dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
Subsystems (5)
PATCH v2 1/2 dt-bindings: clocks: qcom,gcc-ipq8074: allow QMP PCI PHY PIPE clocks
Allow passing QMP PCI PHY PIPE clocks to the IPQ8074 GCC to avoid having to do a global matching by name.
--- Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +4 -0
@@ -27,11 +27,15 @@ properties: items: - description: board XO clock - description: sleep clock + - description: Gen3 QMP PCIe PHY PIPE clock + - description: Gen2 QMP PCIe PHY PIPE clock clock-names: items: - const: xo - const: sleep_clk + - const: pcie0_pipe + - const: pcie1_pipe required: - compatible
Signature · 1 line
2.41.0
PATCH v2 2/2 arm64: dts: qcom: ipq8074: pass QMP PCI PHY PIPE clocks to GCC
Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to find them by matching globaly by name.
If not passed directly, driver maintains backwards compatibility by then falling back to global lookup.
---
Changes in v2:
* Make clocks and clock-names one-per-line
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +8 -2
@@ -407,8 +407,14 @@ qpic_pins: qpic-state { gcc: gcc@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; - clocks = <&xo>, <&sleep_clk>; - clock-names = "xo", "sleep_clk"; + clocks = <&xo>, + <&sleep_clk>, + <&pcie_qmp0>, + <&pcie_qmp1>; + clock-names = "xo", + "sleep_clk", + "pcie0_pipe", + "pcie1_pipe"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>;
Signature · 1 line
2.41.0
Quoted 2 lines · Robert Marko
Allow passing QMP PCI PHY PIPE clocks to the IPQ8074 GCC to avoid having to do a global matching by name.
I would prefer commit msg refering to hardware, not driver. Basically the PCI PHY pipe clocks are inputs to the clock controller.
Best regards,
Krzysztof