arm64: dts: qcom: ipq6018: use CPUFreq NVMEM
PATCH v2 1/1 arm64: dts: qcom: ipq6018: use CPUFreq NVMEM
IPQ6018 comes in multiple SKU-s and some of them dont support all of the OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only supported OPP-s based on the SoC dynamically.
As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only goes up to 1.5GHz and is marked as such via an eFuse.
---
Changes in v2:
* Use minus instead of underscore for fuse node name
* Drop driver code as it was merged
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/ipq6018.dtsi +13 -1
@@ -96,42 +96,49 @@ scm { }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&cpu_speed_bin>; opp-shared; opp-864000000 { opp-hz = /bits/ 64 <864000000>; opp-microvolt = <725000>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-microvolt = <787500>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1320000000 { opp-hz = /bits/ 64 <1320000000>; opp-microvolt = <862500>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-microvolt = <925000>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; opp-1608000000 { opp-hz = /bits/ 64 <1608000000>; opp-microvolt = <987500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1062500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; };
@@ -314,6 +321,11 @@ qfprom: efuse@a4000 { reg = <0x0 0x000a4000 0x0 0x2000>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@135 { + reg = <0x135 0x1>; + bits = <7 1>; + }; }; prng: qrng@e3000 {
Signature · 1 line
2.41.0
Quoted 8 lines · Robert Marko
IPQ6018 comes in multiple SKU-s and some of them dont support all of the OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only supported OPP-s based on the SoC dynamically.
As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only goes up to 1.5GHz and is marked as such via an eFuse.
[...]
Applied, thanks!
[1/1] arm64: dts: qcom: ipq6018: use CPUFreq NVMEM
commit: 83afcf14edb9217e58837eb119da96d734a4b3b1
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>