Skip to contentSkip to conversation

arm64: dts: qcom: ipq6018: use CPUFreq NVMEM

PATCH Applied Robert Marko 2 participants 2 messages Oct 21, 2023 – Dec 3, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm64: dts: qcom: ipq6018: use CPUFreq NVMEM

IPQ6018 comes in multiple SKU-s and some of them dont support all of the OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only supported OPP-s based on the SoC dynamically.

As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only goes up to 1.5GHz and is marked as such via an eFuse.

---
Changes in v2:
* Use minus instead of underscore for fuse node name
* Drop driver code as it was merged

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/ipq6018.dtsi +13 -1
index 9aec89d5e095b..eebd8afe0efce 100644
@@ -96,42 +96,49 @@ scm {
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -314,6 +321,11 @@ qfprom: efuse@a4000 {
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
Signature · 1 line
2.41.0
maintainer Applied
#1 lore raw
Quoted 8 lines · Robert Marko

IPQ6018 comes in multiple SKU-s and some of them dont support all of the OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only supported OPP-s based on the SoC dynamically.

As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only goes up to 1.5GHz and is marked as such via an eFuse.

[...]

Applied, thanks!

[1/1] arm64: dts: qcom: ipq6018: use CPUFreq NVMEM

      commit: 83afcf14edb9217e58837eb119da96d734a4b3b1

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>