Skip to contentSkip to conversation

Add simple Containerfile

PATCH In review Richard Palethorpe via ltp 3 participants 5 messages Oct 9, 2023 – Oct 10, 2023

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 Add simple Containerfile

This adds a regular container (or Docker) file which builds LTP from source. This is initially intended for testing the LTP itself.

The resulting container has just the LTP installation and runtime dependencies. However it is still quite large, probably due to debug symbols.

The container can be built with a command like:

podman build -t tumbleweed/ltp \
       --build-arg PREFIX=registry.opensuse.org/opensuse/ \
       --build-arg DISTRO_NAME=tumbleweed \
       --build-arg DISTRO_RELEASE=20230925 .

Or just

podman build .

which will create an Alpine container.

It contains Kirk in /opt/kirk. So

cd /opt/kirk && ./kirk -f ltp -r syscalls

will run some tests.

Note a much smaller container can be found at:
https://registry.opensuse.org/cgi-bin/cooverview?srch_term=project%3D%5Ebenchmark+container%3D.*
This is created with SUSE's build system which does not use container files

Cc Petr Vorel <[email protected]>
Cc Marius Kittler <[email protected]>

---

V2:

* Added some docs. I didn't say too much because I think we are likely to invalidate all of this info as we start testing in containers.

 .dockerignore            |  1 +
 Containerfile            | 32 ++++++++++++++++++++++++++++++++
 README.md                | 31 +++++++++++++++++++++++++++++++
 ci/alpine-runtime.sh     | 16 ++++++++++++++++
 ci/tumbleweed-runtime.sh | 13 +++++++++++++
 5 files changed, 93 insertions(+)
 create mode 100644 .dockerignore
 create mode 100644 Containerfile
 create mode 100755 ci/alpine-runtime.sh
 create mode 100755 ci/tumbleweed-runtime.sh
.dockerignore new file +1 -0
new file mode 100644
index 000000000..bbcd7072f
@@ -0,0 +1 @@
+Containerfile
Containerfile new file +32 -0
new file mode 100644
index 000000000..2f8192c3b
@@ -0,0 +1,32 @@
+ARG PREFIX=docker.io/
+ARG DISTRO_NAME=alpine
+ARG DISTRO_RELEASE=3.18
+
+FROM $PREFIX$DISTRO_NAME:$DISTRO_RELEASE AS build
+ARG LTPROOT=/opt/ltp
+ARG DISTRO_NAME=alpine
+ARG DISTRO_RELEASE=3.18
+
+RUN mkdir /build
+WORKDIR /build
+COPY . /build
+RUN ./ci/${DISTRO_NAME}.sh
+RUN git clean -fdX
+RUN ./build.sh -p $LTPROOT -i
+
+FROM $PREFIX$DISTRO_NAME:$DISTRO_RELEASE
+ARG LTPROOT=/opt/ltp
+ARG KIRKROOT=/opt/kirk
+ARG DISTRO_NAME=alpine
+
+COPY --from=build /build/ci/${DISTRO_NAME}-runtime.sh $LTPROOT/runtime-deps.sh
+RUN $LTPROOT/runtime-deps.sh
+
+COPY --from=build $LTPROOT $LTPROOT
+ENV LTPROOT=$LTPROOT
+ENV PATH=$LTPROOT/testcases/bin:$LTPROOT/bin:$PATH
+
+RUN mkdir -p $KIRKROOT
+COPY --from=build /build/tools/kirk $KIRKROOT
+
+USER ltp
README.md +31 -0
index a0813b0a1..fa9559398 100644
@@ -184,6 +184,37 @@ Network tests
 Network tests require certain setup, described in `testcases/network/README.md`
 (online at https://github.com/linux-test-project/ltp/tree/master/testcases/network).
 
+Containers
+----------
+
+*Presently running the LTP inside a container is not a shortcut. It
+will make things much harder for you.*
+
+There is a Containerfile which can be used with Docker or
+Podman. Currently it can build Alpine and OpenSUSE images.
+
+The container can be built with a command like:
+
+```
+$ podman build -t tumbleweed/ltp \
+       --build-arg PREFIX=registry.opensuse.org/opensuse/ \
+       --build-arg DISTRO_NAME=tumbleweed \
+       --build-arg DISTRO_RELEASE=20230925 .
+```
+
+Or just `podman build .` which will create an Alpine container.
+
+It contains Kirk in /opt/kirk. So the following will run some tests.
+
+```
+$ podman run -it --rm tumbleweed/ltp:latest
+$ cd /opt/kirk && ./kirk -f ltp -r syscalls
+```
+
+SUSE also publishes a
+[smaller LTP container](https://registry.opensuse.org/cgi-bin/cooverview?srch_term=project%3D%5Ebenchmark+container%3D.*)
+that is not based on the Containerfile.
+
 Developers corner
 =================
 
ci/alpine-runtime.sh new file +16 -0
new file mode 100755
index 000000000..e4941f329
@@ -0,0 +1,16 @@
+#!/bin/sh -eux
+
+apk add \
+        acl \
+        keyutils \
+        libaio \
+        libacl \
+        libcap \
+        libselinux \
+        libsepol \
+        libtirpc \
+        numactl \
+        openssl \
+        py3-msgpack
+
+adduser -D -g "Unprivileged LTP user" ltp
ci/tumbleweed-runtime.sh new file +13 -0
new file mode 100755
index 000000000..5207988e7
@@ -0,0 +1,13 @@
+#!/bin/sh -eux
+
+zyp="zypper --non-interactive install --force-resolution --no-recommends"
+
+$zyp \
+	iproute2 \
+	keyutils \
+	libaio1 \
+	libmnl0 \
+	libnuma1 \
+	libtirpc3
+
+useradd ltp
Signature · 5 lines
2.40.1


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#1 lore raw

PATCH v2 2/2 ci: Check for undefined variables in all scripts

---
 ci/alpine.sh               | 3 +--
 ci/debian.cross-compile.sh | 3 +--
 ci/debian.i386.sh          | 3 +--
 ci/debian.minimal.sh       | 3 +--
 ci/debian.sh               | 3 +--
 ci/fedora.sh               | 3 +--
 ci/tumbleweed.sh           | 3 +--
 7 files changed, 7 insertions(+), 14 deletions(-)
ci/alpine.sh +1 -2
index 9ae5a8d07..efd1f6de4 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2019-2022 Petr Vorel <[email protected]>
-set -ex
 
 apk update
 
ci/debian.cross-compile.sh +1 -2
index 0a7ef7710..e2dea2ee0 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2018-2020 Petr Vorel <[email protected]>
-set -ex
 
 if [ -z "$ARCH" ]; then
 	echo "missing \$ARCH!" >&2
ci/debian.i386.sh +1 -2
index 707a23ca6..e6017de65 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2018-2020 Petr Vorel <[email protected]>
-set -ex
 
 dpkg --add-architecture i386
 apt update
ci/debian.minimal.sh +1 -2
index b51154b05..780258676 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2018-2023 Petr Vorel <[email protected]>
-set -ex
 
 apt="apt remove -y"
 
ci/debian.sh +1 -2
index da92337fb..6d0c9eb13 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2018-2021 Petr Vorel <[email protected]>
-set -ex
 
 # workaround for missing oldstable-updates repository
 # W: Failed to fetch http://deb.debian.org/debian/dists/oldstable-updates/main/binary-amd64/Packages
ci/fedora.sh +1 -2
index a603bcbe3..2e4e87bca 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2018-2021 Petr Vorel <[email protected]>
-set -ex
 
 yum="yum -y install --skip-broken"
 
ci/tumbleweed.sh +1 -2
index f1e7252f2..2e2b05aa5 100755
@@ -1,6 +1,5 @@
-#!/bin/sh
+#!/bin/sh -eux
 # Copyright (c) 2018-2021 Petr Vorel <[email protected]>
-set -ex
 
 zyp="zypper --non-interactive install --force-resolution --no-recommends"
 
Signature · 5 lines
2.40.1


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
Reviewed-by on v2 2/2
#2 lore raw

Re: [LTP] [PATCH v2 2/2] ci: Check for undefined variables in all scripts

Hi Richie,

Thank you!

Could you please before you commit also add license to the files:
# SPDX-License-Identifier: GPL-2.0-or-later

And maybe your/LTP copyright (whatever you prefer) into files you added?

Kind regards,
Petr

Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
#3 lore raw

Re: [LTP] [PATCH v2 2/2] ci: Check for undefined variables in all scripts

Hello,

Updated with suggested changes and pushed, thanks!

Quoted 14 lines · Petr Vorel

Hi Richie,

Thank you!

Could you please before you commit also add license to the files:
# SPDX-License-Identifier: GPL-2.0-or-later

And maybe your/LTP copyright (whatever you prefer) into files you added?

Kind regards,
Petr

Signature · 5 lines
Thank you,
Richard.

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp