/3 CXL, PCIE: Add cxl_rcrb_addr file to dport_dev

Add cxl_rcrb_addr to the dport_dev (normally represented by a pcie device) for CXL RCH root ports. The file will print the RCRB base MMIO address of the root port when read and will be used by users looking to inject CXL EINJ error types for RCH hosts.

---
 Documentation/ABI/testing/sysfs-bus-cxl |  8 ++++++
 drivers/cxl/acpi.c                      |  2 ++
 drivers/cxl/core/port.c                 | 33 +++++++++++++++++++++++++
 drivers/cxl/cxl.h                       |  2 ++
 4 files changed, 45 insertions(+)
Documentation/ABI/testing/sysfs-bus-cxl +8 -0
index 087f762ebfd5..a7d169235543 100644
@@ -177,6 +177,14 @@ Description:
 		integer reflects the hardware port unique-id used in the
 		hardware decoder target list.
 
+What:		/sys/bus/cxl/devices/portX/dportY/cxl_rcrb_addr
+Date:		August, 2023
+KernelVersion:	v6.6
+Contact:	[email protected]
+Description:
+		(RO) The 'cxl_rcrb_addr' device file gives the MMIO base address
+		of the RCRB of the corresponding CXL 1.1 downstream port. Only
+		present for CXL 1.1 dports.
 
 What:		/sys/bus/cxl/devices/decoderX.Y
 Date:		June, 2021
drivers/cxl/acpi.c +2 -0
index d1c559879dcc..3e2ca946bf47 100644
@@ -676,6 +676,8 @@ static int cxl_acpi_probe(struct platform_device *pdev)
 	if (IS_ERR(root_port))
 		return PTR_ERR(root_port);
 
+	set_cxl_root(root_port);
+
 	rc = bus_for_each_dev(adev->dev.bus, NULL, root_port,
 			      add_host_bridge_dport);
 	if (rc < 0)
drivers/cxl/core/port.c +33 -0
index 724be8448eb4..b69fd1c1d5d6 100644
@@ -875,6 +875,14 @@ struct cxl_port *find_cxl_root(struct cxl_port *port)
 }
 EXPORT_SYMBOL_NS_GPL(find_cxl_root, CXL);
 
+static struct cxl_port *cxl_root;
+
+void set_cxl_root(struct cxl_port *root_port)
+{
+	cxl_root = root_port;
+}
+EXPORT_SYMBOL_NS_GPL(set_cxl_root, CXL);
+
 static struct cxl_dport *find_dport(struct cxl_port *port, int id)
 {
 	struct cxl_dport *dport;
@@ -930,11 +938,30 @@ static void cond_cxl_root_unlock(struct cxl_port *port)
 		device_unlock(&port->dev);
 }
 
+static ssize_t cxl_rcrb_addr_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct cxl_dport *dport;
+
+	if (!cxl_root)
+		return -ENODEV;
+
+	dport = cxl_find_dport_by_dev(cxl_root, dev);
+	if (!dport)
+		return -ENODEV;
+
+	return sysfs_emit(buf, "0x%llx\n", dport->rcrb.base);
+}
+DEVICE_ATTR_RO(cxl_rcrb_addr);
+
 static void cxl_dport_remove(void *data)
 {
 	struct cxl_dport *dport = data;
 	struct cxl_port *port = dport->port;
 
+	if (dport->rch)
+		device_remove_file(dport->dport_dev, &dev_attr_cxl_rcrb_addr);
+
 	xa_erase(&port->dports, (unsigned long) dport->dport_dev);
 	put_device(dport->dport_dev);
 }
@@ -1021,6 +1048,12 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
 	if (rc)
 		return ERR_PTR(rc);
 
+	if (dport->rch && dport->rcrb.base != CXL_RESOURCE_NONE) {
+		rc = device_create_file(dport_dev, &dev_attr_cxl_rcrb_addr);
+		if (rc)
+			return ERR_PTR(rc);
+	}
+
 	return dport;
 }
 
drivers/cxl/cxl.h +2 -0
index 76d92561af29..4d5bce4bae7e 100644
@@ -690,6 +690,8 @@ struct cxl_port *devm_cxl_add_port(struct device *host,
 				   resource_size_t component_reg_phys,
 				   struct cxl_dport *parent_dport);
 struct cxl_port *find_cxl_root(struct cxl_port *port);
+void set_cxl_root(struct cxl_port *root_port);
+
 int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd);
 void cxl_bus_rescan(void);
 void cxl_bus_drain(void);
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH v3 1/3] CXL, PCIE: Add cxl_rcrb_addr file to dport_dev

kernel test robot noticed the following build warnings:

Hi Ben,

kernel test robot noticed the following build warnings:

[auto build test WARNING on rafael-pm/linux-next]
[also build test WARNING on linus/master v6.5 next-20230905] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Ben-Cheatham/CXL-PCIE-Add-cxl_rcrb_addr-file-to-dport_dev/20230906-025405
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
patch link:    https://lore.kernel.org/r/20230905184406.135851-2-Benjamin.Cheatham%40amd.com
patch subject: [PATCH v3 1/3] CXL, PCIE: Add cxl_rcrb_addr file to dport_dev
config: parisc-allyesconfig (https://download.01.org/0day-ci/archive/20230906/[email protected]/config)
compiler: hppa-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230906/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

drivers/cxl/core/port.c: In function 'cxl_rcrb_addr_show':

>> drivers/cxl/core/port.c:953:38: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
     953 |         return sysfs_emit(buf, "0x%llx\n", dport->rcrb.base);
         |                                   ~~~^     ~~~~~~~~~~~~~~~~
         |                                      |                |
         |                                      |                resource_size_t {aka unsigned int}
         |                                      long long unsigned int
         |                                   %x

vim +953 drivers/cxl/core/port.c

940
941 static ssize_t cxl_rcrb_addr_show(struct device *dev,
942 struct device_attribute *attr, char *buf)
943 {
944 struct cxl_dport *dport;
945
946 if (!cxl_root)
947 return -ENODEV;
948
949 dport = cxl_find_dport_by_dev(cxl_root, dev);
950 if (!dport)
951 return -ENODEV;
952

 > 953		return sysfs_emit(buf, "0x%llx\n", dport->rcrb.base);

954 }
955 DEVICE_ATTR_RO(cxl_rcrb_addr);
956

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#3 lore raw

PATCH v3 2/3 ACPI, APEI, EINJ: Add CXL 1.1 EINJ error type support

In reply to Ben Cheatham

Add support for CXL EINJ error types for CXL 1.1 hosts added in ACPI v6.5. Because these error types target memory-mapped CXL 1.1 compliant downstream ports and not physical (normal/persistent) memory, these error types are not currently allowed through the memory range validation done by the EINJ driver.

The MMIO address of a CXL 1.1 downstream port can be found in the cxl_rcrb_addr file in the corresponding dport directory under /sys/bus/cxl/devices/portX. CXL 1.1 error types follow the same procedure as a memory error type, but with param1 set to the downstream port MMIO address.

Example usage:

$ cd /sys/kernel/debug/apei/einj
$ cat available_error_type
    0x00000008      Memory Correctable
    0x00000010      Memory Uncorrectable non-fatal
    0x00000020      Memory Uncorrectable fatal
    0x00000040      PCI Express Correctable
    0x00000080      PCI Express Uncorrectable non-fatal
    0x00000100      PCI Express Uncorrectable fatal
    0x00008000      CXL.mem Protocol Correctable
    0x00020000      CXL.mem Protocol Uncorrectable fatal
$ echo 0x8000 > error_type
$ echo 0xfffffffffffff000 > param2
$ echo 0x3 > flags
$ cat /sys/bus/cxl/devices/portX/dportY/cxl_rcrb_addr
0xb2f00000
$ echo 0xb2f00000 > param1
$ echo 1 > error_inject
---
 drivers/acpi/apei/einj.c | 26 +++++++++++++++++++++++++-
 drivers/cxl/core/port.c  | 17 +++++++++++++++++
 drivers/cxl/cxl.h        |  1 +
 include/linux/cxl.h      | 18 ++++++++++++++++++
 4 files changed, 61 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/cxl.h
drivers/acpi/apei/einj.c +25 -1
index 013eb621dc92..0783ddd3ab4d 100644
@@ -21,6 +21,7 @@
 #include <linux/nmi.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
+#include <linux/cxl.h>
 #include <asm/unaligned.h>
 
 #include "apei-internal.h"
@@ -36,6 +37,7 @@
 #define MEM_ERROR_MASK		(ACPI_EINJ_MEMORY_CORRECTABLE | \
 				ACPI_EINJ_MEMORY_UNCORRECTABLE | \
 				ACPI_EINJ_MEMORY_FATAL)
+#define CXL_ERROR_MASK		GENMASK(17, 12)
 
 /*
  * ACPI version 5 provides a SET_ERROR_TYPE_WITH_ADDRESS action.
@@ -512,6 +514,24 @@ static int __einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
 	return rc;
 }
 
+static int is_valid_cxl_addr(u64 addr)
+{
+	struct cxl_dport *dport;
+
+	if (IS_REACHABLE(CONFIG_CXL_ACPI)) {
+		dport = cxl_find_rch_dport_by_rcrb((resource_size_t) addr);
+
+		if (!IS_ERR_OR_NULL(dport))
+			return 1;
+	} else {
+		pr_err("CONFIG_CXL_ACPI is not reachable.\n");
+		return 0;
+	}
+
+	pr_info("Could not find dport with rcrb 0x%llx\n", addr);
+	return 0;
+}
+
 /* Inject the specified hardware error */
 static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
 			     u64 param3, u64 param4)
@@ -537,8 +557,11 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
 	if (type & ACPI5_VENDOR_BIT) {
 		if (vendor_flags != SETWA_FLAGS_MEM)
 			goto inject;
-	} else if (!(type & MEM_ERROR_MASK) && !(flags & SETWA_FLAGS_MEM))
+	} else if (!(type & MEM_ERROR_MASK) && !(flags & SETWA_FLAGS_MEM)) {
 		goto inject;
+	} else if (type & CXL_ERROR_MASK && is_valid_cxl_addr(param1)) {
+		goto inject;
+	}
 
 	/*
 	 * Disallow crazy address masks that give BIOS leeway to pick
@@ -807,3 +830,4 @@ module_exit(einj_exit);
 MODULE_AUTHOR("Huang Ying");
 MODULE_DESCRIPTION("APEI Error INJection support");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(CXL);
drivers/cxl/core/port.c +17 -0
index b69fd1c1d5d6..3961f099a775 100644
@@ -1122,6 +1122,23 @@ struct cxl_dport *devm_cxl_add_rch_dport(struct cxl_port *port,
 }
 EXPORT_SYMBOL_NS_GPL(devm_cxl_add_rch_dport, CXL);
 
+struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
+{
+	struct cxl_dport *dport;
+	unsigned long index;
+
+	if (!cxl_root)
+		return ERR_PTR(-ENODEV);
+
+	xa_for_each(&cxl_root->dports, index, dport)
+		if ((dport->rch && dport->rcrb.base != CXL_RESOURCE_NONE)
+		    && dport->rcrb.base == rcrb_base)
+			return dport;
+
+	return NULL;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_find_rch_dport_by_rcrb, CXL);
+
 static int add_ep(struct cxl_ep *new)
 {
 	struct cxl_port *port = new->dport->port;
drivers/cxl/cxl.h +1 -0
index 4d5bce4bae7e..3e6779dbcd23 100644
@@ -8,6 +8,7 @@
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/log2.h>
+#include <linux/cxl.h>
 #include <linux/io.h>
 
 /**
include/linux/cxl.h new file +18 -0
new file mode 100644
index 000000000000..09889581d9f1
@@ -0,0 +1,18 @@
+#ifndef _LINUX_CXL_H
+#define _LINUX_CXL_H
+
+#include <linux/xarray.h>
+#include <linux/errno.h>
+
+struct cxl_dport;
+
+#if IS_ENABLED(CONFIG_CXL_ACPI)
+struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base);
+#else
+struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
+{
+	return NULL;
+}
+#endif
+
+#endif
Signature · 1 line
2.34.1
#4 lore raw

Re: [PATCH v3 2/3] ACPI, APEI, EINJ: Add CXL 1.1 EINJ error type support

kernel test robot noticed the following build warnings:

Hi Ben,

kernel test robot noticed the following build warnings:

[auto build test WARNING on rafael-pm/linux-next]
[also build test WARNING on linus/master v6.5 next-20230905] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Ben-Cheatham/CXL-PCIE-Add-cxl_rcrb_addr-file-to-dport_dev/20230906-025405
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
patch link:    https://lore.kernel.org/r/20230905184406.135851-3-Benjamin.Cheatham%40amd.com
patch subject: [PATCH v3 2/3] ACPI, APEI, EINJ: Add CXL 1.1 EINJ error type support
config: alpha-allyesconfig (https://download.01.org/0day-ci/archive/20230906/[email protected]/config)
compiler: alpha-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230906/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

In file included from drivers/cxl/cxl.h:11,
from drivers/cxl/cxlmem.h:9, from drivers/cxl/core/port.c:11:

>> include/linux/cxl.h:12:19: warning: no previous prototype for 'cxl_find_rch_dport_by_rcrb' [-Wmissing-prototypes]

12 | struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/cxl/core/port.c:1125:19: error: redefinition of 'cxl_find_rch_dport_by_rcrb'
1125 | struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/cxl.h:12:19: note: previous definition of 'cxl_find_rch_dport_by_rcrb' with type 'struct cxl_dport *(resource_size_t)' {aka 'struct cxl_dport *(long long unsigned int)'}
12 | struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
--
In file included from drivers/cxl/cxl.h:11,
from drivers/cxl/cxlmem.h:9,
from drivers/cxl/core/pmem.c:6:

>> include/linux/cxl.h:12:19: warning: no previous prototype for 'cxl_find_rch_dport_by_rcrb' [-Wmissing-prototypes]

12 | struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~

vim +/cxl_find_rch_dport_by_rcrb +12 include/linux/cxl.h

     8	
     9	#if IS_ENABLED(CONFIG_CXL_ACPI)
    10	struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base);
    11	#else
  > 12	struct cxl_dport *cxl_find_rch_dport_by_rcrb(resource_size_t rcrb_base)
    13	{
    14		return NULL;
    15	}
    16	#endif
    17	
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#5 lore raw

Re: [PATCH v3 2/3] ACPI, APEI, EINJ: Add CXL 1.1 EINJ error type support

In reply to Ben Cheatham
kernel test robot noticed the following build errors:

Hi Ben,

kernel test robot noticed the following build errors:

[auto build test ERROR on rafael-pm/linux-next]
[also build test ERROR on linus/master v6.5 next-20230905] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Ben-Cheatham/CXL-PCIE-Add-cxl_rcrb_addr-file-to-dport_dev/20230906-025405
base:   https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
patch link:    https://lore.kernel.org/r/20230905184406.135851-3-Benjamin.Cheatham%40amd.com
patch subject: [PATCH v3 2/3] ACPI, APEI, EINJ: Add CXL 1.1 EINJ error type support
config: alpha-allmodconfig (https://download.01.org/0day-ci/archive/20230906/[email protected]/config)
compiler: alpha-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230906/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

alpha-linux-ld: drivers/cxl/security.o: in function `cxl_find_rch_dport_by_rcrb':

>> (.text+0x8d0): multiple definition of `cxl_find_rch_dport_by_rcrb'; drivers/cxl/pmem.o:(.text+0x1090): first defined here
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#6 lore raw

PATCH v3 3/3 ACPI, APEI, EINJ: Update EINJ documentation

In reply to Ben Cheatham

Update EINJ documentation to include CXL errors in available_error_types table and usage of the types.

Also fix a formatting error in the param4 file description that caused the description to be on the same line as the bullet point.

---
 .../firmware-guide/acpi/apei/einj.rst         | 26 ++++++++++++++++---
 1 file changed, 22 insertions(+), 4 deletions(-)
Documentation/firmware-guide/acpi/apei/einj.rst +22 -4
index d6b61d22f525..20ae49ec4eac 100644
@@ -32,6 +32,10 @@ configuration::
   CONFIG_ACPI_APEI
   CONFIG_ACPI_APEI_EINJ
 
+To use CXL error types ``CONFIG_CXL_ACPI`` needs to be set. If
+``CONFIG_CXL_ACPI`` is set to the "m" then ``CONFIG_ACPI_APEI_EINJ``
+also must be set to "m" or "n".
+
 The EINJ user interface is in <debugfs mount point>/apei/einj.
 
 The following files belong to it:
@@ -40,9 +44,9 @@ The following files belong to it:
 
   This file shows which error types are supported:
 
-  ================  ===================================
+  ================  =========================================
   Error Type Value	Error Description
-  ================  ===================================
+  ================  =========================================
   0x00000001        Processor Correctable
   0x00000002        Processor Uncorrectable non-fatal
   0x00000004        Processor Uncorrectable fatal
@@ -55,7 +59,13 @@ The following files belong to it:
   0x00000200        Platform Correctable
   0x00000400        Platform Uncorrectable non-fatal
   0x00000800        Platform Uncorrectable fatal
-  ================  ===================================
+  0x00001000        CXL.cache Protocol Correctable
+  0x00002000        CXL.cache Protocol Uncorrectable non-fatal
+  0x00004000        CXL.cache Protocol Uncorrectable fatal
+  0x00008000        CXL.mem Protocol Correctable
+  0x00010000        CXL.mem Protocol Uncorrectable non-fatal
+  0x00020000        CXL.mem Protocol Uncorrectable fatal
+  ================  =========================================
 
   The format of the file contents are as above, except present are only
   the available error types.
@@ -106,6 +116,7 @@ The following files belong to it:
   Used when the 0x1 bit is set in "flags" to specify the APIC id
 
 - param4
+
   Used when the 0x4 bit is set in "flags" to specify target PCIe device
 
 - notrigger
@@ -159,6 +170,13 @@ and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
 documentation for details (and expect changes to this API if vendors
 creativity in using this feature expands beyond our expectations).
 
+CXL error types are supported from ACPI 6.5 onwards. To use these error
+types you need the MMIO address of a CXL 1.1 downstream port. You can
+find the address of dportY in /sys/bus/cxl/devices/portX/dportY/cxl_rcrb_addr
+(it's possible that the dport is under the CXL root, in that case the
+path would be /sys/us/cxl/devices/rootX/dportY/cxl_rcrb_addr).
+From there, write the address to param1 and continue as you would for a
+memory error type.
 
 An error injection example::
 
@@ -201,4 +219,4 @@ The following sequence can be used:
   7) Read from the virtual address. This will trigger the error
 
 For more information about EINJ, please refer to ACPI specification
-version 4.0, section 17.5 and ACPI 5.0, section 18.6.
+version 4.0, section 17.5 and ACPI 6.5, section 18.6.
Signature · 1 line
2.34.1