board: toradex: verdin-imx8mp: enable usb device and fastboot support
PATCH 1/1 board: toradex: verdin-imx8mp: enable usb device and fastboot support
From: Marcel Ziswiler <[email protected]>
Enable USB device and fastboot support which may be used to load the Toradex Easy Installer FIT image.
While at it also enable USB mass storage aka UMS support.
Note that the i.MX 8M Plus recovery mode support is based on the USB boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial downloader support.
---
configs/verdin-imx8mp_defconfig | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
configs/verdin-imx8mp_defconfig +15 -1
@@ -79,6 +79,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_READ=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y
@@ -108,6 +109,12 @@ CONFIG_BOOTCOUNT_ENV=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_CLK_IMX8MP=y CONFIG_FSL_CAAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x42800000 +CONFIG_FASTBOOT_BUF_SIZE=0x40000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_GPIO_HOG=y CONFIG_SPL_GPIO_HOG=y CONFIG_MXC_GPIO=y
@@ -138,6 +145,7 @@ CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_PHY=y CONFIG_PHY_IMX8MQ_USB=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y
@@ -160,14 +168,20 @@ CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y CONFIG_IMX_TMU=y CONFIG_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y CONFIG_USB_EHCI_HCD=y -CONFIG_MXC_USB_OTG_HACTIVE=y +# CONFIG_USB_EHCI_MX7 is not set CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_KEYBOARD=y CONFIG_USB_HOST_ETHER=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Toradex" +CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 +CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 CONFIG_IMX_WATCHDOG=y CONFIG_HEXDUMP=y
Signature · 1 line
2.36.1
Hi Marcel,
Quoted 6 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Enable USB device and fastboot support which may be used to load the Toradex Easy Installer FIT image.
Quoted 7 lines
While at it also enable USB mass storage aka UMS support.
Note that the i.MX 8M Plus recovery mode support is based on the USB boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial downloader support.
Signed-off-by Marcel Ziswiler <[email protected]>
Hi Stefano
Maybe you missed that one (i.MX 8M Plus vs. Mini)? Thanks!
Cheers
Marcel
Quoted 18 lines · Fabio Estevam
Hi Marcel,
Quoted 6 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Enable USB device and fastboot support which may be used to load the Toradex Easy Installer FIT image.
Quoted 7 lines
While at it also enable USB mass storage aka UMS support.
Note that the i.MX 8M Plus recovery mode support is based on the USB boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial downloader support.
Signed-off-by Marcel Ziswiler <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Quoted 5 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Enable USB device and fastboot support which may be used to load the Toradex Easy Installer FIT image.
Quoted 8 lines
While at it also enable USB mass storage aka UMS support.
Note that the i.MX 8M Plus recovery mode support is based on the USB boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial downloader support.
Signed-off-by Marcel Ziswiler <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom