dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatible
Subsystems (3)
PATCH v2 1/2 dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatible
Add TI DSS OLDI-IO control registers compatible. This is a region of 5 32bit registers found in the TI AM65 CTRL_MMR0 register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the DSS display controller node.
[0] https://www.ti.com/lit/pdf/spruid7
---
Changes for v2:
- Use device specific compatible string
Documentation/devicetree/bindings/mfd/syscon.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/mfd/syscon.yaml +1 -0
@@ -69,6 +69,7 @@ properties: - rockchip,rk3588-qos - rockchip,rv1126-qos - starfive,jh7100-sysmain + - ti,am654-dss-oldi-io-ctrl - const: syscon
Signature · 7 lines
2.39.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 2/2 arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node
This matches the binding for this register region which fixes a couple DTS check warnings.
While here trim the leading 0s from the "reg" definition.
--- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +2 -2
@@ -498,8 +498,8 @@ serdes_mux: mux-controller { }; dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { - compatible = "syscon"; - reg = <0x000041e0 0x14>; + compatible = "ti,am654-dss-oldi-io-ctrl", "syscon"; + reg = <0x41e0 0x14>; }; ehrpwm_tbclk: clock-controller@4140 {
Signature · 7 lines
2.39.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v2 2/2] arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node
Quoted 6 lines · Andrew Davis
This matches the binding for this register region which fixes a couple DTS check warnings.
While here trim the leading 0s from the "reg" definition.
Signed-off-by Andrew Davis <[email protected]>
For both the patches, 1/2 and 2/2,
Quoted 19 lines
--- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/ti/k3-am65-main.dtsi +2
-2@@ -498,8 +498,8 @@ serdes_mux: mux-controller { }; dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { - compatible = "syscon"; - reg = <0x000041e0 0x14>; + compatible = "ti,am654-dss-oldi-io-ctrl", "syscon"; + reg = <0x41e0 0x14>; }; ehrpwm_tbclk: clock-controller@4140 {
Lee Jones
maintainerRe: [PATCH v2 2/2] arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node
Quoted 11 lines · Aradhya Bhatia
Quoted 6 lines · Andrew Davis
This matches the binding for this register region which fixes a couple DTS check warnings.
While here trim the leading 0s from the "reg" definition.
Signed-off-by Andrew Davis <[email protected]>For both the patches, 1/2 and 2/2,
If you want to Ack both patches, you have to Ack both patches.
Quoted 21 lines
Reviewed-by Aradhya Bhatia <[email protected]>Quoted 19 lines
--- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)arch/arm64/boot/dts/ti/k3-am65-main.dtsi +2
-2@@ -498,8 +498,8 @@ serdes_mux: mux-controller { }; dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { - compatible = "syscon"; - reg = <0x000041e0 0x14>; + compatible = "ti,am654-dss-oldi-io-ctrl", "syscon"; + reg = <0x41e0 0x14>; }; ehrpwm_tbclk: clock-controller@4140 {
Signature · 1 line
Lee Jones [李琼斯]
Quoted 10 lines · Andrew Davis
Add TI DSS OLDI-IO control registers compatible. This is a region of 5 32bit registers found in the TI AM65
CTRL_MMR0register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the DSS display controller node.[0] https://www.ti.com/lit/pdf/spruid7
Signed-off-by Andrew Davis <[email protected]>---
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 8 lines · Andrew Davis
Add TI DSS OLDI-IO control registers compatible. This is a region of 5 32bit registers found in the TI AM65
CTRL_MMR0register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the DSS display controller node.[0] https://www.ti.com/lit/pdf/spruid7
Signed-off-by Andrew Davis <[email protected]>
Quoted 20 lines
---
Changes for v2:
- Use device specific compatible stringDocumentation/devicetree/bindings/mfd/syscon.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/mfd/syscon.yaml +1
-0@@ -69,6 +69,7 @@ properties: - rockchip,rk3588-qos - rockchip,rv1126-qos - starfive,jh7100-sysmain + - ti,am654-dss-oldi-io-ctrl - const: syscon
Re: (subset) [PATCH v2 1/2] dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatible
In reply to Andrew DavisQuoted 8 lines · Andrew Davis
Add TI DSS OLDI-IO control registers compatible. This is a region of 5 32bit registers found in the TI AM65
CTRL_MMR0register space[0]. They are used to control the characteristics of the OLDI DATA/CLK IO as needed by the DSS display controller node.[0] https://www.ti.com/lit/pdf/spruid7
[...]
Applied, thanks!
[1/2] dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatible
commit: 9cfffe6a730feea95e7bc827537f5b0a2931171c
--
Lee Jones [李琼斯]