Skip to contentSkip to conversation

Set boot tags for the usb0 port of AM62x SK and Beagleplay

PATCH Applied Sjoerd Simons 2 participants 4 messages Jan 12, 2024 – Feb 6, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Set boot tags for the usb0 port of AM62x SK and Beagleplay

The AM62x SoC can be booted from the first USB port using DFU. Set the relevant boot tags for both

Sjoerd Simons (2):
arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0
arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0

 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 ++
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 ++
 2 files changed, 4 insertions(+)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/2 arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0

The USB0 port on the AM62x SK can be used for DFU booting. To enable that functionality mark with bootph-all.

---

 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +2 -0
index 33768c02d8eb..d59a8a4c0ea5 100644
@@ -460,6 +460,7 @@ mbox_m4_0: mbox-m4-0 {
 };
 
 &usbss0 {
+	bootph-all;
 	status = "okay";
 	ti,vbus-divider;
 };
@@ -470,6 +471,7 @@ &usbss1 {
 };
 
 &usb0 {
+	bootph-all;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	usb-role-switch;
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/2 arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0

In reply to Sjoerd Simons

The USB0 port on the beagleplay can be used for DFU booting. To enable that functionality mark with bootph-all.

---

 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +2 -0
index eadbdd9ffe37..1c243ec63dd8 100644
@@ -573,11 +573,13 @@ &mcu_i2c0 {
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 	status = "okay";
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "peripheral";
 };
 
Signature · 1 line
2.43.0
maintainer Applied
#3 lore raw
In reply to Sjoerd Simons

Hi Sjoerd Simons,

Quoted 9 lines · Sjoerd Simons

The AM62x SoC can be booted from the first USB port using DFU. Set the relevant boot tags for both

Sjoerd Simons (2):
arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0
arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0

[...]

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

[1/2] arm64: dts: ti: k3-am625-sk: Add boot phase tags for USB0

      commit: 524c8086a453b8df1002c1ccfa9f99589761fc80
[2/2] arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags for USB0
      commit: f7d2844d848f8836e6a7923e3ea426f7be4f38d1

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh