Small fixes and cleanups (ov2740 and ccs)
Subsystems (8)
Sakari Ailus
maintainerv6 cover Small fixes and cleanups (ov2740 and ccs)
Hi folks,
This small set contains fixes and cleanups, mainly for the ccs and ov2740 drivers. I wrote these while working on the metadata set, but these could and should be merged earlier.
since v5:
- Send right patches (was v3 + an additional patch)!
since v4:
- Fix CCS driver active state patch --- media entity was initialised too late.
- Rebase on Laurent's ov2740 cleanups.
- Add a new patch for MIPI CSI-2 long packet types.
since v3:
- Don't print frame descriptor entry flags as strings but in a numeric form.
- Add a WARN_ON() for string truncation in printing the frame descriptor.
- Use 0 flag in printing hexadecimal values in frame descriptor instead of specifying precision.
- Add curly braces around a loop (11th patch).
since v2:
- Wrap init_cfg callback long line.
- Remove "pad_" from variable names in ccs_init_cfg.
- Fix media_entity_pads_init() error handling bug (was introduced in the last patch).
- Print frame descriptor in less verbose way.
since v1:
- Add a comment on ov2740 active state patch on serialising sensor access.
- Improved commit message of ov2740 patch enabling runtime PM earlier.
- Added patches for printing and zeroing frame descriptor, (debug) printing of frame descriptor, switching ccs to init_cfg and sub-device state and checking pad flag validity.
Sakari Ailus (13):
media: Documentation: Align numbered list, make it a proper ReST
media: ccs: Fix driver quirk struct documentation
media: ccs: Correctly initialise try compose rectangle
media: ccs: Correct error handling in ccs_register_subdev
media: ccs: Switch to init_cfg
media: ccs: Use sub-device active state
media: ov2740: Enable runtime PM before registering the async subdev
media: ov2740: Use sub-device active state
media: ov2740: Return -EPROBE_DEFER if no endpoint is found
media: v4l: subdev: Clear frame descriptor before get_frame_desc
media: v4l: subdev: Print debug information on frame descriptor
media: mc: Check pad flag validity
media: Add MIPI CSI-2 generic long packet type definition
.../userspace-api/media/v4l/dev-subdev.rst | 49 ++- drivers/media/i2c/ccs/ccs-core.c | 320 +++++++----------- drivers/media/i2c/ccs/ccs-quirk.h | 4 +- drivers/media/i2c/ccs/ccs.h | 4 +- drivers/media/i2c/ds90ub913.c | 2 - drivers/media/i2c/ds90ub953.c | 2 - drivers/media/i2c/ds90ub960.c | 2 - drivers/media/i2c/ov2740.c | 125 +++---- drivers/media/mc/mc-entity.c | 15 +- drivers/media/platform/nxp/imx-mipi-csis.c | 2 - drivers/media/v4l2-core/v4l2-subdev.c | 38 +++ include/media/mipi-csi2.h | 1 + 12 files changed, 256 insertions(+), 308 deletions(-)
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 1/13 media: Documentation: Align numbered list, make it a proper ReST
Align lines for numbered list so that Sphinx produces an uniform output for all list entries. Also indent paragraphs of such list entries for consistency.
Also use ReST numbered list syntax for the entries.
--- .../userspace-api/media/v4l/dev-subdev.rst | 49 +++++++++---------- 1 file changed, 24 insertions(+), 25 deletions(-)
Documentation/userspace-api/media/v4l/dev-subdev.rst +24 -25
@@ -579,20 +579,19 @@ is started. There are three steps in configuring the streams: -1) Set up links. Connect the pads between sub-devices using the :ref:`Media -Controller API <media_controller>` +1. Set up links. Connect the pads between sub-devices using the + :ref:`Media Controller API <media_controller>` -2) Streams. Streams are declared and their routing is configured by -setting the routing table for the sub-device using -:ref:`VIDIOC_SUBDEV_S_ROUTING <VIDIOC_SUBDEV_G_ROUTING>` ioctl. Note that -setting the routing table will reset formats and selections in the -sub-device to default values. +2. Streams. Streams are declared and their routing is configured by setting the + routing table for the sub-device using :ref:`VIDIOC_SUBDEV_S_ROUTING + <VIDIOC_SUBDEV_G_ROUTING>` ioctl. Note that setting the routing table will + reset formats and selections in the sub-device to default values. -3) Configure formats and selections. Formats and selections of each stream -are configured separately as documented for plain sub-devices in -:ref:`format-propagation`. The stream ID is set to the same stream ID -associated with either sink or source pads of routes configured using the -:ref:`VIDIOC_SUBDEV_S_ROUTING <VIDIOC_SUBDEV_G_ROUTING>` ioctl. +3. Configure formats and selections. Formats and selections of each stream are + configured separately as documented for plain sub-devices in + :ref:`format-propagation`. The stream ID is set to the same stream ID + associated with either sink or source pads of routes configured using the + :ref:`VIDIOC_SUBDEV_S_ROUTING <VIDIOC_SUBDEV_G_ROUTING>` ioctl. Multiplexed streams setup example ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -618,11 +617,11 @@ modeled as V4L2 devices, exposed to userspace via /dev/videoX nodes. To configure this pipeline, the userspace must take the following steps: -1) Set up media links between entities: connect the sensors to the bridge, -bridge to the receiver, and the receiver to the DMA engines. This step does -not differ from normal non-multiplexed media controller setup. +1. Set up media links between entities: connect the sensors to the bridge, + bridge to the receiver, and the receiver to the DMA engines. This step does + not differ from normal non-multiplexed media controller setup. -2) Configure routing +2. Configure routing .. flat-table:: Bridge routing table :header-rows: 1
@@ -656,14 +655,14 @@ not differ from normal non-multiplexed media controller setup. - V4L2_SUBDEV_ROUTE_FL_ACTIVE - Pixel data stream from Sensor B -3) Configure formats and selections +3. Configure formats and selections -After configuring routing, the next step is configuring the formats and -selections for the streams. This is similar to performing this step without -streams, with just one exception: the ``stream`` field needs to be assigned -to the value of the stream ID. + After configuring routing, the next step is configuring the formats and + selections for the streams. This is similar to performing this step without + streams, with just one exception: the ``stream`` field needs to be assigned + to the value of the stream ID. -A common way to accomplish this is to start from the sensors and propagate the -configurations along the stream towards the receiver, -using :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls to configure each -stream endpoint in each sub-device. + A common way to accomplish this is to start from the sensors and propagate + the configurations along the stream towards the receiver, using + :ref:`VIDIOC_SUBDEV_S_FMT <VIDIOC_SUBDEV_G_FMT>` ioctls to configure each + stream endpoint in each sub-device.
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 2/13 media: ccs: Fix driver quirk struct documentation
In reply to Sakari AilusFix documentation for struct ccs_quirk, a device specific struct for managing deviations from the standard. The flags field was drifted away from where it should have been.
--- drivers/media/i2c/ccs/ccs-quirk.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/media/i2c/ccs/ccs-quirk.h +1 -3
@@ -32,12 +32,10 @@ struct ccs_sensor;* @reg: Pointer to the register to access * @value: Register value, set by the caller on write, or * by the quirk on read -* -* @flags: Quirk flags -* * @return: 0 on success, -ENOIOCTLCMD if no register * access may be done by the caller (default read * value is zero), else negative error code on error +* @flags: Quirk flags */ struct ccs_quirk {int (*limits)(struct ccs_sensor *sensor);
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 3/13 media: ccs: Correctly initialise try compose rectangle
In reply to Sakari AilusInitialise the try sink compose rectangle size to the sink compose rectangle for binner and scaler sub-devices. This was missed due to the faulty condition that lead to the compose rectangles to be initialised for the pixel array sub-device where it is not relevant.
--- drivers/media/i2c/ccs/ccs-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/ccs/ccs-core.c +1 -1
@@ -3097,7 +3097,7 @@ static int ccs_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) try_fmt->code = sensor->internal_csi_format->code; try_fmt->field =V4L2_FIELD_NONE ; -if (ssd != sensor->pixel_array) +if (ssd == sensor->pixel_array)continue ; try_comp =v4l2_subdev_get_try_compose (sd, fh->state, i);
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 4/13 media: ccs: Correct error handling in ccs_register_subdev
In reply to Sakari Ailusccs_register_subdev() did not clean up the media entity in error case, do that now. Also switch to goto based error handling.
--- drivers/media/i2c/ccs/ccs-core.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/media/i2c/ccs/ccs-core.c +10 -3
@@ -2968,7 +2968,7 @@ static int ccs_register_subdev(struct ccs_sensor *sensor, rval =v4l2_device_register_subdev (sensor->src->sd.v4l2_dev, &ssd->sd);if (rval) {dev_err (&client->dev,"v4l2_device_register_subdev failed\n" ); -return rval; + goto out_media_entity_cleanup; } rval = media_create_pad_link(&ssd->sd.entity, source_pad,
@@ -2976,11 +2976,18 @@ static int ccs_register_subdev(struct ccs_sensor *sensor, link_flags);if (rval) {dev_err (&client->dev,"media_create_pad_link failed\n" ); -v4l2_device_unregister_subdev (&ssd->sd); -return rval; + goto out_v4l2_device_unregister_subdev; }return 0 ; + +out_v4l2_device_unregister_subdev: +v4l2_device_unregister_subdev (&ssd->sd); + +out_media_entity_cleanup: +media_entity_cleanup (&ssd->sd.entity); + +return rval; }static void ccs_unregistered (struct v4l2_subdev *subdev)
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 5/13 media: ccs: Switch to init_cfg
In reply to Sakari AilusUse init_cfg() instead of manually setting up defaults in file handle open.
--- drivers/media/i2c/ccs/ccs-core.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)
drivers/media/i2c/ccs/ccs-core.c +6 -11
@@ -2945,7 +2945,6 @@ static int ccs_identify_module(struct ccs_sensor *sensor) }static const struct v4l2_subdev_ops ccs_ops; -static const struct v4l2_subdev_internal_ops ccs_internal_ops;static const struct media_entity_operations ccs_entity_ops; static int ccs_register_subdev(struct ccs_sensor *sensor,
@@ -3076,13 +3075,13 @@ static void ccs_create_subdev(struct ccs_sensor *sensor,if (ssd == sensor->src)return ; - ssd->sd.internal_ops = &ccs_internal_ops; ssd->sd.owner =THIS_MODULE ; ssd->sd.dev = &client->dev;v4l2_set_subdevdata (&ssd->sd, client); } -static int ccs_open (struct v4l2_subdev *sd,struct v4l2_subdev_fh *fh) +static int ccs_init_cfg (struct v4l2_subdev *sd, +struct v4l2_subdev_state *sd_state) {struct ccs_subdev *ssd =to_ccs_subdev (sd);struct ccs_sensor *sensor = ssd->sensor;
@@ -3092,9 +3091,9 @@ static int ccs_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)for (i =0 ; i < ssd->npads; i++) {struct v4l2_mbus_framefmt *try_fmt = -v4l2_subdev_get_try_format (sd, fh->state, i); +v4l2_subdev_get_try_format (sd, sd_state, i);struct v4l2_rect *try_crop = -v4l2_subdev_get_try_crop (sd, fh->state, i); +v4l2_subdev_get_try_crop (sd, sd_state, i);struct v4l2_rect *try_comp;ccs_get_native_size (ssd, try_crop);
@@ -3107,7 +3106,7 @@ static int ccs_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)if (ssd == sensor->pixel_array)continue ; - try_comp =v4l2_subdev_get_try_compose (sd, fh->state, i); + try_comp =v4l2_subdev_get_try_compose (sd, sd_state, i); *try_comp = *try_crop; }
@@ -3123,6 +3122,7 @@ static const struct v4l2_subdev_video_ops ccs_video_ops = { };static const struct v4l2_subdev_pad_ops ccs_pad_ops = { + .init_cfg = ccs_init_cfg, .enum_mbus_code = ccs_enum_mbus_code, .get_fmt = ccs_get_format, .set_fmt = ccs_set_format,
@@ -3148,11 +3148,6 @@ static const struct media_entity_operations ccs_entity_ops = {static const struct v4l2_subdev_internal_ops ccs_internal_src_ops = { .registered = ccs_registered, .unregistered = ccs_unregistered, - .open = ccs_open, -}; - -static const struct v4l2_subdev_internal_ops ccs_internal_ops = { - .open = ccs_open, };/* -----------------------------------------------------------------------------
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 6/13 media: ccs: Use sub-device active state
In reply to Sakari AilusMake use of sub-device active state. In most cases the effect on need for acquiring the mutex is non-existent as access to the driver's core data structure still needs to be serialised.
This still removes a lot of code as the code paths for active and try state are the same in many cases.
--- drivers/media/i2c/ccs/ccs-core.c | 296 ++++++++++++------------------- drivers/media/i2c/ccs/ccs.h | 4 +- 2 files changed, 114 insertions(+), 186 deletions(-)
drivers/media/i2c/ccs/ccs-core.c +113 -183
@@ -508,9 +508,8 @@ static void __ccs_update_exposure_limits(struct ccs_sensor *sensor)struct v4l2_ctrl *ctrl = sensor->exposure;int max; - max = sensor->pixel_array->crop[CCS_PA_PAD_SRC ].height - + sensor->vblank->val - -CCS_LIM (sensor,COARSE_INTEGRATION_TIME_MAX_MARGIN ); + max = sensor->pa_src.height + sensor->vblank->val - +CCS_LIM (sensor,COARSE_INTEGRATION_TIME_MAX_MARGIN );__v4l2_ctrl_modify_range (ctrl, ctrl->minimum, max, ctrl->step, max); }
@@ -728,15 +727,12 @@ static int ccs_set_ctrl(struct v4l2_ctrl *ctrl)break ;case V4L2_CID_VBLANK : rval =ccs_write (sensor,FRAME_LENGTH_LINES , - sensor->pixel_array->crop[ -CCS_PA_PAD_SRC ].height - + ctrl->val); + sensor->pa_src.height + ctrl->val);break ;case V4L2_CID_HBLANK : rval =ccs_write (sensor,LINE_LENGTH_PCK , - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].width - + ctrl->val); + sensor->pa_src.width + ctrl->val);break ;case V4L2_CID_TEST_PATTERN :
@@ -1214,15 +1210,13 @@ static void ccs_update_blanking(struct ccs_sensor *sensor) min =max_t (int,CCS_LIM (sensor,MIN_FRAME_BLANKING_LINES ), - min_fll - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].height); - max = max_fll - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].height; + min_fll - sensor->pa_src.height); + max = max_fll - sensor->pa_src.height;__v4l2_ctrl_modify_range (vblank, min, max, vblank->step, min); - min =max_t (int, - min_llp - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].width, - min_lbp); - max = max_llp - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].width; + min =max_t (int, min_llp - sensor->pa_src.width, min_lbp); + max = max_llp - sensor->pa_src.width;__v4l2_ctrl_modify_range (hblank, min, max, hblank->step, min);
@@ -1246,10 +1240,8 @@ static int ccs_pll_blanking_update(struct ccs_sensor *sensor)dev_dbg (&client->dev,"real timeperframe\t100/%d\n" , sensor->pll.pixel_rate_pixel_array / - ((sensor->pixel_array->crop[CCS_PA_PAD_SRC ].width - + sensor->hblank->val) * - (sensor->pixel_array->crop[CCS_PA_PAD_SRC ].height - + sensor->vblank->val) /100 )); + ((sensor->pa_src.width + sensor->hblank->val) * + (sensor->pa_src.height + sensor->vblank->val) /100 ));return 0 ; }
@@ -1756,28 +1748,22 @@ static int ccs_start_streaming(struct ccs_sensor *sensor) goto out;/* Analog crop start coordinates */ - rval =ccs_write (sensor,X_ADDR_START , - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].left); + rval =ccs_write (sensor,X_ADDR_START , sensor->pa_src.left);if (rval <0 ) goto out; - rval =ccs_write (sensor,Y_ADDR_START , - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].top); + rval =ccs_write (sensor,Y_ADDR_START , sensor->pa_src.top);if (rval <0 ) goto out;/* Analog crop end coordinates */ - rval =ccs_write ( - sensor,X_ADDR_END , - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].left - + sensor->pixel_array->crop[CCS_PA_PAD_SRC ].width -1 ); + rval =ccs_write (sensor,X_ADDR_END , + sensor->pa_src.left + sensor->pa_src.width -1 );if (rval <0 ) goto out; - rval =ccs_write ( - sensor,Y_ADDR_END , - sensor->pixel_array->crop[CCS_PA_PAD_SRC ].top - + sensor->pixel_array->crop[CCS_PA_PAD_SRC ].height -1 ); + rval =ccs_write (sensor,Y_ADDR_END , + sensor->pa_src.top + sensor->pa_src.height -1 );if (rval <0 ) goto out;
@@ -1789,27 +1775,23 @@ static int ccs_start_streaming(struct ccs_sensor *sensor)/* Digital crop */ if (CCS_LIM (sensor,DIGITAL_CROP_CAPABILITY ) ==CCS_DIGITAL_CROP_CAPABILITY_INPUT_CROP ) { - rval =ccs_write ( - sensor,DIGITAL_CROP_X_OFFSET , - sensor->scaler->crop[CCS_PAD_SINK ].left); + rval =ccs_write (sensor,DIGITAL_CROP_X_OFFSET , + sensor->scaler_sink.left);if (rval <0 ) goto out; - rval =ccs_write ( - sensor,DIGITAL_CROP_Y_OFFSET , - sensor->scaler->crop[CCS_PAD_SINK ].top); + rval =ccs_write (sensor,DIGITAL_CROP_Y_OFFSET , + sensor->scaler_sink.top);if (rval <0 ) goto out; - rval =ccs_write ( - sensor,DIGITAL_CROP_IMAGE_WIDTH , - sensor->scaler->crop[CCS_PAD_SINK ].width); + rval =ccs_write (sensor,DIGITAL_CROP_IMAGE_WIDTH , + sensor->scaler_sink.width);if (rval <0 ) goto out; - rval =ccs_write ( - sensor,DIGITAL_CROP_IMAGE_HEIGHT , - sensor->scaler->crop[CCS_PAD_SINK ].height); + rval =ccs_write (sensor,DIGITAL_CROP_IMAGE_HEIGHT , + sensor->scaler_sink.height);if (rval <0 ) goto out; }
@@ -1827,12 +1809,10 @@ static int ccs_start_streaming(struct ccs_sensor *sensor) }/* Output size from sensor */ - rval =ccs_write (sensor,X_OUTPUT_SIZE , - sensor->src->crop[CCS_PAD_SRC ].width); + rval =ccs_write (sensor,X_OUTPUT_SIZE , sensor->src_src.width);if (rval <0 ) goto out; - rval =ccs_write (sensor,Y_OUTPUT_SIZE , - sensor->src->crop[CCS_PAD_SRC ].height); + rval =ccs_write (sensor,Y_OUTPUT_SIZE , sensor->src_src.height);if (rval <0 ) goto out;
@@ -2053,24 +2033,8 @@ static int __ccs_get_format(struct v4l2_subdev *subdev,struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *fmt) { - struct ccs_subdev *ssd = to_ccs_subdev(subdev); - -if (fmt->which ==V4L2_SUBDEV_FORMAT_TRY ) { - fmt->format = *v4l2_subdev_get_try_format (subdev, sd_state, - fmt->pad); - }else { -struct v4l2_rect *r; - -if (fmt->pad == ssd->source_pad) - r = &ssd->crop[ssd->source_pad]; -else - r = &ssd->sink_fmt; - - fmt->format.code =__ccs_get_mbus_code (subdev, fmt->pad); - fmt->format.width = r->width; - fmt->format.height = r->height; - fmt->format.field =V4L2_FIELD_NONE ; - } + fmt->format = *v4l2_subdev_get_pad_format(subdev, sd_state, fmt->pad); + fmt->format.code =__ccs_get_mbus_code (subdev, fmt->pad);return 0 ; }
@@ -2092,28 +2056,18 @@ static int ccs_get_format(struct v4l2_subdev *subdev,static void ccs_get_crop_compose (struct v4l2_subdev *subdev,struct v4l2_subdev_state *sd_state,struct v4l2_rect **crops, -struct v4l2_rect **comps,int which) +struct v4l2_rect **comps) {struct ccs_subdev *ssd =to_ccs_subdev (subdev);unsigned int i; -if (which ==V4L2_SUBDEV_FORMAT_ACTIVE ) { -if (crops) -for (i =0 ; i < subdev->entity.num_pads; i++) - crops[i] = &ssd->crop[i]; -if (comps) - *comps = &ssd->compose; - }else { -if (crops) { -for (i =0 ; i < subdev->entity.num_pads; i++) - crops[i] =v4l2_subdev_get_try_crop (subdev, - sd_state, - i); - } -if (comps) - *comps =v4l2_subdev_get_try_compose (subdev, sd_state, -CCS_PAD_SINK ); - } +if (crops) +for (i =0 ; i < subdev->entity.num_pads; i++) + crops[i] = +v4l2_subdev_get_pad_crop (subdev, sd_state, i); +if (comps) + *comps =v4l2_subdev_get_pad_compose (subdev, sd_state, + ssd->sink_pad); }/* Changes require propagation only on sink pad. */
@@ -2125,7 +2079,7 @@ static void ccs_propagate(struct v4l2_subdev *subdev,struct ccs_subdev *ssd =to_ccs_subdev (subdev);struct v4l2_rect *comp, *crops[CCS_PADS ]; -ccs_get_crop_compose (subdev, sd_state, crops, &comp, which); +ccs_get_crop_compose (subdev, sd_state, crops, &comp);switch (target) {case V4L2_SEL_TGT_CROP :
@@ -2136,6 +2090,7 @@ static void ccs_propagate(struct v4l2_subdev *subdev, sensor->scale_m =CCS_LIM (sensor,SCALER_N_MIN ); sensor->scaling_mode =CCS_SCALING_MODE_NO_SCALING ; + sensor->scaler_sink = *comp; }else if (ssd == sensor->binner) { sensor->binning_horizontal =1 ; sensor->binning_vertical =1 ;
@@ -2144,6 +2099,8 @@ static void ccs_propagate(struct v4l2_subdev *subdev, fallthrough;case V4L2_SEL_TGT_COMPOSE : *crops[CCS_PAD_SRC ] = *comp; +if (which ==V4L2_SUBDEV_FORMAT_ACTIVE && ssd == sensor->src) + sensor->src_src = *crops[CCS_PAD_SRC ];break ;default :WARN_ON_ONCE (1 );
@@ -2252,14 +2209,12 @@ static int ccs_set_format(struct v4l2_subdev *subdev,CCS_LIM (sensor,MIN_Y_OUTPUT_SIZE ), CCS_LIM(sensor, MAX_Y_OUTPUT_SIZE)); -ccs_get_crop_compose (subdev, sd_state, crops,NULL , fmt->which); +ccs_get_crop_compose (subdev, sd_state, crops,NULL ); crops[ssd->sink_pad]->left =0 ; crops[ssd->sink_pad]->top =0 ; crops[ssd->sink_pad]->width = fmt->format.width; crops[ssd->sink_pad]->height = fmt->format.height; -if (fmt->which ==V4L2_SUBDEV_FORMAT_ACTIVE ) - ssd->sink_fmt = *crops[ssd->sink_pad];ccs_propagate (subdev, sd_state, fmt->which,V4L2_SEL_TGT_CROP );mutex_unlock (&sensor->mutex);
@@ -2482,7 +2437,7 @@ static int ccs_set_compose(struct v4l2_subdev *subdev,struct ccs_subdev *ssd =to_ccs_subdev (subdev);struct v4l2_rect *comp, *crops[CCS_PADS ]; -ccs_get_crop_compose (subdev, sd_state, crops, &comp, sel->which); +ccs_get_crop_compose (subdev, sd_state, crops, &comp); sel->r.top =0 ; sel->r.left =0 ;
@@ -2501,8 +2456,8 @@ static int ccs_set_compose(struct v4l2_subdev *subdev,return 0 ; } -static int __ccs_sel_supported (struct v4l2_subdev *subdev, -struct v4l2_subdev_selection *sel) +static int ccs_sel_supported (struct v4l2_subdev *subdev, +struct v4l2_subdev_selection *sel) {struct ccs_sensor *sensor =to_ccs_sensor (subdev);struct ccs_subdev *ssd =to_ccs_subdev (subdev);
@@ -2545,33 +2500,18 @@ static int ccs_set_crop(struct v4l2_subdev *subdev, {struct ccs_sensor *sensor =to_ccs_sensor (subdev);struct ccs_subdev *ssd =to_ccs_subdev (subdev); -struct v4l2_rect *src_size, *crops[CCS_PADS ]; -struct v4l2_rect _r; +struct v4l2_rect src_size = {0 }, *crops[CCS_PADS ], *comp; -ccs_get_crop_compose (subdev, sd_state, crops,NULL , sel->which); +ccs_get_crop_compose (subdev, sd_state, crops, &comp); -if (sel->which ==V4L2_SUBDEV_FORMAT_ACTIVE ) { -if (sel->pad == ssd->sink_pad) - src_size = &ssd->sink_fmt; -else - src_size = &ssd->compose; +if (sel->pad == ssd->sink_pad) { +struct v4l2_mbus_framefmt *mfmt = +v4l2_subdev_get_pad_format (subdev, sd_state, sel->pad); + + src_size.width = mfmt->width; + src_size.height = mfmt->height; }else { -if (sel->pad == ssd->sink_pad) { - _r.left =0 ; - _r.top =0 ; - _r.width =v4l2_subdev_get_try_format (subdev, - sd_state, - sel->pad) - ->width; - _r.height =v4l2_subdev_get_try_format (subdev, - sd_state, - sel->pad) - ->height; - src_size = &_r; - }else { - src_size =v4l2_subdev_get_try_compose ( - subdev, sd_state, ssd->sink_pad); - } + src_size = *comp; }if (ssd == sensor->src && sel->pad ==CCS_PAD_SRC ) {
@@ -2579,16 +2519,19 @@ static int ccs_set_crop(struct v4l2_subdev *subdev, sel->r.top =0 ; } - sel->r.width =min (sel->r.width, src_size->width); - sel->r.height =min (sel->r.height, src_size->height); + sel->r.width =min (sel->r.width, src_size.width); + sel->r.height =min (sel->r.height, src_size.height); - sel->r.left =min_t (int, sel->r.left, src_size->width - sel->r.width); - sel->r.top =min_t (int, sel->r.top, src_size->height - sel->r.height); + sel->r.left =min_t (int, sel->r.left, src_size.width - sel->r.width); + sel->r.top =min_t (int, sel->r.top, src_size.height - sel->r.height); *crops[sel->pad] = sel->r;if (ssd != sensor->pixel_array && sel->pad ==CCS_PAD_SINK )ccs_propagate (subdev, sd_state, sel->which,V4L2_SEL_TGT_CROP ); +else if (sel->which ==V4L2_SUBDEV_FORMAT_ACTIVE && + ssd == sensor->pixel_array) + sensor->pa_src = sel->r;return 0 ; }
@@ -2601,44 +2544,36 @@ static void ccs_get_native_size(struct ccs_subdev *ssd, struct v4l2_rect *r) r->height =CCS_LIM (ssd->sensor,Y_ADDR_MAX ) +1 ; } -static int __ccs_get_selection (struct v4l2_subdev *subdev, -struct v4l2_subdev_state *sd_state, -struct v4l2_subdev_selection *sel) +static int ccs_get_selection (struct v4l2_subdev *subdev, +struct v4l2_subdev_state *sd_state, +struct v4l2_subdev_selection *sel) {struct ccs_sensor *sensor =to_ccs_sensor (subdev);struct ccs_subdev *ssd =to_ccs_subdev (subdev);struct v4l2_rect *comp, *crops[CCS_PADS ]; -struct v4l2_rect sink_fmt;int ret; - ret =__ccs_sel_supported (subdev, sel); + ret =ccs_sel_supported (subdev, sel);if (ret)return ret; -ccs_get_crop_compose (subdev, sd_state, crops, &comp, sel->which); - -if (sel->which ==V4L2_SUBDEV_FORMAT_ACTIVE ) { - sink_fmt = ssd->sink_fmt; - }else { -struct v4l2_mbus_framefmt *fmt = -v4l2_subdev_get_try_format (subdev, sd_state, - ssd->sink_pad); - - sink_fmt.left =0 ; - sink_fmt.top =0 ; - sink_fmt.width = fmt->width; - sink_fmt.height = fmt->height; - } +ccs_get_crop_compose (subdev, sd_state, crops, &comp);switch (sel->target) {case V4L2_SEL_TGT_CROP_BOUNDS :case V4L2_SEL_TGT_NATIVE_SIZE : -if (ssd == sensor->pixel_array) +if (ssd == sensor->pixel_array) {ccs_get_native_size (ssd, &sel->r); -else if (sel->pad == ssd->sink_pad) - sel->r = sink_fmt; -else + }else if (sel->pad == ssd->sink_pad) { +struct v4l2_mbus_framefmt *sink_fmt = +v4l2_subdev_get_pad_format (subdev, sd_state, + ssd->sink_pad); + sel->r.top = sel->r.left =0 ; + sel->r.width = sink_fmt->width; + sel->r.height = sink_fmt->height; + }else { sel->r = *comp; + }break ;case V4L2_SEL_TGT_CROP :case V4L2_SEL_TGT_COMPOSE_BOUNDS :
@@ -2652,20 +2587,6 @@ static int __ccs_get_selection(struct v4l2_subdev *subdev,return 0 ; } -static int ccs_get_selection (struct v4l2_subdev *subdev, -struct v4l2_subdev_state *sd_state, -struct v4l2_subdev_selection *sel) -{ -struct ccs_sensor *sensor =to_ccs_sensor (subdev); -int rval; - -mutex_lock (&sensor->mutex); - rval =__ccs_get_selection (subdev, sd_state, sel); -mutex_unlock (&sensor->mutex); - -return rval; -} -static int ccs_set_selection (struct v4l2_subdev *subdev,struct v4l2_subdev_state *sd_state,struct v4l2_subdev_selection *sel)
@@ -2673,7 +2594,7 @@ static int ccs_set_selection(struct v4l2_subdev *subdev,struct ccs_sensor *sensor =to_ccs_sensor (subdev);int ret; - ret =__ccs_sel_supported (subdev, sel); + ret =ccs_sel_supported (subdev, sel);if (ret)return ret;
@@ -2964,10 +2885,14 @@ static int ccs_register_subdev(struct ccs_sensor *sensor,return rval; } + rval =v4l2_subdev_init_finalize (&ssd->sd); +if (rval) + goto out_media_entity_cleanup; + rval =v4l2_device_register_subdev (sensor->src->sd.v4l2_dev, &ssd->sd);if (rval) {dev_err (&client->dev,"v4l2_device_register_subdev failed\n" ); - goto out_media_entity_cleanup; + goto out_v4l2_subdev_cleanup; } rval = media_create_pad_link(&ssd->sd.entity, source_pad,
@@ -2983,6 +2908,9 @@ static int ccs_register_subdev(struct ccs_sensor *sensor, out_v4l2_device_unregister_subdev:v4l2_device_unregister_subdev (&ssd->sd); +out_v4l2_subdev_cleanup: +v4l2_subdev_cleanup (&ssd->sd); + out_media_entity_cleanup:media_entity_cleanup (&ssd->sd.entity);
@@ -3059,16 +2987,9 @@ static void ccs_create_subdev(struct ccs_sensor *sensor,v4l2_i2c_subdev_set_name (&ssd->sd, client, sensor->minfo.name, name); -ccs_get_native_size (ssd, &ssd->sink_fmt); - - ssd->compose.width = ssd->sink_fmt.width; - ssd->compose.height = ssd->sink_fmt.height; - ssd->crop[ssd->source_pad] = ssd->compose; ssd->pads[ssd->source_pad].flags =MEDIA_PAD_FL_SOURCE ; -if (ssd != sensor->pixel_array) { - ssd->crop[ssd->sink_pad] = ssd->compose; +if (ssd != sensor->pixel_array) ssd->pads[ssd->sink_pad].flags =MEDIA_PAD_FL_SINK ; - } ssd->sd.entity.ops = &ccs_entity_ops;
@@ -3090,24 +3011,24 @@ static int ccs_init_cfg(struct v4l2_subdev *sd,mutex_lock (&sensor->mutex);for (i =0 ; i < ssd->npads; i++) { -struct v4l2_mbus_framefmt *try_fmt = -v4l2_subdev_get_try_format (sd, sd_state, i); -struct v4l2_rect *try_crop = -v4l2_subdev_get_try_crop (sd, sd_state, i); -struct v4l2_rect *try_comp; +struct v4l2_mbus_framefmt *fmt = +v4l2_subdev_get_pad_format (sd, sd_state, i); +struct v4l2_rect *crop = +v4l2_subdev_get_pad_crop (sd, sd_state, i); +struct v4l2_rect *comp; -ccs_get_native_size (ssd, try_crop); +ccs_get_native_size (ssd, crop); - try_fmt->width = try_crop->width; - try_fmt->height = try_crop->height; - try_fmt->code = sensor->internal_csi_format->code; - try_fmt->field =V4L2_FIELD_NONE ; + fmt->width = crop->width; + fmt->height = crop->height; + fmt->code = sensor->internal_csi_format->code; + fmt->field =V4L2_FIELD_NONE ;if (ssd == sensor->pixel_array)continue ; - try_comp =v4l2_subdev_get_try_compose (sd, sd_state, i); - *try_comp = *try_crop; + comp =v4l2_subdev_get_pad_compose (sd, sd_state, i); + *comp = *crop; }mutex_unlock (&sensor->mutex);
@@ -3580,25 +3501,30 @@ static int ccs_probe(struct i2c_client *client) goto out_cleanup; } + rval =media_entity_pads_init (&sensor->src->sd.entity, + sensor->src->npads, + sensor->src->pads); +if (rval <0 ) + goto out_cleanup; + + rval =v4l2_subdev_init_finalize (&sensor->src->sd); +if (rval) + goto out_media_entity_cleanup; +mutex_lock (&sensor->mutex); rval =ccs_pll_blanking_update (sensor);mutex_unlock (&sensor->mutex);if (rval) {dev_err (&client->dev,"update mode failed\n" ); - goto out_cleanup; + goto out_subdev_cleanup; } sensor->streaming = false; sensor->dev_init_done = true; - rval =media_entity_pads_init (&sensor->src->sd.entity,2 , - sensor->src->pads); -if (rval <0 ) - goto out_media_entity_cleanup; - rval =ccs_write_msr_regs (sensor);if (rval) - goto out_media_entity_cleanup; + goto out_subdev_cleanup;pm_runtime_set_active (&client->dev);pm_runtime_get_noresume (&client->dev);
@@ -3618,6 +3544,9 @@ static int ccs_probe(struct i2c_client *client)pm_runtime_put_noidle (&client->dev);pm_runtime_disable (&client->dev); +out_subdev_cleanup: +v4l2_subdev_cleanup (&sensor->src->sd); + out_media_entity_cleanup:media_entity_cleanup (&sensor->src->sd.entity);
@@ -3655,6 +3584,7 @@ static void ccs_remove(struct i2c_client *client)for (i =0 ; i < sensor->ssds_used; i++) {v4l2_device_unregister_subdev (&sensor->ssds[i].sd); +v4l2_subdev_cleanup (subdev);media_entity_cleanup (&sensor->ssds[i].sd.entity); }ccs_cleanup (sensor);
drivers/media/i2c/ccs/ccs.h +1 -3
@@ -182,9 +182,6 @@ struct ccs_binning_subtype {struct ccs_subdev {struct v4l2_subdev sd;struct media_pad pads[CCS_PADS ]; -struct v4l2_rect sink_fmt; -struct v4l2_rect crop[CCS_PADS ]; -struct v4l2_rect compose;/* compose on sink */ unsigned short sink_pad;unsigned short source_pad;int npads;
@@ -220,6 +217,7 @@ struct ccs_sensor {u32 mbus_frame_fmts;const struct ccs_csi_data_format *csi_format;const struct ccs_csi_data_format *internal_csi_format; +struct v4l2_rect pa_src, scaler_sink, src_src;u32 default_mbus_frame_fmts;int default_pixel_order;struct ccs_data_container sdata, mdata;
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 7/13 media: ov2740: Enable runtime PM before registering the async subdev
In reply to Sakari AilusEnable runtime PM before registering the async subdev as the driver UAPI may become accessible immediately after the registration. Runtime PM needs to be enabled by that time.
--- drivers/media/i2c/ov2740.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/media/i2c/ov2740.c +8 -6
@@ -1130,6 +1130,12 @@ static int ov2740_probe(struct i2c_client *client) goto probe_error_v4l2_ctrl_handler_free; } +/* Set the device's state to active if it's in D0 state. */ +if (full_power) +pm_runtime_set_active (&client->dev); +pm_runtime_enable (&client->dev); +pm_runtime_idle (&client->dev); + ret =v4l2_async_register_subdev_sensor (&ov2740->sd);if (ret <0 ) {dev_err_probe (dev, ret,"failed to register V4L2 subdev\n" );
@@ -1140,16 +1146,12 @@ static int ov2740_probe(struct i2c_client *client)if (ret)dev_warn (&client->dev,"register nvmem failed, ret %d\n" , ret); -/* Set the device's state to active if it's in D0 state. */ -if (full_power) -pm_runtime_set_active (&client->dev); -pm_runtime_enable (&client->dev); -pm_runtime_idle (&client->dev); -return 0 ; probe_error_media_entity_cleanup:media_entity_cleanup (&ov2740->sd.entity); +pm_runtime_disable (&client->dev); +pm_runtime_set_suspended (&client->dev); probe_error_v4l2_ctrl_handler_free:v4l2_ctrl_handler_free (ov2740->sd.ctrl_handler);
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 8/13 media: ov2740: Use sub-device active state
In reply to Sakari AilusUse sub-device active state. Rely on control handler lock to serialise access to the active state. Also clean up locking on s_stream handler.
--- drivers/media/i2c/ov2740.c | 109 ++++++++++++++----------------------- 1 file changed, 42 insertions(+), 67 deletions(-)
drivers/media/i2c/ov2740.c +42 -67
@@ -336,9 +336,6 @@ struct ov2740 {/* Current mode */ const struct ov2740_mode *cur_mode; -/* To serialize asynchronus callbacks */ -struct mutex mutex; -/* NVM data inforamtion */ struct nvm_data *nvm;
@@ -579,7 +576,6 @@ static int ov2740_init_controls(struct ov2740 *ov2740)if (ret)return ret; - ctrl_hdlr->lock = &ov2740->mutex; cur_mode = ov2740->cur_mode; size =ARRAY_SIZE (link_freq_menu_items);
@@ -789,15 +785,15 @@ static int ov2740_set_stream(struct v4l2_subdev *sd, int enable) {struct ov2740 *ov2740 =to_ov2740 (sd);struct i2c_client *client =v4l2_get_subdevdata (sd); +struct v4l2_subdev_state *sd_state;int ret =0 ; -mutex_lock (&ov2740->mutex); + sd_state =v4l2_subdev_lock_and_get_active_state (&ov2740->sd); +if (enable) { ret =pm_runtime_resume_and_get (&client->dev); -if (ret <0 ) { -mutex_unlock (&ov2740->mutex); -return ret; - } +if (ret <0 ) + goto out_unlock; ret =ov2740_start_streaming (ov2740);if (ret) {
@@ -810,7 +806,8 @@ static int ov2740_set_stream(struct v4l2_subdev *sd, int enable)pm_runtime_put (&client->dev); } -mutex_unlock (&ov2740->mutex); +out_unlock: +v4l2_subdev_unlock_state (sd_state);return ret; }
@@ -828,48 +825,26 @@ static int ov2740_set_format(struct v4l2_subdev *sd, height, fmt->format.width, fmt->format.height); -mutex_lock (&ov2740->mutex);ov2740_update_pad_format (mode, &fmt->format); -if (fmt->which ==V4L2_SUBDEV_FORMAT_TRY ) { - *v4l2_subdev_get_try_format (sd, sd_state, fmt->pad) = fmt->format; - }else { - ov2740->cur_mode = mode; -__v4l2_ctrl_s_ctrl (ov2740->link_freq, mode->link_freq_index); -__v4l2_ctrl_s_ctrl_int64 (ov2740->pixel_rate, -to_pixel_rate (mode->link_freq_index)); - -/* Update limits and set FPS to default */ - vblank_def = mode->vts_def - mode->height; -__v4l2_ctrl_modify_range (ov2740->vblank, - mode->vts_min - mode->height, -OV2740_VTS_MAX - mode->height,1 , - vblank_def); -__v4l2_ctrl_s_ctrl (ov2740->vblank, vblank_def); - h_blank =to_pixels_per_line (mode->hts, mode->link_freq_index) - - mode->width; -__v4l2_ctrl_modify_range (ov2740->hblank, h_blank, h_blank,1 , - h_blank); - } -mutex_unlock (&ov2740->mutex); + *v4l2_subdev_get_pad_format (sd, sd_state, fmt->pad) = fmt->format; -return 0 ; -} - -static int ov2740_get_format (struct v4l2_subdev *sd, -struct v4l2_subdev_state *sd_state, -struct v4l2_subdev_format *fmt) -{ -struct ov2740 *ov2740 =to_ov2740 (sd); - -mutex_lock (&ov2740->mutex);if (fmt->which ==V4L2_SUBDEV_FORMAT_TRY ) - fmt->format = *v4l2_subdev_get_try_format (&ov2740->sd, - sd_state, - fmt->pad); -else -ov2740_update_pad_format (ov2740->cur_mode, &fmt->format); +return 0 ; -mutex_unlock (&ov2740->mutex); + ov2740->cur_mode = mode; +__v4l2_ctrl_s_ctrl (ov2740->link_freq, mode->link_freq_index); +__v4l2_ctrl_s_ctrl_int64 (ov2740->pixel_rate, +to_pixel_rate (mode->link_freq_index)); + +/* Update limits and set FPS to default */ + vblank_def = mode->vts_def - mode->height; +__v4l2_ctrl_modify_range (ov2740->vblank, + mode->vts_min - mode->height, +OV2740_VTS_MAX - mode->height,1 , vblank_def); +__v4l2_ctrl_s_ctrl (ov2740->vblank, vblank_def); + h_blank =to_pixels_per_line (mode->hts, mode->link_freq_index) - + mode->width; +__v4l2_ctrl_modify_range (ov2740->hblank, h_blank, h_blank,1 , h_blank);return 0 ; }
@@ -904,14 +879,11 @@ static int ov2740_enum_frame_size(struct v4l2_subdev *sd,return 0 ; } -static int ov2740_open (struct v4l2_subdev *sd,struct v4l2_subdev_fh *fh) +static int ov2740_init_cfg (struct v4l2_subdev *sd, +struct v4l2_subdev_state *sd_state) { -struct ov2740 *ov2740 =to_ov2740 (sd); - -mutex_lock (&ov2740->mutex);ov2740_update_pad_format (&supported_modes[0 ], -v4l2_subdev_get_try_format (sd, fh->state,0 )); -mutex_unlock (&ov2740->mutex); +v4l2_subdev_get_pad_format (sd, sd_state,0 ));return 0 ; }
@@ -921,10 +893,11 @@ static const struct v4l2_subdev_video_ops ov2740_video_ops = { };static const struct v4l2_subdev_pad_ops ov2740_pad_ops = { + .get_fmt = v4l2_subdev_get_fmt, .set_fmt = ov2740_set_format, - .get_fmt = ov2740_get_format, .enum_mbus_code = ov2740_enum_mbus_code, .enum_frame_size = ov2740_enum_frame_size, + .init_cfg = ov2740_init_cfg, };static const struct v4l2_subdev_ops ov2740_subdev_ops = {
@@ -936,10 +909,6 @@ static const struct media_entity_operations ov2740_subdev_entity_ops = { .link_validate = v4l2_subdev_link_validate, }; -static const struct v4l2_subdev_internal_ops ov2740_internal_ops = { - .open = ov2740_open, -}; -static int ov2740_check_hwcfg (struct device *dev) {struct fwnode_handle *ep;
@@ -1005,13 +974,12 @@ static int ov2740_check_hwcfg(struct device *dev)static void ov2740_remove (struct i2c_client *client) {struct v4l2_subdev *sd =i2c_get_clientdata (client); -struct ov2740 *ov2740 =to_ov2740 (sd);v4l2_async_unregister_subdev (sd);media_entity_cleanup (&sd->entity); +v4l2_subdev_cleanup (sd);v4l2_ctrl_handler_free (sd->ctrl_handler);pm_runtime_disable (&client->dev); -mutex_destroy (&ov2740->mutex); } static int ov2740_nvmem_read(void *priv, unsigned int off, void *val,
@@ -1020,9 +988,11 @@ static int ov2740_nvmem_read(void *priv, unsigned int off, void *val,struct nvm_data *nvm = priv;struct device *dev =regmap_get_device (nvm->regmap);struct ov2740 *ov2740 =to_ov2740 (dev_get_drvdata (dev)); +struct v4l2_subdev_state *sd_state;int ret =0 ; -mutex_lock (&ov2740->mutex); +/* Serialise sensor access */ + sd_state =v4l2_subdev_lock_and_get_active_state (&ov2740->sd);if (nvm->nvm_buffer) {memcpy (val, nvm->nvm_buffer + off, count);
@@ -1040,7 +1010,7 @@ static int ov2740_nvmem_read(void *priv, unsigned int off, void *val,pm_runtime_put (dev); exit: -mutex_unlock (&ov2740->mutex); +v4l2_subdev_unlock_state (sd_state);return ret; }
@@ -1111,7 +1081,6 @@ static int ov2740_probe(struct i2c_client *client)return dev_err_probe (dev, ret,"failed to find sensor\n" ); } -mutex_init (&ov2740->mutex); ov2740->cur_mode = &supported_modes[0 ]; ret =ov2740_init_controls (ov2740);if (ret) {
@@ -1119,7 +1088,7 @@ static int ov2740_probe(struct i2c_client *client) goto probe_error_v4l2_ctrl_handler_free; } - ov2740->sd.internal_ops = &ov2740_internal_ops; + ov2740->sd.state_lock = ov2740->ctrl_handler.lock; ov2740->sd.flags |=V4L2_SUBDEV_FL_HAS_DEVNODE ; ov2740->sd.entity.ops = &ov2740_subdev_entity_ops; ov2740->sd.entity.function =MEDIA_ENT_F_CAM_SENSOR ;
@@ -1130,6 +1099,10 @@ static int ov2740_probe(struct i2c_client *client) goto probe_error_v4l2_ctrl_handler_free; } + ret =v4l2_subdev_init_finalize (&ov2740->sd); +if (ret) + goto probe_error_media_entity_cleanup; +/* Set the device's state to active if it's in D0 state. */ if (full_power)pm_runtime_set_active (&client->dev);
@@ -1139,7 +1112,7 @@ static int ov2740_probe(struct i2c_client *client) ret =v4l2_async_register_subdev_sensor (&ov2740->sd);if (ret <0 ) {dev_err_probe (dev, ret,"failed to register V4L2 subdev\n" ); - goto probe_error_media_entity_cleanup; + goto probe_error_v4l2_subdev_cleanup; } ret =ov2740_register_nvmem (client, ov2740);
@@ -1148,6 +1121,9 @@ static int ov2740_probe(struct i2c_client *client)return 0 ; +probe_error_v4l2_subdev_cleanup: +v4l2_subdev_cleanup (&ov2740->sd); + probe_error_media_entity_cleanup:media_entity_cleanup (&ov2740->sd.entity);pm_runtime_disable (&client->dev);
@@ -1155,7 +1131,6 @@ static int ov2740_probe(struct i2c_client *client) probe_error_v4l2_ctrl_handler_free:v4l2_ctrl_handler_free (ov2740->sd.ctrl_handler); -mutex_destroy (&ov2740->mutex);return ret; }
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 9/13 media: ov2740: Return -EPROBE_DEFER if no endpoint is found
In reply to Sakari AilusWith ipu bridge, endpoints may only be created when ipu bridge has initialised. This may happen after the sensor driver has first probed.
--- drivers/media/i2c/ov2740.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/ov2740.c +1 -1
@@ -931,7 +931,7 @@ static int ov2740_check_hwcfg(struct device *dev) ep =fwnode_graph_get_next_endpoint (fwnode,NULL );if (!ep) -return -ENXIO ; +return -EPROBE_DEFER ; ret =v4l2_fwnode_endpoint_alloc_parse (ep, &bus_cfg);fwnode_handle_put (ep);
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 10/13 media: v4l: subdev: Clear frame descriptor before get_frame_desc
In reply to Sakari AilusClear frame descriptor before calling transmitter's get_frame_desc() op. Also remove the corresponding memset() calls from drivers.
--- drivers/media/i2c/ds90ub913.c | 2 -- drivers/media/i2c/ds90ub953.c | 2 -- drivers/media/i2c/ds90ub960.c | 2 -- drivers/media/platform/nxp/imx-mipi-csis.c | 2 -- drivers/media/v4l2-core/v4l2-subdev.c | 9 +++++++++ 5 files changed, 9 insertions(+), 8 deletions(-)
drivers/media/i2c/ds90ub913.c +0 -2
@@ -362,8 +362,6 @@ static int ub913_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,if (ret)return ret; -memset (fd,0 ,sizeof (*fd)); - fd->type =V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL ; state =v4l2_subdev_lock_and_get_active_state (sd);
drivers/media/i2c/ds90ub953.c +0 -2
@@ -499,8 +499,6 @@ static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,if (ret)return ret; -memset (fd,0 ,sizeof (*fd)); - fd->type =V4L2_MBUS_FRAME_DESC_TYPE_CSI2 ; state =v4l2_subdev_lock_and_get_active_state (sd);
drivers/media/i2c/ds90ub960.c +0 -2
@@ -2786,8 +2786,6 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,if (!ub960_pad_is_source (priv, pad))return -EINVAL ; -memset (fd,0 ,sizeof (*fd)); - fd->type =V4L2_MBUS_FRAME_DESC_TYPE_CSI2 ; state =v4l2_subdev_lock_and_get_active_state (&priv->sd);
drivers/media/platform/nxp/imx-mipi-csis.c +0 -2
@@ -1114,8 +1114,6 @@ static int mipi_csis_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, fd->type =V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL ; fd->num_entries =1 ; -memset (entry,0 ,sizeof (*entry)); - entry->flags =0 ; entry->pixelcode = csis_fmt->code; entry->bus.csi2.vc =0 ;
drivers/media/v4l2-core/v4l2-subdev.c +9 -0
@@ -306,6 +306,14 @@ static int call_set_selection(struct v4l2_subdev *sd, sd->ops->pad->set_selection (sd, state, sel); } +static int call_get_frame_desc (struct v4l2_subdev *sd,unsigned int pad, +struct v4l2_mbus_frame_desc *fd) +{ +memset (fd,0 ,sizeof (*fd)); + +return sd->ops->pad->get_frame_desc (sd, pad, fd); +} +static inline int check_edid (struct v4l2_subdev *sd,struct v4l2_subdev_edid *edid) {
@@ -446,6 +454,7 @@ static const struct v4l2_subdev_pad_ops v4l2_subdev_call_pad_wrappers = { .set_edid = call_set_edid, .dv_timings_cap = call_dv_timings_cap, .enum_dv_timings = call_enum_dv_timings, + .get_frame_desc = call_get_frame_desc, .get_mbus_config = call_get_mbus_config, };
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 11/13 media: v4l: subdev: Print debug information on frame descriptor
In reply to Sakari AilusPrint debug level information on returned frame descriptors.
--- drivers/media/v4l2-core/v4l2-subdev.c | 31 ++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
drivers/media/v4l2-core/v4l2-subdev.c +30 -1
@@ -15,6 +15,7 @@#include <linux/module.h> #include <linux/overflow.h> #include <linux/slab.h> +#include <linux/string.h> #include <linux/types.h> #include <linux/version.h> #include <linux/videodev2.h>
@@ -309,9 +310,37 @@ static int call_set_selection(struct v4l2_subdev *sd,static int call_get_frame_desc (struct v4l2_subdev *sd,unsigned int pad,struct v4l2_mbus_frame_desc *fd) { +unsigned int i; +int ret; +memset (fd,0 ,sizeof (*fd)); -return sd->ops->pad->get_frame_desc (sd, pad, fd); + ret = sd->ops->pad->get_frame_desc (sd, pad, fd); +if (ret) +return ret; + +dev_dbg (sd->dev,"Frame descriptor on pad %u, type %s\n" , pad, + fd->type ==V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL ?"parallel" : + fd->type ==V4L2_MBUS_FRAME_DESC_TYPE_CSI2 ?"CSI-2" : +"unknown" ); + +for (i =0 ; i < fd->num_entries; i++) { +struct v4l2_mbus_frame_desc_entry *entry = &fd->entry[i]; +char buf[20 ] ="" ; + +if (fd->type ==V4L2_MBUS_FRAME_DESC_TYPE_CSI2 ) +WARN_ON (snprintf (buf,sizeof (buf), +", vc %u, dt 0x%02x" , + entry->bus.csi2.vc, + entry->bus.csi2.dt) >=sizeof (buf)); + +dev_dbg (sd->dev, +"\tstream %u, code 0x%04x, length %u, flags 0x%04x%s\n" , + entry->stream, entry->pixelcode, entry->length, + entry->flags, buf); + } + +return 0 ; } static inline int check_edid(struct v4l2_subdev *sd,
Signature · 1 line
2.39.2
Re: [PATCH v6 11/13] media: v4l: subdev: Print debug information on frame descriptor
Hi Sakari,
Thank you for the patch.
Quoted 3 lines · Sakari Ailus
Print debug level information on returned frame descriptors.
Signed-off-by Sakari Ailus <[email protected]>
Quoted 55 lines
--- drivers/media/v4l2-core/v4l2-subdev.c | 31 ++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)drivers/media/v4l2-core/v4l2-subdev.c +30
-1@@ -15,6 +15,7 @@#include <linux/module.h> #include <linux/overflow.h> #include <linux/slab.h> +#include <linux/string.h> #include <linux/types.h> #include <linux/version.h> #include <linux/videodev2.h> @@ -309,9 +310,37 @@ static int call_set_selection(struct v4l2_subdev *sd,static int call_get_frame_desc (struct v4l2_subdev *sd,unsigned int pad,struct v4l2_mbus_frame_desc *fd) { +unsigned int i; +int ret; +memset (fd,0 ,sizeof (*fd)); -return sd->ops->pad->get_frame_desc (sd, pad, fd); + ret = sd->ops->pad->get_frame_desc (sd, pad, fd); +if (ret) +return ret; + +dev_dbg (sd->dev,"Frame descriptor on pad %u, type %s\n" , pad, + fd->type ==V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL ?"parallel" : + fd->type ==V4L2_MBUS_FRAME_DESC_TYPE_CSI2 ?"CSI-2" : +"unknown" ); + +for (i =0 ; i < fd->num_entries; i++) { +struct v4l2_mbus_frame_desc_entry *entry = &fd->entry[i]; +char buf[20 ] ="" ; + +if (fd->type ==V4L2_MBUS_FRAME_DESC_TYPE_CSI2 ) +WARN_ON (snprintf (buf,sizeof (buf), +", vc %u, dt 0x%02x" , + entry->bus.csi2.vc, + entry->bus.csi2.dt) >=sizeof (buf)); + +dev_dbg (sd->dev, +"\tstream %u, code 0x%04x, length %u, flags 0x%04x%s\n" , + entry->stream, entry->pixelcode, entry->length, + entry->flags, buf); + } + +return 0 ; } static inline int check_edid(struct v4l2_subdev *sd,
Signature · 3 lines
Regards, Laurent Pinchart
Sakari Ailus
maintainerPATCH v6 12/13 media: mc: Check pad flag validity
In reply to Sakari AilusCheck the validity of pad flags on entity init. Exactly one of the flags must be set.
--- drivers/media/mc/mc-entity.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/media/mc/mc-entity.c +14 -1
@@ -197,6 +197,7 @@ int media_entity_pads_init(struct media_entity *entity, u16 num_pads,struct media_device *mdev = entity->graph_obj.mdev;struct media_pad *iter;unsigned int i =0 ; +int ret =0 ;if (num_pads >=MEDIA_ENTITY_MAX_PADS )return -E2BIG ;
@@ -210,15 +211,27 @@ int media_entity_pads_init(struct media_entity *entity, u16 num_pads,media_entity_for_each_pad (entity, iter) { iter->entity = entity; iter->index = i++; + +if (hweight32 (iter->flags & (MEDIA_PAD_FL_SINK | +MEDIA_PAD_FL_SOURCE )) !=1 ) { + ret = -EINVAL ; +break ; + } +if (mdev)media_gobj_create (mdev,MEDIA_GRAPH_PAD , &iter->graph_obj); } +if (ret && mdev) { +media_entity_for_each_pad (entity, iter) +media_gobj_destroy (&iter->graph_obj); + } +if (mdev)mutex_unlock (&mdev->graph_mutex); -return 0 ; +return ret; }EXPORT_SYMBOL_GPL (media_entity_pads_init);
Signature · 1 line
2.39.2
Sakari Ailus
maintainerPATCH v6 13/13 media: Add MIPI CSI-2 generic long packet type definition
In reply to Sakari AilusAdd a definition for MIPI CSI-2 generic long packet types. The generic long packet types are numbered from 1 to 4.
--- include/media/mipi-csi2.h | 1 + 1 file changed, 1 insertion(+)
include/media/mipi-csi2.h +1 -0
@@ -19,6 +19,7 @@#define MIPI_CSI2_DT_NULL 0x10#define MIPI_CSI2_DT_BLANKING 0x11#define MIPI_CSI2_DT_EMBEDDED_8B 0x12 +#define MIPI_CSI2_DT_GENERIC_LONG (n) (0x12 + (n))/* 1..4 */ #define MIPI_CSI2_DT_YUV420_8B 0x18#define MIPI_CSI2_DT_YUV420_10B 0x19#define MIPI_CSI2_DT_YUV420_8B_LEGACY 0x1a
Signature · 1 line
2.39.2
Re: [PATCH v6 13/13] media: Add MIPI CSI-2 generic long packet type definition
Hi Sakari,
Thank you for the patch.
Quoted 13 lines · Sakari Ailus
Add a definition for MIPI CSI-2 generic long packet types. The generic long packet types are numbered from 1 to 4.
Signed-off-by Sakari Ailus <[email protected]>--- include/media/mipi-csi2.h | 1 + 1 file changed, 1 insertion(+)include/media/mipi-csi2.h +0
-0
include/media/mipi-csi2.h line 22
Quoted 4 lines
include/media/mipi-csi2.h +1
-0@@ -19,6 +19,7 @@#define MIPI_CSI2_DT_NULL 0x10#define MIPI_CSI2_DT_BLANKING 0x11#define MIPI_CSI2_DT_EMBEDDED_8B 0x12 +#define MIPI_CSI2_DT_GENERIC_LONG (n) (0x12 + (n))/* 1..4 */
I would write
#define MIPI_CSI2_DT_GENERIC_LONG(n) (0x13 + (n) - 1) /* 1..4 */
to make it clear there's no overlap with MIPI_CSI2_DT_EMBEDDED_8B. Up to you.
Quoted 3 lines
include/media/mipi-csi2.h +0
-0#define MIPI_CSI2_DT_YUV420_8B 0x18#define MIPI_CSI2_DT_YUV420_10B 0x19#define MIPI_CSI2_DT_YUV420_8B_LEGACY 0x1a
Signature · 3 lines
Regards, Laurent Pinchart
Sakari Ailus
maintainerPATCH v7 13/13 media: Add MIPI CSI-2 generic long packet type definition
In reply to Sakari AilusAdd a definition for MIPI CSI-2 generic long packet types. The generic long packet types are numbered from 1 to 4.
--- include/media/mipi-csi2.h | 1 + 1 file changed, 1 insertion(+)
include/media/mipi-csi2.h +1 -0
@@ -19,6 +19,7 @@#define MIPI_CSI2_DT_NULL 0x10#define MIPI_CSI2_DT_BLANKING 0x11#define MIPI_CSI2_DT_EMBEDDED_8B 0x12 +#define MIPI_CSI2_DT_GENERIC_LONG (n) (0x13 + (n) - 1)/* 1..4 */ #define MIPI_CSI2_DT_YUV420_8B 0x18#define MIPI_CSI2_DT_YUV420_10B 0x19#define MIPI_CSI2_DT_YUV420_8B_LEGACY 0x1a
Signature · 1 line
2.39.2