arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM
Subsystems (2)
PATCH 1/2 arm64: dts: mediatek: mt7986: drop "#clock-cells" from PWM
From: Rafał Miłecki <[email protected]>
PWM is not a clock provider and its binding doesn't specify "#clock-cells" property.
This fixes:arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: pwm@10048000: '#clock-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pwm/mediatek,mt2712-pwm.yaml#
--- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt7986a.dtsi +0 -1
@@ -196,7 +196,6 @@ pio: pinctrl@1001f000 { pwm: pwm@10048000 { compatible = "mediatek,mt7986-pwm"; reg = <0 0x10048000 0 0x1000>; - #clock-cells = <1>; #pwm-cells = <2>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_PWM_SEL>,
Signature · 1 line
2.35.3
PATCH 2/2 arm64: dts: mediatek: mt7986: add "#reset-cells" to infracfg
From: Rafał Miłecki <[email protected]>
MT7986's Infrastructure System Configuration Controller includes reset controller. It can reset blocks as specified in the include/dt-bindings/reset/mt7986-resets.h . Add #reset-cells so it can be referenced properly.
This fixes:arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: infracfg@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
--- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/mediatek/mt7986a.dtsi +1 -0
@@ -144,6 +144,7 @@ infracfg: infracfg@10001000 { compatible = "mediatek,mt7986-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; wed_pcie: wed-pcie@10003000 {
Signature · 1 line
2.35.3
Matthias Brugger
maintainerQuoted 5 lines · Rafał Miłecki
From: Rafał Miłecki <[email protected]>
PWM is not a clock provider and its binding doesn't specify "#clock-cells" property.
Quoted 7 lines
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: pwm@10048000: '#clock-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pwm/mediatek,mt2712-pwm.yaml#Fixes eabb04df46c6 ("arm64: dts: mt7986: add PWM")Cc Daniel Golle <[email protected]>Signed-off-by Rafał Miłecki <[email protected]>
Both patches applied, thanks!
Quoted 16 lines
--- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 - 1 file changed, 1 deletion(-)arch/arm64/boot/dts/mediatek/mt7986a.dtsi +0
-1@@ -196,7 +196,6 @@ pio: pinctrl@1001f000 { pwm: pwm@10048000 { compatible = "mediatek,mt7986-pwm"; reg = <0 0x10048000 0 0x1000>; - #clock-cells = <1>; #pwm-cells = <2>; interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_PWM_SEL>,