Skip to contentSkip to conversation

s390x: Add support for running guests without MSO/MSL

PATCH In review Nico Boehr 3 participants 12 messages Nov 6, 2023 – Nov 7, 2023

Subsystems (2)
lore
Share & tools
lore

Nico Boehr

author
#0 lore raw

v8 cover s390x: Add support for running guests without MSO/MSL

v8:
---
* pick up several r-bs
* fix kerneldoc style (thanks Claudio)
* assert no pgm int code is there before entering SIE (thanks Janosch)
* do not reference future commit (thanks Janosch)
* check fauling address in TEID (thanks Claudio)
* test_page -> test_pages (thanks Claudio)
* add memory barriers (thanks Heiko)

v7:
---
* pick up r-bs
* fixup unneeded linebreak (thanks Janosch)
* remove outdated comments (thanks Janosch)
* remove unneeded includes (thanks Janosch)

v6:
---
* add commit "s390x: add test source dir to include paths" and share define with number of pages between snippet and test (Thomas)
* add commit "lib: s390x: interrupt: remove TEID_ASCE defines"
* rename dat -> use_dat (thanks Thomas)
* remove IRQ_DAT_ON/_OFF defines (thanks Thomas)
* add a comment to explain why we switch to home space when entering SIE (thanks Thomas)
* clarify register_ext_cleanup_func() doesn't touch address space mode when DAT is off (thanks Thomas)
* convert address space defines to enum (thanks Thomas)
* switch bitfield member to uint64_t (thanks Claudio)
* upercase hex number
* in selftest, set the bitfield value to a define and then assert on the bitfield (thanks Thomas)

v5:
---
* fix a big oopsie in irq_set_dat_mode() which caused parts of lowcore being overwritten (thanks Claudio)

v4:
---
- add static assert for PSW bitfield (Janosch, Claudio)
- remove unneeded includes (Janosch)
- move variable decls to function start (Janosch)
- remove unneeded imports (Janosch)
- lowerocase hex (Janosch)
- remove unneeded attr (Janosch)
- tyop :-) fixes (Janosch)

v3:
---
* introduce bitfield for the PSW to make handling less clumsy
* some variable renames (Claudio)
* remove unneeded barriers (Claudio)
* remove rebase leftover sie_had_pgm_int (Claudio)
* move read_pgm_int_code to header (Claudio)
* squash include fix commit into the one causing the issue (Claudio)

v2:
---
* add function to change DAT/AS mode for all irq handlers (Janosch, Claudio)
* instead of a new flag in PROG0C, check the pgm int code in lowcore (Janosch)
* fix indents, comments (Nina)

Right now, all SIE tests in kvm-unit-tests (i.e. where kvm-unit-test is the hypervisor) run using MSO/MSL.

This is convenient, because it's simple. But it also comes with disadvantages, for example some features are unavailabe with MSO/MSL.

This series adds support for running guests without MSO/MSL with dedicated guest page tables for the GPA->HPA translation.

Since SIE implicitly uses the primary space mode for the guest, the host can't run in the primary space mode, too. To avoid moving all tests to the home space mode, only switch to home space mode when it is actually needed.

This series also comes with various bugfixes that were caught while develoing this.

Nico Boehr (8):
lib: s390x: introduce bitfield for PSW mask
s390x: add function to set DAT mode for all interrupts
s390x: sie: switch to home space mode before entering SIE
s390x: lib: don't forward PSW when handling exception in SIE
s390x: lib: sie: don't reenter SIE on pgm int
s390x: add test source dir to include paths
s390x: add a test for SIE without MSO/MSL
lib: s390x: interrupt: remove TEID_ASCE defines

 lib/s390x/asm/arch_def.h   |  36 ++++++++++--
 lib/s390x/asm/interrupt.h  |  21 +++++--
 lib/s390x/asm/mem.h        |   1 +
 lib/s390x/interrupt.c      |  36 ++++++++++++
 lib/s390x/mmu.c            |   5 +-
 lib/s390x/sie.c            |  33 ++++++++++-
 s390x/Makefile             |   4 +-
 s390x/selftest.c           |  34 ++++++++++++
 s390x/sie-dat.c            | 111 +++++++++++++++++++++++++++++++++++++
 s390x/snippets/c/sie-dat.c |  57 +++++++++++++++++++
 s390x/snippets/c/sie-dat.h |   2 +
 s390x/unittests.cfg        |   3 +
 12 files changed, 329 insertions(+), 14 deletions(-)
 create mode 100644 s390x/sie-dat.c
 create mode 100644 s390x/snippets/c/sie-dat.c
 create mode 100644 s390x/snippets/c/sie-dat.h
Signature · 1 line
2.41.0
author
#1 lore raw

PATCH v8 1/8 lib: s390x: introduce bitfield for PSW mask

Changing the PSW mask is currently little clumsy, since there is only the PSW_MASK_* defines. This makes it hard to change e.g. only the address space in the current PSW without a lot of bit fiddling.

Introduce a bitfield for the PSW mask. This makes this kind of modifications much simpler and easier to read.

---
 lib/s390x/asm/arch_def.h | 25 ++++++++++++++++++++++++-
 s390x/selftest.c         | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+), 1 deletion(-)
lib/s390x/asm/arch_def.h +24 -1
index bb26e008cc68..f629b6d0a17f 100644
@@ -37,9 +37,32 @@ struct stack_frame_int {
 };
 
 struct psw {
-	uint64_t	mask;
+	union {
+		uint64_t	mask;
+		struct {
+			uint64_t reserved00:1;
+			uint64_t per:1;
+			uint64_t reserved02:3;
+			uint64_t dat:1;
+			uint64_t io:1;
+			uint64_t ext:1;
+			uint64_t key:4;
+			uint64_t reserved12:1;
+			uint64_t mchk:1;
+			uint64_t wait:1;
+			uint64_t pstate:1;
+			uint64_t as:2;
+			uint64_t cc:2;
+			uint64_t prg_mask:4;
+			uint64_t reserved24:7;
+			uint64_t ea:1;
+			uint64_t ba:1;
+			uint64_t reserved33:31;
+		};
+	};
 	uint64_t	addr;
 };
+_Static_assert(sizeof(struct psw) == 16, "PSW size");
 
 #define PSW(m, a) ((struct psw){ .mask = (m), .addr = (uint64_t)(a) })
 
s390x/selftest.c +34 -0
index 13fd36bc06f8..92ed4e5d35eb 100644
@@ -74,6 +74,39 @@ static void test_malloc(void)
 	report_prefix_pop();
 }
 
+static void test_psw_mask(void)
+{
+	uint64_t expected_key = 0xf;
+	struct psw test_psw = PSW(0, 0);
+
+	report_prefix_push("PSW mask");
+	test_psw.mask = PSW_MASK_DAT;
+	report(test_psw.dat, "DAT matches expected=0x%016lx actual=0x%016lx", PSW_MASK_DAT, test_psw.mask);
+
+	test_psw.mask = PSW_MASK_IO;
+	report(test_psw.io, "IO matches expected=0x%016lx actual=0x%016lx", PSW_MASK_IO, test_psw.mask);
+
+	test_psw.mask = PSW_MASK_EXT;
+	report(test_psw.ext, "EXT matches expected=0x%016lx actual=0x%016lx", PSW_MASK_EXT, test_psw.mask);
+
+	test_psw.mask = expected_key << (63 - 11);
+	report(test_psw.key == expected_key, "PSW Key matches expected=0x%lx actual=0x%x", expected_key, test_psw.key);
+
+	test_psw.mask = 1UL << (63 - 13);
+	report(test_psw.mchk, "MCHK matches");
+
+	test_psw.mask = PSW_MASK_WAIT;
+	report(test_psw.wait, "Wait matches expected=0x%016lx actual=0x%016lx", PSW_MASK_WAIT, test_psw.mask);
+
+	test_psw.mask = PSW_MASK_PSTATE;
+	report(test_psw.pstate, "Pstate matches expected=0x%016lx actual=0x%016lx", PSW_MASK_PSTATE, test_psw.mask);
+
+	test_psw.mask = PSW_MASK_64;
+	report(test_psw.ea && test_psw.ba, "BA/EA matches expected=0x%016lx actual=0x%016lx", PSW_MASK_64, test_psw.mask);
+
+	report_prefix_pop();
+}
+
 int main(int argc, char**argv)
 {
 	report_prefix_push("selftest");
@@ -89,6 +122,7 @@ int main(int argc, char**argv)
 	test_fp();
 	test_pgm_int();
 	test_malloc();
+	test_psw_mask();
 
 	return report_summary();
 }
Signature · 1 line
2.41.0
author
#2 lore raw

PATCH v8 2/8 s390x: add function to set DAT mode for all interrupts

In reply to Nico Boehr

When toggling DAT or switch address space modes, it is likely that interrupts should be handled in the same DAT or address space mode.

Add a function which toggles DAT and address space mode for all interruptions, except restart interrupts.

---
 lib/s390x/asm/arch_def.h  | 10 ++++++----
 lib/s390x/asm/interrupt.h |  2 ++
 lib/s390x/interrupt.c     | 35 +++++++++++++++++++++++++++++++++++
 lib/s390x/mmu.c           |  5 +++--
 4 files changed, 46 insertions(+), 6 deletions(-)
lib/s390x/asm/arch_def.h +6 -4
index f629b6d0a17f..5beaf15b57e7 100644
@@ -84,10 +84,12 @@ struct cpu {
 	bool in_interrupt_handler;
 };
 
-#define AS_PRIM				0
-#define AS_ACCR				1
-#define AS_SECN				2
-#define AS_HOME				3
+enum address_space {
+	AS_PRIM = 0,
+	AS_ACCR = 1,
+	AS_SECN = 2,
+	AS_HOME = 3
+};
 
 #define PSW_MASK_DAT			0x0400000000000000UL
 #define PSW_MASK_IO			0x0200000000000000UL
lib/s390x/asm/interrupt.h +2 -0
index 35c1145f0349..d01f8a89641a 100644
@@ -83,6 +83,8 @@ void expect_ext_int(void);
 uint16_t clear_pgm_int(void);
 void check_pgm_int_code(uint16_t code);
 
+void irq_set_dat_mode(bool use_dat, enum address_space as);
+
 /* Activate low-address protection */
 static inline void low_prot_enable(void)
 {
lib/s390x/interrupt.c +35 -0
index 3f993a363ae2..e990c1863630 100644
@@ -9,6 +9,7 @@
  */
 #include <libcflat.h>
 #include <asm/barrier.h>
+#include <asm/mem.h>
 #include <asm/asm-offsets.h>
 #include <sclp.h>
 #include <interrupt.h>
@@ -104,6 +105,40 @@ void register_ext_cleanup_func(void (*f)(struct stack_frame_int *))
 	THIS_CPU->ext_cleanup_func = f;
 }
 
+/**
+ * irq_set_dat_mode - Set the DAT mode of all interrupt handlers, except for
+ * restart.
+ * @use_dat: specifies whether to use DAT or not
+ * @as: specifies the address space mode to use. Not set if use_dat is false.
+ *
+ * This will update the DAT mode and address space mode of all interrupt new
+ * PSWs.
+ *
+ * Since enabling DAT needs initialized CRs and the restart new PSW is often used
+ * to initialize CRs, the restart new PSW is never touched to avoid the chicken
+ * and egg situation.
+ */
+void irq_set_dat_mode(bool use_dat, enum address_space as)
+{
+	struct psw* irq_psws[] = {
+		OPAQUE_PTR(GEN_LC_EXT_NEW_PSW),
+		OPAQUE_PTR(GEN_LC_SVC_NEW_PSW),
+		OPAQUE_PTR(GEN_LC_PGM_NEW_PSW),
+		OPAQUE_PTR(GEN_LC_MCCK_NEW_PSW),
+		OPAQUE_PTR(GEN_LC_IO_NEW_PSW),
+	};
+	struct psw *psw;
+
+	assert(as == AS_PRIM || as == AS_ACCR || as == AS_SECN || as == AS_HOME);
+
+	for (size_t i = 0; i < ARRAY_SIZE(irq_psws); i++) {
+		psw = irq_psws[i];
+		psw->dat = use_dat;
+		if (use_dat)
+			psw->as = as;
+	}
+}
+
 static void fixup_pgm_int(struct stack_frame_int *stack)
 {
 	/* If we have an error on SIE we directly move to sie_exit */
lib/s390x/mmu.c +3 -2
index b474d7021d3f..9a179d6b8ec5 100644
@@ -12,6 +12,7 @@
 #include <asm/pgtable.h>
 #include <asm/arch_def.h>
 #include <asm/barrier.h>
+#include <asm/interrupt.h>
 #include <vmalloc.h>
 #include "mmu.h"
 
@@ -41,8 +42,8 @@ static void mmu_enable(pgd_t *pgtable)
 	/* enable dat (primary == 0 set as default) */
 	enable_dat();
 
-	/* we can now also use DAT unconditionally in our PGM handler */
-	lowcore.pgm_new_psw.mask |= PSW_MASK_DAT;
+	/* we can now also use DAT in all interrupt handlers */
+	irq_set_dat_mode(true, AS_PRIM);
 }
 
 /*
Signature · 1 line
2.41.0
author
#3 lore raw

PATCH v8 3/8 s390x: sie: switch to home space mode before entering SIE

In reply to Nico Boehr

This is to prepare for running guests without MSO/MSL, which is currently not possible.

We already have code in sie64a to setup a guest primary ASCE before entering SIE, so we can in theory switch to the page tables which translate gpa to hpa.

But the host is running in primary space mode already, so changing the primary ASCE before entering SIE will also affect the host's code and data.

To make this switch useful, the host should run in a different address space mode. Hence, set up and change to home address space mode before installing the guest ASCE.

The home space ASCE is just copied over from the primary space ASCE, so no functional change is intended, also for tests that want to use MSO/MSL. If a test intends to use a different primary space ASCE, it can now just set the guest.asce in the save_area.

---
 lib/s390x/asm/arch_def.h |  1 +
 lib/s390x/sie.c          | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+)
lib/s390x/asm/arch_def.h +1 -0
index 5beaf15b57e7..745a33878de5 100644
@@ -92,6 +92,7 @@ enum address_space {
 };
 
 #define PSW_MASK_DAT			0x0400000000000000UL
+#define PSW_MASK_HOME			0x0000C00000000000UL
 #define PSW_MASK_IO			0x0200000000000000UL
 #define PSW_MASK_EXT			0x0100000000000000UL
 #define PSW_MASK_KEY			0x00F0000000000000UL
lib/s390x/sie.c +26 -0
index b44febdeaaac..7f4474555ff7 100644
@@ -52,6 +52,8 @@ void sie_handle_validity(struct vm *vm)
 
 void sie(struct vm *vm)
 {
+	uint64_t old_cr13;
+
 	if (vm->sblk->sdf == 2)
 		memcpy(vm->sblk->pv_grregs, vm->save_area.guest.grs,
 		       sizeof(vm->save_area.guest.grs));
@@ -59,6 +61,24 @@ void sie(struct vm *vm)
 	/* Reset icptcode so we don't trip over it below */
 	vm->sblk->icptcode = 0;
 
+	/*
+	 * Set up home address space to match primary space. Instead of running
+	 * in home space all the time, we switch every time in sie() because:
+	 * - tests that depend on running in primary space mode don't need to be
+	 *   touched
+	 * - it avoids regressions in tests
+	 * - switching every time makes it easier to extend this in the future,
+	 *   for example to allow tests to run in whatever space they want
+	 */
+	old_cr13 = stctg(13);
+	lctlg(13, stctg(1));
+
+	/* switch to home space so guest tables can be different from host */
+	psw_mask_set_bits(PSW_MASK_HOME);
+
+	/* also handle all interruptions in home space while in SIE */
+	irq_set_dat_mode(true, AS_HOME);
+
 	while (vm->sblk->icptcode == 0) {
 		sie64a(vm->sblk, &vm->save_area);
 		sie_handle_validity(vm);
@@ -66,6 +86,12 @@ void sie(struct vm *vm)
 	vm->save_area.guest.grs[14] = vm->sblk->gg14;
 	vm->save_area.guest.grs[15] = vm->sblk->gg15;
 
+	irq_set_dat_mode(true, AS_PRIM);
+	psw_mask_clear_bits(PSW_MASK_HOME);
+
+	/* restore the old CR 13 */
+	lctlg(13, old_cr13);
+
 	if (vm->sblk->sdf == 2)
 		memcpy(vm->save_area.guest.grs, vm->sblk->pv_grregs,
 		       sizeof(vm->save_area.guest.grs));
Signature · 1 line
2.41.0
author
#4 lore raw

PATCH v8 4/8 s390x: lib: don't forward PSW when handling exception in SIE

In reply to Nico Boehr

When we're handling a pgm int in SIE, we want to return to the SIE cleanup after handling the exception. That's why we set pgm_old_psw to the sie_exit label in fixup_pgm_int.

On nullifing pgm ints, fixup_pgm_int will also forward the old PSW such that we don't cause an pgm int again.

However, when we want to return to the sie_exit label, this is not needed (since we've manually set pgm_old_psw). Instead, forwarding the PSW might cause us to skip an instruction or end up in the middle of an instruction.

So, let's just skip the rest of the fixup in case we're inside SIE.

Note that we're intentionally not fixing up the PSW in the guest; that's best left to the test at hand by registering their own psw fixup.

---
 lib/s390x/interrupt.c | 1 +
 1 file changed, 1 insertion(+)
lib/s390x/interrupt.c +1 -0
index e990c1863630..f7843a8f01c6 100644
@@ -145,6 +145,7 @@ static void fixup_pgm_int(struct stack_frame_int *stack)
 	if (lowcore.pgm_old_psw.addr >= (uint64_t)&sie_entry &&
 	    lowcore.pgm_old_psw.addr <= (uint64_t)&sie_exit) {
 		lowcore.pgm_old_psw.addr = (uint64_t)&sie_exit;
+		return;
 	}
 
 	switch (lowcore.pgm_int_code) {
Signature · 1 line
2.41.0
author
#5 lore raw

PATCH v8 5/8 s390x: lib: sie: don't reenter SIE on pgm int

In reply to Nico Boehr

At the moment, when a PGM int occurs while in SIE, we will just reenter SIE after the interrupt handler was called.

This is because sie() has a loop which checks icptcode and re-enters SIE if it is zero.

However, this behaviour is quite undesirable for SIE tests, since it doesn't give the host the chance to assert on the PGM int. Instead, we will just re-enter SIE, on nullifing conditions even causing the exception again.

In sie(), check whether a pgm int code is set in lowcore. If it has, exit the loop so the test can react to the interrupt. Add a new function read_pgm_int_code() to obtain the interrupt code.

Note that this introduces a slight oddity with sie and pgm int in certain cases: If a PGM int occurs between a expect_pgm_int() and sie(), we will now never enter SIE until the pgm_int_code is cleared by e.g. clear_pgm_int().

Also add missing include of facility.h to mem.h.

---
 lib/s390x/asm/interrupt.h | 14 ++++++++++++++
 lib/s390x/asm/mem.h       |  1 +
 lib/s390x/sie.c           |  7 ++++++-
 3 files changed, 21 insertions(+), 1 deletion(-)
lib/s390x/asm/interrupt.h +14 -0
index d01f8a89641a..39b43b64ea07 100644
@@ -97,4 +97,18 @@ static inline void low_prot_disable(void)
 	ctl_clear_bit(0, CTL0_LOW_ADDR_PROT);
 }
 
+/**
+ * read_pgm_int_code - Get the program interruption code of the last pgm int
+ * on the current CPU.
+ *
+ * This is similar to clear_pgm_int(), except that it doesn't clear the
+ * interruption information from lowcore.
+ *
+ * Return: 0 when none occurred.
+ */
+static inline uint16_t read_pgm_int_code(void)
+{
+	return lowcore.pgm_int_code;
+}
+
 #endif
lib/s390x/asm/mem.h +1 -0
index 64ef59b546a4..94d58c34f53f 100644
@@ -8,6 +8,7 @@
 #ifndef _ASMS390X_MEM_H_
 #define _ASMS390X_MEM_H_
 #include <asm/arch_def.h>
+#include <asm/facility.h>
 
 /* create pointer while avoiding compiler warnings */
 #define OPAQUE_PTR(x) ((void *)(((uint64_t)&lowcore) + (x)))
lib/s390x/sie.c +6 -1
index 7f4474555ff7..2530ff09ddcd 100644
@@ -13,6 +13,7 @@
 #include <libcflat.h>
 #include <sie.h>
 #include <asm/page.h>
+#include <asm/interrupt.h>
 #include <libcflat.h>
 #include <alloc_page.h>
 
@@ -54,6 +55,9 @@ void sie(struct vm *vm)
 {
 	uint64_t old_cr13;
 
+	/* When a pgm int code is set, we'll never enter SIE below. */
+	assert(!read_pgm_int_code());
+
 	if (vm->sblk->sdf == 2)
 		memcpy(vm->sblk->pv_grregs, vm->save_area.guest.grs,
 		       sizeof(vm->save_area.guest.grs));
@@ -79,7 +83,8 @@ void sie(struct vm *vm)
 	/* also handle all interruptions in home space while in SIE */
 	irq_set_dat_mode(true, AS_HOME);
 
-	while (vm->sblk->icptcode == 0) {
+	/* leave SIE when we have an intercept or an interrupt so the test can react to it */
+	while (vm->sblk->icptcode == 0 && !read_pgm_int_code()) {
 		sie64a(vm->sblk, &vm->save_area);
 		sie_handle_validity(vm);
 	}
Signature · 1 line
2.41.0
Reviewed-by on v8 5/8
#6 lore raw

Re: [kvm-unit-tests PATCH v8 5/8] s390x: lib: sie: don't reenter SIE on pgm int

Quoted 20 lines · Nico Boehr

At the moment, when a PGM int occurs while in SIE, we will just reenter SIE after the interrupt handler was called.

This is because sie() has a loop which checks icptcode and re-enters SIE if it is zero.

However, this behaviour is quite undesirable for SIE tests, since it doesn't give the host the chance to assert on the PGM int. Instead, we will just re-enter SIE, on nullifing conditions even causing the exception again.

In sie(), check whether a pgm int code is set in lowcore. If it has, exit the loop so the test can react to the interrupt. Add a new function read_pgm_int_code() to obtain the interrupt code.

Note that this introduces a slight oddity with sie and pgm int in certain cases: If a PGM int occurs between a expect_pgm_int() and sie(), we will now never enter SIE until the pgm_int_code is cleared by e.g. clear_pgm_int().

Quoted 5 lines

Also add missing include of facility.h to mem.h.

author
#7 lore raw

PATCH v8 6/8 s390x: add test source dir to include paths

In reply to Nico Boehr

Sometimes, it is useful to share some defines between a snippet and a test. By adding the source directory to include paths, header files can be placed in the snippet directory and included from the test (or vice versa).

This is a prerequisite for future tests.

---
 s390x/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
s390x/Makefile +1 -1
index 6e967194ae0d..947a4344738f 100644
@@ -67,7 +67,7 @@ test_cases: $(tests)
 test_cases_binary: $(tests_binary)
 test_cases_pv: $(tests_pv_binary)
 
-INCLUDE_PATHS = $(SRCDIR)/lib $(SRCDIR)/lib/s390x
+INCLUDE_PATHS = $(SRCDIR)/lib $(SRCDIR)/lib/s390x $(SRCDIR)/s390x
 # Include generated header files (e.g. in case of out-of-source builds)
 INCLUDE_PATHS += lib
 CPPFLAGS = $(addprefix -I,$(INCLUDE_PATHS))
Signature · 1 line
2.41.0
author
#8 lore raw

PATCH v8 7/8 s390x: add a test for SIE without MSO/MSL

In reply to Nico Boehr

Since we now have the ability to run guests without MSO/MSL, add a test to make sure this doesn't break.

---
 s390x/Makefile             |   2 +
 s390x/sie-dat.c            | 111 +++++++++++++++++++++++++++++++++++++
 s390x/snippets/c/sie-dat.c |  57 +++++++++++++++++++
 s390x/snippets/c/sie-dat.h |   2 +
 s390x/unittests.cfg        |   3 +
 5 files changed, 175 insertions(+)
 create mode 100644 s390x/sie-dat.c
 create mode 100644 s390x/snippets/c/sie-dat.c
 create mode 100644 s390x/snippets/c/sie-dat.h
s390x/Makefile +2 -0
index 947a4344738f..f79fd0098312 100644
@@ -41,6 +41,7 @@ tests += $(TEST_DIR)/migration-sck.elf
 tests += $(TEST_DIR)/exittime.elf
 tests += $(TEST_DIR)/ex.elf
 tests += $(TEST_DIR)/topology.elf
+tests += $(TEST_DIR)/sie-dat.elf
 
 pv-tests += $(TEST_DIR)/pv-diags.elf
 pv-tests += $(TEST_DIR)/pv-icptcode.elf
@@ -123,6 +124,7 @@ snippet_lib = $(snippet_asmlib) lib/auxinfo.o
 # perquisites (=guests) for the snippet hosts.
 # $(TEST_DIR)/<snippet-host>.elf: snippets = $(SNIPPET_DIR)/<c/asm>/<snippet>.gbin
 $(TEST_DIR)/mvpg-sie.elf: snippets = $(SNIPPET_DIR)/c/mvpg-snippet.gbin
+$(TEST_DIR)/sie-dat.elf: snippets = $(SNIPPET_DIR)/c/sie-dat.gbin
 $(TEST_DIR)/spec_ex-sie.elf: snippets = $(SNIPPET_DIR)/c/spec_ex.gbin
 
 $(TEST_DIR)/pv-diags.elf: pv-snippets += $(SNIPPET_DIR)/asm/pv-diag-yield.gbin
s390x/sie-dat.c new file +111 -0

111 lines not on this page · raw message

s390x/snippets/c/sie-dat.c new file +57 -0

57 lines not on this page · raw message

s390x/snippets/c/sie-dat.h new file +2 -0
new file mode 100644
index 000000000000..ed3f99f75f9c
@@ -0,0 +1,2 @@
+#define GUEST_TEST_PAGE_COUNT 10
+#define GUEST_TOTAL_PAGE_COUNT 256
s390x/unittests.cfg +3 -0
index 68e119e4fcaa..184658ff7d8d 100644
@@ -247,3 +247,6 @@ file = topology.elf
 [topology-2]
 file = topology.elf
 extra_params = -cpu max,ctop=on -smp sockets=31,cores=8,maxcpus=248  -append '-sockets 31 -cores 8'
+
+[sie-dat]
+file = sie-dat.elf
Signature · 1 line
2.41.0
author
#11 lore raw

PATCH v8 8/8 lib: s390x: interrupt: remove TEID_ASCE defines

In reply to Nico Boehr

These defines were - I can only guess - meant for the asce_id field. Since print_decode_teid() used AS_PRIM and friends instead, I see little benefit in keeping these around.

---
 lib/s390x/asm/interrupt.h | 5 -----
 1 file changed, 5 deletions(-)
lib/s390x/asm/interrupt.h +0 -5
index 39b43b64ea07..61d156d56b37 100644
@@ -13,11 +13,6 @@
 #define EXT_IRQ_EXTERNAL_CALL	0x1202
 #define EXT_IRQ_SERVICE_SIG	0x2401
 
-#define TEID_ASCE_PRIMARY	0
-#define TEID_ASCE_AR		1
-#define TEID_ASCE_SECONDARY	2
-#define TEID_ASCE_HOME		3
-
 union teid {
 	unsigned long val;
 	union {
Signature · 1 line
2.41.0