Add simple Containerfile
PATCH v2 1/2 Add simple Containerfile
This adds a regular container (or Docker) file which builds LTP from source. This is initially intended for testing the LTP itself.
The resulting container has just the LTP installation and runtime dependencies. However it is still quite large, probably due to debug symbols.
The container can be built with a command like:
podman build -t tumbleweed/ltp \
--build-arg PREFIX=registry.opensuse.org/opensuse/ \
--build-arg DISTRO_NAME=tumbleweed \
--build-arg DISTRO_RELEASE=20230925 .Or just
podman build .
which will create an Alpine container.
It contains Kirk in /opt/kirk. So
cd /opt/kirk && ./kirk -f ltp -r syscalls
will run some tests.
Note a much smaller container can be found at:
https://registry.opensuse.org/cgi-bin/cooverview?srch_term=project%3D%5Ebenchmark+container%3D.*
This is created with SUSE's build system which does not use container files
---
V2:
* Added some docs. I didn't say too much because I think we are likely to invalidate all of this info as we start testing in containers.
.dockerignore | 1 + Containerfile | 32 ++++++++++++++++++++++++++++++++ README.md | 31 +++++++++++++++++++++++++++++++ ci/alpine-runtime.sh | 16 ++++++++++++++++ ci/tumbleweed-runtime.sh | 13 +++++++++++++ 5 files changed, 93 insertions(+) create mode 100644 .dockerignore create mode 100644 Containerfile create mode 100755 ci/alpine-runtime.sh create mode 100755 ci/tumbleweed-runtime.sh
.dockerignore new file +1 -0
@@ -0,0 +1 @@ +Containerfile
Containerfile new file +32 -0
@@ -0,0 +1,32 @@ +ARG PREFIX=docker.io/ +ARG DISTRO_NAME=alpine +ARG DISTRO_RELEASE=3.18 + +FROM $PREFIX$DISTRO_NAME:$DISTRO_RELEASE AS build +ARG LTPROOT=/opt/ltp +ARG DISTRO_NAME=alpine +ARG DISTRO_RELEASE=3.18 + +RUN mkdir /build +WORKDIR /build +COPY . /build +RUN ./ci/${DISTRO_NAME}.sh +RUN git clean -fdX +RUN ./build.sh -p $LTPROOT -i + +FROM $PREFIX$DISTRO_NAME:$DISTRO_RELEASE +ARG LTPROOT=/opt/ltp +ARG KIRKROOT=/opt/kirk +ARG DISTRO_NAME=alpine + +COPY --from=build /build/ci/${DISTRO_NAME}-runtime.sh $LTPROOT/runtime-deps.sh +RUN $LTPROOT/runtime-deps.sh + +COPY --from=build $LTPROOT $LTPROOT +ENV LTPROOT=$LTPROOT +ENV PATH=$LTPROOT/testcases/bin:$LTPROOT/bin:$PATH + +RUN mkdir -p $KIRKROOT +COPY --from=build /build/tools/kirk $KIRKROOT + +USER ltp
README.md +31 -0
@@ -184,6 +184,37 @@ Network tests Network tests require certain setup, described in `testcases/network/README.md` (online at https://github.com/linux-test-project/ltp/tree/master/testcases/network). +Containers +---------- + +*Presently running the LTP inside a container is not a shortcut. It +will make things much harder for you.* + +There is a Containerfile which can be used with Docker or +Podman. Currently it can build Alpine and OpenSUSE images. + +The container can be built with a command like: + +``` +$ podman build -t tumbleweed/ltp \ + --build-arg PREFIX=registry.opensuse.org/opensuse/ \ + --build-arg DISTRO_NAME=tumbleweed \ + --build-arg DISTRO_RELEASE=20230925 . +``` + +Or just `podman build .` which will create an Alpine container. + +It contains Kirk in /opt/kirk. So the following will run some tests. + +``` +$ podman run -it --rm tumbleweed/ltp:latest +$ cd /opt/kirk && ./kirk -f ltp -r syscalls +``` + +SUSE also publishes a +[smaller LTP container](https://registry.opensuse.org/cgi-bin/cooverview?srch_term=project%3D%5Ebenchmark+container%3D.*) +that is not based on the Containerfile. + Developers corner =================
ci/alpine-runtime.sh new file +16 -0
@@ -0,0 +1,16 @@ +#!/bin/sh -eux + +apk add \ + acl \ + keyutils \ + libaio \ + libacl \ + libcap \ + libselinux \ + libsepol \ + libtirpc \ + numactl \ + openssl \ + py3-msgpack + +adduser -D -g "Unprivileged LTP user" ltp
ci/tumbleweed-runtime.sh new file +13 -0
@@ -0,0 +1,13 @@ +#!/bin/sh -eux + +zyp="zypper --non-interactive install --force-resolution --no-recommends" + +$zyp \ + iproute2 \ + keyutils \ + libaio1 \ + libmnl0 \ + libnuma1 \ + libtirpc3 + +useradd ltp
Signature · 5 lines
2.40.1 -- Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH v2 2/2 ci: Check for undefined variables in all scripts
--- ci/alpine.sh | 3 +-- ci/debian.cross-compile.sh | 3 +-- ci/debian.i386.sh | 3 +-- ci/debian.minimal.sh | 3 +-- ci/debian.sh | 3 +-- ci/fedora.sh | 3 +-- ci/tumbleweed.sh | 3 +-- 7 files changed, 7 insertions(+), 14 deletions(-)
ci/alpine.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2019-2022 Petr Vorel <[email protected]> -set -ex apk update
ci/debian.cross-compile.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2018-2020 Petr Vorel <[email protected]> -set -ex if [ -z "$ARCH" ]; then echo "missing \$ARCH!" >&2
ci/debian.i386.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2018-2020 Petr Vorel <[email protected]> -set -ex dpkg --add-architecture i386 apt update
ci/debian.minimal.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2018-2023 Petr Vorel <[email protected]> -set -ex apt="apt remove -y"
ci/debian.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2018-2021 Petr Vorel <[email protected]> -set -ex # workaround for missing oldstable-updates repository # W: Failed to fetch http://deb.debian.org/debian/dists/oldstable-updates/main/binary-amd64/Packages
ci/fedora.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2018-2021 Petr Vorel <[email protected]> -set -ex yum="yum -y install --skip-broken"
ci/tumbleweed.sh +1 -2
@@ -1,6 +1,5 @@ -#!/bin/sh +#!/bin/sh -eux # Copyright (c) 2018-2021 Petr Vorel <[email protected]> -set -ex zyp="zypper --non-interactive install --force-resolution --no-recommends"
Signature · 5 lines
2.40.1 -- Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH v2 2/2] ci: Check for undefined variables in all scripts
Hi Richie,
Thank you!
Could you please before you commit also add license to the files:
# SPDX-License-Identifier: GPL-2.0-or-later
And maybe your/LTP copyright (whatever you prefer) into files you added?
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH v2 2/2] ci: Check for undefined variables in all scripts
Hello,
Updated with suggested changes and pushed, thanks!
Quoted 14 lines · Petr Vorel
Hi Richie,
Reviewed-by Petr Vorel <[email protected]>Thank you!
Could you please before you commit also add license to the files:
# SPDX-License-Identifier: GPL-2.0-or-laterAnd maybe your/LTP copyright (whatever you prefer) into files you added?
Kind regards,
Petr
Signature · 5 lines
Thank you, Richard. -- Mailing list info: https://lists.linux.it/listinfo/ltp
Hi Richie,
Thanks for adding readme!
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp